Search NASA⌕ Search

SEARCH · Search NASA

Results for “ring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Model 9975 O-Ring Fixture Long-Term Leak Performance (FY2022 Status Report)

Leak testing experiments to monitor the aging performance of Viton® GLT and GLT-S O-rings used in the model 9975 shipping package has been ongoing since 2004 at Savannah River National Laboratory. Seventy tests using mock-up 9975 primary containment vessels (PCVs) with GLT O-rings were assembled and heated to temperatures ranging from 200 to 450 °F. Due to material substitution, fourteen tests with GLT-S O-rings were initiated in 2008 and heated to temperatures ranging from 200 to 400 °F. The conditioning temperatures are elevated compared to the calculated maximum O-ring temperature in a 9975 package in storage, 158 °F, to accelerate aging and enable observations of O-ring failures in a reasonable time frame. The fixtures are leak tested periodically and all GLT O-ring fixtures aging at 350 °F or above have failed to maintain a leak-tight seal. Eight GLT O-ring fixtures aging at 300 °F have failed after 2.8 to 5.7 years at temperature while the remaining fixtures at 300 °F were retired from testing following more than five years without failure. There has been one GLT O-ring fixture which failed after 13.4 years aging at 200 °F. However, 20 other GLT O-rings aging at 200 °F have remained leak-tight for over 14 years and remain in test. No failures have yet been observed in GLT O-ring fixtures aging at 270 °F for 10.4 years. All GLT-S O-ring fixtures aging at 300 °F or above have failed their leak test. No failures have yet been observed in GLT-S O-ring fixtures aging at 250 °F for 12.5 years. This year, one GLT-S O-ring fixture failed after 12.4 years aging at 200 °F. Data from the O-ring fixtures are generally consistent with results from compression stress-relaxation testing, and provide confidence in the predictive models based on those results. However, uncertainty exists in extrapolating these elevated temperature results to the lower temperatures of interest for normal storage in K-Area Complex (KAC). Oxygen consumption testing, which includes results from temperatures near KAC normal storage temperatures, is ongoing to provide further confidence and corroborate these extrapolations. The collective data from these test efforts suggest the minimum O-ring service life at KAC normal storage conditions should be at least 34 years for GLT and GLT-S O-rings. Measurement of compression set in O-rings removed from failed fixtures, compared to that from KAC surveillance O-rings, indicate significant margin remains for O-rings still in service in 9975 packages in KAC. Aging and periodic leak testing will continue for the remaining 25 mock-up PCV fixtures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Model 9975 O Ring Fixture LongTerm Leak Performance (FY2021 Status Report)

Leak testing experiments to monitor the aging performance of Viton® GLT and GLT-S O-rings used in the model 9975 shipping package has been ongoing since 2004 at Savannah River National Laboratory. Seventy tests using mock-up 9975 primary containment vessels (PCVs) with GLT O-rings were assembled and heated to temperatures ranging from 200 to 450 °F. Due to material substitution, fourteen tests with GLT-S O-rings were initiated in 2008 and heated to temperatures ranging from 200 to 400 °F. The conditioning temperatures are elevated compared to the calculated maximum O-ring temperature in a 9975 package in storage, 158 °F, to accelerate aging and enable observations of O-ring failures in a reasonable time frame. The fixtures are leak tested periodically and all GLT O-ring fixtures aging at 350 °F or above have failed to maintain a leak-tight seal. Eight GLT O-ring fixtures aging at 300 °F have failed after 2.8 to 5.7 years at temperature while the remaining fixtures at 300 °F were retired from testing following more than five years without failure. There has been one GLT O-ring fixture which failed after 13.4 years aging at 200 °F. However, 19 other GLT O-rings aging at 200 °F have remained leak-tight for over 14 years and remain in test. No failures have yet been observed in GLT O-ring fixtures aging at 270 °F for 9.5 years. All GLT-S O-ring fixtures aging at 300 °F or above have failed their leak test. No failures have yet been observed in GLT-S O-ring fixtures aging at 200 and 250 °F for 11.5 years. Data from the O-ring fixtures are generally consistent with results from compression stress-relaxation testing, and provide confidence in the predictive models based on those results. However, uncertainty exists in extrapolating these elevated temperature results to the lower temperatures of interest for normal storage in K-Area Complex (KAC). Oxygen consumption testing, which includes results from temperatures near KAC normal storage temperatures, is ongoing to provide further confidence and corroborate these extrapolations. The collective data from these test efforts suggest the minimum O-ring service life at KAC normal storage conditions should be at least 34 years for GLT and GLT-S O-rings. Measurement of compression set in O-rings removed from failed fixtures, compared to that from KAC surveillance O-rings, indicate significant margin remains for O-rings still in service in 9975 packages in KAC. Aging and periodic leak testing will continue for the remaining 26 mock-up PCV fixtures.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Model 9975 O-Ring Fixture Long-Term Leak Performance (FY2020 Status Report)

Leak testing experiments to monitor the aging performance of Viton GLT and GLT-S O-rings used in the model 9975 shipping package has been ongoing since 2004 at Savannah River National Laboratory. Seventy tests using mock-up 9975 primary containment vessels (PCVs) with GLT O-rings were assembled and heated to temperatures ranging from 200 to 450 °F. In addition, fourteen tests with GLT-S O-rings were initiated in 2008 and heated to temperatures ranging from 200 to 400 °F. The conditioning temperatures are elevated compared to the calculated maximum O-ring temperature in a 9975 package in storage, 158 °F, to accelerate aging and enable observations of O-ring failures in a reasonable time frame. The fixtures are leak tested periodically and all GLT O-ring fixtures aging at 350 °F or above have failed to maintain a leak-tight seal. Eight GLT O-ring fixtures aging at 300 °F have failed after 2.8 to 5.7 years at temperature while the remaining fixtures at 300 °F were retired from testing following more than five years without failure. No failures have yet been observed in GLT O-ring fixtures aging at 200 °F for 12 to 14 years or aging at 270 °F for 8.5 years. All GLT-S O-ring fixtures aging at 300 °F or above have failed their leak test. No failures have yet been observed in GLT-S O-ring fixtures aging at 200 and 250 °F for 10 to 10.5 years. Data from the O-ring fixtures are generally consistent with results from compression stress-relaxation testing, and provide confidence in the predictive models based on those results. However, uncertainty exists in extrapolating these elevated temperature results to the lower temperatures of interest for normal storage in K-Area Complex (KAC). Oxygen consumption testing, which includes results from temperatures near KAC normal storage temperatures, is ongoing to provide further confidence and corroborate these extrapolations. The collective data from these test efforts suggest the minimum O-ring service life at KAC normal storage conditions should be at least 34 years for GLT and GLT-S O-rings. Measurement of compression set in O-rings removed from failed fixtures, compared to that from KAC surveillance O-rings, indicates margin remains for O-rings still in service. Aging and periodic leak testing will continue for the remaining PCV fixtures.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Adherens junctions are involved in polarized contractile ring formation in dividing epithelial cells of Xenopus laevis embryos

Highlights: • The actomyosin contractile ring formation is polarized in epithelial cells. • Activation of the contractile ring is polarized in epithelial cells. • Adherens junctions are involved in the kinetics of the contractile ring formation. • Adherens junctions and the contractile ring are linked from the onset of cytokinesis. • High temporal resolution microscopy of epithelial cells in the Xenopus embryos. Cells dividing in the plane of epithelial tissues proceed by polarized constriction of the actomyosin contractile ring, leading to asymmetric ingression of the plasma mem brane. Asymmetric cytokinesis results in the apical positioning of the actomyosin contractile ring and ultimately of the midbody. Studies have indicated that the contractile ring is associated with adherens junctions, whose role is to maintain epithelial tissue cohesion. However, it is yet unknown when the contractile ring becomes associated with adherens junctions in epithelial cells. Here, we examined contractile ring formation and activation in the epithelium of Xenopus embryos and explored the implication of adherens junctions in the contractile ring formation. We show that accumulation of proteins involved in contractile ring formation and activation is polarized, starting at apical cell-cell contacts at the presumptive division site and spreading within seconds towards the cell basal side. We also show that adherens junctions are involved in the kinetics of contractile ring formation. Our study reveals that the link between the adherens junctions and the contractile ring is established from the onset of cytokinesis.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

MEMS-tunable optical ring resonator

A microelectromechanical systems (MEMS)-tunable optical ring resonator is described herein. The ring resonator includes a resonator ring and a tuner ring, along with one or more springs. The springs may be internal or external, i.e., either within or outside the areal footprint of the resonator ring and the tuner ring. The one or more springs are configured to displace the tuner ring from the resonator ring by a desired gap based upon a desired resonant wavelength of the resonator ring. Tuning is implemented by applying a voltage to the ring resonator, with motion of the tuner ring causing a corresponding change in the effective index of the resonator ring. As the ring resonator is essentially a capacitive device, it draws very little power once tuning is achieved.

Wood, Michael↗
DOE OSTI2021

Transformation of an Embedded Five-Membered Ring in Polycyclic Aromatic Hydrocarbons via the Hydrogen-Abstraction–Acetylene-Addition Mechanism: A Theoretical Study

Five-membered rings are constituents of many polycyclic aromatic hydrocarbons (PAHs) and their presence on the edges of large PAHs has been repeatedly observed experimentally. However, modern kinetic combustion models often do not consider the growth of PAHs through the transformation of the five-membered rings. Here, in connection with the above, we carried out a theoretical study of the mechanism of Hydrogen-Abstraction-aCetylene-Addition (HACA) transformation of an embedded five-membered ring on the armchair PAH edge to a six-membered ring, considering cyclopenta[d,e,f]phenanthrene (4,5-methylenephenanthrene) as a prototype system for this process. The potential energy surface for the reactions of cyclopenta[d,e,f]phenanthrenyl radicals produced by direct H abstractions from cyclopenta[d,e,f]phenanthrene with acetylene has been compiled at the G3(MP2,CC)//B3LYP/6-311G(d,p) level of theory including zero-point vibrational energy corrections. The computed energies and molecular parameters were then used to solve the Rice-Ramsperger-Kassel-Marcus Master Equation (RRKM-ME) in order to calculate reaction rate at various pressures and temperatures, which were fitted to modified Arrhenius equation for further kinetic modeling. The results show that the HACA transformation of the embedded five-membered ring to a six-membered ring is possible, albeit slow. The most viable reaction mechanism involves the R2 + C 2 H 2 reaction, where the acetylene molecules adds to a σ-radical in the six-membered ring adjacent to the five-membered ring via a low entrance barrier. The predominant product of R2 + C 2 H 2 is predicted to be 3 ethynyl 4H cyclopenta[def]phenanthrene Pr5 via immediate H elimination from the initial addition complex. Next, Pr5 undergoes H-assisted isomerization to 4aH-pentaleno[4,3,2,1-cdef]phenanthrene Pr4, and the latter adds an H atom eventually forming the 1-pyrenylmethyl radical Pr3: R2 + C 2 H 2 ⇌ 3 ethynyl 4H cyclopenta[def]phenanthrene (Pr5) + H ⇌ 4aH-pentaleno[4,3,2,1-cdef]phenanthrene (Pr4) + H Pr5 + H ⇌ Pr4 + H Pr4 + H → 1-pyrenylmethyl (Pr3) This HACA sequence may be competitive with the methyl radical addition to the R1 radical formed by H abstraction from the CH 2 group in the five-membered ring of cyclopenta[d,e,f]phenanthrene, which provides a pathway to pyrene following two H atom losses. Relative contributions of the two mechanisms of the five- to six-membered ring transformation would strongly depend on the branching ratios of the R1 and R2 radicals produced by the H abstractions and the available concentration of C 2 H 2 vs. CH 3 and hence differ in different flames.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Composite entanglement topology and extensional rheology of symmetric ring-linear polymer blends

Extensive molecular simulations are applied to characterize the equilibrium dynamics, entanglement topology, and nonlinear extensional rheology of symmetric ring-linear polymer blends with systematically varied ring fraction ϕR. Chains with degree of entanglement Z≈14 are mixed to produce 10 well-entangled systems with ϕR varying from neat linear to neat ring melts. Z is large enough that except for very large ϕR, the rings are threaded by multiple linear chains in equilibrium. Primitive path analysis is used to visualize and quantify the structure of the composite ring-linear entanglement network. We measure the quantity of ring-linear threading and linear-linear entanglement as a function of ϕR and identify with simple arguments a ring fraction ϕR≈0.4 where the topological constraints of the composite entanglement network are maximized. These topological analyses are used to rationalize the ϕR-dependence of ring and linear chain dynamics, conformations, and rheology. Simulations of startup uniaxial elongation flows demonstrate the extensional stress overshoot observed in recent filament stretching experiments and characterize how it depends on the blend composition and entanglement topology. The overshoot is driven by an overstretching and recoil of ring polymers due to the convective unthreading of rings from linear chains.

O’Connor, Thomas C.↗
DOE OSTI2024

Model 9975 O Ring Fixture Long-Term Leak Performance (FY2024 Status Report)

Leak testing experiments to monitor the aging performance of Viton ® GLT and GLT-S O-rings used in the model 9975 shipping package have been ongoing since 2004 at Savannah River National Laboratory. Seventy tests using mock-up 9975 primary containment vessels (PCVs) with GLT O-rings were assembled and heated to temperatures ranging from 200 to 450 °F. Due to material substitution, fourteen tests with GLT-S O-rings were initiated in 2008 and heated to temperatures ranging from 200 to 400 °F. The conditioning temperatures are elevated compared to the calculated maximum O-ring temperature in a 9975 package in storage, 158 °F, to accelerate aging and enable observations of O-ring failures in a reasonable time frame. The mock-up PCV fixtures are leak tested periodically, and all GLT O-ring fixtures aging at 350 °F or above have failed to maintain a leak-tight seal. Eight GLT O-ring fixtures aging at 300 °F have failed after 2.8 to 5.7 years at temperature while the remaining fixtures at 300 °F were retired from testing following more than five years of aging without failure. Two of these retired fixtures were returned to testing and heated to 350 °F to evaluate the impact of additional heating at higher temperature for aged O-rings. Fixture #20 failed after 3 months of testing while fixture #18 remained leak tight. These O-rings demonstrated that aged and in-service O-rings can continue to be used, even at higher temperatures, after being in storage, and their leak performance are consistent with other samples at 350 °F.

42 ENGINEERING↗
DOE OSTI2022

Dual Energy Electron Storage Ring Cooler Design for Relativistic Ion Beams

Collider experiments demand small beam emittances in order to achieve high luminosity. For light particles such as electrons, there exists a natural synchrotron radiation damping resulting in low emittance beams at equilibrium. In the case of heavy particle beams such as proton or ion beams, there is no significant synchrotron radiation damping effect and some cooling mechanism is needed to get to low emittance beams. A dual energy storage ring cooler is a novel concept proposed to cool hadron beams at higher energies. The design consists of two rings: a low energy ring and a high energy ring connected by the energy recovering linac (ERL) that provides the necessary energy difference. The low energy ring has an electron cooler where the cooling interaction takes place between the electron and hadron beams whereas electron beam going through the high energy ring undergoes synchrotron radiation damping. In this document, we present a possible design of a dual energy storage ring-based electron cooler for high energy proton beam cooling suitable for the Electron Ion Collider (EIC) to be built at Brookhaven National laboratory (BNL). A special feature of a dual energy storage ring cooler design is that the electron beam energy in the low energy section must be tuned to match the hadron beam velocity in the cooling section, and the electron beam energy in the high energy section is chosen to provide an adequate synchrotron radiation damping. In addition, the ring optics design is carried out considering chromaticity correction, dynamic aperture, momentum aperture, beam lifetime, radiation damping and the intrabeam scattering effect. Finally, the cooling performance is simulated for 275 GeV proton beams at the top energy of the EIC. In such a collider it is desirable to cool the hadron beams to balance the emittance growth rates due to intra-beam scattering (IBS) to maintain a high luminosity during the collision runs. In such a situation, a dual energy storage ring based cooler could be a practical approach to be used for hadron beam cooling.

Dhital, Bhawin↗
DOE OSTI2025

Ring Pull Strain Analysis Version 1.1

This report details an analysis package, Ring Pull Strain Analysis (RPSA), that can be used to present and quantify digital image correlation (DIC) data as it relates to a gaugeless ring pull test. Gaugeless ring pull is a testing technique for mechanical testing of small annular samples, usually cut from a thin-walled tube. DIC data is often necessary for this kind of test because bending moments present on the ring cause a non-uniform strain distribution and localized measurements are necessary. In addition, the annular geometry of a ring lends itself to a polar representation, which is not present with typical DIC analysis methods. RPSA was made to calculate and plot the polar representation of strain from standard pre-processed DIC data of a gaugeless ring pull test. Further analysis can be done on ring pull including a quasi-uniaxial tensile analysis and coating analysis, which are also performed by RPSA. In addition, due to the universality of DIC plotting and ring pull test analysis, RPSA can accommodate a wide variety of tests, though it is tailored for ring pull testing. This report details how RPSA works, including the theory, assumptions, and logic behind the calculations and the structure of the program.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Simulation of the High Temperature Test Facility (HTTF) Core Using the 2D Ring Model with SAM

A two-dimensional ring model is developed with SAM to model the core of the High Temperature Test Facility (HTTF) at the system level. The ring model simplifies the complex structure of the HTTF core by converting the hexagonal rows of heaters and flow channels into layers of concentric annular rings. The ring model is first compared against a 3D-1D model where the solid structures are fully resolved in three dimensions while the fluid structures are modeled as one-dimensional flows. Comparison between the 3D-1D and the ring models shows that the latter can predict major parameters reasonably well under steady-state normal operating condition, but the heater temperatures are underpredicted. Adjustment is made to the effective thermal conductivity of the ceramic core of the ring model to improve the heater temperature predictions. Furthermore, the ring model is also used to simulate a transient Pressurized Conduction Cooldown (PCC) condition and is benchmarked with the experimental data from the HTTF Test PG-27. Good agreement is obtained between the experimental data and the predictions by the ring model.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

Dual-energy electron storage ring

A dual-energy electron storage ring is a novel concept initially proposed to cool hadron beams at high energies. The design consists of two closed rings operating at significantly different energies: the low-energy ring and the high-energy ring. These two rings are connected by an energy recovery linac (ERL) that provides the necessary energy difference. The ERL features superconducting radio-frequency (SRF) cavities that first accelerate the beam from the low energy E L to the high energy E H and then decelerate the beam from E H to E L in the next pass. The different SRF cavities in the ERL section can be adjusted based on the applications. In this paper, we present a possible layout of a dual-energy electron storage ring. The preliminary optics of the ring is designed to optimize chromaticity correction, dynamic aperture, momentum aperture, beam lifetime, radiation damping, and intrabeam scattering effects. The primary focus of this paper is on the stability conditions and beam dynamics studies associated with this storage ring. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Enhanced chloroplast FtsZ-ring constriction by the ARC6–ARC3 module in Arabidopsis

Chloroplast division, a process tightly linked to the energy demands of plants, is initiated by the formation of the stromal filamenting temperature-sensitive Z (FtsZ) ring. The Z ring is highly dynamic, and its constriction provides the essential force for chloroplast division. However, the regulatory mechanisms governing Z-ring dynamics and constriction remain poorly understood. Here, we report that the chloroplast inner envelope membrane (IEM) protein ACCUMULATION AND REPLICATION OF CHLOROPLASTS6 (ARC6) interacts with the chloroplast stromal protein ARC3, and this interaction is negatively regulated by the conserved J-like domain of ARC6. ARC3 is found both distributed throughout the stroma and localized to a ring-like structure at the chloroplast division site. We demonstrate that ARC6 recruits ARC3 to the division site to form a ring-like structure, likely through direct interaction. This ARC6–ARC3 interaction enables ARC3 to bind FtsZs. Furthermore, we show that the ARC6–ARC3 complex significantly promotes the dynamics of chloroplast Z rings reconstituted in a heterologous system. Finally, the constriction of these reconstituted Z rings is markedly enhanced by ARC6–ARC3. Our findings reveal a regulatory mechanism that governs Z-ring dynamics and constriction, shedding light on the molecular mechanisms underlying chloroplast division.

Science & Technology - Other Topics↗
DOE OSTI2023

Photon rings around warped black holes

Abstract The black hole photon ring is a prime target for upcoming space-based VLBI missions seeking to image the fine structure of astrophysical black holes. The classical Lyapunov exponents of the corresponding nearly bound null geodesics control the quasinormal ringing of a perturbed black hole as it settles back down to equilibrium, and they admit a holographic interpretation in terms of quantum Ruelle resonances of the microstate dual to the Kerr black hole. Recent work has identified a number of emergent symmetries related to the intricate self-similar structure of the photon ring. Here, we explore this web of interrelated phenomena in an exactly soluble example that arises as an approximation to the near-extremal Kerr black hole. The self-dual warped AdS 3 geometry has a photon ring as well as S L ( 2 , R ) isometries and an exactly calculable quasinormal mode (QNM) spectrum. We show explicitly that the geometric optics approximation reproduces the eikonal limit of the exact scalar QNM spectrum, as well as the approximate ‘near-ring’ wavefunctions. The S L ( 2 , R ) isometries are directly related to the emergent conformal symmetry of the photon ring in black hole images but are distinct from a recently discussed conformal symmetry of the eikonal QNM spectrum. The equivalence of the classical QNM spectrum—and thus the photon ring—to the quantum Ruelle resonances in the context of a spacetime with a putative holographic dual suggests that the photon ring of a warped black hole is indeed part of the black hole hologram.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Composite Correlated Molecular Orbital Theory Calculations of Ring Strain for Use in Predicting Polymerization Reactions

Strained ring systems play an important role in synthesis and can be characterized by the ring strain energy (RSE). The RSE of 3, 4, 5, and 6 membered saturated and unsaturated ring systems containing N, O, P, and S heteroatoms and H, F, SiMe 3 , and SO 2 Me substituents were calculated at the G3(MP2) composite correlated molecular orbital theory level using up to 5 models to predict the RSE. Generally, the RSE decreased as ring size increased with a substantial decrease from 4 to 5 membered rings. Replacement of a ring CH 2 with P or S reduced the RSE, consistent with less angle strain. The RSE for unsaturated systems were generally greater than for saturated systems due to increased angle strain. No general trends were found with respect to substituent effects. In conclusion, the RSE values suggest that 3-pyrroline and 2-pyrroline and their derivatives may be able to support ring opening metathesis polymerization and warrant further study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Orbital Angular Momentum from Self‐Assembled Concentric Nanoparticle Rings

Abstract Ring‐shaped nanostructures can focus, filter, and manipulate electromagnetic waves, but are challenging to incorporate into devices using standard nanofabrication techniques. Directed self‐assembly (DSA) of block copolymers (BCPs) on lithographically patterned templates has successfully been used to fabricate concentric rings and spirals as etching masks. However, this method is limited by BCP phase behavior and material selection. Here, a straightforward approach to generate ring‐shaped nanoparticle assemblies in thin films of supramolecular nanocomposites is demonstrated. DSA is used to guide the formation of concentric rings with radii spanning 150–1150 nm and ring widths spanning 30–60 nm. When plasmonic nanoparticles are used, ring nanodevice arrays can be fabricated in one step, and the completed devices produce high‐quality orbital angular momentum (OAM). Nanocomposite DSA simplifies and streamlines nanofabrication by producing metal structures without etching or deposition steps; it also introduces interparticle coupling as a new design axis. Detailed analysis of the nanoparticle ring assemblies confirms that the supramolecular system self‐regulates the spatial distribution of its components, and thus exhibits a degree of flexibility absent in DSA of BCPs alone, where structures are determined by polymer‐pattern incommensurability. The present studies also provide guidelines for developing self‐regulating DSA as an alternative to incommensurability‐driven methods.

Vargo, Emma↗
DOE OSTI2022

Shock wave formation from head-on collision of two subsonic vortex rings

Vortex ring collisions have attracted intense interest in both water and air studies (Baird in Proc R Soc Lond Ser Math Phys Sci 409:59–65, 1987, Poudel et al. in Phys Fluids 33:096105, 2021, Lim and Nickels in Nature 357:225, 1992, New et al. in Exp Fluids 57:109, 2016, Suzuki et al. in Geophys Res Lett 34, 2007, Yan et al. in J Fluids Eng 140:054502, 2018, New et al. in J Fluid Mech 899, 2020, Cheng et al. in Phys Fluids 31:067107, 2019, Hernández and Reyes in 29:103604, 2017, Mishra et al. in Phys Rev Fluids, 2021, Zednikova et al. in Chem Eng Technol 42:843–850, 2019, Kwon et al. in Nature 600:64–69, 2021). These toroidal structures spin around a central axis and travel in the original direction of impulse while spinning around the core until inertial forces become predominant causing the vortex flow to spontaneously decay to turbulence (Vortex Rings, https://projects.iq.harvard.edu/smrlab/vortex-rings). Previous studies have shown the collision of subsonic vortex rings resulting in reconnected vortex rings, but the production of a shock wave from the collision has not been demonstrated visibly (Lim and Nickels in Nature 357:225, 1992, Cheng et al. in Phys Fluids 31:067107, 2019). Here we present the formation of a shock wave due to the collision of explosively formed subsonic vortex rings. As the vortex rings travel at Mach 0.66 toward the collision point, they begin to trap high pressure air between them. Upon collision, high pressure air was imploded and released radially away from the axis of the collision, generating a visible shock wave traveling through and away from the colliding vortices at Mach 1.22. Our results demonstrate a pressure gradient with high pressure release creating a shock wave. We anticipate our study to be a starting point for more explosively formed vortex collisions. For example, explosives with different velocities of detonation could be tested to produce vortex rings of varying velocities.

42 ENGINEERING↗
DOE OSTI2026

S 8 ring content in liquid sulfur determined from x-ray diffraction

The S 8 ring content in liquid sulfur has been determined from the 4.47 Å peak in the x-ray pair distribution function over the temperature range −55 °C –330 °C. This peak represents the characteristic 3rd and 4th nearest atom-atom distances across an S 8 -ring. Three procedures were used to calculate the S 8 -ring fraction; scaling to crystalline β-S, a linear combination fit and a direct integration method. All methods gave similar values, indicating that approximately one third of the S 8 -rings break up upon melting into a distribution of short chains with an average length of 5 ± 2 atoms. Our results contradict established models of low temperature sulfur that indicate below the λ-transition the liquid comprises almost entirely of S8-rings. In addition, we find the S 8 -ring fraction increases to 76 ± 10% at −30 °C in the supercooled liquid, and decreases to 23% ± 3% at 330 °C in the high temperature melt. First principle molecular dynamics calculations confirm the onset of dynamic ring distortion via broad bond angle distributions, associated with the interstitial region between the first and second peaks in the pair distribution function. Our results are consistent with the presence of a propensity of short chains in the low temperature liquid, that are required for the bond switching mechanism responsible for the polymerization process to occur at the λ-transition temperature, T λ .

lambda transition↗