Search NASA⌕ Search

SEARCH · Search NASA

Results for “rotor speed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Brush seal leakage performance with gaseous working fluids at static and low rotor speed conditions

The leakage performance of a brush seal with gaseous working fluids at static and low rotor speed conditions was studied. The leakage results are included for air, helium, and carbon dioxide at several bristle/rotor interferences. Also, the effects of packing a lubricant into the bristles and also of reversing the pressure drop across the seal were studied. Results were compared to that of an annular seal at similar operating conditions. In order to generalize the results, they were correlated using corresponding state theory. The brush seal tested had a bore diameter of 3.792 cm (1.4930 in), a fence height of 0.0635 cm (0.025 in), and 1800 bristles/cm circumference (4500 bristles/in circumference). Various bristle/rotor radial interferences were achieved by using a tapered rotor. The brush seal reduced the leakage in comparison to the annular seal, up to 9.5 times. Reversing the pressure drop across the brush seal produced leakage rates approx. the same as that of the annular seal. Addition of a lubricant reduced the leakage by 2.5 times. The air and carbon dioxide data were successfully correlated using corresponding state theory. However, the helium data followed a different curve than the air and carbon dioxide data.

Carlile, Julie A.↗
NASA NTRS1985

Shock fitting applied to the prediction of high-speed rotor noise

A shock fitting method applied to the transonic small disturbance (TSD) potential equation is described. This method is then applied to a simple, two dimensional (2-D) rotating disturbance which is analogous to a shock radiating from the tip of a rotor blade in high speed hover. A comparison is made between the results of this method and the more standard shock capturing method. This comparison makes it clear that the effect of the results on the acoustic signature of the 2-D model is significant, and similar results can be expected when the method is extended to the three dimensional (3-D) case.

Rutherford, J. W.↗
NASA NTRS1989

A prediction of high-speed rotor noise

A combined computational (CFD) and integral approach solves the acoustic pressure fields of two high-speed helicopter rotors. A CFD code supplies boundary data to a non-linear type of Kirchhoff integral formulation to find the far-field pressures. Direct calculations of pressures are given by the CFD code up to the sonic cylinder where the Kirchhoff method takes over. This paper shows predictions and measurements of High-Speed Impulsive (HSI) noise in hover for two different rotor geometries. One rotor has a conventional rectangular planform, while the other rotor is highly swept and tapered. The swept rotor analysis forms the majority of this paper. Test data from both rotors are shown and compared with predictions for a range of tip Mach numbers from .85 to .95 (including delocalization). The correlation with the near-field pressures from the straight bladed experiment is excellent and good to excellent correlation is seen for the far-field pressures from both experiments.

Purcell, Timothy W.↗
NASA NTRS1987

Computational studies in low speed rotor aerodynamics

Recently, curved vortex elements have been developed for use in helicopter free wake calculations. As previously documented, these elements allow more efficient and accurate calculation of the wake-on-wake interactions than do traditional straight vortex elements. Curved elements have been applied here to the prediction of the rotor wake geometry and its associated inflow distribution in low speed forward flight. By coupling the wake model to a blade dynamic analysis, a simulation capable of predicting blade motion and hub moments in forward flight has been developed. The resulting code has been validated by successful predictions of the lateral flapping of articulated rotors in low speed level flight, and additional simulators of climb and descent have been undertaken. Successful correlation of other experimental data, including moments due to cyclic on hingeless rotors and transient thrust response in hover, has given encouraging evidence of the capabilities of this code as a tool for analysis of the low speed regime.

Quackenbush, Todd R.↗
NASA NTRS2003

Task III: Development of an Effective Computational Methodology for Body Force Representation of High-speed Rotor 37

A framework for an effective computational methodology for characterizing the stability and the impact of distortion in high-speed multi-stage compressor is being developed. The methodology consists of using a few isolated-blade row Navier-Stokes solutions for each blade row to construct a body force database. The purpose of the body force database is to replace each blade row in a multi-stage compressor by a body force distribution to produce same pressure rise and flow turning. To do this, each body force database is generated in such a way that it can respond to the changes in local flow conditions. Once the database is generated, no hrther Navier-Stokes computations are necessary. The process is repeated for every blade row in the multi-stage compressor. The body forces are then embedded as source terms in an Euler solver. The method is developed to have the capability to compute the performance in a flow that has radial as well as circumferential non-uniformity with a length scale larger than a blade pitch; thus it can potentially be used to characterize the stability of a compressor under design. It is these two latter features as well as the accompanying procedure to obtain the body force representation that distinguish the present methodology from the streamline curvature method. The overall computational procedures have been developed. A dimensional analysis was carried out to determine the local flow conditions for parameterizing the magnitudes of the local body force representation of blade rows. An Euler solver was modified to embed the body forces as source terms. The results from the dimensional analysis show that the body forces can be parameterized in terms of the two relative flow angles, the relative Mach number, and the Reynolds number. For flow in a high-speed transonic blade row, they can be parameterized in terms of the local relative Mach number alone.

Tan, Choon-Sooi↗
NASA NTRS1986

The evolution of methods for noise prediction of high speed rotors and propellers in the time domain

Linear wave equation models which have been used over the years at NASA Langley for describing noise emissions from high speed rotating blades are summarized. The noise sources are assumed to lie on a moving surface, and analysis of the situation has been based on the Ffowcs Williams-Hawkings (FW-H) equation. Although the equation accounts for two surface and one volume source, the NASA analyses have considered only the surface terms. Several variations on the FW-H model are delineated for various types of applications, noting the computational benefits of removing the frequency dependence of the calculations. Formulations are also provided for compact and noncompact sources, and features of Long's subsonic integral equation and Farassat's high speed integral equation are discussed. The selection of subsonic or high speed models is dependent on the Mach number of the blade surface where the source is located.

Farassat, F.↗
NASA NTRS1978

Foil bearings for axial and radial support of high speed rotors: Design, development, and determination of operating characteristics

Flexible surface thrust and journal foil bearings were fabricated, and their performance was demonstrated, both individually and jointly as a unified rotor support system. Experimental results are documented with graphs and oscilloscopic data of trajectories, waveforms, and scans of amplitude response. At speeds of 40,000 to 45,000 rpm and a mean clearance of the order of 15 to 20 micrometers (600 to 800 micrometers, the resilient, air lubricated, spiral groove thrust bearings support a load of 127 N (29 lb; 13 kgf), equivalent to 3.0 N/sq cm (4.5 lb/sq in 0.31 kgf sq cm). Journal bearings with polygonal sections provided stable and highly damped supports at speeds up to 50,000 rpm.

Licht, L.↗
NASA NTRS1980

Dynamic characteristics of a high-speed rotor with radial and axial foil-bearing supports

An asymmetric rotor (19N; 4.3 lb), supported radially and axially by compliant bearings is subjected to severe excitation by rotating unbalance in the 'pitching' mode at speeds to 50,000 rpm. The resilient, air-lubricated bearings provide very effective damping, so that regions of resonance and instability can be traversed with amplitudes and limit-trajectories within acceptable bounds. A novel journal bearing is introduced, in which a resilient support is furnished by the outer turn of the coiled foil-element bent to form an open polygon. The experimental apparatus and procedure are described, and the response of the rotor and flexible support system are documented by oscilloscope records of motion.

Licht, L.↗
NASA NTRS1983

An experimental investigation and numerical prediction of thermomechanical phenomena in high speed rotor tip rubbing

A thermomechanical study of the intermittent rubbing of a rotor blade tip and a casing seal is carried out taking into account the existence of thermal contact resistance. The effect of the thermal properties of a plasma sprayed coating on the blade tip is studied. The influence of a variable heat generation and variable thermal contact resistance at the blade tip as it passes along the path of rubbing is also discussed.

Emery, A. F.↗
NASA NTRS1987

Prediction of high-speed rotor noise with a Kirchhoff formula

A new methodology has been developed to predict the impulsive noise generated by a transonic rotor blade. The formulation uses a full-potential finite-difference method to obtain the pressure field close to the blade. A Kirchhoff integral formulation is then used to extend these finite-difference results into the far-field. This Kirchhoff formula is written in a blade-fixed coordinate system. It requires initial data across a plane at the sonic radius. This data is provided by the finite-difference solution. Acoustic pressure predictions show excellent agreement with hover experimental data for two hover cases of 0.88 and 0.90 tip Mach number, the latter of which has delocalized transonic flow. These results represent the first successful prediction technique for peak pressure amplitudes using a computational code.

Purcell, Timothy W.↗
NASA NTRS1988

Development of an advanced high-speed rotor - Final results from the Advanced Flight Research Rotor program

The final results of the Advanced Flight Research Rotor (AFRR) study, a NASA sponsored research program, are summarized. First, the results of the initial phase of the AFRR program, consisting of the definition of a conventional rotor with planform and prescribed twist distributions, are briefly reviewed. The mechanism of the calculated performance benefit is then explained, and a detailed analysis of the prescribed twist distribution is presented. Recommendations are made on the practical means of approximating the prescribed twist on the actual rotor.

Jenks, Mark↗
NASA NTRS1997

The Second Generation High Speed Rotor Head Mounted Instrumentation System

NASA Ames Research Center has been investigating the air pressure flow of a rotor blade on a UH-60 Black Hawk helicopter in-flight. This paper will address the changes and improvements due to additional restrictions and requirements for the instrumentation system. The second generation instrumentation system was substantially larger and this allowed greatly improved accessibility to the components for ease of maintenance as well as improved gain and offset adjustment capabilities and better filtering.

Lewis, John↗
NASA NTRS1997

High Speed Rotor Head Mounted Instrumentation System

NASA Ames Research Center has been investigating the air flow of a rotor blade on a UH-60 Blackhawk helicopter in-flight. This paper will address the hardware problems and solutions used to design and fabricate an instrumentation system on top of a UH-60 main rotor head. The instrumentation system consisted of 10 data systems operating in parallel and collected data from 370 sensors that are mounted in four rotor blades and on the rotating rotor head. The data was recorded on board the aircraft and simultaneously down linked to the ground station at 7.5 MHz.

Hee, Leonard↗