Search NASA⌕ Search

SEARCH · Search NASA

Results for “reversible binding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Pilot Testing of a Modular Oxygen Production System Using Oxygen Binding Adsorbents (Final Report)

In this project, RTI and Air Liquide have focused on the development of innovative oxygen separation materials and technologies based on reversibly binding of oxygen to enable smaller and cheaper air separations. In alignment with that object the team has had multiple achievements to advance the technology including: Synthesized and characterized novel M-CoSalen (RTIO2Sorb-1) material which showed a dynamic oxygen adsorption capacity in excess of 1wt%. Developed synthesis routes for RTIO2Sorb-1 with commercially relevant techniques and produced batches of 0.25kg and over 4 kg of total synthesis. Synthesized and characterized extrudate forms of the RTIO2Sorb-1 with relevant crush strength and maintained dynamic oxygen adsorption capacity in near 1wt%. Developed techniques for forming structured beds in fiber shapes with conventional materials. Developed a model for O 2 sorption processes to analyze various bed configurations and cycle parameters. Studied classic O 2 solid sorbents reported in the literature to learn oxygen binding mechanisms. Design a 10 kg/day O 2 VPSA pilot system with 2 or 4-bed operation. Completed a techno-economic analysis based on the experimental results and modeling. The overall objective of the project was to design, fabricate, and test a modular O 2 production system and perform a techno-economic analysis (TEA) after testing to determine the cost-benefit of the advanced modular air separation system. The goals of this technology development project were to achieve a bed-size factor (BSF) of less than 600 lb-adsorbent/TPD O 2 (ton/day O 2 ) (as compared with the state-of-the-art BSF of 850), and O 2 -purity greater than 95% at a cost that is projected to be equivalent or lower than the current state of the art (SOTA), commercially available large-scale cryogenic air separation systems. To achieve these goals and objective, the project team executed on (1) oxygen binding adsorbent optimization and scale up, (2) adsorbent material formation process studies to form the adsorbent material into structured beds for rapid pressure swing adsorption (PSA) cycles with low pressure drop, fast mass transfer, and low attrition, (3) cycle development studies to optimize the PSA process, and (4) develop simulation tools for rapid cycle modeling and numerical evaluation/optimization.

20 FOSSIL-FUELED POWER PLANTS↗

Performance of Single-Component CO2-Binding Organic Liquids (CO2BOLs) For Post Combustion CO2 Capture

We report the performance of multiple CO2 binding organic liquids (CO2BOLs) as solvent systems for post combustion gas capture. Alkanolguanidines and alkanolamidines are single component CO2BOLs that reversibly bind CO2 chemically as liquid zwitterionic amidinium / guanidinium alkylcarbonates. Select alkanolguanidines/alkanolamidines and guanidine/alcohol mixtures were tested for CO2 capacity and solvent lifetime. Solvent performance of these three CO2BOLs was assessed by batchwise CO2 uptake and release over multiple cycles. We report each CO2BOL’s activity and solvent durability with and without water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, characterization and performance of single-component CO2-binding organic liquids (CO2BOL) for post combustion CO2 capture

Carbon dioxide (CO2) emission to the atmosphere will increase significantly with the shift to coal powered plants for energy generation. This increase in CO2 emission will contribute to climate change. There is need to capture and sequester large amounts of CO2 emitted from these coal power plants in order to mitigate the environmental effects. Here we report the synthesis, characterization and system performance of multiple third generation CO2 binding organic liquids (CO2BOLs) as a solvent system for post combustion gas capture. Alkanolguanidines and alkanolamidines are single component CO2BOLs that reversibly bind CO2 chemically as liquid zwitterionic amidinium / guanidinium alkylcarbonates. Three different alkanolguanidines and alkanolamidines were synthesized and studied for CO2 capacity and binding energetics. Solvent performance of these three CO2BOLs was evaluated by batch-wise CO2 uptake and release over multiple cycles. Synthesis of CO2BOLs, characterization, CO2 uptake, selectivity towards CO2 as well as solvent tolerance to water will be discussed.

01 COAL, LIGNITE, AND PEAT↗

O 2 Binding Materials and highly Efficient Modular System for Oxygen Production

The overall objective of this project was to develop innovative oxygen separation materials and technologies based on using oxygen carriers in solid form to reversibly bind oxygen for efficient separation of air to produce greater than 95% purity of oxygen (O 2 ). These materials were then be made into solid adsorbents and membranes for O 2 production processes. The goal of this technology development project was to achieve a bed-factor of less than 600 lb-sorbent/TPD O 2 (tons/day O 2 ) for solid adsorbents, an O 2 /N 2 separation factor greater than 20 for membranes, and O 2 purity greater than 95% at a cost that is projected to be significantly lower than the current state-of-the-art (SOTA) small-scale, commercially available, stand-alone air separation systems. The project team performed a design case for a modular system to produce 10 TPD 95% O 2 and evaluate the cost of O 2 production using such a system.

20 FOSSIL-FUELED POWER PLANTS↗

Structural, biochemical, and biophysical characterization of idelalisib binding to phosphoinositide 3-kinase δ

Idelalisib (also known as GS-1101, CAL-101, IC489666, and Zydelig) is a PI3Kδ inhibitor that has recently been approved for the treatment of several hematological malignancies. Given its use in human diseases, we needed a clear picture of how idelalisib binds to and inhibits PI3Kδ. Here, our data show that idelalisib is a potent and selective inhibitor of the kinase activity of PI3Kδ. A kinetic characterization clearly demonstrated ATP-competitive inhibition, and several additional biochemical and biophysical assays showed that the compound binds reversibly and noncovalently to the kinase. Lastly, a crystal structure of idelalisib bound to the p110δ subunit of PI3Kδ furthers our understanding of the binding interactions that confer the potency and selectivity of idelalisib.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-temperature carbon dioxide capture in a porous material with terminal zinc hydride sites

Carbon capture can mitigate point-source carbon dioxide (CO 2 ) emissions, but hurdles remain that impede the widespread adoption of amine-based technologies. Capturing CO 2 at temperatures closer to those of many industrial exhaust streams (>200°C) is of interest, although metal oxide absorbents that operate at these temperatures typically exhibit sluggish CO 2 absorption kinetics and instability to cycling. Here, in this study, we report a porous metal–organic framework featuring terminal zinc hydride sites that reversibly bind CO 2 at temperatures above 200°C—conditions that are unprecedented for intrinsically porous materials. Gas adsorption, structural, spectroscopic, and computational analyses elucidate the rapid, reversible nature of this transformation. Extended cycling and breakthrough analyses reveal that the material is capable of deep carbon capture at low CO 2 concentrations and high temperatures relevant to postcombustion capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photochemically enhanced binding of small molecules to the tumor necrosis factor receptor-1 inhibits the binding of TNF-[alpha]

The binding of tumor necrosis factor alpha (TNF-{alpha}) to the type-1 TNF receptor (TNFRc1) plays an important role in inflammation. Despite the clinical success of biologics (antibodies, soluble receptors) for treating TNF-based autoimmune conditions, no potent small molecule antagonists have been developed. Our screening of chemical libraries revealed that N-alkyl 5-arylidene-2-thioxo-1,3-thiazolidin-4-ones were antagonists of this protein-protein interaction. After chemical optimization, we discovered IW927, which potently disrupted the binding of TNF-{alpha} to TNFRc1 (IC{sub 50} = 50 nM) and also blocked TNF-stimulated phosphorylation of I{kappa}-B in Ramos cells (IC{sub 50} = 600 nM). This compound did not bind detectably to the related cytokine receptors TNFRc2 or CD40, and did not display any cytotoxicity at concentrations as high as 100 {micro}M. Detailed evaluation of this and related molecules revealed that compounds in this class are 'photochemically enhanced' inhibitors, in that they bind reversibly to the TNFRc1 with weak affinity (ca. 40-100 mM) and then covalently modify the receptor via a photochemical reaction. We obtained a crystal structure of IV703 (a close analog of IW927) bound to the TNFRc1. This structure clearly revealed that one of the aromatic rings of the inhibitor was covalently linked to the receptor through the main-chain nitrogen of Ala-62, a residue that has already been implicated in the binding of TNF-{alpha} to the TNFRc1. When combined with the fact that our inhibitors are reversible binders in light-excluded conditions, the results of the crystallography provide the basis for the rational design of nonphotoreactive inhibitors of the TNF-{alpha}-TNFRc1 interaction.

36 MATERIALS SCIENCE↗

Surface Absorption Polarization Sensors (SAPS), Final Technical Report, Laser Probing of Immobilized SAPS Actuators Component

A novel hypothesized detection scheme for the detection of chemical agents was proposed: SAPS ``Surface-Adsorbed Polarization Sensors''. In this technique a thin layer of molecular rotors is adsorbed to a surface. The rotors can be energized by light absorption, but are otherwise locked in position or alternatively rotate slowly. Using polarized light, the adsorbed rotors are turned as an ensemble. Chemical agent (analyte) binding that alters the rotary efficiency would be detected by sensitive polarized absorption techniques. The mechanism of the SAPS detection can be mechanical, chemical, or photochemical: only a change in rotary efficiency is required. To achieve the goal of SAPS detection, new spectroscopic technique, polarized Normal Incidence Cavity Ringdown Spectroscopy (polarized NICRDS), was developed. The technique employs very sensitive and general Cavity Ringdown absorption spectroscopy along with the ability to perform polarized absorption measurements. Polarized absorption offers the ability to measure the angular position of molecular chromophores. In the new experiments a thin layer of SAPS sensors (roughly corresponding to a monolayer coverage on a surface) immobilized in PMMA. The PMMA layer is less than 100~nm thick and is spin-coated onto a flat fused-silica substrate. The new technique was applied to study the photoisomerization-driven rotary motion of a family of SAPS actuators based on a family of substituted dibenzofulvene rotors based upon 9-(2,2,2- triphenylethylidene)fluorene. By varying the substitution to include moieties such as nitro, amino, and cyano the absorption spectrum and the quantum efficiency of photoisomerization can be varied. This SAPS effect was readily detected by polarized NICRDS. The amino substituted SAPS actuator binds H+ to form an ammonium species which was shown to have a much larger quantum efficiency for photoisomerization. A thin layer of immobilized amino actuators were then shown by polarized NICRDS to have a propensity for the angular control of rotary motion to be strongly influenced by the presence of the H+ analyte: the SAPS actuators can readily detect the presence of a H+ analyte at 1 equivalent concentration. Because the total number of SAPS actuators in the probe volume of the film is small, the amount of analyte detectable can be very low. A variety of SAPS actuator structures based on dibenzofulvene rotors are possible that could bind other analytes. It appears that analyte binding that alters the electron density in the dibenzofulvene ring is sufficient to create a detectable change in the rotary efficiency. If the analyte is strongly bound to the rotor, the SAPS actuator behaves in a dosimeter mode. Weak, reversible binding would allow for monitoring of varying concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamically Tunable Memory in Two-Component Gene Circuit

Cell has the potential to remember the environmental conditions for many (10{sup 7}) generations but stochastic fluctuations set a fundamental limit on the stability of this memory. Here we explicitly take the binding-unbinding of macromolecules into account to propose a novel rationale for the protein-protein interaction in cell physiology. Based on the first-exit time and the corresponding deterministic characterization of various genetic circuits, we show that the reversible binding dynamics may stabilize non-genetically inherited cell states, providing a practical strategy for designing robust epigenetic memory.

59 BASIC BIOLOGICAL SCIENCES↗

Kinetic and structural characterization of caspase-3 and caspase-8 inhibition by a novel class of irreversible inhibitors

Because of their central role in programmed cell death, the caspases are attractive targets for developing new therapeutics against cancer and autoimmunity, myocardial infarction and ischemic damage, and neurodegenerative diseases. We chose to target caspase-3, an executioner caspase, and caspase-8, an initiator caspase, based on the vast amount of information linking their functions to diseases. Through a structure-based drug design approach, a number of novel {beta}-strand peptidomimetic compounds were synthesized. Kinetic studies of caspase-3 and caspase-8 inhibition were carried out with these urazole ring-containing irreversible peptidomimetics and a known irreversible caspase inhibitor, Z-VAD-fmk. Using a stopped-flow fluorescence assay, we were able to determine individual kinetic parameters of caspase-3 and caspase-8 inhibition by these inhibitors. Z-VAD-fmk and the peptidomimetic inhibitors inhibit caspase-3 and caspase-8 via a three-step kinetic mechanism. Inhibition of both caspase-3 and caspase-8 by Z-VAD-fmk and of caspase-3 by the peptidomimetic inhibitors proceeds via two rapid equilibrium steps followed by a relatively fast inactivation step. However, caspase-8 inhibition by the peptidomimetics goes through a rapid equilibrium step, a slow-binding reversible step, and an extremely slow inactivation step. The crystal structures of inhibitor complexes of caspases-3 and -8 validate the design of the inhibitors by illustrating in detail how they mimic peptide substrates. One of the caspase-8 structures also shows binding at a secondary, allosteric site, providing a possible route to the development of noncovalent small molecule modulators of caspase activity.

36 MATERIALS SCIENCE↗

Production of bioactive recombinant human Eb-peptide of pro-IGF-I and identification of binding components from the plasma membrane of human breast cancer cells (MDA-MB-231)

Highlights: • A bioactive recombinant E-peptide of human pro-IGF-I (hEb-peptide) with a purity over 95% was prepared. • The recombinant human E-peptide binds reversibly membrane proteins of human breast carcinoma cells, MDA-MB-231. • By employing two dimension polyacrylamide gel electrophoresis and MALDI-MS/MS analysis, we have isolated and identified eight protein molecules bound reversibly with the hEb-peptide from the membrane preparation of MDA-MB-231 cells. E-peptide of the pro-Insulin-like growth factor-I (pro-IGF-I) is produced from pre-pro-IGF-I by proteolytic cleavage in the post-translational processing. The human Eb-peptide (hEb-peptide), derived from the E domain of pro-IGF-IB isoform, is a bioactive molecule whose exact physiological role remains elusive. Accumulated evidence reported from our laboratory indicated that hEb-peptide possesses activity against multiple hallmark characteristics of solid tumor in different cancer cell types. In human breast carcinoma cells (MDA-MB-231), it was demonstrated that hEb-peptide can promote cell attachment to substratum, inhibit colony formation in a semisolid medium, reduce cancer cell invasion, and inhibit cancer-induced angiogenesis. Like the action of other peptide hormones, these cellular responses triggered by hEb may be initiated through binding to a receptor molecule residing on the surface of the cell. Our laboratory and the others have previously provided evidence demonstrating the existence of hEb-peptide specific binding components residing on the cell membrane. In this study, we report the isolation and identification of eight protein molecules bound reversibly with hEb-peptide from the membrane preparation of MDA-MB-231 cells. Some of the identified proteins are known to be present at cell surface and function as receptors while the others are not. The functions of these molecules reveal strong correlation with the demonstrated activities of hEb-peptide on MDA-MB-231cells, suggesting hEb-peptide activity on cancer cells might be mediated by these molecules.

60 APPLIED LIFE SCIENCES↗

Evolution of Thyroglobulin Loop Kinetics in EpCAM

Epithelial cell-activating molecule (EpCAM) is an important cancer biomarker and therapeutic target given its elevated expression in epithelial cancers. EpCAM is a type I transmembrane protein that forms cis-dimers along the thyroglobulin type-1A-like domain (TYD) in the extracellular region. The thyroglobulin loop (TY loop) within the TYD is structurally dynamic in the monomer state of human EpCAM, binding reversibly to a TYD site. However, it is not known if this flexibility is prevalent across different species. Here, we conduct over 17 μs of all-atom molecular dynamics simulations to study EpCAM TY loop kinetics of five different species, including human, mouse, chicken, frog, and fish. We find that the TY loop remains dynamic across evolution. In addition to the TYD binding site, we discover a second binding site for the TY loop in the C-terminal domain (CTD). Calculations of the dissociation rate constants from the simulation trajectories suggest a differential binding pattern of fish EpCAM and other organisms. Whereas fish TY loop has comparable binding for both TYD and CTD sites, the TY loops of other species preferably bind the TYD site. A hybrid construct of fish EpCAM with human TY loop restores the TYD binding preference, suggesting robust effects of the TY loop sequence on its dynamic behavior. Our findings provide insights into the structural dynamics of EpCAM and its implication in physiological functions.

59 BASIC BIOLOGICAL SCIENCES↗

The crystal-crystal transition in hydrogenated ring-opened polynorbornenes: Tacticity, crystal thickening, and alignment

At a temperature T cc well below its melting point T m , hydrogenated ring-opened polynorbornene (hPN) is known to exhibit a crystal-crystal transition; above T cc , the hPN chains are rotationally disordered. This transition is examined in a series of hPNs polymerized with different Mo- and Ru-based catalysts, each of which imparts a slightly different tacticity to the polymer. T cc is found to correlate well with the ratio of meso to racemo dyads (m:r); small changes in m:r (from 0.8 to 1.1) are sufficient to raise T cc by nearly 20 °C. For the homogeneous Mo-based 'Schrock-type' catalyst examined, such a change in m:r is easily achieved by simply adding the reversibly binding ligand trimethylphosphine during polymerization. T cc approaches T m with increasing m:r, indicating that r dyads stabilize the rotationally disordered structure. When heated above T cc , hPN crystals thicken at a rate much greater than conventional three-dimensionally ordered crystals, but below the rates shown by the two-dimensional hexagonal (columnar) phase formed by some polymers, reflecting the intermediate level of order and chain mobility present in the high-temperature hPN crystal phase. Solid-state processing of hPN between T cc and T m yields highly aligned macroscopic specimens.

36 MATERIALS SCIENCE↗

Bis-(2-Hydroxybenzylidene)-1H-Pyrazole 3,5-Dicarbohydrazide as a Novel Chemosensor for the Detection of Endogenous Zinc: A Fluorometric Study

The study reports synthesis and photophysical studies of a new zinc sensing pyrazole scaffold structurally characterized to be bis(2-hydroxybenzylidene)-1H-pyrazole-3,5-dicarbohydrazide (PHSA). Excitation of the probe at 330 nm results in an emission band at 417 nm which ratiometrically red shifts to 466 nm upon Zn{sup 2+} addition in an unprecedented way. The photo induced electron transfer (PET) coupled intramolecular charge transfer (ICT) working for a dual-channel fluorescence emission pathway is observed and studies were supported with density functional theory and NMR titration experiments. The probe exhibited dissociation constant of 1.2156 and detection limit as low as 992 nM. The cytotoxic effects of the probe on 60 tumour cell lines were tested. The intracellular zinc sensing with reversible binding potential is verified with fluorescence microscopy experiment.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effects of temperature and carbon source on the isotopic fractionations associated with O 2 respiration for 17 O/ 16 O and 18 O/ 16 O ratios in E. coli

18 O/ 16 O and 17 O/ 16 O ratios of atmospheric and dissolved oceanic O 2 are used as biogeochemical tracers of photosynthesis and respiration. Critical to this approach is a quantitative understanding of the isotopic fractionations associated with production, consumption, and transport of O 2 in the ocean both at the surface and at depth. We made measurements of isotopic fractionations associated with O 2 respiration by E. coli . Our study included wild-type strains and mutants with only a single respiratory O 2 reductase in their electron transport chains (either a heme-copper oxygen reductase or a bd oxygen reductase). We tested two common assumptions made in interpretations of O 2 isotope variations and in isotope-enabled models of the O 2 cycle: (i) laboratory-measured respiratory 18 O/ 16 O isotopic fractionation factors ( 18 α) of microorganisms are independent of environmental and experimental conditions including temperature, carbon source, and growth rate; And ( ii ) the respiratory ‘mass law’ exponent, θ, between 18 O/ 16 O and 17 O/ 16 O, 17α = ( 18 α) θ , is universal for aerobic respiration. Results demonstrated that experimental temperatures have an effect on both 18α and θ for aerobic respiration. Specifically, lowering temperatures from 37 to 15 °C decreased the absolute magnitude of 18 α by 0.0025 (2.5‰), and caused the mass law slope to decrease by 0.005. We propose a possible biochemical basis for these variations using a model of O 2 reduction that incorporates two isotopically discriminating steps: the reversible binding and unbinding of O 2 to a terminal reductase, and the irreversible reduction of that O 2 to water. In conclusion, we cast our results in a one-dimensional isopycnal reaction-advection-diffusion model, which demonstrates that enigmatic δ 18 O and Δ 17 O variations of dissolved O 2 in the dark ocean can be understood by invoking the observed temperature dependence of these isotope effects.

58 GEOSCIENCES↗

Functional stimuli-responsive polymers on micro- and nano-patterned interfaces

Micro- and nano-patterned surfaces offer precise control over morphology and chemical composition, enhancing the stability, durability, and functionality of coating materials. When combined with stimuli-responsive polymers, these surfaces gain dynamic adaptability, enabling reversible binding, reusable sensing, and selective molecular capture. Furthermore, while recent review articles have explored various aspects of stimuli-responsive materials, from hydrogel patterns for bioanalytical applications to shape-morphing hydrogels for soft robotics and sensors, a comprehensive review focused on the integration of smart polymers with micro- or nano-patterned interfaces remains absent. This review addresses key surface patterning techniques, including soft lithography, colloidal lithography, and polymer brush photolithography, as well as advances in surface-initiated polymerization methods, such as surface-initiated controlled radical polymerization (SI-CRP). In addition, we discuss recent progress in integrating stimuli-responsive polymers with patterned surfaces to create advanced, functional materials.

Colloidal lithography↗