Using Machine Learning to Detect and Locate Rogue Devices from Time-Domain Reflectometry
Explore the source record for details and available documents.
Haas, Jason Juedes [Sandia National Laboratories (↗
SEARCH · Search NASA
Results for “reflectometry”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Influence of Grafting Density and the Ionic Environment on the Structure of Zwitterionic Brushes
Zwitterionic polymer brushes possess a high potential for applications as surface coatings, e.g., in antifouling applications. Their complex association behavior due to the coexistence of oppositely charged groups on the same monomeric unit allows for a broad variation of polarity, hydrophilicity, and the antipolyelectrolyte effect with the variation of the surrounding environment. In this study, planar polysulfobetaine brushes were investigated with neutron reflectometry (NR) and neutron spin–echo spectroscopy under grazing incidence (GINSES) to explore the brush structure and its inner dynamics perpendicular to the substrate. In particular, the effects of the substrate–initiator system and ionic strength on the structure were investigated with neutron reflectometry and a swelling by a factor of 3–5 was found in the presence of aqueous NaCl and MgCl 2 solutions compared to the dry state. During the data analysis, the applicability of a model-free evaluation was also demonstrated for the investigated polysulfobetaine brushes. Furthermore, it was found with GINSES that in contrast to neutral brushes, these polysulfobetaine brushes do not show the typical concentration fluctuations in the nanosecond time range when partially swollen with salt-free water.
36 MATERIALS SCIENCE↗
SSTDR and FDR Detection of Un-Energized and Energized Cable Anomalies Including Thermal Degradation Using Machine Learning
Historically, cables are initially qualified for nuclear power plant use for 40 years. As plants extend their operating license to 60 and 80 years, continued use of these cables must shift to a performance-based approach since it is cost prohibitive to completely replace cables that are likely still capable of performing their design function. A variety of cable tests are available and are commonly applied during outages when the cables can be taken out of service. Frequency domain reflectometry (FDR) is one of these test methods that is being more broadly accepted and used because it not only detects anomalies along the cable with a low-voltage signal that does not stress the cable insulation, but the technique also locates the anomalies. This supports follow-up local inspection and local repair or partial replacement of a damaged cable segment. Currently, FDR testing is only applied to cables that are taken out of service since the test instrument would be damaged by operational voltages. A related technology that has found some acceptance in the aircraft and rail industry is spread spectrum time domain reflectometry (SSTDR). This technology has been implemented with a custom commercial instrument by LiveWire Innovation that is designed to operate on live cables up to 1000 volts and with a bandwidth of 48 MHz. Initial evaluation by the Pacific Northwest National Laboratory (PNNL) of the Live Wire system indicated that a broader bandwidth (BW) SSTDR may be better for many kinds of flaws. This led PNNL to develop an SSTDR laboratory instrument suitable for tests up to 500 MHz bandwidth. Testing on energized cables is also desirable for online monitoring systems so an inductive clamshell coupler was developed that allows energized cables to be tested up to at least 5 kV and likely higher voltage levels. Dielectric spectroscopy and tan delta testing plus various laboratory destructive tests were included in this data acquisition campaign directed to feed a machine learning (ML) study. With these kinds of developments, online energized cable tests may be possible with industrial adoption of such hardware advances but it will be completely impractical to have highly skilled data analysts continually examine these complex signals for indications of damage or compromised conditions. If online testing is to be implemented in new test hardware, it must be accompanied by software that can interpret the signals and alert plant operators of changing or degraded conditions. The thermally aged, shielded cable investigated here was separately treated for ML analysis. Visual analysis of electrical data showed generally increasing peaks where the cable entered and exited the oven. These peaks were not exactly aligned with expected locations, but these differences were attributed to velocity of propagation calibration errors. Only supervised ML was applied to the thermally aged data as this data was only available shortly before the committed publication date of this report. The supervised ML was structured to divide the 0 to 70-day responses as ‘normal’ from 0 to 35 days or ‘anomalous’ from 36 to 70 days, based on cable tensile elongation at break (EAB) insulation characterization. Using 80% of the data for training and 20% for testing, the supervised ML predicted normal versus anomalous was 70% accurate. Important conclusions include: • Accuracy to predict the presence of cable damage is improved from the 2023 effort by more training data. Weighted accuracies for comparisons among the instruments ranged from 67 to 89 % for unsupervised ML and 71 to 99% for supervised ML. • Based on the synthetic data tests, the unsupervised models are more generalizable to unseen anomalies. The Multi-Layer Perceptron classifier (MLP) model reported as high as 99.7% accuracy on the test data, but this dropped to 58.3% when tested on the synthetic data. In contrast, the unsupervised Pointwise model only achieved 89.7% accuracy on the experimental data but reported 78.3% accuracy on the synthetic data. • The best anomaly indicators are higher frequency (400 MHz BW) FDR data. Other tests may be interesting but for this study, this was the best predicter.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Microstructural Underpinnings of Giant Intrinsic Exchange Bias in Epitaxial NiCo 2 O 4 Thin Films
Understanding intrinsic exchange bias in nominally single-component ferromagnetic or ferrimagnetic materials is crucial for simplifying related device architectures. However, the mechanisms behind this phenomenon and its tunability remain elusive, which hinders the efforts to achieve unidirectional magnetization for widespread applications. Inspired by the high tunability of ferrimagnetic inverse spinel NiCo 2 O 4 , the origin of intrinsic exchange bias in NiCo 2 O 4 (111) films deposited on Al 2 O 3 (0001) substrates are investigated. The comprehensive characterizations, including electron diffraction, X-ray reflectometry and spectroscopy, and polarized neutron reflectometry, reveal that intrinsic exchange bias in NiCo 2 O 4 (111)/Al 2 O 3 (0001) arises from a reconstructed antiferromagnetic rock-salt Ni x Co 1-x O layer at the interface between the film and the substrate due to a significant structural mismatch. Remarkably, by engineering the interfacial structure under optimal growth conditions, it can achieve exchange bias larger than coercivity, leading to unidirectional magnetization. Such giant intrinsic exchange bias can be utilized for realistic device applications. This work establishes a new material platform based on NiCo 2 O 4 , an emergent spintronics material, to study tunable interfacial magnetic and spintronic properties.
36 MATERIALS SCIENCE↗
Design of a low frequency, density profile reflectometer system for the MAST-U spherical tokamak
Validated and accurate edge profiles (temperature, density, etc.) are vitally important to the Mega Ampere Spherical Tokamak Upgrade (MAST-U) divertor and confinement effort. Density profile reflectometry has the potential to significantly add to the measurement capabilities currently available on MAST-U (e.g., Thomson scattering and Langmuir probes). This work presents the diagnostic requirements, problems, and solutions facing profile reflectometry in spherical tokamaks and MAST-U in particular. Requirements include density measurements near zero electron density in the scrape off layer region, coverage for a broad range of MAST-U plasma parameters, high time (≤10 microseconds) and spatial resolutions (≤1 cm), reliability, and identification of the plasma start frequency.
Instruments & Instrumentation↗
Observation of pedestal mode spreading into SOL and broadening of divertor particle flux width on EAST tokamak
Pedestal turbulence spreading into a crape-off layer (SOL) can be used to explain the experimentally observed strong pedestal-SOL coupling and is expected to be important for the broadening of divertor deposition profiles in future devices (Xu et al 2019 Nucl. Fusion 59 126039). In the EAST tokamak, it is found that an electromagnetic (EM) mode in the pedestal region can spread into the SOL and broaden the divertor particle flux width. Multi-channel fluctuation reflectometry is used to measure the density fluctuations at the plasma edge. The EM mode rotates in the electron diamagnetic drift direction in the lab frame with a frequency range of [40–90] kHz, toroidal mode number n= 12–13 and poloidal wavenumber k θ = 0.41 cm −1 . The mode amplitude peaks around the maximum of the pedestal density gradient. As the mode amplitude increases, the reflectometry channel in the SOL can clearly capture the mode. This result suggests that the EM mode is excited in the pedestal gradient region and spreads into the SOL. It is further found that the particle flux deposition profile in the divertor is broadened as the EM mode appears.
Energy↗
Pan-tropical daily L-band microwave land surface emissivity retrieval from GNSS-R observations
The uncertainties in microwave land surface emissivity (MLSE) measurements have long limited the use of spaceborne microwave radiometer data. As an emerging observation method, Global Navigation Satellite System Reflectometry (GNSS-R) has demonstrated great potential in several land and ocean applications. In this study, a method for obtaining daily MLSE dataset in the pan-tropical region from Cyclone GNSS (CYGNSS) observations is presented and evaluated. The CYGNSS observations are first aggregated into the Equal-Area-Scalable-Earth (EASE) 2.0 36 km grid by a combined weight function of distance, time, and signal-to-noise ratio variance. Then, the method employs a pixel-by-pixel regression algorithm to conduct the daily MLSE retrieval using reference emissivity derived from the Soil Moisture Active Passive (SMAP) brightness temperature. The CYGNSS MLSE shows good agreement with SMAP MLSE, delivering an overall root-mean-square error (RMSE) of 0.022 and 0.017 for horizontal and vertical polarization, respectively, during the training set spanning the whole year of 2018. Furthermore, on the test set from January 2019 to May 2019, the RMSE values amounted to 0.030 and 0.023 for horizontal and vertical polarization, respectively. Temperature records from the International Soil Moisture Network are employed to calculate the emissivity and for in-situ validation, which yield an RMSE of 0.034 and 0.026 for the two polarizations, respectively. The proposed algorithm provides an encouraging approach to obtain accurate daily MLSE dataset for microwave remote sensing. Compared to the SMAP MLSE, the CYGNSS MLSE has a remarkable improvement of 86% in temporal resolution, greatly complementing the existing microwave emissivity datasets.
54 ENVIRONMENTAL SCIENCES↗
High-field side scrape-off layer density profile measurements and implications for high-field side LHCD coupling in DIII-D
The high-field side (HFS) scrape-off layer (SOL) is an often under-diagnosed region of tokamak plasmas. Situated in a region with favorable curvature, the HFS SOL has minimal turbulence-induced radial transport compared to the low-field side. Using profile reflectometry, the HFS SOL density profile is measured with high temporal resolution for a wide range of DIII-D plasma discharges for the first time. The magnetic configuration, particularly the location of the secondary separatrix (SS) largely determines the HFS SOL density profile. Additionally, density perturbations induced by edge-localized modes (ELMs) are observed in the HFS SOL, and the impact of ELMs on the SOL density profile is characterized for a range of magnetic configurations. It is found that ELM-induced HFS SOL perturbations are generally localized to within the SS and ELM-induced changes to the HFS wall density are minimized in near double-null configurations. The characterization of the HFS SOL density profile on DIII-D is crucial for the effective coupling of the planned HFS lower hybrid current drive (LHCD) launcher. Experimental HFS SOL measurements are used as input to full-wave simulations of LHCD coupling. Furthermore, this work simulates the effect of the magnetic configuration on LHCD coupling. It also simulates LHCD coupling in ELMs and high q min discharges. During such discharges, the LHCD coupling is predicted to be resilient to ELM-induced SOL density perturbations.
high-field side↗
Geophysical survey associated with NEON AOP survey, East River, CO 2018
The package contains data layers developed and used in Falco et al. 2024: “EcoImaging: Advanced Sensing to Investigate Plant and Abiotic Hierarchical Spatial Patterns in Mountainous Watersheds". The package is part of the DOE Watershed Function Science Focus Area (SFA) project and includes geophysical measurements collected at the East River, Colorado, in conjunction with the National Ecological Observatory Network (NEON) Airborne Observation Platform (AOP) survey conducted in June 2018. This dataset provide soil geophysical information and were used to investigate soil-plant relationships. The dataset consists of: - NEON_2018_EMI_survey.zip: the electromagnetic induction (EMI) survey as shape-file; - NEON_plot_TDR.csv: plot‑level data from Time‑Domain Reflectometry (TDR) measurements, providing: * volumetric water content (VWC) in percent (%); * soil temperature in degrees Celsius (°C); - file level metadata (flmd.csv) - data dictionary (dd.csv) file This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231.
2018 NEON and 2025 CHESS Campaigns↗
Altermagnetic Band Splitting in 10 nm Epitaxial CrSb Thin Films
Altermagnets are a newly identified family of collinear antiferromagnets with a momentum-dependent spin-split band structure of non-relativistic origin, derived from spin-group symmetry-protected crystal structures. Among candidate altermagnets, CrSb is attractive for potential applications because of a large spin-splitting near the Fermi level and a high Néel transition temperature of around 700 K. Molecular beam epitaxy is used to synthesize CrSb (0001) thin films with thicknesses ranging from 10 to 100 nm. Structural characterization, using reflection high energy electron diffraction, scanning transmission electron microscopy, and X-ray diffraction, demonstrates the growth of epitaxial films with good crystallinity. Polarized neutron reflectometry shows the absence of any net magnetization, consistent with antiferromagnetic order. In vacuo angle resolved photoemission spectroscopy (ARPES) measurements probe the band structure in a previously unexplored regime of film thickness, down to 10 nm. These ARPES measurements show a bulk-type, 3D momentum-dependent band splitting of up to 0.7 eV with g-wave symmetry, consistent with that seen in prior studies of bulk single crystals. The distinct altermagnetic band structure required for potential spin-transport applications survives down to the ∼10 nm thin film limit at room temperature.
Santhosh, Sandra↗
Influence of plateau, slope, and valley on soil hydrology during the dry season in a Central Amazon old‐growth forest
Soil moisture regulates plant water supply and drought sensitivity in tropical forests, yet its vertical and topographic variation remains poorly characterized. We combined high-frequency time-domain reflectometry measurements from 5 to 100 cm across plateau, slope, and valley landforms at the Zona Florestal 2 research site north of Manaus, Central Amazonia, to quantify how soil moisture memory, timing of responses to rainfall, dry-down rates (τ), and soil–water depletion vary across these contrasting landforms. Landform-specific soil moisture calibration curves ensured accurate volumetric water content estimates in these highly weathered soils. During the 2023 dry-to-wet transition (August–November), soil moisture memory showed strong topographic contrasts, with valley profiles increasing from ∼47 h at 5 cm to ∼154 h at 100 cm, while plateaus exhibited higher near-surface persistence (∼124 h at 5 cm) but weaker memory at depth. Dry-down behavior reinforced these differences as valley soils exhibited τ values exceeding ∼200 h, more than double the characteristic τ of plateau soils (∼90 h). Rainfall–soil moisture correlations indicated immediate responses at shallow depths in valleys and progressively longer lags with depth on plateaus and slopes. These hydrologic patterns were mirrored in depletion profiles, which declined sharply below 30 cm on plateaus but remained high and sustained throughout the upper meter in slopes and valleys. Together, these findings provide the first depth-resolved field measurements of soil moisture memory, rainfall coupling, dry-down constants, and depletion dynamics across major upland landforms in Central Amazonia and offer clear observational benchmarks for improving land-surface and ecosystem model representations of soil–water processes.
Hillslope↗
Corroborating VNA and thermal measurements of transmission loss on the DIII-D ECH waveguide system
Electron cyclotron heating (ECH) and current drive (ECCD) will play a large role in tokamak-based fusion reactors. At the DIII-D tokamak, 110 GHz microwaves injected into the plasma can provide core heating and current drive as well as impurity control, neoclassical tearing mode mitigation, and breakdown assistance. Understanding the physics of these processes relies on accurate estimates of injected ECH power. DIII-D’s ECH system consists of six MW-class Microwave Power Products (MPP) gyrotron microwave sources. Operating the gyrotrons far from the tokamak removes them from magnetic field interference, so 31.75 mm inner-diameter corrugated waveguides transmit the microwave power the 80 m from the gyrotrons to steerable launchers in the tokamak chamber. Estimates of injected power rely on knowing the generated power at the source and then subtracting transmission loss. Conventional transmission loss measurements based on calorimetric dummy loads are onerous and only possible during extended maintenance periods. This work examines two tools that provide more flexibility for the transmission loss measurements. Furthermore, a resistive temperature detector (RTD) array installed along a waveguide measures heat lost to the transmission line, and low power time domain reflectometry (TDR) measurements with a vector network analyzer (VNA) allows loss measurements without burdensome hardware modifications.
ECH↗
Extreme Ultraviolet and Beyond Extreme Ultraviolet Lithography Using Amorphous Zeolitic Imidazolate Resists Deposited by Atomic/Molecular Layer Deposition
Amorphous zinc-imidazolate (aZnMIm) resists show potential to meet the demands for next-generation high-numerical aperture (high-NA) metal-containing extreme ultraviolet (EUV) resist materials, given their ease of deposition by atomic/molecular layer deposition (ALD/MLD) at thicknesses of 20 nm and below. Here, this study demonstrates that aZnMIm thin films, previously identified as high-resolution electron beam resists, can also function as negative-tone EUV photoresists. Water development achieves high sensitivity (5 mJ/cm 2 ) but leaves significant residue, while acetic acid development results in poor contrast. A hybrid approach─water followed by acetic acid─enables residue-free development with a sensitivity of 181 mJ/cm 2 . Dry development using 1,1,1,5,5,5-hexafluoroacetylacetone (hfacH) is also possible but shows lower sensitivity (375 mJ/cm 2 ) compared to wet development methods. EUV photoelectron spectroscopy (PES), reflectometry/EUV absorption, total electron yield (TEY), residual gas analysis (RGA), and time-of-flight secondary ion mass spectrometry (TOF-SIMS) were used to investigate the effects of EUV irradiation on aZnMIm resists. Reflectometry experiments reveal an aZnMIm EUV absorption coefficient of 6.2 μm –1 , while PES and TEY analyses show that, compared to poly(4-hydroxystyrene) (PHS), a polymer-based reference resist, aZnMIm emits more primary and secondary electrons but generates fewer slow electrons relative to its primary electron emission; its total electron yield is similar to that of poly(methyl methacrylate) (PMMA) resists. When exposed to EUV, aZnMIm predominantly outgasses H 2 , as determined by RGA. TOF-SIMS measurements demonstrate that high-dose EUV exposure only partially fragments the 2-methylimidazole (2MIm) organic linkers, unlike high-dose electron beam exposure, which is known to completely degrade them. Additionally, aZnMIm resists show promise for potential beyond EUV lithography (BEUVL) due to the presence of Zn, which provides higher sensitivity at a wavelength of 6.7 nm compared to other metal ions, such as Sn, that are currently used in the best-performing EUV metal–organic resists. TEY measurements demonstrate that aZnMIm emits nearly twice as many electrons as PHS at 6.7 nm. The BEUV TEY of aZnMIm also surpasses that of PMMA, poly(pentafluorostyrene), and poly(4-iodostyrene), with the latter two being known for their high EUV TEYs. This work provides insight into zeolitic imidazolate framework (ZIF)-based EUV and BEUV resists and highlights their potential for both wet and dry development.
lithography↗
Vitamin E Acetate Causes Softening of Pulmonary Surfactant Membrane Models
The popularity of electronic cigarettes and vaping products has launched the outbreak of a condition affecting the respiratory system of users, known as electronic-cigarette/vaping-associated lung injury (EVALI). The build-up of vitamin E acetate (VEA), a diluent of some illicit vaping oils, in the bronchoalveolar lavage of patients with EVALI provided circumstantial evidence as a target for investigation. In this work, we provide a fundamental characterization of the interaction of VEA with lung cells and pulmonary surfactant (PS) models to explore the mechanisms by which vaping-related lung injuries may be present. We first confirm the localization and uptake of VEA in pulmonary epithelial cells. Further, as PS is vitally responsible for the biophysical functions of the lungs, we explore the effect of added VEA on three increasingly complex models of PS: dipalmitoylphosphatidylcholine (DPPC), a lipid-only synthetic PS, and the biologically derived extract Curosurf. Using high-resolution techniques of small-angle X-ray scattering, small-angle neutron scattering, neutron spin–echo spectroscopy, and neutron reflectometry, we compare the molecular-scale behaviors of these membranes to the bulk viscoelastic properties of surfactant monolayer films as studied by Langmuir monolayer techniques. While VEA does not obviously alter the structure or organization of PS membranes, a consistent softening of membrane systems—regardless of compositional complexity—provides a biophysical explanation for the respiratory distress associated with EVALI and yields a new perspective on the behavior of the PS system.
59 BASIC BIOLOGICAL SCIENCES↗
Protein Adhesion on Semi-Fluorinated Polystyrene Surfaces in Static and Dynamic Measurements
Reducing protein adhesion is a critical strategy in fouling-resistant material innovation, with broad applications spanning biomedical and healthcare devices, biosensors, industrial and environmental systems, and other important technological domains. Here, in this study, we elucidated protein adhesion behavior on polystyrene-based thin films by neutron reflectometry (NR) and quartz crystal microbalance with dissipation (QCM-D), using both lysozyme and bovine serum albumin (BSA) as model proteins. To this end, semifluorinated polystyrene thin films with gradient wettability and surface energy were fabricated through dry processing using plasma oxidation and gas-phase deposition. Although it is believed that a fully fluorinated alkyl chain offers extremely low surface energy, thus rejecting foulants, and has been used in many fouling-resistant surface designs, enhanced protein–surface interactions were observed consistently in NR and QCM-D results, due to the combined effects of surface morphology and chemistry. On the contrary, depositing shorter fluorinated silane onto a hydrophilic PS surface contributed to a more homogeneous nanoscale fluorine coating, resulting in less initial protein adsorption and improved surface recovery. Comparative analysis of proteins with different sizes on the nanopatterned semifluorinated surface revealed the influence of molecular characteristics on surface interactions. Lysozyme, being smaller and more compact, showed faster adsorption kinetics and higher surface coverage but largely reversible binding, whereas BSA, with its larger and more flexible structure, formed broader and more stable interfacial layers. This study fills the gap in understanding protein adhesion within the range of hydrophobicity (water contact angle ∼90°), as current strategies often associate with extreme hydrophilic and superhydrophobic surfaces due to hydration or low-surface-energy rejection mechanisms, respectively. It also provides in-depth insights into current combinatorial fouling-resistant surface design.
Yuan, Yue [Oak Ridge National Laboratory (ORNL), O↗
Non-Altermagnetic Origin of Exchange Bias Behaviors in Incoherent RuO 2 /Fe Bilayer Heterostructures
Initially identified as a promising altermagnetic (AM) candidate, rutile RuO 2 has since become embroiled in controversy due to contradictory findings of modeling and measurements of the magnetic properties of bulk crystals and thin films. For example, despite observations of a bulk nonmagnetic state using density functional theory, neutron scattering, and muon spin resonance measurements, patterned RuO 2 Hall bars and film heterostructures display magnetotransport signatures of magnetic ordering. Among the characteristics routinely cited as evidence for AM is the observation of exchange bias (EB) in an intimately contacted Fe-based ferromagnetic (FM) layer, which can arise due to interfacial coupling with a compensated antiferromagnet. Here, within this work, the origins of this EB coupling in Ru-capped RuO 2 /Fe bilayers are investigated using polarized neutron diffraction, polarized neutron reflectometry, cross-sectional transmission electron microscopy, and super conducting quantum interference device measurements. These experiments reveal that the EB behavior is driven by the formation of an iron oxide interlayer containing Fe 3 O 4 that undergoes a magnetic transition and pins interfacial moments within Fe at low temperature. These findings are confirmed by comparable measurements of Ni-based heterostructures, which do not display EB coupling, as well as magnetometry of additional Fe/Ru bilayers that display oxide-driven EB coupling despite the absence of the epitaxial RuO 2 layer. While these results do not directly refute the possibility of AM ordering in RuO 2 thin films, they reveal that EB, and related magnetotransport phenomena, cannot alone be considered evidence of this characteristic in the rutile structure due to interfacial chemical disorder.
RuO2↗
Proximity Magnetism in Mn(Bi,Sb) 2 Te 4 –(Bi,Sb) 2 Te 3 /MnTe Natural Heterostructures
Magnetic topological insulators and their heterostructures provide significant opportunities to couple band topology with a nontrivial spin configuration for enhanced spintronic device performance, as well as designing magnetoelectric systems and functionalities. We find that Mn interdiffusion from MnTe when interfaced with (Bi,Sb) 2 Te 3 stabilizes as self-organized Mn(Bi,Sb) 2 Te 4 septuple lamellae among alternating (Bi,Sb) 2 Te 3 quintuple layers, as observed using scanning transmission electron microscopy and depth-sensitive polarized neutron reflectometry. We further demonstrate a valuable combination of magnetic and topological orders in these naturally formed Mn(Bi,Sb) 2 Te 4 –(Bi,Sb) 2 Te 3 heterostructures, which are exchange-coupled with MnTe. Magnetotransport experiments and quantum magnetism simulations reveal that, above its own Néel temperature T N ∼ 20 K, Mn(Bi,Sb) 2 Te 4 mediates the exchange field leading to an anomalous Hall effect at the (Bi,Sb) 2 Te 3 /MnTe interface, with an enhanced interfacial T N exceeding 200 K, approaching that of the bulk MnTe. This magnetic interface, in turn, allows a robust and deterministic spin–orbit torque switching without an external magnetic field at a low critical current density of 3 × 10 5 A cm –2 . The antiferromagnetically coupled architecture of Mn(Bi,Sb) 2 Te 4 –(Bi,Sb) 2 Te 3 /MnTe, featuring magnetic and topological proximity effects across a chalcogenide backbone, is rich in fundamental interface physics and holds the potential for practical applications in spintronics.
magnetic topological insulator↗
Spin switchable optical phenomena in Rashba band structures through intersystem crossing in momentum space in solution-processing 2D-superlattice perovskite film
Spin-switchable phenomena are a critical element for the development of spintronic and chiroptic devices. Herein we combine a 2D-superlattice perovskite (4,4-DFPD2PbI4) film with a ferromagnetic cobalt (Co) layer to form a multiferroic perovskite/Co interface, and demonstrate spin-switchable circularly polarized luminescence (CPL) between right-handed σ+ and left-handed σ− polarizations. When the ferromagnetic spins of Co at the Co/perovskite interface are altered between positive and negative magnetic field directions, the CPL from the 2D-superlattice perovskite switches from σ+ to σ− polarization. The magnetic field effects present a unique method to confirm that CPL is generated by the circular-orbital momentum of light-emitting excitons within Rashba band structures, eliminating artifacts involving structural birefringence. Our polarized neutron reflectometry measurements confirm a super long-range spin-orbit interaction occurring in the 2D-superlattice perovskite films. The temperature dependence of spin-switchable phenomenon indicates an extraordinarily long orbital polarization lifetime, reaching microseconds at room temperature and milliseconds at 5 K.
36 MATERIALS SCIENCE↗