Search NASA⌕ Search

SEARCH · Search NASA

Results for “solubility determination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Thermally stable, low dielectric polyquinolines for aerospace and electronics applications

Four new high molecular weight, linear chain polyquinolines have been synthesized and fabricated into high quality free standing films. These polymers are characterized by moderate to high glass transition temperatures, excellent thermal and thermooxidative stability, extremely low dielectric constants and good planarizing characteristics. The polymers absorb very low quantities of moisture. As a consequence, the dielectric constant of one new polyquinoline has been shown to be quite insensitive to exposure to warm/wet conditions. Isothermal aging of one new derivative in air has been carried out at elevated temperatures (250 C to 345 C). The results demonstrate truly outstanding thermooxidative stability. Additional characterizations include molecular weight determinations, solubilities and film-forming characteristics, density measurements, and UV-Vis spectroscopy. The data acquired to date suggest that the polymers may find use as refractive films and coatings and as interlevel planarizers in microelectronics applications.

Hendricks, Neil H.↗
NASA NTRS1992

The effects of acid treatment and calcium ions on the solubility of concanavalin A

The effects of acid treatment (which removes Mn and Ca ions) and Ca(2+) ions on the solubility of jack-bean-meal concanavalin A were investigated using two techniques: the sitting drop technique and the microcolumn technique. It was found that the solubility of concanavalin A varied with the protein preparation procedures and with measurement techniques. Addition of Ca(2+) resulted in greatly lowered solubilities compared with the acid treated protein. The sitting drop solubilities for the recalcified protein agreed better with those reported by Mikol and Giege (1989) than with solubilities determined from column data.

Cacioppo, Elizabeth↗
DOE OSTI2020

Experimental determination of the solubility constant of kurnakovite, MgB3O3(OH)5·5H2O

In this study, I present experimental results on the equilibrium between boracite [Mg 3 B 7 O 13 C1(cr)] and kurnakovite [chemical formula, Mg 2 B 6 O 11 ·15H 2 O(cr); structural formula, MgB 3 O 3 (OH) 5 ·5H 2 O(cr)] at 22.5 ± 0.5 °C from a long-term experiment up to 1629 days, approaching equilibrium from the direction of supersaturation, Mg 3 B 7 O 13 C1(cr) + H + + 2B(OH)$^-_4$ + 18H 2 O(1) ⇌ 3MgB 3 O 3 (OH) 5 ·5H 2 O(cr) + C1 - . Based on solubility measurements, the 10-based logarithm of the equilibrium constant for the above reaction at 25 °C is determined to be 12.83 ± 0.08 (2σ). Based on the equilibrium constant for dissolution of boracite, Mg 3 B 7 O 13 C1(cr) + 15H 2 O(1) = 3Mg 2+ + 7B(OH)$^-_4$ + C1 - + 2H + at 25 °C measured previously (Xiong et al. 2018) and that for the reaction between boracite and kurnakovite determined here, the equilibrium constant for dissolution of kurnakovite, MgB 3 O 3 (OH) 5 ·5H 2 O(cr) = Mg 2+ + 3B(OH)$^-_4$ + H + + H 2 O(1) is derived as -14.11 ± 0.40 (2σ). Using the equilibrium constant for dissolution of kurnakovite obtained in this study and the experimental enthalpy of formation for kurnakovite from the literature, a set of thermodynamic properties for kurnakovite at 25 °C and 1 bar is recommended as follows: Δ H $^0_f$ = -4813.24 ± 4.92 kJ/mol, Δ G$^0_f$ = -4232.0 ± 2.3 kJ/mol, and S 0 = 414.3 ± 0.9 J/(mol·K). Among them, the Gibbs energy of formation is based on the equilibrium constant for kurnakovite determined in this study; the enthalpy of formation is from the literature (Li et al. 1997), and the standard entropy is calculated internally with the Gibbs-Helmholtz equation in this work. The thermodynamic properties of kurnakovite estimated using the group contribution method for borate minerals based on the sums of contributions from the cations, borate polyanions, and structural water to the thermodynamic properties from the literature (Li et al. 2000) are consistent, within their uncertainties, with the values listed above. Since kurnakovite usually forms in salt lakes rich in sulfate, studying the interactions of borate with sulfate is important to modeling kurnakovite in salt lakes. Finally, for this purpose, I have re-calibrated our previous model (Xiong et al. 2013) describing the interactions of borate with sulfate based on the new solubility data for borax in Na 2 SO 4 solutions presented here.

36 MATERIALS SCIENCE↗
NASA NTRS1992

Experimental determination of the solubility of iridium in silicate melts: Preliminary results

Little is known of the geochemical behavior of iridium. Normally this element is taken to be chalcophile and/or siderophile so that during planetary differentiation processes, e.g., core formation, iridium is extracted from silicate phases into metallic phases. Experimental determination of the metal/silicate partition coefficient of iridium is difficult simply because it is so large. Also there are no data on the solubility behavior of iridium in silicate melts. With information on the solubility of iridium in silicate melts it is possible, in combination with experimental data for Fe-Ir alloys, to calculate the partition coefficient between a metallic phase and a silicate melt.

Borisov, Alexander↗
NASA NTRS1972

Quantitation of buried contamination by use of solvents. Part 1: Solvent degradation of amine cured epoxy resins

The solubility and/or swelling of cured epoxy resins was studied using the solubility parameter method. Determination of solubility parameters were found in order to select solvents for solvent-assisted degradation of cured epoxy polymers used in spacecraft. A method for improving recovery of seeded spores is suggested for assay of buried contaminants. Three commercial epoxy resins were cured using four different alkyl amines. For each resin-amine combination, three levels of amine were used, corresponding to 1/3, 2/3, and all of the amine required to react with the oxirane groups of the resin. The solubility parameters of the 36 resulting model compounds were determined in poorly and moderately hydrogen-bonded solvents. No strongly hydrogen-bonded solvents caused dissolution or swelling. The tolerance of cured resins is discussed in terms of polymer structure.

Rheineck, A. E.↗
NASA NTRS1984

Solubility of hydrogen in metals and its effect of pore-formation and embrittlement

The effect of alloying elements on hydrogen solubility were determined by evaluating solubility equations and interaction coefficients. The solubility of dry hydrogen at one atmosphere was investigated in liquid aluminum, Al-Ti, Al-Si, Al-Fe, liquid gold, Au-Cu, and Au-Pd. The design of rapid heating and high pressure casting furnaces used in meta foam experiments is discussed as well as the mechanism of precipitation of pores in melts, and the effect of hydrogen on the shrinkage porosity of Al-Cu and Al-Si alloys. Hydrogen embrittlement in iron base alloys is also examined.

Shahani, H. R.↗
NASA NTRS1981

Determination of water-soluble ions in soils from the dry valleys of Antarctica

The soil chemistry of the dry valleys of Antarctica was studied. These valleys furnish a terrestrial analog for the surface of Mars. The abundance of the water-soluble ions magnesium, calcium, potassium, sodium chloride, and nitrate in soil samples was determined. All samples examined contained water-soluble salts reflecting the aridity of the area. Movement of salts to low-lying areas was verified. Upward ionic migration was evident in all core samples. Of all cations observed, sodium showed the greatest degree of migration.

Bustin, R.↗
NASA NTRS1990

Nitric acid uptake by sulfuric acid solutions under stratospheric conditions - Determination of Henry's Law solubility

The uptake of nitric acid by sulfuric acid solutions representative of stratospheric particulate at low temperatures was measured to determine the solubility of nitric acid in sulfuric acid solutions as a function of H2SO4 concentration and solution temperature. Solubilities are reported for sulfuric acid solutions ranging from 58 to 87 wt pct H2SO4 over a temperature range from 188 to 240 K, showing that, in general, the solubility of nitric acid increases with decreasing sulfuric acid concentration and with decreasing temperature. The measured solubilities indicate that nitric acid in the global stratosphere will be found predominantly in the gas phase.

Reihs, Christa M.↗
DOE OSTI2020

Metastable solubility and local structure of amorphous calcium carbonate (ACC)

The properties of amorphous calcium carbonate provide the foundation for understanding mineralization of calcified skeletons but inconsistencies between studies suggest the physical picture is incomplete. This study quantifies the metastable solubility and structure of ACC produced under a series of chemical conditions. Using complementary in situ methods that quantify ACC structure (in situ PDF analysis) in parallel with chemical composition (TGA, ICP-OES), we find two short-range structures are produced that also show distinct morphological differences. Conditions with high carbonate ion concentrations stabilize a Ca-rich ACC with short-range order that is independent of Mg content. In contrast, low carbonate solutions favor Mg-rich ACC with mixed Ca- and Mg-short range order. Measurements of solubility product determined from supersaturated and undersaturated conditions find the distinctive structures are related to solution carbonate activity while solubility is primarily determined by the magnesium content of the solid. Bulk solubility is a composite that concurs with established values. The findings demonstrate the type of ACC that forms is tuned by Mg2+ and CO3-2- concentration and suggest ACC structure, not bulk composition, is a reliable indicator of intermediate phase. This chemical framework also provides a basis for interpreting apparent differences between observations of ACC in synthetic and natural systems that reconciles previous structural studies.

Mergelsberg, Sebastian T.↗
DOE OSTI2022

The solubility of titanite in silicate melt determined from growth and dissolution experiments

The solubility of titanite (CaTiSiO 5 ) in Si-rich melts was measured experimentally through growth experiments at 800–1000 °C, 0.5–1.0 GPa, log fO 2 ~ CCO–0.8, t = 72–168 h, and H 2 O = 0 to 4 wt.%, and in dissolution experiments at 925–1300 °C, 0.8 GPa, t = 18–118 h, and H 2 O = 1–10 wt.% in a piston-cylinder apparatus. Run product glasses in growth experiments were homogeneous, and iron loss suppressed ilmenite crystallization. Saturation concentrations in dissolution experiments were estimated by fitting measured diffusion profiles. Titanite solubility increases with increasing temperature and melt composition parameter \(M = {\text{ molar }}\left( {{\text{Na }} + {\text{ K }} + {\text{ 2Ca}}} \right)/\left( {{\text{Al }} \times {\text{ Si}}} \right)\) . Multiple linear regression of glass composition data from growth and dissolution experiments ( n = 29) plus 39 experiments from the LEPR database (Hirschmann et al. 2008 ) yielded the titanite solubility equation (adj. r 2 = 0.95): \(\left( {TiO_{2} } \right)^{melt} \left( {wt.\% } \right) = 0.978 \times M + 0.0048 \times T\left( K \right){-}5.90\) . This model correctly predicted undersaturation in 95% of 2344 experiments from the LEPR database that did not have titanite or rutile. Application to natural rocks yields saturation temperatures that are similar to independent temperature estimates. Finally, this equation should be useful for constraining the temperatures of titanite-saturated melts, for determining whether titanite saturation in magmatic source regions is likely, and for determining when titanite can crystallize and begin to exert an influence on melt geochemistry.

58 GEOSCIENCES↗
DOE OSTI2021

Vapor-Liquid Partitioning of Methylmercury Compounds: Fundamental Data to Support the Savannah River Site Liquid Waste System: Henry's Law, Solubility and Vapor Pressure Determination for Representative Methylmercury Compounds

The Savannah River Site (SRS) Liquid Waste System (LWS) contains approximately 66 tons of mercury within the liquids, salts, and sludges that are currently being processed into final wasteforms for disposal. Mercury concentrations within the system exceed those typically experienced in environmental or industrial systems; thus, management of mercury compounds continues to be a priority for SRS. In the LWS, waste is vitrified into a borosilicate glass wasteform that contains most of the radioactivity, while the lower activity solutions are dispositioned in a low-level grout wasteform, or “saltstone”. The alkaline, high ionic strength caustic wastes are pumped, evaporated, and otherwise managed throughout the LWS and Defense Waste Processing Facility (DWPF) as they are stored and prepared for conversion to the final wasteforms. Because of the complexity of this system, a key component of effective mercury management in the LWS requires analysis of mercury in various physical phases. The high concentration of mercury within the SRS LWS has the potential to generate vapor-phase contamination. Elemental mercury (Hg 0 ), dimethylmercury ((CH 3 ) 2 Hg), and methylmercury (CH 3 Hg + ) are among species known or suspected to contribute to the flux of mercury from liquid to vapor phase (Iverfeldt and Lindquist, 1982). Chemical speciation affects not only mercury behavior in LWS operations but may also affect the performance of mercury treatment and removal technologies in the LWS.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Mobility of heavy rare earth elements in magmatic-hydrothermal systems: Experimental determination of DyPO 4 solubility in supercritical fluids

Dysprosium (Dy) is part of the heavy rare earth elements (REE) and a critical component in the production of high-performance super magnets used in wind turbines, electric vehicles, and other green technologies. The HREE phosphate, xenotime, is commonly associated with hydrothermal systems, where the mobility, fractionation, and deposition of REE are controlled by the stability of aqueous complexes and solubility of REE minerals which depend on temperature, pressure, and fluid composition (salinity, pH, and ligand availability). Here, we conducted a series of synthetic DyPO 4 solubility experiments in NaCl-HCl-bearing aqueous solutions (pH of 2 at 25 °C) from 500 to 700 °C and 1.5 kbar using externally heated pressure vessels. DyPO 4 displays a strong prograde solubility with temperature across all studied fluid salinities (0–0.5 m NaCl). The DyPO₄ solubility isotherms at 500 °C, 600 °C, and 700 °C show a complex relationship with salinity where DyPO₄ solubility is highest (39.2–1552 ppm at 500–700 °C) in 0 m NaCl solutions, decreases strongly (21–331 ppm at 500–700 °C) in the 0.06 m NaCl solutions and remains relatively constant in the 0.25 m (42.8–248 ppm) and 0.5 m NaCl (40.2–124 ppm) solutions. Thermodynamic modeling suggests that pH increases as a function of temperature and salinity, and controls solubility due to the stability of chloride complexes (i.e., DyCl +2 and DyCl 2 + ) at 500–600 °C, transitioning to hydroxyl complexes (i.e., Dy(OH) 3 0 ) dominating at 700 °C and relatively alkaline pH. Comparison with NdPO 4 solubility data indicates that the light REE in monazite is significantly more soluble than the heavy REE in xenotime in saline fluids at high temperature (500–700 °C), implying efficient light/heavy REE fractionation in supercritical fluids. The lower solubility of DyPO 4 relative to NdPO 4 suggests that at high temperatures, acidic (pH 2–4), low-salinity (∼5 wt% NaCl) fluids will favor the precipitation of xenotime over monazite as it will cool from 700 °C to below 500 °C. These observations align with paragenetic mineral assemblages in NYF pegmatites (e.g., Baveno, Italy), where xenotime commonly immobilizes heavy REE during the high-temperature hydrothermal stages.

58 GEOSCIENCES↗