SEARCH · Search NASA

Results for “static structure factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Observation of High-Frequency Transverse Phonons in Metallic Glasses

Here, using inelastic neutron scattering and molecular dynamics simulations on a model Zr-Cu-Al metallic glass, we show that transverse phonons persist well into the high-frequency regime, and can be detected at large momentum transfer. Furthermore, the apparent peak width of the transverse phonons was found to follow the static structure factor. The one-to-one correspondence, which was demonstrated for both Zr-Cu-Al metallic glass and a three-dimensional Lennard-Jones model glass, suggests a universal correlation between the phonon dynamics and the underlying disordered structure. This remarkable correlation, not found for longitudinal phonons, underscores the key role that transverse phonons hold for understanding the structure-dynamics relationship in disordered materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Emergence of Intermediate Range Order in Jammed Packings

We perform a structural analysis of large scale jammed packings of monodisperse, frictionless and frictional spheres to elucidate structural signatures of the static structure factor in the low-to-intermediate wave number region. We employ discrete element method simulations containing up to 8×10^{7} particles, in which the particle friction coefficient(s), including sliding, rolling, and twisting interactions, are varied. At intermediate wave number values, corresponding to length scales that lie between that of the nearest neighbor primary peak and the system size, we find the emergence of a prepeak-a signature of intermediate range order-that grows with increasing friction. We correlate the emergence of this peak to real space fluctuations in the local particle coordination number, which exhibits a grainy fluctuating field throughout the packing process that is retained in the final, mechanically stable state. While the formation of the prepeak shows varying degrees of robustness to packing protocol changes, our results suggest that preparation history may be used to construct packings with variable large length scale structural properties.

Monti, Joseph M↗

DOE OSTI2024

A numerical study of bounds in the correlations of fractional quantum Hall states

We numerically compute the guiding center static structure factor \bar S(k) S ‾ ( k ) of various fractional quantum Hall (FQH) states to \mathcal{O}(k\ell)^6 𝒪 ( k ℓ ) 6 where k k is the wavenumber and \ell ℓ is the magnetic length. Employing density matrix renormalization group on an infinite cylinder of circumference L_y L y , we study the two-dimensional limit using L_y/\xi \gg 1 L y / ξ ≫ 1 , where \xi ξ is the correlation length. The main findings of our work are: 1) the ground states that deviate away from the ideal conformal block wavefunctions, do not saturate the Haldane bound, and 2) the coefficient of O(k\ell)^6 O ( k ℓ ) 6 term appears to be bounded above by a value predicted by field theories proposed in the literature. The first finding implies that the graviton mode is not maximally chiral for experimentally relevant FQH states.

Kumar, Prashant (ORCID:0000000258002768)↗

NASA NTRS1984

Acoustic structure and propagation in highly porous, layered, fibrous materials

The acoustic structure and propagation of sound in highly porous, layered, fine fiber materials is examined. Of particular interest is the utilization of the Kozeny number for determining the static flow resistance and the static structure factor based on flow permeability measurements. In this formulation the Kozeny number is a numerical constant independent of volume porosity at high porosities. The other essential parameters are then evaluated employing techniques developed earlier for open cell foams. The attenuation and progressive phase characteristics in bulk samples are measured and compared with predicted values. The agreements on the whole are very satisfactory.

Lambert, R. F.↗

NASA NTRS1984

Acoustic structure and propagation in highly porous, layered, fibrous materials

Lambert, R. F.↗

NASA NTRS1994

Asymmetry parameters of the phase function for densely packed scattering grains

Spatial correlation among densely packed particles can substantially change their single-scattering properties, thus making questionable the applicability of the independent scattering approximation in calculations of light scattering by planetary regoliths. The same problem arises in geophysics in light scattering computations for snow, frosts, and bare soil. In this paper, we use a dense-medium light-scattering theory based on the introduction of the static structure factor to calculate asymmetry parameters of the phase function for densely packed particles with real refractive indices 1.31 and 1.66, approximating water ice and soil particles, respectively, and imaginary refractive indices 0, 0.01, and 0.3. For sparsely distributed, independently scattering grains, the calculated asymmetry parameters are always positive and always larger than those for densely packed particles. For densely packed grains, the asymmetry parameters may be negative but only for radius-to-wavelength ratios from about 0.1 to about 0.4. With decreasing particle size, the calculated asymmetry parameters tend to zero independently of the compaction state. In the geometrical optics regime, the asymmetry parameters for densely packed scatterers are positive and very close to those for independently scattering grains. These results may have important implications for remote sensing of the Earth and solid planetary surfaces. In particular, it is demonstrated that negative asymmetry parameters derived with some approximate multiple-scattering theories may be physically irrelevant and can be the result of using an inaccurate bidirectional reflection function combined with the ill-conditionally of the inverse scattering problem.

Mishchenko, Michael I.↗

NASA NTRS2003

Bose Condensation at He-4 Interfaces

Path Integral Monte Carlo was used to calculate the Bose-Einstein condensate fraction at the surface of a helium film at T = 0:77 K, as a function of density. Moving from the center of the slab to the surface, the condensate fraction was found to initially increase with decreasing density to a maximum value of 0.9, before decreasing. Long wavelength density correlations were observed in the static structure factor at the surface of the slab. A surface dispersion relation was calculated from imaginary-time density-density correlations. Similar calculations of the superfluid density throughout He-4 droplets doped with linear impurities (HCN)(sub n) are presented. After deriving a local estimator for the superfluid density distribution, we find a decreased superfluid response in the first solvation layer. This effective normal fluid exhibits temperature dependence similar to that of a two-dimensional helium system.

Draeger, E. W.↗

NASA NTRS2013

Radiative Transfer Theory Verified by Controlled Laboratory Experiments

We report the results of high-accuracy controlled laboratory measurements of the Stokes reflection matrix for suspensions of submicrometer-sized latex particles in water and compare them with the results of a numerically exact computer solution of the vector radiative transfer equation (VRTE). The quantitative performance of the VRTE is monitored by increasing the volume packing density of the latex particles from 2 to 10. Our results indicate that the VRTE can be applied safely to random particulate media with packing densities up to 2. VRTE results for packing densities of the order of 5 should be taken with caution, whereas the polarized bidirectional reflectivity of suspensions with larger packing densities cannot be accurately predicted. We demonstrate that a simple modification of the phase matrix entering the VRTE based on the so-called static structure factor can be a promising remedy that deserves further examination.

Radiative transfer↗

DOE OSTI2021

Collective Nanoparticle Dynamics Associated with Bridging Network Formation in Model Polymer Nanocomposites

The addition of nanoparticles (NPs) to polymers is a powerful method to improve the mechanical and other properties of macromolecular materials. Such hybrid polymer–particle systems are also rich in fundamental soft matter physics. Among several factors contributing to mechanical reinforcement, a polymer-mediated NP network is considered to be the most important in polymer nanocomposites (PNCs). Here, we present an integrated experimental–theoretical study of the collective NP dynamics in model PNCs using X-ray photon correlation spectroscopy and microscopic statistical mechanics theory. Silica NPs dispersed in unentangled or entangled poly(2-vinylpyridine) matrices over a range of NP loadings are used. Static collective structure factors of the NP subsystems at temperatures above the bulk glass transition temperature reveal the formation of a network-like microstructure via polymer-mediated bridges at high NP loadings above the percolation threshold. The NP collective relaxation times are up to 3 orders of magnitude longer than the self-diffusion limit of isolated NPs and display a rich dependence with observation wavevector and NP loading. A mode-coupling theory dynamical analysis that incorporates the static polymer-mediated bridging structure and collective motions of NPs is performed. It captures well both the observed scattering wavevector and NP loading dependences of the collective NP dynamics in the unentangled polymer matrix, with modest quantitative deviations emerging for the entangled PNC samples. Here, we identify an unusual and weak temperature dependence of collective NP dynamics, in qualitative contrast with the mechanical response. Hence, the present study has revealed key aspects of the collective motions of NPs connected by polymer bridges in contact with a viscous adsorbing polymer medium and identifies some outstanding remaining challenges for the theoretical understanding of these complex soft materials.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Field-induced magnetic phases in a qubit Penrose quasicrystal

Unveiling the fundamental dynamics of naturally or artificially formed magnetic quasicrystals in the presence of an external magnetic field remains a difficult problem that may have implications for the design of information processing devices. By embedding a qubit magnetic Penrose quasicrystal into a quantum annealer, we were able to reproduce the formation of magnetic phases driven by specific physical parameter selections, allowing us to distinguish a wide range of frustrated magnetic configurations at the single-spin scale. In our experiments, we observe some spins dynamically activate, while others remain static, all within an average magnetization space defined by competing structural and magnetic degrees of freedom. Static spin structure factors reveal ferromagnetic and ferrimagnetic modulations that are compatible with a variety of spin textures. This research demonstrates that introducing structural aperiodicity in magnetic devices that exploit spin degeneracy in a single, richly intraconnected finite object can enable the engineering of quantum states in both the effective low-temperature and thermally excited regimes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS2013

Vibration Testing of Electrical Cables to Quantify Loads at Tie-Down Locations

The standard method for defining static equivalent structural load factors for components is based on Mile s equation. Unless test data is available, 5% critical damping is assumed for all components when calculating loads. Application of this method to electrical cable tie-down hardware often results in high loads, which often exceed the capability of typical tie-down options such as cable ties and P-clamps. Random vibration testing of electrical cables was used to better understand the factors that influence component loads: natural frequency, damping, and mass participation. An initial round of vibration testing successfully identified variables of interest, checked out the test fixture and instrumentation, and provided justification for removing some conservatism in the standard method. Additional testing is planned that will include a larger range of cable sizes for the most significant contributors to load as variables to further refine loads at cable tie-down points. Completed testing has provided justification to reduce loads at cable tie-downs by 45% with additional refinement based on measured cable natural frequencies.

Dutson, Joseph D.↗

DOE OSTI2026

Quantifying the phase diagram and Hamiltonian of S = 1/2 kagome antiferromagnets: bridging theory and experiment

Spin-1/2 kagome antiferromagnets are leading candidates for realizing quantum spin liquid (QSL) ground states. While QSL ground states are predicted for the pure Heisenberg model, understanding the robustness of the QSL to additional interactions that may be present in real materials is a forefront question in the field. Here we employ large-scale density-matrix renormalization group simulations to investigate the effects of next-nearest neighbor exchange couplings J 2 and Dzyaloshinskii-Moriya interactions D, which are relevant to understanding the prototypical kagome materials herbertsmithite and Zn-barlowite. By utilizing clusters as large as XC12 and extrapolating the results to the thermodynamic limit, we precisely delineate the scope of the QSL phase, which remains robust across an expanded parameter range of J 2 and D. Direct comparison of the simulated static and dynamic spin structure factors with inelastic neutron scattering reveals the parameter space of the Hamiltonians for herbertsmithite and Zn-barlowite, and, importantly, provides compelling evidence that both materials exist within the QSL phase. These results establish a powerful convergence of theory and experiment in this most elusive state of matter.

Jiang, Shengtao [SLAC National Accelerator Laborat↗

NASA NTRS2010

Utilizing In Situ Directional Hyperspectral Measurements to Validate Bio-Indicator Simulations for a Corn Crop Canopy

Two radiative transfer canopy models, SAIL and the two-layer Markov-Chain Canopy Reflectance Model (MCRM), were coupled with in situ leaf optical properties to simulate canopy-level spectral band ratio vegetation indices with the focus on the photochemical reflectance index in a cornfield. In situ hyperspectral measurements were made at both leaf and canopy levels. Leaf optical properties were obtained from both sunlit and shaded leaves. Canopy reflectance was acquired for eight different relative azimuth angles (psi) at three different view zenith angles (Theta (sub v)), and later used to validate model outputs. Field observations of photochemical reflectance index (PRI) for sunlit leaves exhibited lower values than shaded leaves, indicating higher light stress. Canopy PRI expressed obvious sensitivity to viewing geometry, as a function of both Theta (sub v) and psi . Overall, simulations from MCRM exhibited better agreements with in situ values than SAIL. When using only sunlit leaves as input, the MCRM-simulated PRI values showed satisfactory correlation and RMSE, as compared to in situ values. However, the performance of the MCRM model was significantly improved after defining a lower canopy layer comprised of shaded leaves beneath the upper sunlit leaf layer. Four other widely used band ratio vegetation indices were also studied and compared with the PRI results. MCRM simulations were able to generate satisfactory simulations for these other four indices when using only sunlit leaves as input; but unlike PRI, adding shaded leaves did not improve the performance of MCRM. These results support the hypothesis that the PRI is sensitive to physiological dynamics while the others detect static factors related to canopy structure. Sensitivity analysis was performed on MCRM in order to better understand the effects of structure related parameters on the PRI simulations. Leaf area index (LAI) showed the most significant impact on MCRM-simulated PRI among the parameters studied. This research shows the importance of hyperspectral and narrow band sensor studies, and especially the necessity of including the green wavelengths (e.g., 531 nm) on satellites proposing to monitor carbon dynamics of terrestrial ecosystems.

Cheng, Yen-Ben↗

DOE OSTI2024

Temperature-induced gradual polymorphic structural crossover in liquid indium, tin, and antimony

Temperature-induced polymorphic structural crossover in metallic liquid indium (In), tin (Sn), and antimony (Sb) is investigated by in situ high-energy x-ray diffraction and ab initio molecular dynamics simulations. The results demonstrate the existence of a temperature-induced reversible and gradual structural crossover in these three liquids, reflecting from both “static” structures, e.g., peak positions of the structure factor and pair distribution function, bond angle distribution, number of tetrahedra, cluster connection, free volume, and dynamical behaviors, including the relaxation time, diffusion coefficient, and non-Gaussian parameter. Further, the main difference from liquid In, Sn, to Sb is that not only the large-sized free volume but also the anharmonicity and the dynamical heterogeneity increase significantly with the appearance of strong covalent bonds. These findings will deepen the understanding of liquid structure and the liquid-liquid transition in metallic liquids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS2008

Static and Dynamic Structural Response of an Aircraft Wing with Damage Using Equivalent Plate Analysis

A process to generate an equivalent plate based on an optimization approach to predict the static and dynamic response of flight vehicle wing structures is proposed. Geometric-scale and frequency-scale factors are defined to construct an equivalent plate with any desired scale to use in simulation and wind tunnel experiments. It is shown that the stiffness and the displacements are scaled linearly with the geometric-scale factor, whereas the load is scaled as the square of the geometric-scale factor. The scaled stiffness of the reference flight vehicle is matched first to construct the equivalent plate. Then the frequency-scale factor is defined to scale the flight vehicle frequencies. The scaled flight vehicle frequencies are matched by placing arbitrary point masses along the equivalent plate geometry. Two simple stiffened-plate examples, one with damage and another without damage, were used to demonstrate the accuracy of the optimization procedure proposed. Geometric-scale factors ranging from 0.2 to 1.0 were used in the analyses. In both examples, the static and dynamic response of the reference stiffened-panel solution is matched accurately. The scaled equivalent plate predicted the first five frequencies of the stiffened panel very accurately. Finally, the proposed equivalent plate procedure was demonstrated in a more realistic typical aircraft wing structure. Two scale equivalent plate models were generated using the geometric-scale factors 1.0 and 0.2. Both equivalent plate models predicted the static response of the wing structure accurately. The equivalent plate models reproduced the first five frequencies of the wing structure accurately.

Krishnamurthy, T.↗

NASA NTRS1986

Effect of loading rate on dynamic fracture of reaction bonded silicon nitride

Wedge-loaded, modified tapered double cantilever beam (WL-MTDCB) specimens under impact loading were used to determine the room temperature dynamic fracture response of reaction bonded silicon nitride (RBSN). The crack extension history, with the exception of the terminal phase, was similar to that obtained under static loading. Like its static counterpart, a distinct crack acceleration phase, which was not observed in dynamic fracture of steel and brittle polymers, was noted. Unlike its static counterpart, the crack continued to propagate at nearly its terminal velocity under a low dynamic stress intensity factor during the terminal phase of crack propagation. These and previously obtained results for glass and RBSN show that dynamic crack arrest under a positive dynamic stress intensity factor is unlikely in static and impact loaded structural ceramics.

Liaw, B. M.↗

NASA NTRS2019

Investigating Additively Manufactured 17-4 PH for Structural Applications

17-4 is used regularly to manufacture force transducers particularly for wind tunnel testing. Such applications place demanding structural requirements on the transducers with static safety factors of 1.5 common and the potential for additional dynamic loads. Additive manufacturing (AM) of transducers is very appealing because of significant potential cost and time savings as well as increased design flexibility. This study looks at the processing of 17-4 powder using selective laser melting by two different facilities using their own best practices. Hot isostatic pressing (HIP) is used by both facilities as part of the thermomechanical processing following printing to explore whether it can improve the consistency of mechanical properties. Results revealed that HIP reduced average porosity of 17-4 parts and that the yield strength of parts following solutionization and aging met wrought material property targets. Strain to failure of one of the facilities parts was less than 5% compared to greater than 9% for the other facility. Inspection of failure surfaces revealed this discrepancy could be attributed to pores (2-4% area fraction) on the failure surface of the low ductility parts. Phase content varied between the facilities with one facility producing fully martensitic parts and the other containing some retained austenite. The phase content of the starting powder and a slower than air cooling rate following the final heat treatment above the austenite eutectoid temperature are likely sources of the retained austenite. Taken together these results suggest that the current state of the art in AM 17-4 processing is sufficient for many NASA force measurement applications, but that attention is required at each stage of processing to assure desired mechanical properties.

Burns, Devin E.↗

NASA NTRS1991

HITCAN for actively cooled hot-composite thermostructural analysis

A computer code, high temperature composite analyzer (HITCAN), was developed to analyze/design hot metal matrix composite structures. HITCAN is a general purpose code for predicting the global structural and local stress-strain response of multilayered (arbitrarily oriented) metal matrix structures both at the constituent (fiber, matrix, and interphase) and the structural level, including the fabrication process effects. The thermomechanical properties of the constituents are considered to be nonlinearly dependent on several parameters, including temperature, stress, and stress rate. The computational procedure employs an incremental iterative nonlinear approach utilizing a multifactor-interaction material behavior model, i.e., the material properties are expressed in terms of a product of several factors that affect the properties. HITCAN structural analysis capabilities (static, load stepping - a multistep static analysis with material properties updated at each step, modal, and buckling) for cooled hot structures are demonstrated through a specific example problem.

Chamis, C. C.↗