Search NASA⌕ Search

SEARCH · Search NASA

Results for “refinement criterion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Ensemble-Based Parameter Estimation in a Coupled GCM Using the Adaptive Spatial Average Method

Ensemble-based parameter estimation for a climate model is emerging as an important topic in climate research. And for a complex system such as a coupled ocean–atmosphere general circulation model, the sensitivity and response of a model variable to a model parameter could vary spatially and temporally. An adaptive spatial average (ASA) algorithm is proposed to increase the efficiency of parameter estimation. Refined from a previous spatial average method, the ASA uses the ensemble spread as the criterion for selecting “good” values from the spatially varying posterior estimated parameter values; these good values are then averaged to give the final global uniform posterior parameter. In comparison with existing methods, the ASA parameter estimation has a superior performance: faster convergence and enhanced signal-to-noise ratio.

54 ENVIRONMENTAL SCIENCES↗

A Statistical Evaluation of Rules for Biochemical Failure After Radiotherapy in Men Treated for Prostate Cancer

Purpose: The 'PSA nadir + 2 rule,' defined as any rise of 2 ng/ml above the current prostate-specific antigen (PSA) nadir, has replaced the American Society for Therapeutic Radiology and Oncology (ASTRO) rule, defined as three consecutive PSA rises, to indicate biochemical failure (BF) after radiotherapy in patients treated for prostate cancer. We propose an original approach to evaluate BF rules based on the PSAdt as the gold standard rule and on a simulation process allowing us to evaluate the BF rules under multiple settings (different frequency, duration of follow-up, PSA doubling time [PSAdt]). Methods and Materials: We relied on a retrospective, population-based cohort of individuals identified by the Connecticut Tumor Registry and treated for localized prostate cancer with radiotherapy. We estimated the 470 underlying true PSA trajectories, including the PSAdt, using a Bayesian hierarchical changepoint model. Next, we simulated realistic, sophisticated data sets that accurately reflect the systematic and random variations observed in PSA series. We estimated the sensitivity and specificity by comparing the simulated PSA series to the underlying true PSAdt. Results: For follow-up of more than 3 years, the specificity of the PSA nadir + 2 rule was systematically greater than that of the ASTRO criterion. In few settings, the nadir + 2 rule had a lower sensitivity than the ASTRO. The PSA nadir + 2 rule appeared less dependent on the frequency and duration of follow-up than the ASTRO. Conclusions: Our results provide some refinements to earlier findings as the BF rules were evaluated according to various parameters. In most settings, the PSA nadir + 2 rule outperforms the ASTRO criterion.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Enhanced rigid-bond restraints

An extension is proposed to the rigid-bond description of atomic thermal motion in crystals. The rigid-bond model [Hirshfeld (1976 ▶). Acta Cryst. A32, 239–244] states that the mean-square displacements of two atoms are equal in the direction of the bond joining them. This criterion is widely used for verification (as intended by Hirshfeld) and also as a restraint in structure refinement as suggested by Rollett [Crystallographic Computing (1970 ▶), edited by F. R. Ahmed et al., pp. 167–181. Copenhagen: Munksgaard]. By reformulating this condition, so that the relative motion of the two atoms is required to be perpendicular to the bond, the number of restraints that can be applied per anisotropic atom is increased from about one to about three. Application of this condition to 1,3-distances in addition to the 1,2-distances means that on average just over six restraints can be applied to the six anisotropic displacement parameters of each atom. This concept is tested against very high resolution data of a small peptide and employed as a restraint for protein refinement at more modest resolution (e.g. 1.7 Å)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

ORNL Evaluation of Electrabel Safety Cases for Doel 3 / Tihange 2: Final Report

Oak Ridge National Laboratory (ORNL) performed a detailed technical review of the 2015 Electrabel (EBL) Safety Cases prepared for the Belgium reactor pressure vessels (RPVs) at Doel 3 and Tihange 2 (D3/T2). The Federal Agency for Nuclear Control (FANC) in Belgium commissioned ORNL to provide a thorough assessment of the existing safety margins against cracking of the RPVs due to the presence of almost laminar flaws found in each RPV. Initial efforts focused on surveying relevant literature that provided necessary background knowledge on the issues related to the quasilaminar flaws observed in D3/T2 reactors. Next, ORNL proceeded to develop an independent quantitative assessment of the entire flaw population in the two Belgian reactors according to the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI, Appendix G, Fracture Toughness Criteria for Protection Against Failure, New York (1992 and 2004). That screening assessment of all EBL-characterized flaws in D3/T2 used ORNL tools, methodologies, and the ASME Code Case N-848, Alternative Characterization Rules for QuasiLaminar Flaws . Results and conclusions from the ORNL flaw acceptance assessments of D3/T2 were compared with those from the 2015 EBL Safety Cases. Specific findings of the ORNL evaluation of that part of the EBL structural integrity assessment focusing on stability of the flaw population subjected to primary design transients include the following: ORNL s analysis results were similar to those of EBL in that very few characterized flaws were found not compliant with the ASME (1992) acceptance criterion. ORNL s application of the more recent ASME Section XI (2004) produced only four noncompliant flaws, all due to LOCAs. The finding of a greater number of non-compliant flaws in the EBL screening assessment is due principally to a significantly more restrictive (conservative) criterion for flaw size acceptance used by EBL. ORNL s screening assessment results (obtained using an analysis methodology different from that of EBL) are interpreted herein as confirming the EBL screening results for D3/T2. ORNL s independent refined analysis demonstrated the EBL-characterized flaw 1660, which is non-compliant in the ORNL and EBL screening assessment, is rendered compliant when modeled as a more realistic individual quasi-laminar flaw using a 3-D XFEM analysis approach. ORNL s and EBL s refined analyses are in good agreement for the flaw 1660 close to the clad/base metal interface; ORNL is not persuaded that repeating this exercise for more than one non-compliant flaw is necessary to accept the EBL conclusions derived from the aggregate of EBL refined analysis results. ORNL General Conclusions Regarding the Structural Integrity Assessment (SIA) Conducted by EBL for D3/T2 Based on comparative evaluations of ORNL and EBL SIA analyses and on consideration of other results, ORNL is in agreement with the general conclusions reported by Electrabel in their RPV D3/T2 Technical Summary Note of April 14, 2015: More than 99 percent of flaws in D3/T2 meet the defined screening criterion, rendering them benign with respect to initiation in the event of a design transient. Refined analyses of non-compliant flaws from the screening assessment indicate that only 11 of the 16196 detected flaws have a critical reference-temperature material index (designated RTNDT) that implies the possibility of the initiation of cleavage fracture at some future time. For those 11 2 flaws, the calculated margin in RTNDT (a measure of acceptable embrittlement relative to end-ofservice-life conditions) is significant, being greater than 80 C. Fatigue crack growth is not a concern in the flaw-acceptability analyses. Primary stress re-evaluation confirms that the collapse pressure is more than 1.5 times the design pressure in the presence of defects detected in D3/T2. Sufficient conservatisms are built into the input data and into the different steps of the SIA; in some cases, those conservatisms are quantified and imply that additional margins exist in the SIA. Taken as a whole, the foregoing results and conclusions confirm the structural integrity of Doel 3 and Tihange 2 under all design transients with ample margin in the presence of the 16196 detected flaws.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Quantum Ergodicity on Graphs

We investigate the equidistribution of the eigenfunctions on quantum graphs in the high-energy limit. Our main result is an estimate of the deviations from equidistribution for large well-connected graphs. We use an exact field-theoretic expression in terms of a variant of the supersymmetric nonlinear {sigma} model. Our estimate is based on a saddle-point analysis of this expression and leads to a criterion for when equidistribution emerges asymptotically in the limit of large graphs. Our theory predicts a rate of convergence that is a significant refinement of previous estimates, long assumed to be valid for quantum chaotic systems, agreeing with them in some situations but not all. We discuss specific examples for which the theory is tested numerically.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear Multiobjective MPC-Based Optimal Operation of a High Consistency Refining System in Papermaking

As one of the most important unit in the papermaking industry, the high consistency (HC) refining system is confronted with challenges such as improving pulp quality, energy saving, and emissions reduction in its operation processes. Here in this correspondence, an optimal operation of HC refining system is presented using nonlinear multiobjective model predictive control strategies that aim at set-point tracking objective of pulp quality, economic objective, and specific energy (SE) consumption objective, respectively. First, a set of input and output data at different times are employed to construct the subprocess model of the state process model for the HC refining system, and then the Wiener-type model can be obtained through combining the mechanism model of Canadian Standard Freeness and the state process model that determines their structures based on Akaike information criterion. Second, the multiobjective optimization strategy that optimizes both the set-point tracking objective of pulp quality and SE consumption is proposed simultaneously, which uses NSGA-II approach to obtain the Pareto optimal set. Furthermore, targeting at the set-point tracking objective of pulp quality, economic objective, and SE consumption objective, the sequential quadratic programming method is utilized to produce the optimal predictive controllers. In conclusion, the simulation results demonstrate that the proposed methods can make the HC refining system provide a better performance of set-point tracking of pulp quality when these predictive controllers are employed. In addition, while the optimal predictive controllers orienting with comprehensive economic objective and SE consumption objective, it has been shown that they have significantly reduced the energy consumption.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

SELF-CONVERGENCE OF RADIATIVELY COOLING CLUMPS IN THE INTERSTELLAR MEDIUM

Isolated regions of higher density populate the interstellar medium (ISM) on all scales-from molecular clouds, to the star-forming regions known as cores, to heterogeneous ejecta found near planetary nebulae and supernova remnants. These clumps interact with winds and shocks from nearby energetic sources. Understanding the interactions of shocked clumps is vital to our understanding of the composition, morphology, and evolution of the ISM. The evolution of shocked clumps is well understood in the limiting 'adiabatic' case where physical processes such as self-gravity, heat conduction, radiative cooling, and magnetic fields are ignored. In this paper, we address the issue of evolution and convergence when one of these processes-radiative cooling-is included. Numeric convergence studies demonstrate that the evolution of an adiabatic clump is well captured by roughly 100 cells per clump radius. The presence of radiative cooling, however, imposes limits on the problem due to the removal of thermal energy. Numerical studies which include radiative cooling typically adopt the 100-200 cells per clump radius resolution. In this paper, we present the results of a convergence study for radiatively cooling clumps undertaken over a broad range of resolutions, from 12 to 1536 cells per clump radius, employing adaptive mesh refinement (AMR) in a two-dimensional axisymmetric geometry (2.5 dimensions). We also provide a fully three-dimensional simulation, at 192 cells per clump radius, which supports our 2.5 dimensional results. We find no appreciable self-convergence at {approx}100 cells per clump radius as small-scale differences owing to increasingly resolving the cooling length have global effects. We therefore conclude that self-convergence is an insufficient criterion to apply on its own when addressing the question of sufficient resolution for radiatively cooled shocked clump simulations. We suggest the adoption of alternate criteria to support a statement of sufficient resolution, such as the demonstration of adequate resolution of the cooling layers behind shocks. We discuss associated refinement criteria for AMR codes.

79 ASTRONOMY AND ASTROPHYSICS↗

RAPID DYNAMICAL CHAOS IN AN EXOPLANETARY SYSTEM

We report on the long-term dynamical evolution of the two-planet Kepler-36 system, which consists of a super-Earth and a sub-Neptune in a tightly packed orbital configuration. The orbits of the planets, which we studied through numerical integrations of initial conditions that are consistent with observations of the system, are chaotic with a Lyapunov time of only {approx}10 years. The chaos is a consequence of a particular set of orbital resonances, with the inner planet orbiting 34 times for every 29 orbits of the outer planet. The rapidity of the chaos is due to the interaction of the 29:34 resonance with the nearby first-order 6:7 resonance, in contrast to the usual case in which secular terms in the Hamiltonian play a dominant role. Only one contiguous region of phase space, accounting for {approx}4.5% of the sample of initial conditions studied, corresponds to planetary orbits that do not show large-scale orbital instabilities on the timescale of our integrations ({approx}200 million years). Restricting the orbits to this long-lived region allows a refinement of estimates of the masses and radii of the planets. We find that the long-lived region consists of the initial conditions that satisfy the Hill stability criterion by the largest margin. Any successful theory for the formation of this system will need to account for why its current state is so close to unstable regions of phase space.

79 ASTRONOMY AND ASTROPHYSICS↗

Hot-tearing of multicomponent Al-Cu alloys based on casting load measurements in a constrained permanent mold

Hot-tearing is a major casting defect that is often difficult to characterize, especially for multicomponent Al alloys used for cylinder head castings. The susceptibility of multicomponent Al-Cu alloys to hot-tearing during permanent mold casting was investigated using a constrained permanent mold in which the load and displacement was measured. The experimental results for hot tearing susceptibility are compared with those obtained from a hot-tearing criterion based temperature range evaluated at fraction solids of 0.87 and 0.94. The Cu composition was varied from approximately 5 to 8 pct. (weight). Casting experiments were conducted without grain refining. The measured load during casting can be used to indicate the severity of hot tearing. However, when small hot-tears are present, the load variation cannot be used to detect and assess hot-tearing susceptibility.

Sabau, Adrian S↗

Hot-Tearing Assessment of Multicomponent Nongrain-Refined Al-Cu Alloys for Permanent Mold Castings Based on Load Measurements in a Constrained Mold

The hot-tearing resistance of multicomponent Al-Cu alloys during permanent mold casting was investigated using a constrained permanent mold in which the load and temperature were measured. The nominal Cu composition was varied from 5 to 8 wt pct. Casting experiments were conducted without adding any grain-refining inoculants. The following variables, which were obtained from the measured load data during casting, were considered to assess the hot-tearing resistance of the Al-Cu multicomponent alloys: “V”-like signature in the load rate variation, load at solidus point, and load rate average over the freezing range. In addition, a hot-tearing criterion based on the variation of the fraction of solid in the late stages of solidification was used. It was found that all criteria considered can accurately predict the alloys with the lowest and highest hot-tear resistance, respectively. It was found that the rate of measured load during casting could be used to indicate substantial hot tearing. However, the load rate variation could not be used to detect when small hot tears were present. Among all the criteria considered, the load at the solidus point shows an excellent agreement with experimentally observed hot-tearing resistance for all but one alloy. The poorly resistant hot-tearing alloys exhibited mainly coarse columnar grains while the most hot-tearing resistant alloys exhibited a much more refined grain microstructure. This is the first study in which good hot-tear resistance is demonstrated for multicomponent Al-Cu alloys with nominal Cu content greater than 7 wt pct.

36 MATERIALS SCIENCE↗

A Simple Solution to a Complex Problem: Hexavalent Chromium in Landfill Storm water - 16129

Management of hexavalent chromium (Cr+6)-contaminated water at the Environmental Management Waste Management Facility (EMWMF) is a significant operational challenge, in addition to the challenges already posed by water management. The Cr+6 discharge criterion of 16 micrograms per liter (μg/L) is typically met; however, when demolition debris containing Cr+6 is received for disposal, concentrations up to 280 μg/L have been seen. The large volume of water generated at EMWMF from the 130-cm (51-in.) annual precipitation creates a complex water management problem that must be quickly addressed to maintain compliant landfill operations. The EMWMF Operations Team devised and implemented a simple, low-cost method to rapidly reduce the Cr+6 from the landfill storm water. The Cr+6 reduction system uses inexpensive, commercially available components of which the key is conventional steel wool in 760-L (200-gal) plastic bins. The Cr+6-impacted storm water is pumped through the bins, where the Cr+6 reacts with the elemental iron of the steel wool and reduces to trivalent chromium. The water then spills back into the ponds. Water is continuously recirculated through the bins until the release criterion is verified to be achieved, allowing the storm water to be discharged into the adjacent receiving stream. This cost-effective system is operated with in-house craft personnel, requiring only minimal additional training and hazard controls. The system can operate continuously with minimal intervention and has successfully processed millions of liters of storm water. The success of the initial installation has been refined over time, allowing Cr+6 reduction to proceed 24 hours a day and 7 days a week, with a Cr+6 reduction rate of about 20 μg/L per day. The system is scalable to achieve even higher reduction rates and adaptable to other metals. Through October 2015, over 65.1E6 L (17.2E6 gal) of contact water with Cr+6 above the release criterion was managed using the EMWMF system. This simple solution to a complex water management problem provides significant cost savings and operational efficiencies over traditional transportation and treatment at a water treatment facility. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Efficient Computation of Doppler-Broadened Elastic Scattering Kernel Moments Using Ladder-Operator Formulation

Anefficient routine for computing Legendre moments of the Doppler-broadened elastic scattering kernel, including resonance scattering effects, has been implemented in the ISOXML module of Griffin. Isotropic scattering in the center-of-mass system and the ideal gas model for target motion are assumed. A ladder-operator formulation is introduced to compute all Legendre moments from order 0 to N simultaneously, enabling near-linear scaling of computational cost with respect to the maximum Legendre order. A physics-based strategy for constructing outgoing energy grids has also been developed, in which a tailored base grid is combined with adaptive refinement to maintain accuracy while limiting the number of outgoing energy points. For energies between resonances, a constant cross-section model is employed to further reduce computational cost. In addition, a quantitative criterion is derived to determine isotope-wise cut-off incident energies based on a prescribed up-scattering probability coverage. For 238U, up to incident energies of approximately 75, 230, and 661 eV at 294, 900, and 2500 K (corresponding to a 2% up-scattering probability threshold), computation of P0 kernels requires 1–8 s and computation of P0–P5 kernels requires 0.4–4 min using a single thread, while maintaining 1–3% relative error in up-scattering probability. These results demonstrate that the proposed formulation enables accurate and computationally practical Doppler-broadened kernel generation for online multigroup cross-section production in Griffin.

Doppler-broadening↗

On the hydrothermal stability of Cu/SSZ-13 SCR catalysts

Cu/SSZ-13 SCR catalysts have been extensively studied in the past decade or so. Hydrothermal stability of these catalysts has been identified as the most important criterion for application. In this perspective, we describe recent atomic-level understanding of their hydrothermal stability. In particular, electron paramagnetic resonance (EPR) is shown to rather accurately quantify isolated Cu(II) ions and CuO clusters in fresh and aged catalysts to demonstrate the remarkable hydrothermal stability for Cu2+ ions located in 6-membered ring windows, and the conversion of [Cu(OH)]+ ions in Chabazite cages to CuO clusters. The hydrothermal stability difference of the two isolated Cu(II) ions is confirmed with DFT simulations and the conversion of [Cu(OH)]+ to CuO is proposed to involve formation, migration and condensation of Cu(OH)2 intermediates. The structural destructive role of CuO clusters is attributed to mesopore formation from their migration, which more severely damages the catalysts than dealumination. Finally, perspectives are given on new strategies for low-temperature NOx removal, rational design and refinement of Cu/SSZ-13, and development of new Cu/zeolite SCR catalysts with even better performance than the state-of-the-art Cu/SSZ-13. The authors gratefully acknowledge the US Department of Energy (DOE), Energy Efficiency and Renewable Energy, Vehicle Technologies Office for the support of this work. The research described in this paper was performed in the Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated for the US DOE by Battelle.

Chabazite, SSZ-13, hydrothermal aging, selective c↗

Magnetohydrodynamic modeling of the solar eruption on 2010 April 8

The structure of the coronal magnetic field prior to eruptive processes and the conditions for the onset of eruption are important issues that can be addressed through studying the magnetohydrodynamic (MHD) stability and evolution of nonlinear force-free field (NLFFF) models. This paper uses data-constrained NLFFF models of a solar active region (AR) that erupted on 2010 April 8 as initial conditions in MHD simulations. These models, constructed with the techniques of flux rope insertion and magnetofrictional relaxation (MFR), include a stable, an approximately marginally stable, and an unstable configuration. The simulations confirm previous related results of MFR runs, particularly that stable flux rope equilibria represent key features of the observed pre-eruption coronal structure very well, and that there is a limiting value of the axial flux in the rope for the existence of stable NLFFF equilibria. The specific limiting value is located within a tighter range, due to the sharper discrimination between stability and instability by the MHD description. The MHD treatment of the eruptive configuration yields a very good agreement with a number of observed features, like the strongly inclined initial rise path and the close temporal association between the coronal mass ejection and the onset of flare reconnection. Minor differences occur in the velocity of flare ribbon expansion and in the further evolution of the inclination; these can be eliminated through refined simulations. We suggest that the slingshot effect of horizontally bent flux in the source region of eruptions can contribute significantly to the inclination of the rise direction. Finally, we demonstrate that the onset criterion, formulated in terms of a threshold value for the axial flux in the rope, corresponds very well to the threshold of the torus instability in the considered AR.

79 ASTRONOMY AND ASTROPHYSICS↗

A knowledge-driven approach for crystallographic protein model completion

A novel method that uses the conformational distribution of C{sup α} atoms in known structures is used to build short missing regions (‘loops’) in protein models. An initial tree of possible loop paths is pruned according to structural and electron-density criteria and the most likely loop conformation(s) are selected and built. One of the most cumbersome and time-demanding tasks in completing a protein model is building short missing regions or ‘loops’. A method is presented that uses structural and electron-density information to build the most likely conformations of such loops. Using the distribution of angles and dihedral angles in pentapeptides as the driving parameters, a set of possible conformations for the C{sup α} backbone of loops was generated. The most likely candidate is then selected in a hierarchical manner: new and stronger restraints are added while the loop is built. The weight of the electron-density correlation relative to geometrical considerations is gradually increased until the most likely loop is selected on map correlation alone. To conclude, the loop is refined against the electron density in real space. This is started by using structural information to trace a set of models for the C{sup α} backbone of the loop. Only in later steps of the algorithm is the electron-density correlation used as a criterion to select the loop(s). Thus, this method is more robust in low-density regions than an approach using density as a primary criterion. The algorithm is implemented in a loop-building program, Loopy, which can be used either alone or as part of an automatic building cycle. Loopy can build loops of up to 14 residues in length within a couple of minutes. The average root-mean-square deviation of the C{sup α} atoms in the loops built during validation was less than 0.4 Å. When implemented in the context of automated model building in ARP/wARP, Loopy can increase the completeness of the built models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase Stability of Garnet Solid-Electrolyte Interfacing with Various Cathodes in All Solid-State Batteries

Garnet-structured Li 6.75 La 3 Zr 1.75 Ta 0.25 O 12 (LLZTO) is one of the most promising electrolyte materials for solid-state Li batteries (SS-LiB). The design and fabrication of a good cathode/electrolyte interface is an important criterion for the SS-LiB. In this work, we performed a systematic study on the impact of cathode crystal structure and chemical compositions on their chemical stabilities against the LLZTO at elevated temperatures, which are required for their adhesion during cell fabrication processes. X-ray Diffraction (XRD) and Rietveld refinement analyses revealed the chemical stabilities of various cathode materials in contact with the LLZTO. While layered LiCoO 2 cathode showed good stability in contact with LLZTO to 900 °C, LiNiO 2 or Ni-rich LiNi x Mn y Co 1–x–y O 2 (NMC) cathodes suffered from the formation of La 4 NiLiO 8 due to La-diffusion from LLZTO. Furthermore, Mn-rich LiMn 2 O 4 spinel and layered LiNi 1/3 Mn 1/3 Co 1/3 O 2 cathodes suffered from the formation of La 2 Zr 2 O 7 due to Li-diffusion and production of Li 2 MnO 3 . As a result, LiNi 0.6 Mn 0.2 Co 0.2 O 2 , having an ideal balance of Ni/Mn/Co composition, or Li 2 MnO 3 containing cathodes such as Li 1.2 Ni 0.15 Mn 0.55 Co 0.1 O 2 were found to have excellent phase stability as the cathodes for LLZTO-based SS-LiBs.

25 ENERGY STORAGE↗

Diesel production from Fischer-Tropsch: the past, the present, and new concepts

Fischer-Tropsch synthesis is technically classified into two categories, the high-temperature Fischer-Tropsch (HTFT) and the low-temperature Fischer-Tropsch (LTFT) processes. The criterion for this classification is the operating temperature of the synthesis, which ranges between 310-340{sup o}C for the HTFT process and 210-260{sup o}C for the LTFT process. A Fischer-Tropsch facility can be divided into roughly three sections, synthesis gas (syngas) generation, FT synthesis, and refining of the synthetic crude (syncrude). Fischer-Tropsch refineries differ regarding the product upgrading, and both transportation fuels and chemicals can be produced. Regarding the FT refinery history, the configuration of each refinery also reflects the requirements of the fuel specification at that time. This paper gives a condensed overview of how Fischer-Tropsch facilities changed during the last 70 years and focuses in particular on the diesel fuel produced. Some conceptual flow schemes are additionally presented with emphasis on the combined upgrading of the high boiling part of the FT product spectrum with liquids derived from coal pyrolysis. 52 refs., 14 figs., 12 tabs.

01 COAL, LIGNITE, AND PEAT↗

TH-C-17A-03: Dynamic Visualization and Dosimetry of IMRT and VMAT Treatment Plans by Video-Rate Imaging of Cherenkov Radiation in Pure Water

Purpose: A novel optical dosimetry technique for the QA and verification of intensity-modulated radiation therapy (IMRT) and volumetric-modulated arc therapy (VMAT) radiotherapy plans was investigated for the first time by capturing images of the induced Cherenkov radiation in water. Methods: An intensified CCD camera (ICCD) was used to acquire a two-dimensional (2D) projection image of the Cherenkov radiation induced by IMRT and VMAT plans, based on the Task Group 119 C-Shape geometry. Plans were generated using the Varian Eclipse treatment planning system (TPS) and delivered using 6 MV x-rays from a Varian TrueBeam Linear Accelerator (Linac) incident on a water tank. The ICCD acquisition was gated to the Linac, operated for single pulse imaging, and binned to a resolution of 512×512 pixels. The resulting videos were analyzed temporally for regions of interest (ROI) covering the planning target volume (PTV) and organ at risk (OAR) and summed to obtain an overall light distribution, which was compared to the expected dose distribution from the TPS using a gammaindex analysis. Results: The chosen camera settings resulted in data at 23.5 frames per second. Temporal intensity plots of the PTV and OAR ROIs confirmed the preferential delivery of dose to the PTV versus the OAR, and the gamma analysis yielded 95.2% and 95.6% agreement between the light distribution and expected TPS dose distribution based upon a 3% / 3 mm dose difference and distance-to-agreement criterion for the IMRT and VMAT plans respectively. Conclusion: The results from this initial study demonstrate the first documented use of Cherenkov radiation for optical dosimetry of dynamic IMRT and VMAT treatment plans. The proposed modality has several potential advantages over alternative methods including the real-time nature of the acquisition, and upon future refinement may prove to be a robust and novel dosimetry method with both research and clinical applications. NIH R01CA109558 and R21EB017559.

07 ISOTOPE AND RADIATION SOURCES↗