SEARCH · Search NASA
Results for “structure engineering”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Moiré band structure engineering using a twisted boron nitride substrate
Not provided.
Advancements in 2D MXene-based supercapacitor electrodes: synthesis, mechanisms, electronic structure engineering, flexible wearable energy storage for real-world applications, and future prospects
Supercapacitors are widely recognized as a favorable option for energy storage due to their higher power density compared to batteries, despite their lower energy density.
Engineering structural homogeneity and magnetotransport in strained Nd 2 Ir 2 O 7 films
The 5d pyrochlore iridate family (R 2 Ir 2 O 7 , where R is a rare earth ion) has garnered significant attention due to its topological properties, such as Weyl semimetallic phases and axion insulator. However, the investigation of these properties has been impeded by severe iridium loss during growth, which results in the formation of defects and impurities. Herein, we demonstrate a method for controlling impurities and defects in strained Nd 2 Ir 2 O 7 (NIO-227) films by compensating for iridium loss during growth. By increasing the amount of IrO 2 target ablated, we enhance the morphological quality and electrical transport properties of the fabricated films. Furthermore, our results show that the anomalous Hall effects of the films have a strong dependency on the amount of IrO 2 target ablated, which is attributed to the structural inhomogeneity in the NIO-227 films. Our work provides a way to control defects and impurities and would promote the investigation of topological phases in the family R 2 Ir 2 O 7 .
Imaging Bragg Edge Analysis TooLs for Engineering Structures (iBeatles)
The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL) provides pulsed neutrons with energies varying from epithermal to cold. In preparation for VENUS, the neutron imaging beamline to be located at beam port 10, we have performed a series of experiments focused on wavelength-dependent radiography and computed tomography for a broad range of applications, from materials science to biological tissues.One of the time-of-flight (TOF) techniques that is of interest to the scientific community is the 2-dimensional mapping of phases and average crystalline plane orientation in samples both ex-situ and during applied stresses such as tensile loading and heating. This technique is known as Bragg edgeimaging and relies on the identification of changes of transmission values, fitting of the edge to measure its displacement, and thus identify the shift in lattice parameter due to stresses. One of the challenges of TOF imaging measurements is the amount of data and the inability to observe Bragg edge shifts in real time during an experiment. Thus, we have been focusing on creating a Python-based interface that allows fast data processing and instantaneous mapping and fitting of the Bragg edges, and their evolution through time. Python libraries and Jupyter notebooks have been implemented to facilitate decision making during an experiment. The advantage of the notebooks is the possibility to guide an experiment as they can quickly process and display Bragg edge data. These notebooks can be used independently, or can be combined in a Python Graphical User Interface (GUI) tool called iBeatles. This interface permits visualization and fitting of the Bragg edges, and ultimately back-projects the fitting results onto the radiographs to display a strain map. Assuming data collection has sufficient statistics, the strain mapping analysis can be performed on a pixel-by-pixel basis. This development is a step forward toward a better user experience at the future VENUS beamline in terms of live feedback and productivity. Analysis that used to take days of switching between different applications can now be done in minutes within the
2022 Presentation for UCSD Structural Engineering Department [Slides]
Abstract not provided.
Quantum Dots on Silicon-on-Insulator (QD/SOI): Nanoscale Strain and Band Structure Engineering (Final Report)
As the project titles indicate, the work focused on Group IV nanomembranes (NMs), thin functional layers, and interfaces, all with one or more dimensions at the nanoscale. The primary focus was discovery driven fundamental science. This approach led to surprising new, unexpected results that ended up being patentable and creating commercial value, but that were also high-impact science. Our effort divided into several overlapping thrusts: 1) strain engineering of NMs, via both lattice strain and externally applied strain, 2) interfaces between crystalline semiconductor NMs and other 2D sheets that are stacked or grown on each other, and 3) charge transport (electronics and optoelectronics) in thin layers, sheets, and surfaces. We accomplish these goals via 1) fabrication of new or higher-quality materials using NM approaches, 2) growth of new combinations, or 3) transfer and stacking to create new composites. The range of materials included combinations of Si, Ge, graphene, and several III-V compounds. The work has foundations in both nano- and mesoscale science.
Issues for Digital Twins in the Context of Structural Engineering
Explore the source record for details and available documents.
Propagation of Random Microstructural Features for Reliability Estimates of Engineering Structures.
Abstract not provided.
Pipeline corrosion research at Sandia National Laboratories: From nanoscale science to structural engineering and piping applications.
Abstract not provided.
Pipeline corrosion research at Sandia National Laboratories: From nanoscale science to structural engineering and piping applications.
Abstract not provided.
Experimental and Computational Aspects of Ductile Failure for Structural Engineering Alloys.
Abstract not provided.
Mitigation of Boiling-Induced Thermal Degradation Using Microporous Nickel Inverse Opals Structures
Engineered microporous structures have received much attention in high-heat-flux electronics cooling due to their high thermal conductivity and permeability, and large surface area for heat transfer, but are susceptible to boiling-induced thermal degradation. Here, this study investigates the efficacy of nickel inverse opals (NiIOs) in mitigating structural degradation caused by corrosion-assisted erosion during pool boiling with water as the working fluid. First, we compared the reliability of NiIOs to copper inverse opals (CuIOs) for a 3-day pool boiling test at constant heat flux. The NiIOs demonstrated superior resistance to thermal degradation due to their inherent corrosion resistance and mechanical strength. Subsequently, we conducted a more controlled experiment to show the effect of heat flux on the degradation of the NiIOs while excluding the effect of temperature variations. Pool boiling tests of 20-μm-thickness NiIOs covering an area of ∼11 × 11 mm 2 with a 2.5 × 2.5 mm 2 heater at the center were conducted at heat flux levels of 20%, 40%, and 60% of the critical heat flux (CHF) for 3 days. The NiIOs subjected to heat flux levels of 20% and 40% CHF showed minimal degradation, while the sample subjected to 60% CHF showed erosion on the top surface due to higher bubble formation and departure rate. These results show the potential of NiIOs as a promising solution for long-term thermal management in high-power electronic devices, although design considerations for maximum allowable heat flux are necessary for reliable operation.
Detonation Structure in Ethylene/Air-Based Non-Premixed Rotating Detonation Engine
Not provided.
Regulation of Cathode Mass and Charge Transfer by Structural 3D Engineering for Protonic Ceramic Fuel Cell at 400 °C
Abstract Lowering the operating temperature (ideally below 400 °C) for solid oxide fuel cell (SOFC) technology deployment has been an important transition that introduces the benefit of reduced operational costs and system durability. However, the key technical issue limiting the transition is the sluggish cathodic performance, namely the oxygen reduction reaction (ORR) rate of the conventional sponge‐like cathode dramatically drops as the temperature reduces. In this paper, 3D engineering of a cathode is conducted on a protonic ceramic fuel cell to obtain an enhanced ORR between 400 and 600 °C. Compared with a cell using a conventional sponge‐like cathode, 3D engineering improves the cathode ORR by 41% at 400 °C with a peak power density of 0.410 W cm −2 . A phase field simulation is applied to assist the engineering by understanding the competition between the cathode mass and charge transfer with different cathode porosities. The results show that structural engineering of existing well‐developed cathodes is a simple and effective method to promote cathode ORR for low temperature SOFC by regulating the mass and charge transfer.
Enhanced piezo-response of mixed-cation copper perovskites with Cl/Br halide engineering
Structural modulation of (Cs/MA) mixed-cation copper perovskite via (Cl/Br) mixed-halide engineering led to enhancement of the piezoelectric response.
Toward engineering lattice structures with the material point method (MPM)
This study examines the potential of two variants of the material point method—the generalized interpolation material point (GIMP) and dual domain material point (DDMP) methods—in developing a robust computational framework for engineering lattice structures under different loading conditions. The study begins with assessing the ability of the two methods in predicting elastic buckling phenomena using column geometries with and without initial geometric imperfections. The results indicate that both methods effectively capture buckling phenomena when initial geometric imperfections are introduced. After this verification step, we create several models of tetrahedral lattice structures with varying strut diameter and orientation and subject them to quasi-static loading. We then validate the numerical results using laboratory test results. The results show that, while both methods accurately predict load–displacement curves in the pre-buckling regime, their predictive capabilities diminish in the post-buckling regime. Through visual comparison between the numerical and experimental deformed shapes, it appears that the discrepancies between model and experimental results are attributed to initial geometric imperfections in the lattices that occurred during 3D printing. We then establish a second set of lattice models where different types of initial geometric imperfections are considered. The results from these models show that imperfections have a negligible influence in the pre-buckling regime but affect the behavior considerably in the post-buckling regime. As a final step in this work, we subject the lattice models to impact loading and employ hypothetical soft and stiff materials. These results show that the lattice stiffness, which depends on material stiffness, strut diameter, and orientation, significantly influences the ability of a lattice structure to resist impact. In particular, we find that a stiffer lattice (i.e., one made with a stiff material and thicker struts) is capable of absorbing more energy than a softer one during impact. Although material nonlinearities, inelasticity, and detailed contact formulations are not considered in this study, the findings obtained herein lay the groundwork for engineering lattice structures under extreme loading conditions through a simulation-driven framework based on particle-based methods.