Search NASASearch

SEARCH · Search NASA

Results for “shadow bands”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

The X-ray shadow of the high-latitude molecular cloud MBM 12

ROSAT XRT/PSPC observations show a deep shadow cast by the high-latitude molecular cloud MBM 12 in the 3/4 keV diffuse background. Modeling of the shadow implies that less than 20 percent of the typical high-latitude 3/4 keV diffuse background intensity is emitted in front of the cloud (D = 60-70 pc). A weaker shadow consistent with the lower optical depth at higher energies was observed in the 1.5 keV band. Since little shadowing was seen in the 1/4 keV band, this observation places strong constraints on the amount of 0.5-2 keV emission that is intermixed with the source of the observed 1/4 keV flux.

Snowden, S. L.

Landsat applied to landslide mapping

A variety of features characteristic of rotational landslides may be identified on Landsat imagery. These include tonal mottling, tonal banding, major and secondary scarps, and ponds. Pseudostereoscopic viewing of 9 by 9 in. transparencies was useful for the detailed identification of landslides, whereas 1:250,000 prints enlarged from 70 mm negatives were most suitable for regional analysis. Band 7 is the most useful band for landslide recognition, due to accentuation of ponds and shadows. Examination of both bands 7 and 5, including vegetation information, was found to be most suitable. Although, given optimum terrain conditions, some landslides in Colorado may be recognized, many smaller landslides are not identifiable. Consequently, Landsat is not recommended for detailed regional mapping, or for use in areas similar to Colorado, where alternative (aircraft) imagery is available. However, Landsat may prove useful for preliminary landslide mapping in relatively unknown areas.

Sauchyn, D. J.

Mobile satellite system fade statistics for shadowing and multipath from roadside trees at UHF and L-band

Field tests related to planned mobile satellite systems were performed, and results that add to the existing database of propagation measurements at L-band (1.5 GHz) are described. They are considered particularly useful in that propagation effects were studied systematically, with repeated and controlled runs pertaining to different path elevation angles, road types, and path geometries defining shadowing and line-of-sight modes. In addition, simultaneous L-band and UHF measurements were performed for the purpose of establishing scaling factors applicable to previous UHF (870 MHz) results. The control of the experimental parameters was made possible by using a helicopter as the source platform and a mobile van to house the receiver.

Goldhirsh, Julius

Mobile Propagation Results from Using the ACTS Mobile Terminal

NASA's Advanced Communications Technology Satellite (ACTS) provides an ideal spaced-based platform for analyzing the Ka-band mobile satellite channel. This paper reports on the results of the Ka-band mobile propagation analysis campaign using the ACTS Mobile Terminal (AMT) developed by the Jet Propulsion Laboratory (JPL). The objectives of the mobile propagation experiments were to measure and analyze the fading characteristics of the Ka-band channel. The analysis involved examining pilot tone tests in three environments: lightly shadowed suburban, moderately shadowed suburban, and heavily shadowed suburban. The results indicate that Ka-band pilot tones experience significant multipath and fading effects. It may be possible to design link margins to provide reliable service for the lightly shadowed suburban environment at Ka-band. However, for areas with moderate and heavy shadowing, the link margin required to realize reliable communications with 99% availability is excessive (26 dB for moderate shadowing, and greater then 30 dB for heavy shadowing). An alternate approach would be to use shadowing/fading countermeasures (e.g., interleaved error control coding and antenna diversity). Such mitigation techniques, necessary for reliable Ka-band mobile communication within a suburban environment, are currently being considered within the NASA program.

Pinck, Deborah

Preliminary geologic evaluation of L-band radar imagery: Arkansas test site

The relatively small angles of incidence (steep depression angles) of the L-band system provide minimal shadowing on terrain back-slopes and considerable foreshortening on terrain fore-slopes which sacrifice much of the topographic enhancement afforded by a more oblique angle of illumination. In addition, the dynamic range of the return from vegetated surfaces is substantially less for the L-band system, and many surface features defined primarily by subtle changes in vegetation are lost. In areas having terrain conditions similar to those of northern Arkansas, and where LANDSAT and shorter wavelength aircraft radar data are available, the value of the JPL L-band imagery as either a complimentary or supplementary geologic data source is not obvious.

Macdonald, H.

Mars Reconnaissance Orbiter Ka-band (32 GHz) Demonstration: Cruise Phase Operations

The X-band (8.41 GHz) frequency currently used for deep space telecommunications is too narrow (50 MHz) to support future high rate missions. Because of this NASA has decided to transition to Ka-band (32 GHz) frequencies. As weather effects cause much larger fluctuations on Ka-band than on X-band, the traditional method of using a few dBs of margin to cover these fluctuations is wasteful of power for Ka-band; therefore, a different operations concept is needed for Ka-band links. As part of the development of the operations concept for Ka-band, NASA has implemented a fully functioning Ka-band communications suite on its Mars Reconnaissance Orbiter (MRO). This suite will be used during the primary science phase to develop and refine the Ka-band operations concept for deep space missions. In order to test the functional readiness of the spacecraft and the Deep Space Network's (DSN) readiness to support the demonstration activities a series of passes over DSN 34-m Beam Waveguide (BWG) antennas were scheduled during the cruise phase of the mission. MRO was launched on August 12, 2005 from Kennedy Space Center, Cape Canaveral, Florida, USA and went into Mars Orbit on March 10, 2006. A total of ten telemetry demonstration and one high gain antenna (HGA) calibration passes were allocated to the Ka-band demonstration. Furthermore, a number of "shadow" passes were also scheduled where, during a regular MRO track over a Ka-band capable antenna, Ka-band was identically configured as the X-band and tracked by the station. In addition, nine Ka-band delta differential one way ranging ((delta)DOR) passes were scheduled. During these passes, the spacecraft and the ground system were put through their respective paces. Among the highlights of these was setting a single day record for data return from a deep space spacecraft (133 Gbits) achieved during one 10-hour pass; achieving the highest data rate ever from a planetary mission (6 Mbps) and successfully demonstrating Ka-band DDOR. In addition, DSN performed well. However, there are concerns with the active pointing of the Ka-band antennas as well as delivery of the monitor data from the stations. The spacecraft also presented challenges not normally associated with planetary missions mostly because of its very high equivalent isotropic radiated power (EIRP). This caused problems in accurately evaluating the in-flight EIRP of the spacecraft which led to difficulties evaluating the quality of the HGA calibration data. These led to the development of additional measurement techniques that could be used for future high-power deep space missions.

Mars Reconnaissance Orbiter (MRO)

RF optics study for DSS-43 ultracone implementation

The Ultracone feed system will be implemented on DSS 43 to support the S-band (2.3 GHz) Galileo contingency mission. The feed system will be installed in the host country's cone, which is normally used for radio astronomy, VLBI, and holography. The design must retain existing radio-astronomy capabilities, which could be impaired by shadowing from the large S-band feed horn. Computer calculations were completed to estimate system performance and shadowing effects for various configurations of the host country's cone feed systems. Also, the DSS-43 system performance using higher gain S-band horns was analyzed. A new S-band horn design with improved return loss and cross-polarization characteristics is presented.

Lee, P.

High-efficiency silicon solar-cell design and practical barriers

A numerical evaluation technique is used to study the impact of practical barriers, such as heavy doping effects (Auger recombination, band gap narrowing), surface recombination, shadowing losses and minority-carrier lifetime (Tau), on a high efficiency silicon solar cell performance. Considering a high Tau of 1 ms, efficiency of a silicon solar cell of the hypothetical case is estimated to be around 29%. This is comparable with (detailed balance limit) maximum efficiency of a p-n junction solar cell of 30%. Value of Tau is varied from 1 second to 20 micro. Heavy doping effects, and realizable values of surface recombination velocities and shadowing, are then considered in succession and their influence on cell efficiency is evaluated and quantified. These practical barriers cause the cell efficiency to reduce from the maximum value of 29% to the experimentally achieved value of about 19%. Improvement in open circuit voltage V sub oc is required to achieve cell efficiency greater than 20%. Increased value of Tau reduces reverse saturation current and, hence, improves V sub oc. Control of surface recombination losses becomes critical at higher V sub oc. Substantial improvement in Tau and considerable reduction in surface recombination velocities is essential to achieve cell efficiencies greater than 20%.

Mokashi, A.

Near-surface ice on Mercury and the Moon: A topographic thermal model

A thermal model that can be easily adapted to craters of arbitrary shape is developed and applied to high-latitude impact craters on Mercury and the Moon, Chao Meng Fu crater at -87.5 deg L on Mercury, an unnamed bowl-shaped crater at 86.7 deg L on Mercury, and Peary crater at 88.6 deg L on the Moon. For an assumed input topography and grid of surface elements, the model computes for each element the irradiation from direct insolation and reflected and emitted radiation from other elements, taking into account shadowing by walls of the crater, partial obscuration of the solar disk near the poles and the diurnal, orbital, and seasonal cycles. Temperatures are computed over the surface grid as functions of depth and time from the surface to a specified depth and over the pertinent astronomical cycles, including the effects of direct and indirect surface irradiation, infrared radiation, heat conduction, and interior heating. Vapor fluxes and ice recession times are computed as functions of ice depth over the surface grid. Temperatures profiles, vapor fluxes, and ice recession times were computed for flat surfaces not associated with craters near the poles of Mercury and the Moon. It was found that water ice could have existed throughout geologic time within the maximum radar detection depth of recent observation of Mercury (J. K. Harmon and M. A. Slade, 1992, Science 258, 640-643) poleward of approximately 87 - 88 deg L on Mercury and poleward of approximately 73 deg L on the Moon. For Chao Meng Fu crater it was found that approximately 40% of the crater floor is permanently shadowed from direct solar insolation, while the remainder of the crater floor is periodically illuminated by a partially obscured Sun. Temperatures at the upper levels of the south wall can slightly exceed 550 K. Surface temperatures in the permanently shadowed region of the crater floor are under approximately 130 K, which could have allowed water ice to exist throughout geologic time within the radar detection depth of recent observation of Mercury. For small bowl-shaped crater on Mercury, it was found that most of the crater is permanently shadowed from direct solar radiation, except for a narrow semicircular band bordering the north rim. However, temperatures in the permanently shadowed region periodically reach a maximum near approximately 315 K due to efficient heating of the small crater by thermal emission and reflection from the small sunlit region, which periodically reaches temperatures exceeding 630 K. Water ice could not have existed throughout geologic time anywhere in this crater within the radar detection depth. For Peary crater on the Moon, the entire crater floor is permanently shadowed from direct solar insolation with maximum temperature under 120 K. The upper level of the north wall periodically reaches a maximum temperature near 310 K. The low temperatures on the crater floor would have allowed water ice to exist near the surface throughout geologic time, provided that the Moon's obliquity was always as low as it is at present.

Salvail, James R.

ROSAT detection of an X-ray shadow in the 1/4-keV diffuse background in the Draco nebula

The detection by the Roentgen satellite (ROSAT) X-ray telescope of a shadow in the 1/4-keV (C-band, 0.1 to 0.284 keV) cosmic diffuse background is reported. The location and morphology of the local minimum in X-rays are in clear agreement with a discrete H I cloud. The shadow is very deep with a minimum level at 50 percent of the surrounding emission; therefore, a minimum of 50 percent of the observed off-cloud flux must originate on the far side of the cloud. The analysis of H I velocity components links the cloud with the Draco nebula (distance of about 600 parsecs); it then follows that there is significant 1/4-keV X-ray emission at large distance (more than 400 parsecs) from the galactic plane along this line of sight. The extent of the distant emission region is uncertain, and if it indicates the existence of a hot galactic corona, it must be patchy in nature.

Snowden, S. L.

Reflectance of vegetation, soil, and water

The author has identified the following significant results. The Kubelka-Munk model, a regression model, and a combination of these models were used to extract plant, soil, and shadow reflectance components of vegetated surfaces. The combination model was superior to the others; it explained 86% of the variation in band 5 reflectance of corn and sorghum, and 90% of the variation in band 6 reflectance of cotton. A fractional shadow term substantially increased the proportion of the digital count sum of squares explained when plant parameters alone explained 85% or less of the variation. Overall recognition of 94 agricultural fields using simultaneously acquired aircraft and spacecraft MSS data was 61.8 and 62.8%, respectively; recognition of vegetable fields larger than 10 acres and taller than 25 cm, rose to 88.9 and 100% for aircraft and spacecraft, respectively. Agriculture and rangeland, were well discriminated for the entire county but level 2 categories of vegetables, citrus, and idle cropland, except for citrus, were not.

Wiegand, C. L.

Study to develop improved spacecraft snow survey methods using Skylab/EREP data

The author has identified the following significant results. Of the four black and white S190A camera stations, snowcover is best defined in the two visible spectral bands, due in part to their better resolution. The overall extent of the snow can be mapped more precisely, and the snow within shadow areas is better defined in the visible bands. Of the two S190A color products, the aerial color photography is the better. Because of the contrast in color between snow and snow-free terrain and the better resolution, this product is concluded to be the best overall of the six camera stations for detecting and mapping snow. Overlapping frames permit stereo viewing, which aids in distinguishing clouds from the underlying snow. Because of the greater spatial resolution of the S190B earth terrain camera, areal snow extent can be mapped in greater detail than from the S190A photographs. The snow line elevation measured from the S190A and S190B photographs is reasonable compared to the meager ground truth data available.

Barnes, J. C.

ASCA Observation of an "X-Ray Shadow" in the Galactic Plane

The diffuse X-ray background (DXB) emission near the Galactic plane (l,b about 25.6 deg., 0.78 deg.) has been observed with ASC.4. The observed re-ion is toward a Galactic molecular'cloud which was recently reported to cast a deep X-ray shadow in the 0.5 - 2.0 keV band DXB. The selection of this particular region is intended to provide a constraint on the spatial distribution of the DXB emission along the line of sight: i.e., the molecular cloud is optically thick at < 2 keV and so the bulk of the observed soft X-rays must originate in the foreground of the cloud, which is at about 3 kpc from the Sun. In the 0.8 - 9.0 keV band, atomic emission lines have been detected, and the observed spectrum is primarily from thermal plasmas. Although the detailed nature of the spectrum is complicated, the observed DXB emission appears to originate from the multiple components of hot plasmas including a thermal plasma of T about 10(exp 7) K, which prevails within about 3 kpc from the Sun.

Park, Sangwook

ASCA Observation of an "X-Ray Shadow" in the Galactic Plane

The diffuse X-ray background (DXB) emission near the Galactic plane (l,b approximately 25.6 degrees, 0.78 degrees) has been observed with ASCA (Advanced Satellite for Cosmology and Astrophysics). The observed region is toward a Galactic molecular cloud which was recently reported to cast a deep X-ray shadow in the 0.5 - 2.0 keV band DXB. The selection of this particular region is intended to provide a constraint on the spatial distribution of the DXB emission along the line of sight: i.e., the molecular cloud is optically thick at <2 keV and so the bulk of the observed soft X-rays must originate in the foreground of the cloud, which is at approximately 3 kpc from the Sun. In the 0.8 - 9.0 keV band, the observed spectrum is primarily from multiple components of thermal plasmas. We here report a detection of soft X-ray (0.5 - 2 keV) emission from an approximately 10(exp 7) K thermal plasma. Comparisons with the ROSAT (Roentgen Satellite) data suggest that this soft X-ray emission is absorbed by N(sub H) = 1 - 3 x 10(exp 21) cm(exp -2), which implies a path-length through the soft X-ray emitting regions of approximately less than 1 kpc from the Sun.

Park, Sangwook

The dynamical oscillation and propulsion of magnetic fields in the convective zone of a star. II - Thermal shadows. III - Accumulation of heat and the onset of the Rayleigh-Taylor instability

The dynamics of thermal shadows which develop in the convective zone of a star around an insulating obstacle such as a horizontal band in intense magnetic field are studied. The depth of the shadow on the cool side of the obstacle is found to depend largely on the width of the obstacle multiplied by the temperature gradient. Thermal shadows pressing fields up to 10,000 G downward against the bottom of the convective zone are produced by the broad bands of the azimuthal field in the sun's convective zone. In the third part, the time-dependent accumulation of heat beneath a thermal barrier simulating such a band in the lower convective zone of the sun is considered. The resulting Rayleigh-Taylor instability is shown to cause tongues of heated gas to penetrate upward through the field, providing the emerging magnetic fields that give rise to the activity of the sun.

Parker, E. N.

Measurement and modeling of land mobile satellite propagation at UHF and L-band

A propagation experiment is described in which a stratospheric balloon served as a transmitter platform at 870 and 1502 MHz in simulation of a land mobile satellite. A vehicle followed the drifting balloon along roads of western Texas and New Mexico, collecting at L-band amplitude and phase, and at UHF amplitude information only for elevation angles between 25 and 45 deg. The data obtained have been analyzed and are presented along with results from modeling of multipath scattering and roadside tree attenuation. The signal, with variations caused by multipath propagation and tree shadowing, was reduced by 3 dB at L-band and 2 dB at UHF for one percent of all locations. A median ratio of 3.9 was found between peak-to-peak phase (degrees) and power (dB) fluctuations. The ratio between L-band and UHF dB attenuation averages varied from 1.3 to 1.0 at fade levels from 6 to 23 dB. Optical sky brightness was measured and used to predict fade distribution with great accuracy. A single-scatterer multipath model is introduced. It is used to duplicate some of the measured data and to show the dependence of power variations on satellite elevation angle. Using Fresnel diffraction theory, the attenuation caused by a model tree was calculated to be near 10 dB and the maximum fade was found to increase by the logarithm of the number of branches.

Vogel, Wolfhard J.

Successful Starshade Petal Deployment Tolerance Verification in Support of NASA's Technology Development for Exoplanet Missions

A Starshade is a sunflower-shaped satellite with a large inner disk structure surrounded by petals that flies in formation with a space-borne telescope, creating a deep shadow around the telescope over a broad spectral band to permit nearby exoplanets to be viewed. Removing extraneous starlight before it enters the observatory optics greatly loosens the tolerances on the telescope and instrument that comprise the optical system, but the nature of the Starshade dictates a large deployable structure capable of deploying to a very precise shape. These shape requirements break down into key mechanical requirements, which include the rigid-body position and orientation of each of the petals that ring the periphery of the Starshade. To verify our capability to meet these requirements, we modified an existing flight-like Astromesh reflector, provided by Northrup Grumman, as the base ring to which the petals attach. The integrated system, including 4 of the 30 flight-like subscale petals, truss, connecting spokes and central hub, was deployed tens of times in a flight-like manner using a gravity compensation system. After each deployment, discrete points in prescribed locations covering the petals and truss were measured using a highly-accurate laser tracker system. These measurements were then compared against the mechanical requirements, and the as-measured data shows deployment accuracy well within our milestone requirements and resulting in a contrast ratio consistent with exoplanet detection and characterization.

External occulters

Soybean canopy reflectance as a function of view and illumination geometry

Reflectances were calculated from measurements at four wavelength bands through eight view azimuth and seven view zenith directions, for various solar zenith and azimuth angles over portions of three days, in an experimental characterization of a soybean field by means of its reflectances and physical and agronomic attributes. Results indicate that the distribution of reflectance from a soybean field is a function of the solar illumination and viewing geometry, wavelength, and row direction, as well as the state of canopy development. Shadows between rows were found to affect visible wavelength band reflectance to a greater extent than near-IR reflectance. A model describing reflectance variation as a function of projected solar and viewing angles is proposed, which approximates the visible wavelength band reflectance variations of a canopy with a well-defined row structure.

Ranson, K. J.