Search NASA⌕ Search

SEARCH · Search NASA

Results for “reducing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Reducing Surface Recombination Velocity of Methylammonium-Free Mixed-Cation Mixed-Halide Perovskites via Surface Passivation

We control surface recombination in the mixed-cation, mixed-halide perovskite, FA0.83Cs0.17Pb(I0.85Br0.15)3, by passivating nonradiative defects with the polymerizable Lewis base (3-aminopropyl)trimethoxysilane (APTMS). We demonstrate average minority carrier lifetimes >4 µs, nearly single exponential monomolecular photoluminescence decays, and high external photoluminescence quantum efficiencies (>20%, corresponding to ~97% of the maximum theoretical quasi-Fermi-level splitting) at low excitation fluence. We confirm both the composition and valence band edge position of the FA0.83Cs0.17Pb(I0.85Br0.15)3 perovskite using multi-institutional, cross-validated, X-ray photoelectron spectroscopy and UV photoelectron spectroscopy measurements. We extend the APTMS surface passivation to higher bandgap double-cation (FA and Cs) compositions (1.7, 1.75, and 1.8 eV) as well as the widely used triple-cation (FA, MA, and Cs) composition. Finally, we demonstrate that the average surface recombination velocity decreases from ~1000 to ~10 cm/s post APTMS passivation for FA0.83Cs0.17Pb(I0.85Br0.15)3. Our results demonstrate that surface-mediated recombination is the primary nonradiative loss pathway in many methylammonium (MA)-free mixed-cation mixed-halide films with a range of different bandgaps, which is a problem observed for a wide range of perovskite active layers and reactive electrical contacts. Our study also provides insights to develop passivating molecules that help reduce surface recombination in MA-free mixed-cation mixed-halide films and indicates that surface passivation and contact engineering will enable near-theoretical device efficiencies with these materials.

14 SOLAR ENERGY↗
DOE OSTI2021

Experimental Constraints on Solid Nitride Phases in Rocky Mantles of Reduced Planets and Implications for Observable Atmosphere Compositions

Abstract Astronomical surveys have discovered thousands of transiting exoplanets, revealing that rocky planets are common in the galaxy. A planet's interior chemistry is frequently inferred by average density, described by mass‐radius (M‐R) relationships. However, M‐R relationships give rise to non‐unique interpretations of a planet's interior composition, an issue that limits our ability to characterize far‐away worlds. We present experimental and density functional theoretical results addressing the influence of an ultra‐reducing (oxygen‐poor) interior chemistry on rocky mantle phases and discuss the possible implications for atmospheric observables. We show that silicon carbide (SiC) and molecular nitrogen (N 2 ) react to form solid silicon nitride (γ‐Si 3 N 4 ) at high pressures and high temperatures in a laser‐heated diamond‐anvil cell, consistent with ab initio computations. Si 3 N 4 remains stable under extreme conditions and when quenched to ambient conditions. As SiC is a common compound found under very reducing conditions, these results indicate that nitrogen may form solid phases in an oxygen‐poor rocky planet. If, by sequestering nitrogen in a planet's mantle, the distribution of nitrogen between a planet's interior and atmosphere is altered (i.e., a nitrogen‐rich mantle and nitrogen‐poor atmosphere), these results indicate that there may be atmospheric observables connected to the mantle‐redox state of a rocky planet besides the oxygen‐containing phases ubiquitous in exoplanet literature.

Daviau, Kierstin↗
DOE OSTI2024

Reduced recombination via tunable surface fields in perovskite thin films

Here, the ability to reduce energy loss at semiconductor surfaces through passivation or surface field engineering is an essential step in the manufacturing of efficient photovoltaic (PV) and optoelectronic devices. Similarly, surface modification of emerging halide perovskites with quasi-two-dimensional (2D) heterostructures is now ubiquitous to achieve PV power conversion efficiencies (PCEs) >25%, yet a fundamental understanding to how these treatments function is still generally lacking. Here we use a unique combination of depth-sensitive nanoscale characterization techniques to uncover a tunable passivation strategy and mechanism found in perovskite PV devices that were the first to reach the >25% PCE milestone. Namely, treatment with hexylammonium bromide leads to the simultaneous formation of an iodide-rich 2D layer along with a Br halide gradient that extends from defective surfaces and grain boundaries into the bulk three-dimensional (3D) layer. This interface can be optimized to extend the charge carrier lifetime to record values >30 μs and to reduce interfacial recombination velocities to values as low as <7 cm s −1 .

Devices for energy harvesting↗
DOE OSTI2020

Reducing Communication in Graph Neural Network Training

Graph Neural Networks (GNNs) are powerful and flexible neural networks that use the naturally sparse connectivity information of the data. GNNs represent this connectivity as sparse matrices, which have lower arithmetic intensity and thus higher communication costs compared to dense matrices, making GNNs harder to scale to high concurrencies than convolutional or fully-connected neural networks. Here, we introduce a family of parallel algorithms for training GNNs and show that they can asymptotically reduce communication compared to previous parallel GNN training methods. We implement these algorithms, which are based on 1D, 1. 5D, 2D, and 3D sparse-dense matrix multiplication, using torch.distributed on GPU-equipped clusters. Our algorithms optimize communication across the full GNN training pipeline. We train GNNs on over a hundred GPUs on multiple datasets, including a protein network with over a billion edges.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Data for Sugar Accumulation Enhancement in Sorghum Stem is Associated with Reduced Reproductive Sink Strength and Increased Phloem Unloading Activity

Sweet sorghum has emerged as a promising source of bioenergy mainly due to its high biomass and high soluble sugar yield in stems. Studies have shown that loss-of-function Dry locus alleles have been selected during sweet sorghum domestication, and decapitation can further boost sugar accumulation in sweet sorghum, indicating that the potential for improving sugar yields is yet to be fully realized. To maximize sugar accumulation, it is essential to gain a better understanding of the mechanism underlying the massive accumulation of soluble sugars in sweet sorghum stems in addition to the Dry locus. We performed a transcriptomic analysis upon decapitation of near-isogenic lines for mutant (d, juicy stems, and green leaf midrib) and functional (D, dry stems and white leaf midrib) alleles at the Dry locus. Our analysis revealed that decapitation suppressed photosynthesis in leaves, but accelerated starch metabolic processes in stems. SbbHLH093 negatively correlates with sugar levels supported by genotypes (DD vs. dd), treatments (control vs. decapitation), and developmental stages post anthesis (3d vs.10d). D locus gene SbNAC074A and other programmed cell death-related genes were down regulated by decapitation, while sugar transporter-encoding gene SbSWEET1A was induced. Both SbSWEET1A and Invertase 5 were detected in phloem companion cells by RNA in situ assay. Loss of the SbbHLH093 homolog, AtbHLH093, in Arabidopsis led to a sugar accumulation increase. This study provides new insights into sugar accumulation enhancement in bioenergy crops, which can be potentially achieved by reducing reproductive sink strength and enhancing phloem unloading.

Transcriptomics↗
DOE OSTI2024

Automated Manufacturing of Grid Stiffened Panels with Radically Reduced Tooling

Grid stiffened continuous fiber reinforced composite panels are an attractive option for creating lightweight structures due to the tailorability for various applications and the resulting high specific properties. However, the panel stiffeners and stiffener intersections result in high tooling complexity and correspondingly high cost of implementation. These factors have limited the impact of such structures in the composites industry. Previous research has demonstrated the ability to produce high quality, high aspect ratio beams, representative of individual grid stiffeners, using E-glass/PET comingled tow via direct digital manufacturing. Further, prior preliminary efforts have demonstrated the potential to use the same approach to manufacture grid intersections that have continuous fiber in both directions. To expand on the previous efforts in grid stiffeners produced by direct digital manufacture with radically reduced tooling requirements, this effort compares two methods of providing positioning and consolidation, nozzle vs. roller. Both processes are based on a commingled yarn feedstock. The extrusion through a nozzle has been shown to enable grid intersection control through local variations in applied consolidation and serves as the baseline process. However, this approach requires a continuous placement path to create the complete grid stiffened panel as no mechanism for cutting and restarting has been implemented. Alternatively, a newly developed placement head incorporating cut and refeed, mounted to a 6-axis robot, offers the potential of improved path placement efficiency. The two techniques are used to produce similar grid composite stiffeners to evaluate the effectiveness of producing the grid intersections. Rate of deposition of the two end effectors are compared and the quality of the associated grid stiffeners, and intersections, are determined through measurement of geometry, fiber volume fraction and void fraction.

Engineering↗
DOE OSTI2021

Machine Learning Reduced Order Model for Cost and Emission Assessment of a Pyrolysis System

Biomass pyrolysis is a promising approach for producing economic and environmentally-friendly fuels and bioproducts. Biomass pyrolysis experiments show that feedstock properties have a significant impact on product yields and composition. Scientists are developing detailed chemical reaction mechanisms to capture the relationships between biomass composition and pyrolysis yields. These mechanisms can be computationally intensive. In this study, we investigate the use of a machine learning reduced order model (ROM) for assessing the costs and emissions of a pyrolysis biorefinery. Here, we developed a Kriging-based ROM to predict pyrolysis yields of 314 feedstock samples based on the results of a detailed chemical kinetic pyrolysis mechanism. The ROM is integrated into a chemical process model for calculating mass and energy yields in a commercial-scale (2000 tonne/day) biorefinery. The ROM estimated biofuel yields of 65 to 130 gallons per ton of dry biomass. This results in biofuel minimum fuel-selling prices of $2.62 to $5.43 per gallon and emissions of -13.62 to 145 kg of CO 2 per MJ. The ROM achieved an average mean square error of 1.8e-20 and a mean absolute error of 0.53%. These results suggest that ROMs can facilitate rapid feedstock screening for biorefinery systems.

09 BIOMASS FUELS↗
DOE OSTI2024

Magnesium Oxide Reduces Anxiety-like Behavior in Mice by Inhibiting Sulfate-Reducing Bacteria

The gut microbiota–brain axis allows for bidirectional communication between the microbes in our gastrointestinal (GI) tract and the central nervous system. Psychological stress has been known to disrupt the gut microbiome (dysbiosis) leading to anxiety-like behavior. Pathogens administered into the gut have been reported to cause anxiety. Whether commensal bacteria affect the gut–brain axis is not well understood. In this study, we examined the impact of a commensal sulfate-reducing bacteria (SRB) and its metabolite, hydrogen sulfide (H2S), on anxiety-like behavior. We found that mice gavaged with SRB had increased anxiety-like behavior as measured by the open field test. We also tested the effects of magnesium oxide (MgO) on SRB growth both in vitro and in vivo using a water avoidance stress (WAS) model. We found that MgO inhibited SRB growth and H2S production in a dose-dependent fashion. Mice that underwent psychological stress using the WAS model were observed to have an overgrowth (bloom) of SRB (Deferribacterota) and increased anxiety-like behavior. However, WAS-induced overgrowth of SRB and anxiety-like behavioral effects were attenuated in animals fed a MgO-enriched diet. These findings supported a potential MgO-reversible relationship between WAS-induced SRB blooms and anxiety-like behavior.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Giant low-field magnetocaloric effect and refrigerant capacity in reduced dimensionality EuTiO 3 multiferroics

Engineering magnetic materials into a thin film form while preserving its excellent magnetocaloric response is essential in the development of miniature magnetic coolers. We demonstrate how this can be achieved in the case of EuTiO 3 - an emerging multiferroic material. Unlike conventional cases where reduced dimensionality considerably decreased the magnetic entropy change (ΔS M ) and hence the refrigerant capacity (RC), we show the large low-field enhancements of ΔS M and RC in a ~100 nm thick nanocrystalline EuTiO 3 film (ΔS M ~ 24 J kg -1 K -1 and RC = 152 J kg -1 for μ 0 ΔH = 2T) relative to its single crystal counterpart (ΔS M ~ 17 J kg -1 K -1 and RC ~ 107 J kg -1 for μ 0 ΔH = 2T). The nanocrystalline EuTiO 3 film is an excellent candidate for cryogenic magnetic refrigeration. From our study, a new approach for improving both MCE and RC in magnetic nanomaterials is proposed, which will stimulate further research on magnetocaloric thin films and related cooling devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Capture of Iodine from Nuclear-Fuel-Reprocessing Off-Gas: Influence of Aging on a Reduced Silver Mordenite Adsorbent after Exposure to NO/NO 2

Iodine radioisotopes released during nuclear fuel reprocessing must be removed from the off-gas stream before discharge. One promising material for iodine capture is reduced silver mordenite (Ag 0 Z). Nevertheless, the adsorbent’s capacity will degrade, or age, over time when the material is exposed to other off-gas constituents. Though the overall impact of aging is known, the underlying physical and chemical processes are not. To examine these processes, Ag 0 Z samples were prepared and aged in 2% NO 2 in dry air and in 1% NO in N 2 gas streams at 150 °C for up to six months. Aged samples were then characterized using scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray absorption spectroscopy. These techniques show that aging involves two overarching processes: (i) oxidation of the silver nanoparticles present in Ag 0 Z and (ii) migration of oxidized silver into the mordenite’s inner network. Silver on the nanoparticle’s surface is oxidized through adsorption of O 2 , NO, and NO 2 . Additionally, Raman spectroscopy and X-ray absorption spectroscopy indicate that nitrates are the primary products of this adsorption. Most of these nitrates migrate into the interior of the mordenite and exchange at framework binding sites, returning silver to its unreduced state (AgZ). The remaining nitrates exist at a persistent concentration without aggregating into bulk-phase AgNO 3 . X-ray absorption spectroscopy results further indicate that iodine adsorption occurs on not just Ag 0 Z but also on AgZ and a portion of the nitrates in the system. AgZ adsorbs a sizable quantity of iodine early in the aging process, but its capacity drops rapidly over time. For well-aged samples, nitrates are responsible for up to 95% of mordenite’s iodine capacity. Overall, these results have enhanced our understanding of the aging process in silver mordenite and are expected to guide the development of superior adsorbents for the capture of radioactive iodine from reprocessing off-gas.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

CO 2 -assisted ethane oxidative dehydrogenation over MoO x catalysts supported on reducible CeO 2 –TiO 2

Supported MoO x on mixed CeO 2 –TiO 2 was investigated for the oxidative dehydrogenation of ethane (ODHE) using CO 2 as a mild oxidant. Raman spectroscopic characterization of the synthesized catalysts under dehydrated conditions suggested that surface MoO x species prefer to anchor on the crystalline domains of TiO 2 . Upon increasing the amount of CeO 2 in the mixed oxide support, significant spectral changes were observed, especially in the ~900–950 cm –1 region where Mo–O–M bonds are expected. The catalytic behaviors of Mo as opposed to pure support materials were distinct. As the ceria content in the support increased, MoO x catalysts promoted oxidative dehydrogenation pathways via the Mars–van Krevelen mechanism, while pure supports appeared to favor ethane direct dehydrogenation. Investigation of structure–function relationships via in situ Raman spectroscopic efforts revealed that adding ceria not only changed the redox properties of the support but also improved those of the deposited amorphous MoO x species. We also show that upon incorporation of ceria into the support, CO 2 directly participates in the reoxidation of the dispersed MoO x species during catalysis. Here, this effect was distinct from the participation of CO 2 in the reverse water gas shift reaction. Operando Raman spectra revealed that the presence of CO 2 prolonged the existence of the 930 cm –1 feature which appears to correlate well with the relative contribution of the oxidative versus non-oxidative pathway in ethane dehydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Reducing microgrid availability to reduce costs for coastal Puerto Rican communities

Renewable microgrids are sustainable, resilient solutions to mitigate and adapt to climate change. Making electric loads nearly 100% available (i.e., power remains on) during outages increases cost. Near 100% availability is required when human life or high-cost assets are involved, but availability can be reduced for less consequential loads leading to lower costs. This study analyses costs for photo-voltaic and lithium-ion battery microgrids with availability ranging from 0–99%. We develop a methodology to analyse three Puerto Rican coastal communities. Here, we consider power outage effects for hurricanes, earthquakes, and everyday outages. The results show cost versus availability from 0–99%. There is 27–31% cost reduction at 80% availability in comparison to 99% availability. A regression model of microgrid availability versus three ratios: 1) the annual generation to demand ratio, 2) storage to interruption energy ratio, and 3) peak storage to load ratio produced a coefficient of determination of 0.99949 with 70% of the data used for training and 30% for testing. The results can therefore be extended to other coastal Puerto Rican communities of varying sizes that have ratios within the ranges analysed in this study. This can empower decision makers to rapidly analyse designs that have availabilities well below 100%.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗