Search NASA⌕ Search

SEARCH · Search NASA

Results for “shock detector”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Post-shock temperatures in minerals

Post-shock temperatures were measured in a wide variety of materials, including those of geophysical interest such as silicates by using an infrared detector to determine the brightness temperature of samples shocked to pressures in the range 5 to approximately 30 GPa. Measurements were made in the 4.5 to 5.75 micron and in the 7 to 14 micron wavelength ranges. Reproducible results, withe the temperatures in the two wavelength bands generally in excellent agreement, were obtained for aluminum-2024 (10.5 to 33 GPa; 125 to 260 C), stainless steel-304 (11.5 to 50 GPa; 80 to 350 C), crystalline quartz (5.0 to 21.5 GPa; 80 to 250 C) forsterite (7.5 to 28.0 GPa; approximately 30 to 160 C) and Bamble bronzite (6.0 to 26.0 GPa; approximately 30 to 225 C). Results are generally much higher at low pressures than the values calculated assuming a hydrodynamic rheology and isentropic release parallel to the Hugoniot but tend towards them at higher pressures.

Raikes, S. A.↗
NASA NTRS1979

Post-shock temperatures in minerals

An experimental technique was developed for measuring post-shock temperatures in a wide variety of materials, including those of geophysical interest such as silicates. The technique uses an infrared radiation detector to determine the brightness temperature of samples shocked to pressures in the range 5 to approximately 30 GPa; in these experiments measurements were made in two wavelength ranges (4.5 to 5.75 microns and 7 to 14 microns). Reproducible results, with the temperatures in the two wavelength bands generally in excellent agreement, were obtained for aluminum-2024 (10.5 to 33 GPa, 125 to 260 C), stainless steel-304 (11.5 to 50 GPa, 80 to 350 C), crystalline quartz (5.0 to 21.5 GPa, 80 to 250 C), forsterite (7.5 to 28.0 GPa, approximately 30 to 160 C) and Bamble bronzite (6.0 to 26.0 GPa, approximately 30 to 225 C). It is concluded that release adiabat data should be used, wherever available, for calculations of residual temperature, and that adequate descriptions of the shock and release processes in minerals are more complex than generally assumed.

Raikes, S. A.↗
NASA NTRS1971

Phenomena after meteoroid penetration of a bumper plate

The analysis of hypervelocity impact of particles on a detector in space, with flow and shock penetration through fluid, plastic, and elastic zones was studied. The original paper and computer program on this topic is presented. Improvements in the program for the study of the formation of a cone of debris are discussed. The truncated apex of the cone is at the hole formed by the penetration of an initially spherical rock through a thin plate. A solution for the penetration of the thin plate was sought.

Todd, F. C.↗
NASA NTRS2023

Relativistic Electron Beams Accelerated By an Interplanetary Shock

Context: Collisionless shock waves have long been considered to be among the most prolific particle accelerators in the universe. Shocks alter the plasma they propagate through, and often exhibit complex evolution across multiple scales. Interplanetary (IP) traveling shocks have been recorded in situ for over half a century and act as a natural laboratory for experimentally verifying various aspects of large-scale collisionless shocks. A fundamentally interesting problem in both heliophysics and astrophysics is the acceleration of electrons to relativistic energies (> 300 keV) by traveling shocks. Aims: The reason for an incomplete understanding of electron acceleration at IP shocks is due to scale-related challenges and a lack of instrumental capabilities. This Letter presents the first observations of field-aligned beams of relativistic electrons upstream of an IP shock, observed thanks to the instrumental capabilities of Solar Orbiter. This study presents the characteristics of the electron beams close to the source and contributes to the understanding of their acceleration mechanism. Methods: On 25 July 2022, Solar Orbiter encountered an IP shock at 0.98 AU. The shock was associated with an energetic storm particle event, which also featured upstream field-aligned relativistic electron beams observed 14 min prior to the actual shock crossing. The distance of the beam’s origin was investigated using a velocity dispersion analysis (VDA). Peak-intensity energy spectra were analyzed and compared with those obtained from a semi-analytical fast-Fermi acceleration model. Results: By leveraging Solar Orbiter’s high temporal resolution Energetic Particle Detector (EPD), we successfully showcase an IP shock’s ability to accelerate relativistic electron beams. Our proposed acceleration mechanism offers an explanation for the observed electron beam and its characteristics, while we also explore the potential contributions of more complex mechanisms.

acceleration of particles↗
NASA NTRS1972

Distributions of electron plasma oscillations upstream from the earth's bow shock.

Evaluation of data from the 14.5- and 30-kHz plasma-wave detector channels aboard Ogo 5 for the period Dec. 2, 1968, to Apr. 8, 1969, demonstrating the relatively isotropic occurrence of electron plasma oscillations upstream from the bow shock. These plasma oscillations were shown previously to correlate with streams of electrons having energy greater than 700 eV. The present study implies the presence of such streams, most probably electrons reflected by the bow shock, irrespective of spacecraft longitude in the upstream solar wind.

Fredricks, R. W.↗
NASA NTRS1976

Structure of a quasi-parallel, quasi-laminar bow shock

A thick, quasi-parallel bow shock structure was observed with field and particle detectors of both HEOS 1 and OGO 5. The typical magnetic pulsation structure was at least 1 to 2 earth radii thick radially and was accompanied by irregular but distinct plasma distributions characteristic of neither the solar wind nor the magnetosheath. Waves constituting the large pulsations were polarized principally in the plane of the nominal shock, therefore also in the plane perpendicular to the average interplanetary field. A separate interpulsation regime detected between bursts of large amplitude oscillations was similar to the upstream wave region magnetically, but was characterized by disturbed plasma flux and enhanced noise around the ion plasma frequency. The shock structure appeared to be largely of an oblique, whistler type, probably complicated by counterstreaming high energy protons. Evidence for firehose instability-based structure was weak at best and probably negative.

Greenstadt, E. W.↗
NASA NTRS1993

The application of laser induced predissociation fluorescence to the measurement of vibrational temperatures in a shock layer flow

Single shot spatially and spectrally resolved laser induced predissociation fluorescence measurements in a shock layer around a cylinder in a pulsed supersonic free stream are presented. Fluorescence signals were produced using the tuned output of an argon fluoride excimer laser to excite a mixture of rovibrational transitions in molecular oxygen. The signals produced along a line inside the shock layer were focussed onto a two dimensional detector coupled to a spectrometer, thus allowing spectral and spatial resolution of the fluorescence. In this way, it was possible to detect two fluorescence signals from two different transitions simultaneously, allowing the determination of vibrational temperatures without the need for calibration. However, to minimize problems associated with low signal to noise ratios, background subtraction and spatial averaging was required. The experimental measurements are compared with theoretical inviscid shock layer calculations for nonequilibrium air. A description of the strategies employed in these calculations is also provided.

Sutton, D. J.↗
NASA NTRS1993

The backscattered Lyman-alpha glow emission as a signature of the termination shock

The location of the termination shock is a problem of great interest in astrophysics and the current availability of deep space probes with UV detectors has made it possible in principle to remotely sense the termination shock. The method depends upon a measurement of the neutral hydrogen distribution which results from the presence of the heliospheric plasma structure. The charge exchange interaction between the inflowing neutral hydrogen and the plasma structure leads to an observable modification of the inflowing hydrogen distribution. Hence, both the radial dependence of the backscattered Lyman-alpha glow and the absolute difference in the upstream and downstream glow brightness are modified. Recent Voyager 1 and 2 and Pioneer 10 spacecraft data are consistent with the presence of a termination shock. The observational evidence and theoretical models from which a termination shock is inferred will be presented.

Gangopadhyay, P.↗
NASA NTRS1978

Regional variations in upper mantle compressional velocities beneath southern California 1. Post-shock temperatures: Their experimental determination, calculation, and implications, 2.

The compressional velocity within the upper mantle beneath Southern California is investigated through observations of the dependence of teleseismic P-delays at all stations of the array on the distance and azimuth to the event. The variation of residuals with azimuth was found to be as large as 1.3 sec at a single station; the delays were stable as a function of time, and no evidence was found for temporal velocity variations related to seismic activity in the area. These delays were used in the construction of models for the upper mantle P-velocity structure to depths of 150 km, both by ray tracing and inversion techniques. The models exhibit considerable lateral heterogeneity including a region of low velocity beneath the Imperial Valley, and regions of increased velocity beneath the Sierra Nevada and much of the Transverse Ranges. The development is described of a technique for the experimental determination of post-shock temperatures, and its application to several metals and silicates shocked to pressures in the range 5 to 30 GPa. The technique utilizes an infra-red radiation detector to determine the brightness temperature of the free surface of the sample after the shock wave has passed through it.

Raikes, S. A.↗
NASA NTRS1979

Post-shock temperatures in minerals

An experimental technique for the measurement of post-shock temperatures in minerals is presented, and silicate post-shock temperature measurements are compared with theoretical calculations. The technique involves the use of infrared detectors to determine the brightness temperatures at 4.5 to 5.75 microns and 7 to 14 microns of samples shocked to between 5 and 30 GPa. Results obtained for aluminum 2024 and stainless steel 304, as well as for Bamble bronzite and synthetic crystal forsterite are found at low pressures to be considerably in excess of the temperatures predicted assuming a hydrodynamic rheology and isentropic release parallel to the Hugoniot. The results are shown to be in better agreement, however, with values calculated assuming elastoplastic behavior, and the post-shock temperatures of crystalline quartz are found to be in good agreement with those calculated by Mashimo et al. (1979) from release adiabat data.

Raikes, S. A.↗
NASA NTRS1981

Non-E x B ordered ion beams upstream of the earth's bow shock

The unexpected appearance of spin modulations in the fixed voltage electrostatic analyzer detectors on ISEE 1 and 2 has made it possible to study the plasma properties of the upstream ions in high time resolution. Using an isotropic flowing Maxwellian distribution to model the count rate modulations, estimates have been obtained of the local plasma temperature and three-dimensional flow velocity of the observed upstream ion population. It is found that in almost all of the observations of upstream particles there exist beam-like ions with temperatures in the range 5-80 eV. Their flow velocities cannot be ordered by E x B. This last point separates these observations from the previously reported reflected and diffuse populations of upstream ions. Mechanisms that can gyrophase bunch the ions reflected at the bow shock are discussed as a method of explaining the data.

Gurgiolo, C.↗
NASA NTRS1972

Suprathermal ion detector results from Apollo missions.

This paper reviews briefly the knowledge of the ion environment of the moon as obtained from the Apollo Lunar Surface Experiments Package, Suprathermal Ion Detector Experiment. Topics to be discussed include: an interplanetary shock as seen from the lunar surface; bow shock and magnetosheath ions; magnetotail plasma seen during a magnetic disturbance; suprathermal ions seen during passage of the sunset and sunrise terminators; and ions associated with neutral gas clouds in the vicinity of the moon, and in particular the low energy mono-energetic spectrum of these ions. It is believed that these low energy spectra and some terminator ions can be explained by ion acceleration by the interplanetary electric field. This paper serves as catalog to references to these and other related phenomena.

Freeman, J. W., Jr.↗