Search NASA⌕ Search

SEARCH · Search NASA

Results for “smoothers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Natural laminar flow hits smoother air

Natural laminar flow (NLF) may be attained in aircraft with lower cost, weight, and maintenance penalties than active flow laminarization by means of a slot suction system. A high performance general aviation jet aircraft possessing a moderate degree of NLF over wing, fuselage, empennage and engine nacelles will accrue a 24 percent reduction in total aircraft drag in the cruise regime. NASA-Langley has conducted NLF research centered on the use of novel airfoil profiles as well as composite and milled aluminum alloy construction methods which minimize three-dimensional aerodynamic surface roughness and waviness. It is noted that higher flight altitudes intrinsically reduce unit Reynolds numbers, thereby minimizing turbulence for a given cruise speed.

Holmes, B. J.↗
NASA NTRS1986

Smoother Scribing of Silicon Wafers

Proposed new tool used to scribe silicon wafers into chips more smoothly than before. New scriber produces surface that appears ductile. Scribed groove cuts have relatively smooth walls. Scriber consists of diamond pyramid point on rigid shaft. Ethanol flows through shaft and around point, like ink in ballpoint pen. Ethanol has significantly different effect for scribing silicon than water, used in conventional diamond scribers.

Danyluk, S.↗
NASA NTRS1991

Smoother Turbine Blades Resist Thermal Shock Better

Surface treatment increases resistance of turbine blades to low-cycle fatigue. Smoothing removes small flaws where cracks start. Intended for blades in turbines subject to thermal shock of rapid starting. No recrystallization occurs at rocket-turbine operating temperatures.

Czerniak, Paul↗
NASA NTRS1992

Smoother Conversion From Helicopter To Airplane

Proposed high-speed rotorcraft converts between rotating-wing flight and fixed-wing flight without high vibration. Functions both while hovering and moving at transonic or low supersonic speeds. Aircraft takes off and hovers like ordinary helicopter. After accelerating to sufficient forward speed for conversion, rotor blades retracted into large, rotating hub fairing. Rotation then stopped. Two blades extended to serve as wings, and aircraft accelerates to its cruising speed.

Stroub, Robert H.↗
NASA NTRS1993

The Arctic Ocean ice balance - A Kalman smoother estimate

The methodology of Kalman filtering and smoothing is used to integrate a 7-year time series of buoy-derived ice motion fields and satellite passive microwave observations. The result is a record of the concentrations of open water, first-year ice, and multiyear ice that we believe is better than the estimates based on the microwave data alone. The Kalman procedure interprets the evolution of the ice cover in terms of advection, melt, growth, ridging, and aging of first-year into multiyear ice. Generally, the regions along the coasts of Alaska and Siberia and the area just north of Fram Strait are sources of first-year ice, with the rest of the Arctic Ocean acting as a sink for first-year ice via ridging and aging. All the Arctic Ocean except for the Beaufort and Chukchi seas is a source of multiyear ice, with the Chukchi being the only internal multiyear ice sink. Export through Fram Strait is a major ice sink, but we find only about two-thirds the export and greater interannual variation than found in previous studies. There is no discernible trend in the area of multiyear ice in the Arctic Ocean during the 7 years.

Thomas, D. R.↗
NASA NTRS1996

Smoothers for Optimization Problems

We present a multigrid one-shot algorithm, and a smoothing analysis, for the numerical solution of optimal control problems which are governed by an elliptic PDE. The analysis provides a simple tool to determine a smoothing minimization process which is essential for multigrid application. Numerical results include optimal control of boundary data using different discretization schemes and an optimal shape design problem in 2D with Dirichlet boundary conditions.

Arian, Eyal↗
NASA NTRS2001

New Technology Sparks Smoother Engines and Cleaner Air

Automotive Resources, Inc. (ARI) has developed a new device for igniting fuel in engines-the SmartPlug.TM SmartPlug is a self-contained ignition system that may be retrofitted to existing spark-ignition and compression-ignition engines. The SmartPlug needs as little as six watts of power for warm-up, and requires no electricity at all when the engine is running. Unlike traditional spark plugs, once the SmartPlug ignites the engine, and the engine heats up, the power supply for the plug is no longer necessary. In the utility industry, SmartPlugs can be used in tractors, portable generators, compressors, and pumps. In addition to general-purpose applications, such as lawn mowers and chainsaws, SmartPlugs can also be used in the recreational, marine, aviation, and automotive industries. Unlike traditional ignition systems, the SmartPlug system requires no distributor, coil points, or moving parts. SmartPlugs are non-fouling, with a faster and cleaner burn than traditional spark plugs. They prevent detonation and are not sensitive to moisture, allowing them to be used on a variety of engines. Other advantages include no electrical noise, no high voltage, exceptionally high altitude capabilities, and better cold-start statistics than those of standard spark ignition systems. Future applications for the SmartPlug are being evaluated by manufacturers in the snowmobile industry.

Source record↗
NASA NTRS1986

Technology for Smoother Transit

A NASA-developed meter and computer model offers the first verifiable way of measuring ride quality. It transforms individual noise and vibration elements into subjective units, then translates the units into a discomfort index. The meter was designed by Wyle Laboratories under NASA contract. It performs well and has been sold to major manufacturers.

Source record↗
NASA NTRS1984

Technology for Smoother Transit

Langley Research Center has developed a portable, self contained ride quality meter for accessing ride quality during vehicle operation. System is applicable to air, sea, road, or track vehicles for estimating passenger ride comfort in the presence of complex vibrations and interior noise. Meter has three components: a package of three vibration sensors, a microphone, and a computer. Installed on the floor of the vehicle being tested, sensors measure vibrations in five different axes, microphone measures noise level, and computer processes input from both and gives user a printed readout including a number of options for assessing ride quality.

Source record↗
NASA NTRS1993

Uniform convergence of multigrid V-cycle iterations for indefinite and nonsymmetric problems

In this paper, we present an analysis of a multigrid method for nonsymmetric and/or indefinite elliptic problems. In this multigrid method various types of smoothers may be used. One type of smoother which we consider is defined in terms of an associated symmetric problem and includes point and line, Jacobi, and Gauss-Seidel iterations. We also study smoothers based entirely on the original operator. One is based on the normal form, that is, the product of the operator and its transpose. Other smoothers studied include point and line, Jacobi, and Gauss-Seidel. We show that the uniform estimates for symmetric positive definite problems carry over to these algorithms. More precisely, the multigrid iteration for the nonsymmetric and/or indefinite problem is shown to converge at a uniform rate provided that the coarsest grid in the multilevel iteration is sufficiently fine (but not depending on the number of multigrid levels).

Bramble, James H.↗
NASA NTRS1984

Improved Carrier Tracking by Smoothing Estimators

Smoothing as a way to improve the carrier phase estimation is proposed and analyzed. The performance of first and second order Kalman optimum smoothers are investigated. This performance is evaluated in terms of steady state covariance error computation, dynamic tracking, and noise response. It is shown that with practical amounts of memory, a second order smoother can have a position error due to an acceleration or jerk step input less than any prescribed maximum. As an example of importance to the NASA Deep Space Network, a second order smoother can be used to track the Voyager spacecraft at Uranus and Neptune encounters with significantly better performance than a second order phase locked loop.

Raez, C. A. P.↗
NASA NTRS1985

Improved carrier tracking by smoothing estimators

Smoothing as a way to improve the carrier phase estimation is proposed and analyzed. The performance of first and second order Kalman optimum smoothers are investigated. This performance is evaluated in terms of steady state covariance error computation, dynamic tracking, and noise response. It is shown that with practical amounts of memory, a second order smoother can have a position error due to an acceleration or jerk step input less than any prescribed maximum. As an example of importance to the NASA Deep Space Network, a second order smoother can be used to track the Voyager spacecraft at Uranus and Neptune encounters with significantly better performance than a second order phase locked loop.

Pomalaza-Raez, C. A.↗
NASA NTRS1995

Assimilation of TOPEX Sea Level Measurements with a Reduced-Gravity, Shallow Water Model of the Tropical Pacific Ocean

Sea surface height variability measured by TOPEX is analyzed in the tropical Pacific Ocean by way of assimilation into a wind-driven, reduced-gravity, shallow water model using an approximate Kalman filter and smoother. The analysis results in an optimal fit of the dynamic model to the observations, providing it dynamically consistent interpolation of sea level and estimation of the circulation. Nearly 80% of the expected signal variance is accounted for by the model within 20 deg of the equator, and estimation uncertainty is substantially reduced by the voluminous observation. Notable features resolved by the analysis include seasonal changes associated with the North Equatorial Countercurrent and equatorial Kelvin and Rossby waves. Significant discrepancies are also found between the estimate and TOPEX measurements, especially near the eastern boundary. Improvements in the estimate made by the assimilation are validated by comparisons with independent tide gauge and current meter observations. The employed filter and smoother are based on approximately computed estimation error covariance matrices, utilizing a spatial transformation and an symptotic approximation. The analysis demonstrates the practical utility of a quasi-optimal filter and smoother.

Fukumori, Ichiro↗
NASA NTRS2012

The Nucleus of Comet 9P-Tempel 1: Shape and Geology from Two Flybys

The nucleus of comet Tempel 1 has been investigated at close range during two spacecraft missions separated by one comet orbit of the Sun, 5 1/2 years. The combined imaging covers 70% of the surface of this object which has a mean radius of 2.83 +/- 0.1 km. The surface can be divided into two terrain types: rough, pitted terrain and smoother regions of varying local topography. The rough surface has round depressions from resolution limits (10 m/pixel) up to 1 km across, spanning forms from crisp steep-walled pits, to subtle albedo rings, to topographic rings, with all ranges of morphologic gradation. Three gravitationally low regions of the comet have smoother terrain, parts of which appear to be deposits from minimally modified flows, with other parts likely to be heavily eroded portions of multiple layer piles. Changes observed between the two missions are primarily due to backwasting of scarps bounding one of these probable flow deposits. This style of erosion is also suggested by remnant mesa forms in other areas of smoother terrain. The two distinct terrains suggest either an evolutionary change in processes, topographically- controlled processes, or a continuing interaction of erosion and deposition.

geological↗
NASA NTRS1974

Sequential square root filtering and smoothing of discrete linear systems

A square root information filter/smoother is derived using recursive least-squares arguments. The combined filter/smoother algorithm has the following attributes: (1) it has a square root structure, which enhances numerical accuracy; (2) filter and smoother mechanizations are identical in form, facilitating implementation of the smoother; and (3) storage and computation requirements are modest compared with other smoothing algorithms. Partitioning the results to separate bias parameters provides further computational economies and reduction of storage requirements.

Bierman, G. J.↗