Search NASA⌕ Search

SEARCH · Search NASA

Results for “recombination centers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Defect Stability in CdTe Based on Formation Energies and Migration Barriers

Native point defects are thought to play a key role in CdTe, either as compensation centers in intentionally doped material, as a source of conductivity in nominally undoped material, or as electron–hole recombination centers. Here, the discussion of their concentration and impact has often centered only on formation energies and transition levels. Using hybrid density functional calculations, including the effects of spin–orbit coupling (SOC), we discuss the stability of native point defects in CdTe based on their formation energies and migration barriers. We show that although Cd interstitials are the lowest energy donor defects, they are unstable at room temperature due to a low migration barrier. They are important for maintaining charge neutrality during growth or annealing at high temperatures, but once the material is brought to room temperature, they are not frozen in as often assumed and are expected to anneal out, leaving the other more stable defects to determine the conductivity. Taking this into account in the solution of the charge neutrality equation, we are able to predict the conductivity type and carrier concentrations that are in good agreement with experimental observations.

14 SOLAR ENERGY↗
DOE OSTI2022

Impact of dopant-induced band tails on optical spectra, charge carrier transport, and dynamics in single-crystal CdTe

Abstract Cadmium telluride (CdTe) semiconductors are used in thin-film photovoltaics, detectors, and other optoelectronic applications. For all technologies, higher efficiency and sensitivity are achieved with reduced charge carrier recombination. In this study, we use state-of-the-art CdTe single crystals and electro-optical measurements to develop a detailed understanding of recombination rate dependence on excitation and temperature in CdTe. We study recombination and carrier dynamics in high-resistivity (undoped) and arsenic (As)-doped CdTe by employing absorption, the Hall effect, time-resolved photoluminescence, and pump-probe in the 80–600 K temperature range. We report extraordinarily long lifetimes (30 µs) at low temperatures in bulk undoped CdTe. Temperature dependencies of carrier density and mobility reveal ionization of the main acceptors and donors as well as dominant scattering by ionized impurities. We also distinguish different recombination defects. In particular, shallow As Te and deep V Cd −As Cd acceptors were responsible for p-type conductivity. AX donors were responsible for electron capture, while nonradiative recombination centers (V Cd −As Te , As 2 precipitates), and native defects (V Cd −Te Cd ) were found to be dominant in p-type and n-type CdTe, respectively. Bimolecular and surface recombination rate temperature dependencies were also revealed, with bimolecular coefficient T −3/2 temperature dependence and 170 meV effective surface barrier, leading to an increase in surface recombination velocity at high temperatures and excitations. The results of this study allowed us to conclude that enhanced crucible rotation growth of As-doped CdTe is advantageous to As activation, leading to longer lifetimes and larger mobilities and open-circuit voltages due to lower absorption and trapping.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The N‐terminal intrinsically disordered region of Ncb5or docks with the cytochrome b 5 core to form a helical motif that is of ancient origin

Abstract NADH cytochromeb 5 oxidoreductase (Ncb5or) is a cytosolic ferric reductase implicated in diabetes and neurological conditions. Ncb5or comprises cytochromeb 5 (b 5 ) and cytochromeb 5 reductase (b 5 R) domains separated by a CHORD‐Sgt1 (CS) linker domain. Ncb5or redox activity depends on proper inter‐domain interactions to mediate electron transfer from NADH or NADPH via FAD to heme. While full‐length human Ncb5or has proven resistant to crystallization, we have succeeded in obtaining high‐resolution atomic structures of theb 5 domain and a construct containing the CS andb 5 R domains (CS/b 5 R). Ncb5or also contains an N‐terminal intrinsically disordered region of 50 residues that has no homologs in other protein families in animals but features a distinctive, conserved L 34 MDWIRL 40 motif also present in reduced lateral root formation (RLF) protein in rice and increased recombination center 21 in baker's yeast, all attaching to ab 5 domain. After unsuccessful attempts at crystallizing a human Ncb5or construct comprising the N‐terminal region naturally fused to theb 5 domain, we were able to obtain a high‐resolution atomic structure of a recombinant rice RLF construct corresponding to residues 25–129 of human Ncb5or (52% sequence identity; 74% similarity). The structure reveals Trp 120 (corresponding to invariant Trp 37 in Ncb5or) to be part of an 11‐residue α‐helix (S 116 QMDWLKLTRT 126 ) packing against two of the four helices in theb 5 domain that surround heme (α2 and α5). The Trp 120 side chain forms a network of interactions with the side chains of four highly conserved residues corresponding to Tyr 85 and Tyr 88 (α2), Cys 124 (α5), and Leu 47 in Ncb5or. Circular dichroism measurements of human Ncb5or fragments further support a key role of Trp 37 in nucleating the formation of the N‐terminal helix, whose location in the N/b 5 module suggests a role in regulating the function of this multi‐domain redox enzyme. This study revealed for the first time an ancient origin of a helical motif in the N/b 5 module as reflected by its existence in a class of cytochromeb 5 proteins from three kingdoms among eukaryotes.

Biochemistry & Molecular Biology↗
DOE OSTI2023

Utility of Shockley–Read–Hall analysis to extract defect properties from semiconductor minority carrier lifetime data

The semiconductor minority carrier lifetime contains information about several important material properties, including Shockley–Read–Hall defect levels/concentrations and radiative/Auger recombination rates, and the complex relationships between these parameters produce a non-trivial temperature-dependence of the measured lifetime. It is tempting to fit temperature-dependent lifetime data to extract the properties of the Shockley–Read–Hall recombination centers; however, without a priori knowledge of the distribution of the Shockley–Read–Hall states across the bandgap, this fit problem is under-constrained in most circumstances. Shockley–Read–Hall lifetime data are not well-suited for the extraction of Shockley–Read–Hall defect levels but can be used effectively to extract minority carrier recombination lifetimes. The minority carrier recombination lifetime is observed at temperatures below 100 K in a Si-doped n-type InGaAs/InAsSb superlattice, and deviation from its expected temperature-dependence indicates that the capture cross section of the defect associated with Si-doping has an activation energy of 1.5 meV or a characteristic temperature of 17 K. This lower temperature regime is also preferrable for the analysis of the physics of defect introduction with displacement-damage-generating particle irradiation.

Physics↗
DOE OSTI2020

Defect-mediated metastability and carrier lifetimes in polycrystalline (Ag,Cu)(In,Ga)Se 2 absorber materials

Using a combination of optical and electrical measurements, we develop a model for metastable defects in Ag-alloyed Cu(In,Ga)Se 2 , one of the leading thin film photovoltaic materials. By controlling the pre-selenization conditions of the back contact prior to the growth of polycrystalline (Ag,Cu)(In,Ga)Se 2 absorbers and subsequently exposing them to various stresses (light soaking and dark-heat), we explore in this paper the nature and role of metastable defects on the electro-optical and photovoltaic performance of high-efficiency solar cell materials and devices. Positron annihilation spectroscopy indicates that dark-heat exposure results in an increase in the concentration of the selenium–copper divacancy complex (V Se –V Cu ), attributed to depassivation of donor defects. Deep-level optical spectroscopy finds a corresponding increase of a defect at Ev+0.98 eV, and deep-level transient spectroscopy suggests that this increase is accompanied by a decrease in the concentration of mid-bandgap recombination centers. Time-resolved photoluminescence excitation spectroscopy data are consistent with the presence of the V Se –V Cu divacancy complex, which may act as a shallow trap for the minority carriers. Light-soaking experiments are consistent with the V Se –V Cu optical cycle proposed by Lany and Zunger, resulting in the conversion of shallow traps into recombination states that limit the effective minority carrier recombination time (and the associated carrier diffusion length) and an increase in the doping density that limits carrier extraction in photovoltaic devices.

14 SOLAR ENERGY↗
DOE OSTI2020

Correctly Assessing Defect Tolerance in Halide Perovskites

The notion of “defect tolerance” has often been invoked to explain the excellent performance of halide perovskites in optoelectronic applications. However, this concept has not been rigorously defined or assessed. A common interpretation is that all of the energetically favorable intrinsic defects are shallow. On the basis of examples in the prototypical halide perovskite CsPbI 3 , we show that this is not the case. The antisite defects Pb I and I Pb are energetically favorable, but also have levels deep in the band gap. Still, because of strong anharmonicity, they are not efficient nonradiative recombination centers. Here, our study demonstrates how to correctly evaluate the “defect tolerance” of halide perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Large-Area (Ag,Cu)(In,Ga)Se 2 Thin-Film Solar Cells with Increased Bandgap and Reduced Voltage Losses Realized with Bulk Defect Reduction and Front-Grading of the Absorber Bandgap

The 1.24 eV bandgap, 18.8% power conversion efficiency Ag-alloyed chalcopyrite (Ag,Cu)(In,Ga)Se 2 (ACIGS) solar cells are characterized to relate voltage and efficiency improvements to electro-optical (EO) characteristics. Shockley-Read-Hall recombination center defect density, identified and characterized through deep level transient spectroscopy and time-resolved photoluminescence (TRPL), is reduced through potassium and copper treatment optimization. Concomitantly, longer minority carrier lifetimes are achieved, which increases open-circuit voltage (V OC ). Near-conduction band defects associated in earlier studies with light-induced current instability are also mitigated. Analysis of charge-carrier dynamics after single- and two-photon excitation is used to separate recombination at the front interface and in the absorber bulk. From TRPL decay simulations, the authors estimate ranges of key solar cell material characteristics: bulk carrier lifetime T bulk = 110-210 ns, charge-carrier mobility u = 110-160 cm 2 V -1 s -1 , and front interface recombination velocity S front = 700-1050 cm s -1 . This lowest-reported S front for ACIGS absorbers originates from the notched conduction band grading, which also makes the impact of the back interface recombination negligible. It is suggested in the results that solar cell performance enhancements can be made most readily with two distinct strategies: improving device architecture and reducing semiconductor defect densities. Using these approaches, power conversion efficiency in large-area solar cells is improved by 1.1% absolute.

14 SOLAR ENERGY↗
DOE OSTI2022

Impact of doped barriers on the recombination coefficients of c -plane InGaN/GaN single quantum well light-emitting diodes

Differential carrier lifetime measurements were performed on c-plane InGaN/GaN single quantum well (QW) light-emitting diodes (LEDs) of different QW indium compositions as well as with and without doped barriers. Mg-doped p-type and Si-doped n-type barriers close to the QW were used to reduce the net internal electric field in the QW, thereby improving the electron–hole wavefunction overlap on the LEDs. LEDs with doped barriers show short lifetimes and low carrier densities in the active region compared to the reference LEDs. The recombination coefficients in the ABC model were estimated based on the carrier lifetime and quantum efficiency measurements. The improvement in the radiative coefficients in the LEDs with doped barriers coupled with the blueshift of the emission wavelengths indeed indicates an enhancement in wavefunction overlap and a reduction of quantum confined Stark effect as a result of the reduced internal electric field. However, doped barriers also introduce non-radiative recombination centers and thereby increase the Shockley–Read–Hall (SRH) coefficient, although the increment is less for LEDs with high indium composition QWs. As a result, at high indium composition (22%), LEDs with doped barriers outperform the reference LEDs even though the trend is reversed for LEDs with lower indium composition (13.5%). In conclusion, despite the trade-off of higher SRH coefficients, doped barriers are shown to be effective in reducing the internal electric field and increasing the recombination coefficients.

42 ENGINEERING↗
DOE OSTI2020

Carrier recombination and diffusion in high-purity diamond after electron irradiation and annealing

Carrier-transport mechanisms are studied in high-purity diamond irradiated with 6 MeV electrons in the dose range of 10 12 –10 16 cm -2 and annealed at different temperatures up to 1450°C. Lifetimes and diffusion coefficients are extracted using two pump–probe techniques based on free-carrier absorption and transient-grating principles and then correlated with the corresponding defect evolution from spectroscopic measurements. Furthermore, the neutral monovacancy is revealed as the main carrier recombination center in the as-irradiated diamond, providing bipolar carrier lifetimes of a few nanoseconds at the highest irradiation dose. Carrier-capture cross sections are reduced during annealing as vacancies aggregate into divacancies at ≤1000°C and extended vacancy clusters at 1450°C.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Incorporating Electrochemical Halide Oxidation into Drift-Diffusion Models to Explain Performance Losses in Perovskite Solar Cells under Prolonged Reverse Bias

Partial shading of a solar module can induce a set of cells within the module to operate under reverse bias. Studies have shown that metal halide perovskite solar cells with a wide variety of compositions and contacts exhibit interesting behavior in reverse bias that includes both reversible performance loss and non-reversible degradation. In this paper, an advanced drift-diffusion approach incorporating an electrochemical term to explain the short-circuit, open circuit and fill factor losses that are experimentally measured after prolonged reverse bias is used. It is shown that holes can tunnel into the perovskite due to sharp band bending near the contact, accumulate within the bulk of the perovskite absorber, and trigger the oxidation of halides to form neutral halogens. The density of neutral halogens is much higher in reverse bias because there are hardly any electrons available to reduce the iodine. The resulting halogens act as bulk recombination centers. While the interstitial halogen density does decay when the cell is operated in forward bias, permanent degradation can occur if the iodine diffuses out of the perovskite layer. Finally, the ways in which changing parameters such as the mobile ion density or the series resistance at the contact can influence device performance and stability are discussed.

degradation↗
DOE OSTI2025

Trade‐Off Between Toxicity and Efficiency in Tin‐ versus Lead‐Based Halide Perovskites

Toxicity remains one of the major challenges that prevent Pb-based halide perovskites from widespread utilization. Ideally, non-toxic alternatives can be identified while still maintaining the superior power conversion efficiency of the Pb-based perovskite solar cells. Using the currently most promising candidate, the Sn-based halide perovskites, as an example, we show that a trade-off exists between toxicity and efficiency in the Sn- versus Pb-based halide perovskites. Indeed, the dominant nonradiative recombination center in the Sn-based halide perovskites differs from the one in its Pb-based counterparts, resulting in the nonradiative capture coefficient in CsSnI 3 being an order of magnitude higher than that in CsPbI 3 . We attribute this difference to the band alignment. Here, our results indicate that development of halide perovskites beyond the Pb and Sn bases is essential for efficient yet environmentally friendly perovskite solar cells.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Low-Dimensional Contact Layers for Enhanced Perovskite Photodiodes

Controlling defects and energy-band alignments are of paramount importance to the development of high-performance perovskite-based photodiodes. Yet, concurrent improvements in interfacial contacts and defect reduction simply by tailoring bottom contacts have not been investigated. An effective strategy is reported that can simultaneously improve energy-band alignments and structural defects by introducing low-dimensional contact (LDC) layers at the bottom interface. It is found that LDC-based perovskites considerably suppress undesirable structural defects induced by microstrains, resulting in reduced nonradiative recombination centers and improved carrier lifetimes. Additionally, the resulting LDC-based interface structures help block minority carrier injection from the electrodes by forming built-in electric fields. As a consequence, LDC-based perovskite photodiodes showed improved light detection capabilities. Finally, the result opens an avenue to yield highly efficient photodiodes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Near‐Unity Superradiant Emission from Delocalized Frenkel Excitons in a Two‐Dimensional Supramolecular Assembly

Abstract Three general effective strategies are shown to mitigate nonradiative losses in the superradiant emission from supramolecular assemblies. J‐aggregates of 5,5′,6,6′‐tetrachloro‐1,1′‐diethyl‐3,3′‐di(4–sulfobutyl)‐benzimidazolocarbocyanine (TDBC) are used to elucidate the nature of nonradiative processes. Self‐annealing at room temperature (RT), photo‐brightening, and purification of the dye monomers are shown to all lead to substantial increases in emission quantum yields (QYs) and a concomitant lengthening of the emission lifetime, with purification having the largest effect. Structural and optical measurements are used to support a microscopic model that emphasizes the deleterious effects of a small number of impurity and defect sites that serve as nonradiative recombination centers. This understanding has yielded a molecular fluorophore in solution at RT with an unprecedented combination of fast emissive lifetime and high QY. Superradiant emission with a QY of 82% and a lifetime of 174 ps is obtained from J‐aggregates of TDBC in solution at RT. This combination of high QY and fast lifetime at RT makes supramolecular assemblies of purified TDBC a model system for the study of fundamental superradiance phenomena. High QY J‐aggregates are uniquely suited for the development of applications that require high speed and high brightness fluorophores such as devices for high‐speed optical communication.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multilayer Lateral Heterostructures of Van Der Waals Crystals with Sharp, Carrier–Transparent Interfaces

Abstract Research on engineered materials that integrate different 2D crystals has largely focused on two prototypical heterostructures: Vertical van der Waals stacks and lateral heterostructures of covalently stitched monolayers. Extending lateral integration to few layer or even multilayer van der Waals crystals could enable architectures that combine the superior light absorption and photonic properties of thicker crystals with close proximity to interfaces and efficient carrier separation within the layers, potentially benefiting applications such as photovoltaics. Here, the realization of multilayer heterstructures of the van der Waals semiconductors SnS and GeS with lateral interfaces spanning up to several hundred individual layers is demonstrated. Structural and chemical imaging identifies {110} interfaces that are perpendicular to the (001) layer plane and are laterally localized and sharp on a 10 nm scale across the entire thickness. Cathodoluminescence spectroscopy provides evidence for a facile transfer of electron‐hole pairs across the lateral interfaces, indicating covalent stitching with high electronic quality and a low density of recombination centers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Supramolecular design principles in pseudohalides for high-performance perovskite solar mini modules

In this work, we reveal the role of non-covalent interactions, which are known to play important roles in supramolecular phenomena, in achieving efficient perovskite surface and grain boundary passivation. By using a series of pseudohalides, we find that trifluoroacetate (TFA - ) provides the strongest binding to iodide vacancies by means of non-covalent hydrogen bonding and dispersion interactions. By exploiting additional non-covalent dispersion and hydrophobic interactions in aromatic 3,3-diphenylpropylammonium (DPA + ), we present a dual-ion passivation strategy that not only minimizes the non-radiative recombination center and local chemical inhomogeneities but also induces preferentially oriented growth of α-FAPbI 3 lattice. Further, this leads to an outstanding power conversion efficiency (PCE) of 25.63% with an exceptional open-circuit voltage of 1.191 V in a perovskite solar cell with a small area, while perovskite solar mini modules with aperture areas of 25 and 64cm 2 achieved PCE of 22.47% (quasi-steady-state [QSS]-certified 20.50%) and 20.88%, respectively, with outstanding stability under high-humidity conditions.

14 SOLAR ENERGY↗
DOE OSTI2022

Concentric core-shell tracks and spectroscopic properties of SrTiO 3 under intense electronic excitation

A deeper understanding of the intrinsic link between the irradiation-induced microstructures and the corresponding spectroscopic properties is becoming increasingly attractive for the research fields of materials science, physics, and information technology. In this work, the structural damage response, spectroscopic features, and associated physical mechanisms of SrTiO 3 single crystals under swift heavy ion irradiation were comparatively analyzed using a combination of experimental and theoretical approaches. Corresponding to 0.11–5.00 MeV/u ion irradiation with electronic energy loss ranging from 4.0 to 29.3 keV/nm, the inelastic thermal spike calculations combined with molecular dynamics simulations are compared with the experimental observations, revealing the track fine structures (individual spherical defects with a disordered region, and discontinuous and continuous tracks consisting of an amorphous core and a disordered outer shell) and demonstrating the dominant effects of the deposition energy and lattice temperature on track damage formation and evolution; thus, two essential thresholds for defect formation of ~0.60 eV/atom and amorphous region formation of ~1.81 eV/atom were identified to better describe the concentric core-shell track structure. The enhanced nanohillock formation in the surface region is attributed to the combined action of kinetic and potential energy depositions, and the fluence dependence in regulating the hillock dimensions is also presented. The measured refractive index profiles along different crystal axes further indicate the anisotropy of irradiation-induced lattice expansion. With increasing ion fluence and damage level, the intrinsic bandgap gradually decreased, and the concentration of additional radiative recombination centers (1.81 eV, 2.31 eV, and 2.42 eV) accordingly increased in the SrTiO 3 crystal, providing the possibility of regulating related defects to achieve tunable/selective photon emission for more critical technological applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Effects of Absorber Near-Interface Compensation on Cd(Se,Te) Solar Cell Performance

Arsenic (As) has been shown to be an effective p-type dopant for CdTe, although high performance in As-doped devices remains difficult to achieve. Arsenic is prone to self-compensation in CdTe, as evidenced by the accumulation of dopant atoms in CdTe/Cd(Se,Te) near the interface with MgxZn1-xO (MZO). In this study, we use SCAPS 1D modeling software to investigate the effect of near-interface compensation, helping elucidate loss pathways in present-day As-doped devices and informing future growth directions. We consider three possible results of As accumulation: shallow donors, deep recombination centers, and a thin layer of excess acceptor accumulation. The reduction in near-interface carrier concentration caused by shallow donors is shown to improve open-circuit voltages (VOC), whereas deep levels are detrimental to all performance parameters. The thin charge layer affects capacitance-voltage (CV) measurements by reducing the depletion width while maintaining the same carrier concentration, replicating CV behavior that has been observed in actual devices. These results illustrate the importance of monitoring dopant accumulation within 100 nm of the interface, and suggest that reducing or eliminating the As concentration in this region would be beneficial. An undoped Cd(Se,Te) layer at the interface is suggested as a possible device structure to boost performance.

absorber↗
DOE OSTI2022

Effect of single atom Platinum (Pt) doping and facet dependent on the electronic structure and light absorption of Lanthanum Titanium Oxide (La 2 Ti 2 O 7 ): A Density Functional Theory study

Charge generation and separation are two key processes for semiconductor photocatalysis. Here, we use Pt as a single atom catalyst to systematically examine the facet-dependent electronic band structure and light absorption of the layered perovskite-type wide-gap semiconductor, lanthanum titanium oxide (La 2 Ti 2 O 7 , LTO) by means of density functional theory simulations. In this study, it is found that single Pt atom doping of different LTO surfaces (here, (100), (101) and (001)) can not only create states in the bandgap that would promote the formation of recombination centers, but also shift the optical absorption edge to the visible region. Interestingly, the Pt doping forms a heterojunction, with the valence band maximum consisting of Pt states and the conduction band minimum consisting of LTO states, respectively. To study the facet dependent surface activity, acetic acid (CH 3 COOH) was used as a model molecule to investigate the adsorption and charge transfer on the (101), (100) and (001) Pt-LTO surface facets. The results show that the (101) facet could enable stronger adsorption of CH 3 COOH by promoting more electron transfer during the interfacial interaction. Our theoretical findings aim to promote the design and optimization of the single atom catalysts (SACs) for photocatalytic applications and other broad catalysis systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗