Search NASA⌕ Search

SEARCH · Search NASA

Results for “structured waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Advanced accelerator and mm-wave structure research at LANL

This document outlines acceleration projects and mm-wave structure research performed at LANL. The motivation for PBG research is described first, with reference to couplers for superconducting accelerators and structures for room-temperature accelerators and W-band TWTs. These topics are then taken up in greater detail: PBG structures and the MIT PBG accelerator; SRF PBG cavities at LANL; X-band PBG cavities at LANL; and W-band PBG TWT at LANL. The presentation concludes by describing other advanced accelerator projects: beam shaping with an Emittance Exchanger, diamond field emitter array cathodes, and additive manufacturing of novel accelerator structures.

43 PARTICLE ACCELERATORS↗

Dispersive characteristics and longitudinal resonance properties in a relativistic backward wave oscillator with the coaxial arbitrary-profile slow-wave structure

The method for calculating the dispersion relations of the slow-wave structures (SWSs) with arbitrary geometrical structures is studied in detail by using the Fourier series expansion. In addition, dispersive characteristics and longitudinal resonance properties of the SWSs with the cosinusoidal, trapezoidal, and rectangular corrugations are analyzed by numerical calculation. Based on the above discussion, a comparison on an L-band coaxial relativistic backward wave oscillator (BWO) and an L-band coaxial BWO with a coaxial extractor is investigated in detail with particle-in-cell KARAT code (V. P. Tarakanov, Berkeley Research Associates, Inc., 1992). Furthermore, experiments are carried out at the TORCH-01 accelerator under the low guiding magnetic field. At diode voltage of 647 kV, beam current of 9.3 kA, and guiding magnetic field strength of 0.75 T, the microwave is generated with power of 1.07 GW, mode of TM{sub 01}, and frequency of 1.61 GHz. That is the first experimental report of the L-band BWO.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design and performance of optimal detectors for guided wave structural health monitoring

Ultrasonic guided wave measurements in a long term structural health monitoring system are affected by measurement noise, environmental conditions, transducer aging and malfunction. This results in measurement variability which affects detection performance, especially in complex structures where baseline data comparison is required. This paper derives the optimal detector structure, within the framework of detection theory, where a guided wave signal at the sensor is represented by a single feature value that can be used for comparison with a threshold. Three different types of detectors are derived depending on the underlying structure’s complexity: (i) Simple structures where defect reflections can be identified without the need for baseline data; (ii) Simple structures that require baseline data due to overlap of defect scatter with scatter from structural features; (iii) Complex structure with dense structural features that require baseline data. The detectors are derived by modeling the effects of variabilities and uncertainties as random processes. Analytical solutions for the performance of detectors in terms of the probability of detection and false alarm are derived. A finite element model is used to generate guided wave signals and the performance results of a Monte-Carlo simulation are compared with the theoretical performance. initial results demonstrate that the problems of signal complexity and environmental variability can in fact be exploited to improve detection performance.

60 APPLIED LIFE SCIENCES↗

Enhanced traveling wave amplification of co-planar slow wave structure by extended phase-matching

The electron beam co-propagating with slow waves in a staggered double grating array (SDGA) efficiently amplifies millimeter and sub-millimeter waves over a wide spectrum. Our theoretical and numerical analyses show that the power amplification in the fundamental passband is enhanced by the extended beam-wave phase-matching. Particle-in-cell simulations on the SDGA slow wave structure, designed with 10.4 keV and 50–100 mA sheet beam, indicate that maintaining beam-wave synchronization along the entire length of the circuit improves the gain by 7.3% leading to a total gain of 28 dB, corresponding to 62 W saturated power at the middle of operating band, and a 3-dB bandwidth of 7 GHz with 10.5% at V-band (73.5 GHz center frequency) with saturated peak power reaching 80 W and 28 dB at 71 GHz. These results also show a reasonably good agreement with analytic calculations based on Pierce small signal gain theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A 0.14 THz relativistic coaxial overmoded surface wave oscillator with metamaterial slow wave structure

This paper presents a new kind of device for generating the high power terahertz wave by using a coaxial overmoded surface wave oscillator with metamaterial slow wave structure (SWS). A metallic metamaterial SWS is used to avoid the damage of the device driven by a high-voltage electron beam pulse. The overmoded structure is adopted to make it much easy to fabricate and assemble the whole device. The coaxial structure is used to suppress the mode competition in the overmoded device. Parameters of an electron beam and geometric structure are provided. Particle-in-cell simulation results show that the high power terahertz wave at the frequency of 0.14 THz is generated with the output power 255 MW and conversion efficiency about 21.3%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical discharge with absorption of repetitive CO{sub 2} laser pulses in supersonic air flow: wave structure and condition of a quasi-steady state

We report a study of the wave structure formed by an optical discharge plasma upon the absorption of repetitively pulsed CO{sub 2} laser radiation in a supersonic (M = 1.36) air flow. Experimental data are presented on the configuration of the head shock wave and the geometry and characteristic dimensions of breakdown regions behind a laser plasma pulsating in the flow at a frequency of up to 150 kHz. The data are compared to calculation in a point explosion model with allowance for counterpressure, which makes it possible to identify the relationship between laser radiation and supersonic flow parameters that ensures quasisteady- state energy delivery and is necessary for extending the possibilities of controlling the structure of supersonic flows. (interaction of laser radiation with matter)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimization of relativistic backward wave oscillator with non-uniform slow wave structure and a resonant reflector

This letter optimizes synchronously 18 parameters of a relativistic backward wave oscillator with non-uniform slow wave structure (SWS) and a resonant reflector by using the parallel genetic algorithms and particle-in-cell simulation. The optimization results show that the generation efficiency of microwave from the electron beam has increased 32% compared to that of the original device. After optimization, the electromagnetic mode propagating in the resonant changes from the original TM{sub 020} mode of reflector to higher-order TM{sub 021} mode, which has a high reflection coefficient in a broader frequency range than that of the former. The modulation of current inside the optimized device is much deeper than that in the original one. The product of the electric field and current is defined. Observing this product, it is found that the interaction of the electron beam with the electromagnetic wave in the optimized device is much stronger than that in the original device, and at the rear part of SWS of the optimized device, the electron beam dominantly gives out the energy to the electromagnetic wave, leading to the higher generation efficiency of microwave than that of the original device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Slow wave structures using twisted waveguides for charged particle applications

A rapidly twisted electromagnetic accelerating structure includes a waveguide body having a central axis, one or more helical channels defined by the body and disposed around a substantially linear central axial channel, with central portions of the helical channels merging with the linear central axial channel. The structure propagates electromagnetic waves in the helical channels which support particle beam acceleration in the central axial channel at a phase velocity equal to or slower than the speed of light in free space. Since there is no variation in the shape of the transversal cross-section along the axis of the structure, inexpensive mechanical fabrication processes can be used to form the structure, such as extrusion, casting or injection molding. Also, because the field and frequency of the resonant mode depend on the whole structure rather than on dimensional tolerances of individual cells, no tuning of individual cells is needed. Accordingly, the overall operating frequency may be varied with a tuning/phase shifting device located outside the resonant waveguide structure.

43 PARTICLE ACCELERATORS↗

All-metal metamaterial slow-wave structure for high-power sources with high efficiency

In this paper, we have proposed a metamaterial (MTM) which is suitable for the compact high-power vacuum electron devices. For example, an S-band slow-wave structure (SWS) based on the all-metal MTMs has been studied by both simulation and experiment. The results show that this MTM SWS is very helpful to miniaturize the high-power vacuum electron devices and largely improve the output power and the electronic efficiency. The simulation model of an S-band MTM backward wave oscillator (BWO) is built, and the particle-in-cell simulated results are presented here: a 2.454 GHz signal is generated and its peak output power is 4.0 MW with a higher electronic efficiency of 31.5% relative to the conventional BWOs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Damping Effect Studies for X-band Normal Conducting High Gradient Standing Wave Structures

The Multi-TeV colliders should have the capability to accelerate low emittance beam with high rf efficiency, X-band normal conducting high gradient accelerating structure is one of the promising candidate. However, the long range transverse wake field which can cause beam emittance dilution is one of the critical issues. We examined effectiveness of dipole mode damping in three kinds of X-band, {pi}-mode standing wave structures at 11.424GHz with no detuning considered. They represent three damping schemes: damping with cylindrical iris slot, damping with choke cavity and damping with waveguide coupler. We try to reduce external Q factor below 20 in the first two dipole bands, which usually have very high (R{sub T}/Q){sub T}. The effect of damping on the acceleration mode is also discussed.

43 PARTICLE ACCELERATORS↗

Analysis of the Detonation Wave Structure in a Linearized Rotating Detonation Engine

The rotating detonation engine is increasingly favored as a viable pressure gain combustion technology for both propulsion and power generation applications. Practical designs involve the discrete injection of fuel and air, which then partially mix to produce the reactive mixture that is processed by a continuously moving detonation wave within the detonation chamber. One of the fundamental challenges in the successful operation of rotating detonation engines is the design of a robust fuel-oxidizer injection system. To minimize pressure losses while ensuring efficient mixing that promotes stable detonation, the injection has to satisfy many different constraints. In this work, the impact of discrete injection on wave propagation is studied in an effort to understand the impact of fuel stratification on detonation stability. To this end, the structure of the detonation wave within a linearized rotating detonation engine with fully premixed hydrogen-air and hydrogen-oxygen injection at various equivalence ratios is analyzed. The direct numerical simulation of the linearized model detonation engine is compared with experimental results, and wave behavior is correlated to the wave structure and flow turbulence. As a result, the flow properties and chemical composition of the gases across the detonation wave are studied to examine the characteristics of the reaction zone.

42 ENGINEERING↗

Computational and theoretical analysis of weak and strong transverse-wave structures in gaseous detonations

Two-dimensional simulation results are presented that capture at great detail the temporal evolution of Mach reflection triple point sub-structures intrinsic to gaseous detonation waves. The observed patterns are classified by shock polar analysis for realistic, thermally perfect but nonreactive gases. A diagram of the transition boundaries between possible Mach reflection structures is constructed and found to be in good agreement with the computational results.

99 GENERAL AND MISCELLANEOUS↗

RF Choke for Standing Wave Structures and Flanges

SLAC participates in the U.S. High Gradient collaboration whose charter includes basic studies of rf breakdown properties in accelerating structures. These studies include experiments with different materials and construction methods for single cell standing wave accelerating structures. The most commonly used method of joining cells of such structures is the high temperature bonding and/or brazing in hydrogen and/or vacuum. These high temperature processes may not be suitable for some of the new materials that are under consideration. We propose to build structures from cells with an rf choke, taking the cell-to-cell junction out of the electromagnetic field region. These cells may be clamped together in a vacuum enclosure, the choke joint ensuring continuity of rf currents. Next, we propose a structure with a choke joint in a high gradient cell and a view port which may allow us microscopic, in-situ observation of the metal surface during high power tests. And third, we describe the design of a TM01 choke flange for these structures.

08 HYDROGEN↗

Electrostatic wave structures in a magnetized superthermal plasma with two-temperature electrons

The linear and nonlinear excitation of arbitrary amplitude ion-acoustic (IA) solitary waves in a magnetized plasma comprising two-temperature electrons and cold ions are studied. The oblique propagation properties of two possible modes (in the linear regime) are investigated. It is found that the electron superthermality reduces the phase velocities of both modes, whereas obliqueness leads to an increase in the separation between two modes. In the nonlinear regime, an energy-like equation describes the evolution of IA solitary waves in the present model. The combined effects of the electron superthermality, magnitude of magnetic field, obliqueness and electron population are incorporated in the study of the existence domain of solitary waves and the soliton characteristics. It is shown that the small values of the hot electron population shift the permitted interval of Mach number to the lower values. Both compressive and rarefactive solitary structures are found to exist in the presence of two temperature electrons. The present investigation contributes to the physics of electrostatic wave structures in Saturn's magnetosphere in which two temperature electrons with kappa distribution exist.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Parallel Adaptive Simulation of Weak and Strong Transverse-Wave Structures in H2-O2 Detonations

Two- and three-dimensional simulation results are presented that investigate at great detail the temporal evolution of Mach reflection sub-structure patterns intrinsic to gaseous detonation waves. High local resolution is achieved by utilizing a distributed memory parallel shock-capturing finite volume code that employs block-structured dynamic mesh adaptation. The computational approach, the implemented parallelization strategy, and the software design are discussed.

08 HYDROGEN↗

PBG-slab Embedded Traveling Wave Structure for Planar Beam Accelerator Application

The oversized traveling wave (TE10-mode) channel integrated with the photonic-band-gap (PBG) slab arrays have been investigated for planar beam accelerator application. Simulation analysis showed that the slab arrays allow only the PBG-modes ( 5-6 GHz) to propagate with ~ 2 dB of insertion loss, corresponding to ~ 1.14 dB/cm attenuation, which thereby effectively suppresses trapped non-PBG modes down to ~ -14.3 dB/cm. It will enable monochromatic propagation of fundamental acceleration modes al ong the heavily over-moded planar waveguide without anomalous excitation of unstable trapped HOMs. The saturated maximum field gradients of the accelerating structure have been analyzed with respect to operational frequency bands corresponding to structur al sizes. The field gradient of the guided PBG-mode has been investigated with finite-integral-method (FIM) simulations at W-band. This mode-filter could be utilized for HOM dampers in high aspect ratio (HAR) planar beam accelerators. An experimental test is currently under consideration.

43 PARTICLE ACCELERATORS↗

The Effect of Fuel Stratification on the Detonation Wave Structure

Rotating detonation engines are a promising technology for stationary and mobile power generation applications. A form of pressure gain combustion, detonation engines allow for the recovery of the gas pressure lost in traditional constant pressure combustion and the fuel and oxidizer injection schemes. The rotating detonation engine annulus features a complex distribution of fuel-oxidizer due to the turbulent mixing of the fuel and oxidizer streams, with regions of varying equivalence ratio arranged in irregular patches within the domain. The primary objective of this work is to gain an understanding of the interaction between the detonation wave and the fuel-oxidizer mixture inhomogeneity. Past studies have found that inhomogeneities result in irregular detonation cell structures and affect wave propagation. To this end, the influence of a stratified fuel-oxidizer mixture on the behavior and structure of the detonation wave is simulated through a direct numerical simulation approach. Three different fuel-oxidizer stratification length scales are evaluated, and their effects on the properties of the detonation wave are discussed.

Prakash, Supraj↗

Spatial localization of resistive drift wave structure in tokamak edge plasmas with an embedded magnetic island

Resistive drift wave instability is investigated numerically in tokamak edge plasma confined by sheared slab magnetic field geometry with an embedded magnetic island. The focus is on the structural characteristics of eigenmode inside the island, where the density profile tends to be flattened. A transition of the dominant eigenmode occurs around a critical island width w{sub c}. For thin islands with a width below w{sub c}, two global long wavelength eigenmodes with approximately the same growth rate but different eigenfrequency are excited, which are stabilized by the magnetic island through two-dimensional mode coupling in both x and y (corresponding to radial and poloidal in tokamak) directions. On the other hand, a short wavelength eigenmode, which is destabilized by thick islands with a width above w{sub c}, dominates the edge fluctuation, showing a prominent structural localization in the region between the X-point and the O-point of the magnetic island. The main destabilization mechanism is identified as the mode coupling in the y direction, which is similar to the so-called toroidal coupling in tokamak plasmas. These three eigenmodes may coexist in the drift wave fluctuation for the island with a width around w{sub c}. It is demonstrated that the structural localization results mainly from the quasilinear flattening of density profile inside the magnetic island.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗