Search NASA⌕ Search

SEARCH · Search NASA

Results for “stacking modes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Mechanochemistry-driven phase transformation of crystalline covalent triazine frameworks assisted by alkaline molten salts

We report covalent triazine frameworks (CTFs) have shown wide applications in the fields of separation, catalysis, energy storage, and beyond. However, it is a long-term challenging subject to fabricate high-quality CTF materials via facile procedures. Herein, a mechanochemistry-driven procedure was developed to achieve phase transformation of crystalline CTFs assisted by alkaline molten salts. The transformation of CTF-1 from staggered AB to eclipsed AA stacking mode was achieved by short time (30 min) mechanochemical treatment in the presence of molten salts composed of LiOH/KOH, generating high-quality CTF-1 material with high crystallinity, high surface area (625 m 2 g -1 ), and permanent/ordered porosity without carbonization under ambient conditions. This facile procedure could be extended to provide nanoporous three-dimensional CTF materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled growth of ultrathin Mo 2 C superconducting crystals on liquid Cu surface

Exhibiting thickness-dependent change in the critical temperature (T c ) for the onset of superconductivity, Mo 2 C is an important new member in the family of two-dimensional atomic crystals. Controllable growth in terms of morphology and thickness is necessary to elucidate its intrinsic properties at the 2D limit. Here we demonstrate the chemical vapor deposition of ultrathin Mo 2 C crystals on liquid Cu surface where the morphology of the crystals can be controlled by tuning the carbon supersaturation. A unique staggered carbon vacancy ordering is discovered in Mo 2 C crystals having particular geometries. Thickness engineering of the crystal can be achieved by controlling the thickness of the Cu catalyst layer, which affords a facile route to grow ultrathin 2D samples. Ultrathin Mo 2 C crystals so obtained, have been characterized using aberration corrected scanning transmission electron microscopy annular dark field imaging, where the co-existence of both AA and AB stacking modes is observed. The high crystallinity of the Mo 2 C crystals synthesized in this work is attested by its characteristic sharp superconducting transition.

36 MATERIALS SCIENCE↗

Crystal structures of ‘ALternative Isoinformational ENgineered’ DNA in B-form

The first structural model of duplex DNA reported in 1953 by Watson & Crick presented the double helix in B-form, the form that genomic DNA exists in much of the time. Thus, artificial DNA seeking to mimic the properties of natural DNA should also be able to adopt B-form. Using a host–guest system in which Moloney murine leukemia virus reverse transcriptase serves as the host and DNA as the guests, we determined high-resolution crystal structures of three complexes including 5'-CTTBPPBBSSZZSAAG, 5'-CTTSSPBZPSZBBAAG and 5'-CTTZZPBSBSZPPAAG with 10 consecutive unnatural nucleobase pairs in B-form within self-complementary 16 bp duplex oligonucleotides. We refer to this ALternative Isoinformational ENgineered (ALIEN) genetic system containing two nucleobase pairs (P:Z, pairing 2-amino-imidazo-[1,2-a]-1,3,5-triazin-(8H)-4-one with 6-amino-5-nitro-(1H)-pyridin-2-one, and B:S, 6-amino-4-hydroxy-5-(1H)-purin-2-one with 3-methyl-6-amino-pyrimidin-2-one) as ALIEN DNA. We characterized both position- and sequence-specific helical, nucleobase pair and dinucleotide step parameters of P:Z and B:S pairs in the context of B-form DNA. We conclude that ALIEN DNA exhibits structural features that vary with sequence. Further, Z can participate in alternative stacking modes within a similar sequence context as captured in two different structures. This finding suggests that ALIEN DNA may have a larger repertoire of B-form structures than natural DNA.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of Natural Fermentation of Sorghum on Resistant Starch Molecular Structure and Fermentation Property

Relevant research results have suggested that fermentation can increase the content of sorghum amylose chains and their retrogradation value. Therefore, this study explored the effect of fermentation pretreatment on the yield, digestibility, molecular structure, and in vitro fermentation property of sorghum-resistant starch by conducting fermentation pretreatment of sorghum and extracting the resistant starch from fermented sorghum with pressure-heat compound enzyme method. The results were as follows. After fermentation pretreatment, the yield of sorghum-resistant starch increased, the digestibility of sorghum-resistant starch reduced, the laminated structure size on the surface of the particles became more uniform, and the stacking mode became more neat and denser. The sorghum-resistant starch prepared before and after fermentation did not produce new chemical groups, and its functional group peak remained unchanged. After fermentation, the weight-average molecular weight of sorghum-resistant starch was elevated, and the percentage content of high- and low-molecular substances increased and decreased, respectively, compared with that of the unfermented sorghum-resistant starch. The percentage content of short-chain branches in the branched chain increased, whereas that of the long-chain branches decreased; the crystallinity of sorghum-resistant starch after fermentation decreased, and the intensity of X-diffraction peak changed slightly before and after fermentation. According to the results of the in vitro fermentation experiments, the fermentation broth of sorghum-resistant starch had the highest content of butyric acid and short-chain fatty acid. Research results reveal that, after fermentation pretreatment, sorghum-resistant starch presented increased yield, more complex molecular structure, heavier molecular weight and more uniform surface morphology, more efficient butyric acid generation, and greater fermentation rate than unfermented sorghum-resistant starch.

Ge, YunFei↗

Molecular Pivot-Hinge Installation to Evolve Topology in Rare-Earth Metal–Organic Frameworks

Linker desymmetrization has been witnessed as a powerful design strategy for the discovery of highly connected metal–organic frameworks (MOFs) with unprecedented topologies. Herein, we introduce molecular pivot-hinge installation as a linker desymmetrization strategy to evolve the topology of highly connected rare-earth (RE) MOFs, where a pivot group is placed in the center of a linker similar to a hinge. By tuning the composition of pivot groups and steric hindrances of the substituents on various linker rotamers, MOFs with various topologies can be obtained. The combination of L-SO 2 with C 2v symmetry and 12-connected RE9 clusters leads to the formation of a fascinating (4,12)-c dfs new topology. Interestingly, when replacing L-SO 2 with a tetrahedra linker L-O, the stacking behaviors of RE-organic layers switch from an eclipsed mode to a staggered stacking mode, leading to the discovery of an intriguing hjz topology. Additionally, the combination of the RE cluster and a linker [(L-(CH 3 ) 6 )] with more bulky groups gives rise to a flu topology with a new 8-c inorganic cluster. The diversity of these RE-MOFs was further enhanced through post-synthetic installation of linkers with various functional groups. Functionalization of each linker with acidic and basic units in the mesoporous RE-based PCN-90-SO 2 allows for efficient cascade catalytic transformation within the functionalized channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Twisted MoSe 2 bilayers with variable local stacking and interlayer coupling revealed by low-frequency Raman spectroscopy

Unique twisted bilayers of MoSe 2 with multiple stacking orientations and interlayer couplings in the narrow range of twist angles, 60 ± 3°, are revealed by low-frequency Raman spectroscopy and theoretical analysis. The slight deviation from 60 allows the concomitant presence of patches featuring all three high-symmetry stacking configurations (2H or AA', AB', A'B) in one unique bilayer system. In this case, the periodic arrangement of the patches and their size strongly depend on the twist angle. Ab initio modeling predicts significant changes in frequencies and intensities of low-frequency modes versus stacking and twist angle. Experimentally, the variable stacking and coupling across the interface is revealed by the appearance of two breathing modes corresponding to the mixture of the high-symmetry stacking configurations and unaligned regions of monolayers. Only one breathing mode is observed outside the narrow range of twist angles. This indicates a stacking transition to unaligned monolayers with mismatched atom registry without the in-plane restoring force required to generate a shear mode. As a result, the variable interlayer coupling and spacing in transition metal dichalcogenide bilayers revealed in this study may provide a new platform for optoelectronic applications of these materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Determining the twist angle of stacked MoS 2 layers using machine learning-assisted low-frequency interlayer Raman fingerprints

The investigation of twisted stacked few-layer MoS 2 has revealed novel electronic, optical, and vibrational properties over an extended period. For the successful integration of twisted stacked few-layer MoS 2 into a wide range of applications, it is crucial to employ a noninvasive, versatile technique for characterizing the layered architecture of these complex structures. Here, in this work, we introduce a machine learning-assisted low-frequency Raman spectroscopy method to characterize the twist angle of few-layer stacked MoS 2 samples. A feedforward neural network (FNN) is utilized to analyze the low-frequency breathing mode as a function of the twist angle. Moreover, using finite difference method (FDM) and density functional theory (DFT) calculations, we show that the low-frequency Raman spectra of MoS 2 are mainly influenced by the effect of the nearest and second nearest layers. A new improved linear chain model (TA-LCM) with taking the twist angle into the consideration is developed to understand the interlayer breathing modes of stacked few-layer MoS 2 . This approach can be extended to other 2D materials systems and provides an intelligent way to investigate naturally stacked and twisted interlayer interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Centrifugal Sieve for Gravity-Level-Independent Size Segregation of Granular Materials

Conventional size segregation or screening in batch mode, using stacked vibrated screens, is often a time-consuming process. Utilization of centrifugal force instead of gravity as the primary body force can significantly shorten the time to segregate feedstock into a set of different-sized fractions. Likewise, under reduced gravity or microgravity, a centrifugal sieve system would function as well as it does terrestrially. When vibratory and mechanical blade sieving screens designed for terrestrial conditions were tested under lunar gravity conditions, they did not function well. The centrifugal sieving design of this technology overcomes the issues that prevented sieves designed for terrestrial conditions from functioning under reduced gravity. These sieves feature a rotating outer (cylindrical or conical) screen wall, rotating fast enough for the centrifugal forces near the wall to hold granular material against the rotating screen. Conventional centrifugal sieves have a stationary screen and rapidly rotating blades that shear the granular solid near the stationary screen, and effect the sieving process assisted by the airflow inside the unit. The centrifugal sieves of this new design may (or may not) have an inner blade or blades, moving relative to the rotating wall screen. Some continuous flow embodiments would have no inner auger or blades, but achieve axial motion through vibration. In all cases, the shearing action is gentler than conventional centrifugal sieves, which have very high velocity differences between the stationary outer screen and the rapidly rotating blades. The new design does not depend on airflow in the sieving unit, so it will function just as well in vacuum as in air. One advantage of the innovation for batch sieving is that a batch-mode centrifugal sieve may accomplish the same sieving operation in much less time than a conventional stacked set of vibrated screens (which utilize gravity as the primary driving force for size separation). In continuous mode, the centrifugal sieves can provide steady streams of fine and coarse material separated from a mixed feedstock flow stream. The centrifugal sieves can be scaled to any desired size and/or mass flow rate. Thus, they could be made in sizes suitable for small robotic exploratory missions, or for semi-permanent processing of regolith for extraction of volatiles of minerals. An advantage of the continuous-mode system is that it can be made with absolutely no gravity flow components for feeding material into, or for extracting the separated size streams from, the centrifugal sieve. Thus, the system is capable of functioning in a true microgravity environment. Another advantage of the continuous-mode system is that some embodiments of the innovation have no internal blades or vanes, and thus, can be designed to handle a very wide range of feedstock sizes, including occasional very large oversized pieces, without jamming or seizing up.

Walton, Otis R.↗

Real-space simulations of the hyperbolic plasmon polaritons in 1T′ tungsten ditelluride

Recent discoveries of hyperbolic surface plasmon polaritons (SPPs) in 1T′ WTe 2 have garnered significant attention in 2D materials and nanophotonics. In this study, we employ finite-element simulations to investigate the real-space characteristics of hyperbolic SPPs in thin WTe 2 flakes. Our results show that the SPPs exhibit a pronounced sensitivity to excitation energy and sample thickness. By analyzing the plasmonic field patterns, we extract key plasmonic parameters including plasmon wavelengths, hyperbolic angles, and plasmonic figures of merit. In addition, we examine SPP modes in stacked WTe 2 flakes with varying twist angles, demonstrating that the plasmonic field patterns can be effectively tuned by adjusting the twist angle. Notably, as the twist angle increases, the SPPs undergo a topological transition from open hyperbolic modes to closed elliptic modes. This twist-engineering capability offers promising potential for the development of tunable plasmonic devices based on WTe 2 .

2D materials↗

Novel Topology in Semiconducting Tetrathiafulvalene Lanthanide Metal-Organic Frameworks

Tetrathiafulvalene tetrabenzoate (TTFTB) and several lanthanide ions self-assemble into metal-organic frameworks (MOFs) that exhibit a novel topology, a (3,3,3,6,6)-coordinated net, which features an unusual ligand coordination mode and stacking motif. The Yb and Lu MOFs are electrically conductive, with pellet conductivity values of 9(7) × 10 -7 and 3(2) × 10 -7 S/cm, respectively. The crystallographically-determined bond lengths indicate partial oxidation of the ligand, with close S∙∙∙S contacts between ligands providing likely charge transport pathways in the material. Magnetometry reveals temperature-independent paramagnetism, consistent with the presence of ligand-based radicals, as well as weak antiferromagnetic coupling between Yb 3+ centers. Overall, these results illustrate the diversity of MOF structures and properties that are accessible with the TTFTB ligand owing to its electroactive nature, propensity for intermolecular interactions, and conformational flexibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

1-D calcium, 2-D zinc and 3-D manganese coordination polymers derived from pyrazine-2,3,5,6-tetracarboxylic acid

Three coordination polymers were synthesized from pyrazine-2,3,5,6-tetracarboxylic acid (H 4 pztc) in combination with calcium, zinc and manganese ions under hydrothermal conditions and their structures were determined by single crystal X-ray diffraction, powdered X-ray diffraction, Fourier transformed infrared spectroscopy, thermogravimetric and elemental analyses. Structure 1, {(Ca(H 2 pztc)(H 2 O) 3 )n, crystallizes as 1-D chains, with the partially deprotonated ligand in –O,N,O– coordination mode and with the Ca atoms in an uncommon nine coordinate environment. Structure 2, {Zn1(pztc)(H 2 O) 2 Zn2(H 2 O) 4 } n , is an infinite, 2-D coordination network that contains two nonequivalent Zn atoms, each with octahedral geometry, and the fully deprotonated pztc 4- in bis-bridging chelating coordination mode. The stacked 2-D layers are stabilized by extensive inter-layer water-carboxylate hydrogen-bonding with an inter-layer distance of 4.9 Å. Structure 3, {(Mn 2 (pztc)(H 2 O) 2 )} n , is a covalently bonded 3-D network containing two nonequivalent Mn atoms, each with octahedral geometry, and the fully deprotonated pztc 4- units. Structure 3 exhibits paramagnetic behavior at room temperature, and weak antiferromagnetic properties at very low temperature, which is consistent with their nearest Mn…Mn separation distance of 4.9 Å.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predicting Surface Energies and Particle Morphologies of Boehmite (y-AlOOH) from Density Functional Theory

Particle morphology is an important property affecting the reactivity of solid phases. The aluminum oxyhydroxide boehmite (?-AlOOH) is one example for which particle morphology has relevance to geochemistry, environmental management, and catalysis. Morphologies can be predicted from surface and attachment energies obtained from electronic structure calculations but the dependence of these predictions on the level of theory and complexity of the physics involved has been overlooked. Density functional theory calculations were therefore performed for a wide range of exchange-correlation (XC) functionals, including a hybrid functional, to calculate the energetics of the four main low-index surfaces of boehmite both in vacuum and with a water monolayer adsorbed. The approximation used for describing core electrons, the size of the plane-wave basis set, and the need for dispersion corrections were also investigated. The results highlight the critical need for converged plane-wave basis sets to obtain accurate surface energies as well as the strong influence the XC functional can have on surface energies and water adsorption energies. The predicted morphologies were compared to particle morphologies obtained from a variety of synthesis routes both carried out in this work and published in the literature. The comparison showed that, at basic pH, growth morphologies dominated at low temperatures and short time periods whereas equilibrium morphologies were achieved as the temperature and/or aging time increased, which could be explained by the slow stacking growth mode of boehmite along the [010] direction. Finally, calorimetry experiments are often used to derive surface energies, but excess water on hydrophilic surfaces can add significant uncertainty. An approach for correcting the surface energetics obtained by calorimetry using electronic structure calculations is presented.

Prange, Micah P.↗

Bandwidth enhancement of dielectric resonator antennas

An experimental investigation of bandwidth enhancement of dielectric resonator antennas (DRA) using parasitic elements is reported. Substantial bandwidth enhancement for the HE(sub 11delta) mode of the stacked geometry and for the HE(sub 13delta) mode of the coplanar collinear geometry was demonstrated. Excellent radiation patterns for the HE(sub 11delta) mode were also recorded.

Lee, Richard Q.↗

Creep deformation mechanism mapping in nickel base disk superalloys

We investigated the creep deformation mechanisms at intermediate temperature in ME3, a modern Ni-based disk superalloy, using diffraction contrast imaging. Both conventional transmission electron microscopy (TEM) and scanning TEM were utilised. Distinctly different deformation mechanisms become operative during creep at temperatures between 677-815 °C and at stresses ranging from 274 to 724 MPa. Both polycrystalline and single-crystal creep tests were conducted. The single-crystal tests provide new insight into grain orientation effects on creep response and deformation mechanisms. Creep at lower temperatures (≤760 °C) resulted in the thermally activated shearing modes such as microtwinning, stacking fault ribbons and isolated superlattice extrinsic stacking faults. In contrast, these faulting modes occurred much less frequently during creep at 815 °C under lower applied stresses. Instead, the principal deformation mode was dislocation climb bypass. In addition to the difference in creep behaviour and creep deformation mechanisms as a function of stress and temperature, it was also observed that microstructural evolution occurs during creep at 760 °C and above, where the secondary coarsened and the tertiary precipitates dissolved. Based on this work, a creep deformation mechanism map is proposed, emphasising the influence of stress and temperature on the underlying creep mechanisms.

36 MATERIALS SCIENCE↗