Search NASA⌕ Search

SEARCH · Search NASA

Results for “states rubbery states”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

24 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Interfacial Strength in Hierarchical Carbon Fiber Composites: Interplay of Interphase Modulus and Roughness

A facile, direct deposition approach that exploits van der Waals interactions between carbonaceous materials is utilized to create unidirectional hybrid carbon fiber composites. Two small molecule crosslinkers, a trifunctional aromatic (TL) and a difunctional aliphatic (DL) acyl chloride, are first utilized to create a crosslinked interphase with a softer and stiffer modulus respectively. TL crosslinked interphase with a higher modulus improved the tensile strength by 50%, despite non-covalent linking between fiber and matrix, elucidating the critical role of the interphase in alleviating modulus mismatch between the high modulus carbon fiber and the rubbery matrix. Fractional quantities of carbon nanotubes are additionally dispersed in the small molecule crosslinkers which behaved as a dispersant, helping introduce nanoasperities on the carbon fiber surface. Strong “pi-pi” interactions between CNTs and CF contributed to tensile properties, which are increased by 66% compared to the control. A cohesive zone model suggests that a stiffer interphase is better able to exploit surface heterogeneities and roughness on the fiber, synergistically enhancing interfacial strength.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mechanically Accelerated Depolymerization of Entangled Linear Polymer Melts

Mechanical forces can enhance the chemical depolymerization of synthetic polymers when shear flow accelerates chain scission. To quantify the extent of mechanically-accelerated scission, the effect of simple shear flow (duration and strength) with low Weissenberg and Deborah numbers was investigated by considering the impact of applied work in both simple shear and shear dominated mixed flows. Hydrogenated polyisoprene was chosen as a model linear, entangled system. The conditions (strain amplitude, frequency, and shearing time) necessary to increase chain scission were assessed in the rubbery melt. Shear flow accelerated chain scission at higher temperatures, suggesting an activated process. Isothermal scission versus work curves were superposed by applying shift factors a T,S , whose Arrhenius-like temperature dependence gave an apparent activation energy for chain scission of ~ 110 kJ/mol, which is likely a combination of the activation energy of viscosity and bond energy. This work provides a base for quantifying the impact of shear on depolymerization of polymer melts and highlight the connection between viscous dissipation and scission chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Creep suppression and fatigue in bio-based composites manufactured via conventional and large format additive manufacturing processes

The emergence of novel extrusion-based additive manufacturing (AM) processes has prompted the development of new thermoplastic composite feedstocks, and broadening sustainability initiatives have driven the development of bio-based and recyclable material for AM feedstocks. Poly(lactic acid) (PLA) with wood flour (WF) is one composite system that has been demonstrated in numerous AM applications, as well as traditional processing methods (i.e., compression and injection molding); however, there has been a need to understand how the variation in processing methodology impacts the material performance of these bio-based feedstocks from a fundamental perspective, with particular emphasis on creep for an extended application use-life. Herein, PLA/WF is explored as a feedstock material for large format additive manufacturing (LFAM) and the performance of additively manufactured materials is compared to those produced via more traditional processing methods. It is also demonstrated that the addition of WF decreases the material’s coefficient of thermal expansion (CTE) while increasing its Young’s modulus, susceptibility to water uptake, and creep fatigue resistance. Essentially, the addition of 20 wt% WF results in a 92 % decrease in rubbery regime CTE while simultaneously resulting in a 14 % increase in modulus, 190 % increase in water uptake, and a 31 % decrease in residual strain after cyclic creep tests. The processing method was also found to play a large role in the final part performance, with the printed material increasing the crystallinity by 183 % and 214 % compared to its compression and injection molded counterparts. Furthermore, the porosity of printed samples increased by two orders of magnitude compared to samples prepared via traditional processing methods.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Polymer Macrocycles: A novel topology to control dynamics of rubbery materials (Final Report)

We have successfully made synthetic polymer rings that are larger than previously reported having entanglement numbers as high as Z w ≈300 if the rings entangled as do linear chains. The synthesis was carried out using reversible radical recombination polymerization (R3P) of dithiols which produces a polymer with a very small persistence length. The reported results show surprising dilute solution behaviors due to the fact that polymeric rings expand more than their linear counterparts for polymer chains having a large number of persistence lengths, as developed in this study. The results strongly argue for a systematic investigation of the dilute solution properties of rings having different persistence lengths in different quality solvents, where the theta-condition should lead to results that are independent of the persistence length. For the rheological investigations related to chain entanglements, the polyDODT rings could be diluted so that the rheological data covered from less than one entanglement spacing relative to the linear counterpart to a value of Z w =300. Importantly, because we were able to dilute extremely high entanglement number polyDODT rings to a similar entanglement number as those reported for polystyrene rings that were highly purified using LCCC, we demonstrated that the dynamics of the polyDODT rings virtually overlaps with the dynamics of the polystyrene rings which is very strong evidence that these high molecular weight polyDODT rings are of high purity. Our results demonstrate that the onset of entanglement in rings, as evidenced by the appearance of a rubbery plateau G N 0 and by the onset of a strong power-law dependence of the viscosity on molecular weight (η~M w 5.8 ) or entanglement number (η~Z w 5.8 ), occurs at much higher molecular weights or polymer concentrations than is the case for linear chains. These results should serve as a benchmark for future investigations of the behavior of entangled, circular macromolecules.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Polymer Macrocycles: A novel topology to control dynamics of rubbery materials

We have successfully made synthetic polymer rings that are larger than previously reported having entanglement numbers as high as $Z_w$≈300 if the rings entangled as do linear chains. The synthesis was carried out using reversible radical recombination polymerization (R3P) of dithiols which produces a polymer with a very small persistence length. The reported results show surprising dilute solution behaviors due to the fact that polymeric rings expand more than their linear counterparts for polymer chains having a large number of persistence lengths, as developed in this study. The results strongly argue for a systematic investigation of the dilute solution properties of rings having different persistence lengths in different quality solvents, where the theta-condition should lead to results that are independent of the persistence length. For the rheological investigations related to chain entanglements, the polyDODT rings could be diluted so that the rheological data covered from less than one entanglement spacing relative to the linear counterpart to a value of $Z_w$=300. Importantly, because we were able to dilute extremely high entanglement number polyDODT rings to a similar entanglement number as those reported for polystyrene rings that were highly purified using LCCC, we demonstrated that the dynamics of the polyDODT rings virtually overlaps with the dynamics of the polystyrene rings which is very strong evidence that these high molecular weight polyDODT rings are of high purity. Our results demonstrate that the onset of entanglement in rings, as evidenced by the appearance of a rubbery plateau $G_N^0$ and by the onset of a strong power-law dependence of the viscosity on molecular weight (η~$M_w^{5.8}$) or entanglement number (η~$Z_w^{5.8}$), occurs at much higher molecular weights or polymer concentrations than is the case for linear chains. These results should serve as a benchmark for future investigations of the behavior of entangled, circular macromolecules.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Multimaterial 3D Printing in Activating Bath Enables In Situ Polymerization of Thermosets with Intricate Geometries and Diverse Elastic Behaviors

Polydicyclopentadiene, p(DCPD), is a high‐performance thermoset valued for its exceptional toughness, strength, and stiffness. When copolymerized with 1,5‐cyclooctadiene (COD), its mechanical properties can be tuned from glassy to rubbery at room temperature. While frontal polymerization enables a rapid and energy‐efficient route to 3D print DCPD‐based materials, challenges such as ink shelf life and gravitational distortion, especially in direct ink writing of soft COD‐rich formulations, must be considered. Here, a complementary chemical strategy is presented, embedded 3D printing, that enables localized in situ polymerization of printed DCPD/COD inks within a reactive support matrix. The matrix provides both physical support and a reservoir of chemical activator, which diffuses into the ink, activates a latent bis(N‐heterocyclic carbene) Ru precatalyst, and initiates ring‐opening metathesis polymerization. Curing begins at the ink–matrix interface and propagates inward via diffusion, stabilizing the interface and preventing capillary‐driven deformation regardless of the matrix yield stress. This approach eliminates the need for cold storage, external curing, or photoinitiation, significantly expanding the processing window. Using this method, diverse thermosetting and elastomeric architectures are fabricated with features as small as 5 µm and aspect ratios of 100, including interlinked chains, shallow spherical shells exhibiting snap‐through buckling, and hair‐like fin arrays inaccessible through traditional techniques.

chemical activation↗