Search NASA⌕ Search

SEARCH · Search NASA

Results for “sparse arrays”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Hybrid Li-air battery cathodes with sparse carbon nanotube arrays directly grown on carbon fiber papers

Sparsely populated, vertically aligned nitrogen doped carbon nanotube arrays (CNTAs) with dislocated-graphene stacking were grown directly on carbon fiber papers and investigated as hierarchical air cathodes in hybrid Li-air batteries with aqueous catholytes. The CNTAs were made with electrodeposited Ni nanocatalysts, followed by plasma-enhanced chemical vapor deposition. The thus obtained CNTAs can reach a population number density as low as similar to 10(7) per cm(2) on the carbon fibers, achieving an extremely high porosity of over 99% for the active layer in the cathode. The sparse CNTAs not only provide effective pathways for the reacting species, but also show a significantly high catalytic activity, which is found to be comparable to that of a supported Pt electrocatalyst. The high activity of the CNTAs is attributed to the rich graphene edges exposed on the CNT surface and nitrogen doping. Hybrid Li-air batteries with such cathodes have shown a consistent discharging capacity of 710 mA h g(-1) and a specific energy of 2057 W h kg(-1) at 0.5 mA cm(-2). Stable charge-discharge cycling at 0.5 mA cm(-2) showed an average potential difference of 1.35 V, indicative of a relatively small overpotential and high round trip efficiency (71%). Furthermore, the hybrid Li-air battery based on the hierarchical cathode can reach a power density as high as 10.4 mW cm(-2).

Li, YF↗

Impulsive Magnetic Anomaly Detection At the 100-m Scale With an Array of Induction Coil Magnetometers

We demonstrate magnetic anomaly detection (MAD) using an array of 24 commercial induction coil magnetometers with stand-off distances from a pulsed 99.8(3) kA·m 2 magnetic dipole source of 260–1200 m. The sparse array is used to estimate the magnetic dipole location, magnitude, and orientation. We demonstrate how independent component analysis (ICA) improves the accuracy and precision of the magnetometer array when estimating the dipole parameters. Using sensor responses recorded from individual source pulses, we estimate the dipole location to within 29 ± 2 m, the magnitude to within 3 ± 3 kA·m 2 , and dipole orientation error to within 19 ± 0.6°.

47 OTHER INSTRUMENTATION↗

Hybrid Synthetic/Real Aperture Antenna for High Resolution Microwave Imaging

Observations of key hydrological parameters at the spatial and temporal scales required in the post-2002 era face significant technological challenges. These measurements are based on relatively low frequency thermal microwave emission (at 1.4 GHz for soil moisture and salinity, 10 GHz and up for precipitation, and 19 and 37 GHz for snow). The long wavelengths at these frequencies coupled with the high spatial and radiometric resolutions required by the various global hydrology missions necessitate the use of very large apertures. Two-dimensional Synthetic Thinned Array Radiometry (2-D STAR), though promising in the long term, has many technical challenges in the areas of power, and sensitivity for very large apertures (i.e. greater than 300 wavelengths). This paper will discuss an alternative approach to the pure 2-D STAR, which uses an offset parabolic cylinder reflector fed by multiple elements to form a 1-D STAR. In essence a single STAR element is composed of a feedhorn and parabolic cylinder reflector. The elements are sparsely arrayed and thus can share a single reflector. This antenna would have no moving parts once deployed, have much higher sensitivity than a Y-shaped 2-D STAR of equivalent size, many fewer receivers than that 2-D STAR, and the reflector could be made of a thin film and lightweight deployment system for high packing density. The instrument using this approach would be a cross track push broom imager. An overview of the design parameters, potential deployment mechanisms and applications will be presented.

Doiron, Terence A.↗

A One-Dimensional Synthetic-Aperture Microwave Radiometer

A proposed one-dimensional synthetic- aperture microwave radiometer could serve as an alternative to either the two-dimensional synthetic-aperture radiometer described in the immediately preceding article or to a prior one-dimensional one, denoted the Electrically Scanned Thinned Array Radiometer (ESTAR), mentioned in that article. The proposed radiometer would operate in a pushbroom imaging mode, utilizing (1) interferometric cross-track scanning to obtain cross-track resolution and (2) the focusing property of a reflector for along-track resolution. The most novel aspect of the proposed system would be the antenna (see figure), which would include a cylindrical reflector of offset parabolic cross section. The reflector could be made of a lightweight, flexible material amenable to stowage and deployment. Other than a stowage/deployment mechanism, the antenna would not include moving parts, and cross-track scanning would not entail mechanical rotation of the antenna. During operation, the focal line, parallel to the cylindrical axis, would be oriented in the cross-track direction, so that placement of receiving/radiating elements at the focal line would afford the desired along-track resolution. The elements would be microwave feed horns sparsely arrayed along the focal line. The feed horns would be oriented with their short and long cross-sectional dimensions parallel and perpendicular, respectively, to the cylindrical axis to obtain fan-shaped beams having their broad and narrow cross-sectional dimensions parallel and perpendicular, respectively, to the cylindrical axis. The interference among the beams would be controlled in the same manner as in the ESTAR to obtain along-cylindrical- axis (cross-track) resolution and cross-track scanning.

Doiron, Terence↗

Polarimetric Geometric Modeling for mm-VLBI Observations of Black Holes

The Event Horizon Telescope (EHT) is a millimeter very long baseline interferometry (VLBI) array that has imaged the apparent shadows of the supermassive black holes M87* and Sagittarius A*. Polarimetric data from these observations contain a wealth of information on the black hole and accretion flow properties. In this work, we develop polarimetric geometric modeling methods for mm-VLBI data, focusing on approaches that fit data products with differing degrees of invariance to broad classes of calibration errors. We establish a fitting procedure using a polarimetric “m-ring” model to approximate the image structure near a black hole. By fitting this model to synthetic EHT data from general relativistic magnetohydrodynamic models, we show that the linear and circular polarization structure can be successfully approximated with relatively few model parameters. We then fit this model to EHT observations of M87* taken in 2017. In total intensity and linear polarization, the m-ring fits are consistent with previous results from imaging methods. In circular polarization, the m-ring fits indicate the presence of event-horizon-scale circular polarization structure, with a persistent dipolar asymmetry and orientation across several days. The same structure was recovered independently of observing band, used data products, and model assumptions. Despite this broad agreement, imaging methods do not produce similarly consistent results. Our circular polarization results, which imposed additional assumptions on the source structure, should thus be interpreted with some caution. Polarimetric geometric modeling provides a useful and powerful method to constrain the properties of horizon-scale polarized emission, particularly for sparse arrays like the EHT.

79 ASTRONOMY AND ASTROPHYSICS↗

Spray: Sparse Reductions of Arrays in OPEN MP

We present SPRAY, an open-source header-only C++ library for sparse reductions of arrays. SPRAY is meant for applications in which a large array is collaboratively updated by multiple threads using an associative and commutative operation such as +=. Especially when each thread accesses only parts of the array, SPRAY can perform significantly better than OPENMP's built-in reduction clause or atomic updates, while also using less memory than the former. SPRAY provides both an easy-to-use interface that can serve as a drop-in replacement for OPENMP reductions and a selection of reducer objects that accumulate the final result in different thread-safe ways. We demonstrate SPRAY through multiple test cases including the LULESH shock hydrodynamics code and a transpose-matrix-vector multiplication for sparse matrices stored in CSR format. SPRAY reductions outperform built-in OPENMP reductions consistently, in some cases improving run time and memory overhead by 20X, and even beating domain-specific approaches such as Intel MKI, by over 2X in some cases. Furthermore, SPRAY reductions have a minimal impact on the code base, requiring only a few lines of source code changes. Once in place, SPRAY reduction schemes can be switched easily, allowing performance portability and tuning opportunities by separating performance-critical implementation details from application code.

OpenMP↗

Surface Passivation and Carrier Collection in {110}, {100} and Circular Si Microwire Solar Cells

Surface recombination is a major bottleneck for realizing highly efficient micro/nanostructure solar cells. Parametric studies of the influence of Si microwire (SiMW) surface-facet orientation (rectangular with flat-facets, {110}, {100} and circular), with a fixed height of 10 µm, diameter (D = 1.5–9.5 µm), and sidewall spacing (S = 2.5–8.5 µm), and mesh-grid density (1–16 mm -2 ) on recombination and carrier collection in SiMW solar cells with radial p-n junctions are reported. An effective surface passivation layer composed of thin thermally grown silicon dioxide (SiO 2 ) and silicon nitride (SiN x ) layers is employed. For a fixed D of 1.5 µm, tight SiMW spacing results in improved short-circuit current density (J sc = 30.1 mA cm -2 ) and sparse arrays result in open-circuit voltages (V oc = 0.552 V) that are similar to those of control Si planar cells. For a fixed S, smaller D results in better light trapping at shorter wavelengths and higher J sc while larger D exhibits better light trapping at larger wavelengths and a higher V oc . With a mesh-grid electrode the power conversion efficiency increases to 15.3%. Finally, these results provide insights on the recombination mechanisms in SiMW solar cells and provide general design principles for optimizing their performance.

14 SOLAR ENERGY↗

A zone-level occupancy counting system for commercial office spaces using low-resolution time-of-flight sensors

Understanding the locations of occupants in a commercial built environment is critical for realizing energy savings by delivering lighting, heating, and cooling only where it is needed. In this paper, we present an indoor occupancy counting system using a sparse array of inexpensive, low-resolution, and privacy-preserving time-of-flight sensors. We develop and validate an algorithm for zonal occupancy counting that can deal with multiple people walking underneath the sensors in arbitrary directions, and evaluate the system both in realistic simulations of office spaces and in a real-world installation. Finally, we found that our system has an error rate of around 0.4%, resulting in highly accurate person localization and zone counting using only a few sensors per space.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Observations of Ocean Surface Wave Attenuation in Sea Ice Using Seafloor Cables

Abstract The attenuation of ocean surface waves during seasonal ice cover is an important control on the evolution of Arctic coastlines. The spatial and temporal variations in this process have been challenging to resolve with conventional sampling using sparse arrays of moorings or buoys. We demonstrate a novel method for persistent observation of wave‐ice interactions using distributed acoustic sensing (DAS) along existing seafloor fiber optic telecommunications cables. DAS measurements span a 36‐km cross‐shore cable on the Beaufort Shelf from Oliktok Point, Alaska. DAS optical sensing of fiber strain‐rate provides a proxy for seafloor pressure, which we calibrate with wave buoy measurements during the ice‐free season (August 2022). We apply this calibration during the ice formation season (November 2021) to obtain unprecedented resolution of variable wave attenuation rates in new, partial ice cover. The location and strength of wave attenuation serve as proxies for ice coverage and thickness, especially during rapidly evolving events.

Smith, Madison M.↗

Mn solid solutions in self-assembled Ge/Si (001) quantum dot heterostructures

Heteroepitaxial Ge{sub 0.98}Mn{sub 0.02} quantum dots (QDs) on Si (001) were grown by molecular beam epitaxy. The standard Ge wetting layer-hut-dome-superdome sequence was observed, with no indicators of second phase formation in the surface morphology. We show that Mn forms a dilute solid solution in the Ge quantum dot layer, and a significant fraction of the Mn partitions into a sparse array of buried, Mn-enriched silicide precipitates directly underneath a fraction of the Ge superdomes. The magnetic response from the ultra-thin film indicates the absence of robust room temperature ferromagnetism, perhaps due to anomalous intermixing of Si into the Ge quantum dots.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

TWO EFFICIENT, NEW TECHNIQUES FOR DETECTING DISPERSED RADIO PULSES WITH INTERFEROMETERS: THE CHIRPOLATOR AND THE CHIMAGEATOR

Searching for dispersed radio pulses in interferometric data is of great scientific interest, but poses a formidable computational burden. Here, we present two efficient, new antenna-coherent solutions: The Chirpolator and The Chimageator. We describe the equations governing both techniques and propose a number of novel optimizations. We compare the implementation costs of our techniques with classical methods using three criteria: the operation rates (1) before and (2) after the integrate-and-dump stage, and (3) the data rate directly after the integrate-and-dump stage. When compared with classical methods, our techniques excel in the regime of sparse arrays, where they both require substantially lower data rates, and The Chirpolator requires a much lower post-integrator operation rate. In general, our techniques require more pre-integrator operations than the classical ones. We argue that the data and operation rates required by our techniques are better matched to future supercomputer architectures, where the arithmetic capability is outstripping the bandwidth capability. Our techniques are, therefore, viable candidates for deploying on future interferometers such as the Square Kilometer Array.

79 ASTRONOMY AND ASTROPHYSICS↗

Juvenile salmonid migratory behavior at the mouth of the Columbia River and within the plume

A total of 8,159 acoustic-tagged salmonid smolts were detected at the mouth of the Columbia River. Of the fish detected at the mouth, 14% of yearling Chinook salmon, 9% of steelhead, and 22% of subyearling Chinook salmon were detected on a sparse array deployed in the Columbia River plume. Chinook salmon smolts decreased travel rate as they left the river and entered the plume, while steelhead increased travel rate. Chinook salmon also spent more time in the transitional area between the river mouth and plume as compared to steelhead. In early spring, yearling Chinook salmon and steelhead predominately migrated past the plume array towards the edge of the shelf and to the south. Later in the season, yearling Chinook salmon and steelhead smolts tended to migrate out of the river mouth in a northerly direction. Subyearling Chinook salmon migrated predominately past the portion of the plume array to the north of the river mouth.

salmon, migratory behavior, JSATS, Columbia River,↗

Transfer Printed Microcells with Micro-Optic Concentrators for Low Cost, High Performance Photovoltaic Modules (Final Scientific and Technical Report)

This program of work established and validated a new form factor and fully scalable manufacturing processes for low cost, high performance photovoltaic modules. The programmatic highlights of the work include cost-effective assembly of modules fabricated from single crystalline semiconductor inks by high-throughput transfer printing of the micro-cells, advanced methods of systems level integration of sparse arrays, and design and fabrication of micro optical concentrator arrays that provide significant collection efficiencies of light and high performance of the system when integrated with the PV array module. The designs further provide efficient but fully passive heat management that simplifies fabrication while further enhancing operating capabilities of the modules. This collaborative program of research carried out under this award has exceeded all key guidelines laid out in the original proposal. It first has provided a new means to utilize high performance semiconductor materials in an exceptionally low cost and robust form factor. The technology so engendered by these key materials discoveries, new means of manufacturing, and advanced systems level designs are establishing new benchmarks for reductions in the installed cost/kWh relative to any commercial photovoltaic (PV) energy technology currently in use. The work in this program, having surpassed its key scientific milestones, has gone further and with our partners has now fully validated designs with scalable manufacturing methods for photovoltaic modules that use large-scale arrays of high efficiency solar microcells created from bulk wafers, integrating them in diverse spatial layouts on foreign substrates by transfer printing. Full research modules installed and operating at a utility site since 2010 have established the designs to be a viable PV technology.

36 MATERIALS SCIENCE↗

Can MODIS Data Calibrate and Validate Coastal Sediment Transport Models? Rapid Prototyping Using 250 m Data and the ECOMSED Model for Lake Pontchartrain, LA USA

Field measurements from small boats and sparse arrays of instrumented buoys often do not provide sufficient data to capture the dynamic nature of biogeophysical parameters in may coastal aquatic environments. Several investigators have shown the MODIS 250 m images can provide daily synoptic views of suspended sediment concentration in coastal waters to determine sediment transport and fate. However, the use of MODIS for coastal environments can be limited due to a lack of cloud-free images. Sediment transport models are not constrained by sky conditions but often suffer from a lack of in situ observations for model calibration or validation. We demonstrate here the utility of MODIS 250 m to calibrate (set model parameters), validate output, and set or reset initial conditions of a hydrodynamic and sediment transport model (ECOMSED) developed for Lake Pontchartrain, LA USA. We present our approach in the context of how to quickly assess of 'prototype' an application of NASA data to support environmental managers and decision makers. The combination of daily MODIS imagery and model simulations offer a more robust monitoring and prediction system of suspended sediments than available from either system alone.

Miller, Richard L.↗

Vibration Analysis of the Space Shuttle External Tank Cable Tray Flight Data with and without PAL Ramp

External Tank Cable Tray vibration data for three successive Space Shuttle flights were analyzed to assess response to buffet and the effect of removal of the Protuberance Air Loads (PAL) ramp. Waveform integration, spectral analysis, cross-correlation analysis and wavelet analysis were employed to estimate vibration modes and temporal development of vibration motion from a sparse array of accelerometers and an on-board system that acquired 16 channels of data for approximately the first two minutes of each flight. The flight data indicated that PAL ramp removal had minimal effect on the fluctuating loads on the cable tray. The measured vibration frequencies and modes agreed well with predicted structural response.

Walker, B. E.↗

Determination of a Limited Scope Network's Lightning Detection Efficiency

This paper outlines a modeling technique to map lightning detection efficiency variations over a region surveyed by a sparse array of ground based detectors. A reliable flash peak current distribution (PCD) for the region serves as the technique's base. This distribution is recast as an event probability distribution function. The technique then uses the PCD together with information regarding: site signal detection thresholds, type of solution algorithm used, and range attenuation; to formulate the probability that a flash at a specified location will yield a solution. Applying this technique to the full region produces detection efficiency contour maps specific to the parameters employed. These contours facilitate a comparative analysis of each parameter's effect on the network's detection efficiency. In an alternate application, this modeling technique gives an estimate of the number, strength, and distribution of events going undetected. This approach leads to a variety of event density contour maps. This application is also illustrated. The technique's base PCD can be empirical or analytical. A process for formulating an empirical PCD specific to the region and network being studied is presented. A new method for producing an analytical representation of the empirical PCD is also introduced.

Rompala, John T.↗

Vibration Analysis of the Space Shuttle External Tank Cable Tray Flight Data With and Without PAL Ramp

External Tank Cable Tray vibration data for three successive Space Shuttle flights were analyzed to assess response to buffet and the effect of removal of the Protuberance Air Loads (PAL) ramp. Waveform integration, spectral analysis, cross-correlation analysis and wavelet analysis were employed to estimate vibration modes and temporal development of vibration motion from a sparse array of accelerometers and an on-board system that acquired 16 channels of data for approximately the first 2 min of each flight. The flight data indicated that PAL ramp removal had minimal effect on the fluctuating loads on the cable tray. The measured vibration frequencies and modes agreed well with predicted structural response.

Walker, Bruce E.↗

The Fizeau Interferometer Testbed

The Fizeau Interferometer Testbed (FIT) is a collaborative effort between NASA's Goddard Space Flight Center, the Naval Research Laboratory, Sigma Space Corporation, and the University of Maryland. The testbed will be used to explore the principles of and the requirements for the full, as well as the pathfinder, Stellar Imager mission concept. It has a long term goal of demonstrating closed-loop control of a sparse array of numerous articulated mirrors to keep optical beams in phase and optimize interferometric synthesis imaging. In this paper we present the optical and data acquisition system design of the testbed, and discuss the wavefront sensing and control algorithms to be used. Currently we have completed the initial design and hardware procurement for the FIT. The assembly and testing of the Testbed will be underway at Goddard's Instrument Development Lab in the coming months.

OPTICS DESIGN↗