Search NASA⌕ Search

SEARCH · Search NASA

Results for “reheating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Gravitational production of spin-3/2 particles during reheating

We compute the density of a spin-$\frac{3}{2}$ particle, the raritron, produced at the end of inflation due to gravitational interactions. We consider a background inflaton condensate as the source of this production, mediated by the exchange of a graviton. This production greatly exceeds the gravitational production from the emergent thermal bath during reheating. The relic abundance limit sets an absolute minimum mass for a stable raritron, though there are also model-dependent constraints imposed by unitarity. We also examine the case of gravitational production of a gravitino, taking into account the goldstino evolution during reheating. We compare these results with conventional gravitino production mechanisms.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Asymmetric reheating via inverse symmetry breaking

Asymmetric reheating is a generic requirement for models of dark sectors with light species, but its implementation is usually in tension with unique phenomenologies otherwise possible in compelling theories containing dark copies of the Standard Model. We present a simple module to implement asymmetric reheating during a Z 2 -breaking phase above some critical temperature. This reinvigorates the possibility of an exactly degenerate mirror sector and the striking phenomenology of composite particles oscillating into their mirror counterparts. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2024

Gravity as a Portal to Reheating, Leptogenesis and Dark Matter

Considering graviton as the only messenger that exists between the inflaton, the dark sector and the Standard Model (SM), we show, it is possible to simultaneously generate the observed relic density of dark matter (DM), the baryon asymmetry via leptogenesis, as well as successful reheating after inflation. Assuming the inflaton Φ oscillates in a monomial potential V(Φ) ∝ Φ k at the end of inflation, reheating via minimal gravitational interaction turns out to be excluded due to excessive production of gravitational wave (GW) energy density from inflation. We thus (a) extend the minimal model by considering a non-minimal gravitational contribution to radiation and (b)) propose an explanation for the PeV excess observed by IceCube, when the DM has an explicit Yukawa coupling to the SM leptong and Higgs. We also propose a novel scenario, where the gravitational production is a two-step process, through the production of a pair of scalars, that eventually decay into fermionic final states. Our framework gives rise to detectable primordial GW signal, that falls within the sensitivity of several proposed GW detectors.

Barman, Basabendu↗
NASA NTRS1986

Heat Pipe Precools and Reheats Dehumidified Air

Precooling and reheating by heat pipe reduces operating costs of air-conditioning. Warm air returned from air-conditioned space and cooled air supplied are precooled and reheated, respectively, by each other through a heat pipe. Heat-pipe technology brought to bear on problem of conserving airconditioning energy in hot, humid environments. Any increase in the cost of equipment due to installation of heat-pipe heat exchangers expected to be recovered in energy savings during service period of 2 years or less.

Koning, R. C.↗
NASA NTRS1991

Aspects of reheating in first-order inflation

Studied here is reheating in theories where inflation is completed by a first-order phase transition. In the scenarios, the Universe decays from its false vacuum state by bubble nucleation. In the first stage of reheating, vacuum energy is converted into kinetic energy for the bubble walls. To help understand this phase, researchers derive a simple expression for the equation of state of a universe filled with expanding bubbles. Eventually, the bubble walls collide. Researchers present numerical simulations of two-bubble collisions clarifying and extending previous work by Hawking, Moss, and Stewart. The researchers' results indicate that wall energy is efficiently converted into coherent scalar waves. Also discussed is particle production due to quantum effects. These effects lead to the decay of the coherent scalar waves. They also lead to direct particle production during bubble-wall collisions. Researchers calculate particle production for colliding walls in both sine-Gordon and theta (4) theories and show that it is far more efficient in the theta (4) case. The relevance of this work for recently proposed models of first order inflation is discussed.

Watkins, Richard↗
DOE OSTI2021

Method and apparatus for reheat steam temperature control of oxy-fired boilers

Method and system for adjusting a measured reheat outlet steam temperature (“RPV”) to approximate a reheat outlet steam temperature setpoint (“RSP”) in a boiler. An RPV is compared to an RSP. If the RPV is less than the RSP and a position of a fuel nozzle tilt (“TILTPV”) is below a high limit of the fuel nozzle tilt (“TILTHIGH”), the TILTPV is increased while a flow rate of a secondary flue gas recirculation (“SFGRPV”) is kept constant. If the RPV is less than the RSP and the TILTPV is at the TILTHIGH, the SFGRPV is increased. If the RPV is greater than the RSP and the SFGRPV is greater than a low limit of flow rate of the SFGR (“SFGRLOW”), the SFGRPV is decreased, while the TILTPV is kept constant. If the RPV is greater than the RSP and the SFGRPV is at the SFGRLOW, the TILTPV is decreased.

Lou, Xinsheng↗
DOE OSTI2020

DICE-gas turbine compound reheat combined cycle

Coal-fired Direct Injection Carbon Engine – Gas Turbine (DICE-GT) Compound-Reheat Combined Cycle (CRCC), is a combined cycle power plant comprising a multiplicity of coal-fired reciprocating internal combustion engines (RICE), which is commonly referred to by the acronym DICE (Direct Injection Carbon Engine); a natural gas-fired gas turbine (turbine and combustor); a heat recovery steam generator (HRSG); a steam turbine generator; and an integrally geared and intercooled centrifugal air compressor. Finally, the concept uses coal-water slurry/fluid in the DICE and natural gas (or hydrogen) in the gas turbine for unmatched efficiency (well above 50% net LHV) and modularity (block sizes of 120, 240 and 360 MW) with easy adaptability to carbon capture and sequestration with minimal additional cost, complexity and performance hit.

42 ENGINEERING↗
NASA NTRS1974

Computer program for thermodynamic analysis of open cycle multishaft power system with multiple reheat and intercool

A computer program to analyze power systems having any number of shafts up to a maximum of five is presented. On each shaft there can be as many as five compressors and five turbines, along with any specified number of intervening intercoolers and reheaters. A recuperator can be included. Turbine coolant flow can be accounted for. Any fuel consisting entirely of hydrogen and/or carbon can be used. The program is valid for maximum temperatures up to about 2000 K (3600 R). The system description, the analysis method, a detailed explanation of program input and output including an illustrative example, a dictionary of program variables, and the program listing are explained.

Glassman, A. J.↗
NASA NTRS1977

A preliminary study of the use of intercooling and reheat in conjunction with regeneration for aircraft turbine engines

The effect on fuel consumption of turbofans with intercooled, regenerative cycles and with intercooled, regenerative, reheat cycles was studied. The technology level for both engine and aircraft was that projected for 1985. The simulated mission was a 5556 km flight carrying 200 passengers at Mach 0.8 at 11582 min. Results indicate that these relatively complex cycles offer little, if any, fuel savings potential relative to a conventional turbofan cycle of comparable advanced technology. The intercooled, regenerative cycle yields about the same fuel economy as a conventional cycle at close to the same overall pressure ratio.

Eisenberg, J. D.↗
NASA NTRS1977

The metallic microstructures and thermal histories of severely reheated chondrites

The metallographic structures of eight severely reheated chondrites - Farmington, Ramsdorf, Orvinio, Wickenburg, Lubbock, Rose City, Arapahoe, and Tadjera - were studied using optical, SEM and electron microprobe techniques. The following metallographic criteria were used to estimate the post-shock residual temperature of the chondrites: melted metal-troilite appearance, presence of martensite, phosphorus enrichment of metal and averaging of central metal grain compositions. The presence of phosphides and secondary kamacite are due to slow post-shock cooling rates. Ni rim gradients indicate both extensive remelting of metal grains and relatively fast cooling.

Smith, B. A.↗
NASA NTRS1980

No-reheat air-conditioning

Air conditioning system, for environmentally controlled areas containing sensitive equipment, regulates temperature and humidity without wasteful and costly reheating. System blends outside air with return air as dictated by various sensors to ensure required humidity in cooled spaces (such as computer room).

Obler, H. D.↗
NASA NTRS1979

A 15kWe (nominal) solar thermal electric power conversion concept definition study: Steam Rankine reheat reciprocator system

An evaluation was made of the potential of a steam Rankine reheat reciprocator engine to operate at high efficiency in a point-focusing distributed receiver solar thermal-electric power system. The scope of the study included the engine system and electric generator; not included was the solar collector/mirror or the steam generator/receiver. A parametric analysis of steam conditions was completed leading to the selection of 973 K 12.1 MPa as the steam temperature/pressure for a conceptual design. A conceptual design was completed for a two cylinder/ opposed engine operating at 1800 rpm directly coupled to a commercially available induction generator. A unique part of the expander design is the use of carbon/graphite piston rings to eliminate the need for using oil as an upper cylinder lubricant. The evaluation included a system weight estimate of 230 kg at the mirror focal point with the condenser mounted separately on the ground. The estimated cost of the overall system is $1932 or $90/kW for the maximum 26 kW output.

Fuller, H.↗
NASA NTRS1984

Reheating the intergalactic medium under extremal conditions

Sherman (1982) commenced the investigation of a hypothetical closure density intergalactic medium (IGM) in the recombination epoch and found present acceptable temperatures in the range from 160,000 to 4,200,000 K for IGM heating. The present investigation has the objective to complete these calculations by finding extreme bounds on the reheating epoch which preceded recombination. The final results are presented in a table. Three models have been generated. The presented models suggest that a closure density IGM is constrained to be heated by a source in the range from 10 to the -31st to 10 to the -27th ergs per s per cu cm. The heating had to originate no earlier than z approximately 28.

Sherman, R. D.↗
NASA NTRS1991

Thermoelastic stress in oceanic lithosphere due to hotspot reheating

The effect of hotspot reheating on the intraplate stress field is investigated by modeling the three-dimensional thermal stress field produced by nonuniform temperature changes in an elastic plate. Temperature perturbations are calculated assuming that the lithosphere is heated by a source in the lower part of the thermal lithosphere. A thermal stress model for the elastic lithosphere is calculated by superposing the stress fields resulting from temperature changes in small individual elements. The stress in an elastic plate resulting from a temperature change in each small element is expressed as an infinite series, wherein each term is a source or an image modified from a closed-from half-space solution. The thermal stress solution is applied to midplate swells in oceanic lithosphere with various thermal structures and plate velocities. The results predict a stress field with a maximum deviatoric stress on the order of 100 MPa covering a broad area around the hotspot plume. The predicted principal stress orientations show a complicated geographical pattern, with horizontal extension perpendicular to the hotspot track at shallow depths and compression along the track near the bottom of the elastic lithosphere.

Zhu, Anning↗
NASA NTRS1992

Thermal history of chondrites - Hot accretion vs. metamorphic reheating

The thermal evolution of chondrules is investigated for the stages including primary heating through accretion to parent-body processing to determine whether the chondrules could be hot during accretion. Theoretical attention is given to whether chondrites of different petrologic types could have originated by means of hot accretion or metamorphic reheating. Data are presented from cooling-rate experiments and from calculations of heat retention required for the hot-accretion scenario. The accretion of chondrules hotter than 800 C is shown to be inconsistent with constraints on chondrule thermal evolution, in particular the slow cooling environment of chondrules vs the apparent cooling of chondrites in cold environments. It is argued that petrologic chondrites are formed by cold accretion and subsequently by metamorphic heating.

Haack, Henning↗
NASA NTRS2012

Device and Container for Reheating and Sterilization

Long-duration space missions require the development of improved foods and novel packages that do not represent a significant disposal issue. In addition, it would also be desirable if rapid heating technologies could be used on Earth as well, to improve food quality during a sterilization process. For this purpose, a package equipped with electrodes was developed that will enable rapid reheating of contents via ohmic heating to serving temperature during space vehicle transit. Further, the package is designed with a resealing feature, which enables the package, once used, to contain and sterilize waste, including human waste for storage prior to jettison during a long-duration mission. Ohmic heating is a technology that has been investigated on and off for over a century. Literature indicates that foods processed by ohmic heating are of superior quality to their conventionally processed counterparts. This is due to the speed and uniformity of ohmic heating, which minimizes exposure of sensitive materials to high temperatures. In principle, the material may be heated rapidly to sterilization conditions, cooled rapidly, and stored. The ohmic heating device herein is incorporated within a package. While this by itself is not novel, a reusable feature also was developed with the intent that waste may be stored and re-sterilized within the packages. These would then serve a useful function after their use in food processing and storage. The enclosure should be designed to minimize mass (and for NASA's purposes, Equivalent System Mass, or ESM), while enabling the sterilization function. It should also be electrically insulating. For this reason, Ultem high-strength, machinable electrical insulator was used.

Sastry, Sudhir K.↗