Search NASA⌕ Search

SEARCH · Search NASA

Results for “struvite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

28 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Investigation of aluminum nitrate as a set retarder of magnesium potassium phosphate cement: Mechanisms involved in diluted suspension

In this study, the influence of aluminum nitrate on the hydration process of magnesium potassium phosphate (MKP) cement was investigated experimentally and through thermodynamic modelling using diluted systems with Mg/PO{sub 4} molar ratio and water-to-cement ratio of 1 and 100 respectively. Three processes contributed to retard cement hydration: the acidic nature of aluminum nitrate which reduced the initial pH of the solution by two units, the early precipitation of a taranakite-like amorphous potassium aluminophosphate, which reduced the aqueous phosphate and potassium concentrations, and a salt effect due to the presence of soluble nitrate. Precipitation of potassium-containing magnesium phosphate hydrates, like Mg{sub 2}KH(PO{sub 4}){sub 2}⋅15H{sub 2}O and K-struvite, was prohibited, whereas precipitation of newberyite and cattiite was delayed. Furthermore, the modelled phase development with ongoing cement hydration agreed rather well with the experimental findings.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Hydrothermal liquefaction of wastewater-grown algae to produce synthetic aviation fuel: A combined experimental study and techno-economic assessment

Large-scale algae farms may someday become a consistent source of biomass feedstock for biofuels. Near-term supplies of algal biomass are available at certain water resource recovery facilities as algae cultivation is used as a method for nutrient recovery from specific effluent streams. Algae grown as a service shifts the value to the service rather than its sole use as a feedstock, which could enable the provision of algal biomass at low to no cost to biofuel producers. Hydrothermal liquefaction (HTL) can readily upgrade wet feedstock slurries, such as algae, to produce a carbon-enriched biocrude. The HTL biocrude can be hydrotreated and distilled, producing a variety of distillate fuels, including synthetic aviation fuel (SAF). We present a pathway, showing the experimental production of SAF from wastewater-grown algae via HTL, along with a techno-economic assessment to identify opportunities for process improvements. Critical quality attributes of the SAF, such as density, viscosity, surface tension, and freeze point, were estimated within the expected fuel experience ranges when compared against petroleum jet fuel. The average minimum fuel selling price of fuels from wastewater-grown algae for breakeven economics was $\$9.04$ per gasoline gallon equivalent (GGE). The sale of co-products such as struvite fertilizers and cement additives can add revenue to reduce the net cost. Ultimately, the selling price is influenced by the scale of the HTL processing facility. Adjusting estimations in the process scale, algae yield, and capital cost estimation can lower the price to $\$6.51$/GGE or raise it to $13.07/GGE.

Biofuels↗
DOE OSTI2026

Electrochemical Nutrient Recovery for the Food–Energy–Water Nexus at Municipal Wastewater Facilities: Multivariate Analyses of Seasonal Sampling and Reactor Performance

Digester-equipped municipal wastewater facilities generate recycle streams with high nutrient loads that increase energy consumption and can cause environmental pollution. The reduction of these loads through electrochemical nutrient recovery (ENR) could enhance the food–energy–water nexus by producing fertilizer (struvite). This study investigated the recovery process through a 1 year sampling of recycle streams and the implementation of nutrient recovery. Time series analyses showed that P (as orthophosphate) concentration was time-variant in digester effluent streams, while N (as ammonia) concentration was time-variant in only the aerobic system. Furthermore, these two nutrient concentrations did not correlate in any of the recycle streams. Subsequent multivariate screening analyses identified anode type, NH 4 + concentration, cathodic potential, P concentration, and temperature as most significant for ENR. Finally, the optimum conditions of cathodic potential, anode area-to-volume ratio, and temperature applied to a real recycle stream resulted in 95% P recovery with 0.03 kWh/kg P. This energy consumption is significantly lower than process energy for conventional P fertilizers (1.1 kWh/kg P) and chemical recovery processes at scale (1.7–12.9 kWh/kg P). Overall, this study recommended specific process controls for nutrient recovery, expanded the variables evaluated for ENR, and demonstrated the ability to significantly impact energy demand associated with P-based fertilizers.

36 MATERIALS SCIENCE↗
NASA NTRS1973

The effect of Mg/2+/ and Ca/2+/ on urea-catalyzed phosphorylation reactions

The effect of Mg(2+) and Ca(2+) on phosphorylation reactions catalyzed by urea is investigated, showing that Mg(2+) improves markedly the yield of products containing pyrophosphate bonds. Yields of up to 25% of uridine diphosphate can be obtained with struvite at temperatures as low as 65 C.

Handschuk, G. J.↗
NASA NTRS1991

Biologically controlled minerals as potential indicators of life

Minerals can be produced and deposited either by abiotic or biologic means. Regardless of their origin, mineral crystals reflect the environment conditions (e.g., temperature, pressure, chemical composition, and redox potential) present during crystal formation. Biologically-produced mineral crystals are grown or reworked under the control of their host organism and reflect an environment different from the abiotic environment. In addition, minerals of either biologic or abiotic origin have great longevities. For these reasons, biologically produced minerals have been proposed as biomarkers. Biomarkers are key morphological, chemical, and isotopic signatures of living systems that can be used to determine if life processes have occurred. Studies of biologically controlled minerals produced by the protist, Paramecium tetraurelia, were initiated since techniques have already been developed to culture them and isolate their crystalline material, and methods are already in place to analyze this material. Two direct crystalline phases were identified. One phase, whose chemical composition is high in Mg, was identified as struvite. The second phase, whose chemical composition is high in Ca, has not been previously found occurring naturally and may be considered a newly discovered material. Analyses are underway to determine the characteristics of these minerals in order to compare them with characteristics of these minerals in order to compare them with characteristics of minerals formed abiotically, but with the same chemical composition.

Schwartz, D. E.↗
NASA NTRS1996

Renal-Stone Risk Assessment During Space Shuttle Flights

The metabolic and environmental factors influencing renal stone formation before, during, and after Space Shuttle flights were assessed. We established the contributing roles of dietary factors in relationship to the urinary risk factors associated with renal stone formation. 24-hr urine samples were collected prior to, during space flight, and following landing. Urinary factors associated with renal stone formation were analyzed and the relative urinary supersaturation ratios of calcium oxalate, calcium phosphate (brushite), sodium urate, struvite and uric acid were calculated. Food and fluid consumption was recorded for a 48-hr period ending with the urine collection. Urinary composition changed during flight to favor the crystallization of stone-forming salts. Factors that contributed to increased potential for stone formation during space flight were significant reductions in urinary pH and increases in urinary calcium. Urinary output and citrate, a potent inhibitor of calcium-containing stones, were slightly reduced during space flight. Dietary intakes were significantly reduced for a number of variables, including fluid, energy, protein, potassium, phosphorus and magnesium. This is the first in-flight characterization of the renal stone forming potential in astronauts. With the examination of urinary components and nutritional factors, it was possible to determine the factors that contributed to increased risk or protected from risk. In spite of the protective components, the negative contributions to renal stone risk predominated and resulted in a urinary environment that favored the supersaturation of stone-forming salts. The importance of the hypercalciuria was noted since renal excretion was high relative to the intake.

Whitson, Peggy A.↗
NASA NTRS2001

The risk of renal stone formation during and after long duration space flight

BACKGROUND: The formation of a renal stone during space flight may have serious negative effects on the health of the crewmember and the success of the mission. Urinary biochemical factors and the influence of dietary factors associated with renal stone development were assessed during long duration Mir Space Station missions. METHODS: Twenty-four-hour urine samples were collected prior to, during and following long duration space flight. The relative urinary supersaturation of calcium oxalate, calcium phosphate (brushite), sodium urate, struvite and uric acid were determined. RESULTS: Changes in the urinary biochemistry of crewmembers during long duration spaceflight demonstrated increases in the supersaturation of the stone-forming salts. In-flight hypercalciuria was evident in a number of individual crewmembers and 24-hour dietary fluid intake and urine volume were significantly lower. During flight, there was a significant increase in brushite supersaturation. CONCLUSIONS: These data suggest acute effects of space flight and postflight changes in the urinary biochemistry favoring increased crystallization in the urine. The effects of dietary intake, especially fluid intake, may have a significant impact on the potential for renal stone formation. Efforts are now underway to assess the efficacy of a countermeasure to mitigate the increased risk.

manned↗
NASA NTRS1997

Renal stone risk assessment during Space Shuttle flights

PURPOSE: The metabolic and environmental factors influencing renal stone formation before, during, and after Space Shuttle flights were assessed. We established the contributing roles of dietary factors in relationship to the urinary risk factors associated with renal stone formation. MATERIALS AND METHODS: 24-hr. urine samples were collected prior to, during space flight, and following landing. Urinary and dietary factors associated with renal stone formation were analyzed and the relative urinary supersaturation of calcium oxalate, calcium phosphate (brushite), sodium urate, struvite and uric acid were calculated. RESULTS: Urinary composition changed during flight to favor the crystallization of calcium-forming salts. Factors that contributed to increased potential for stone formation during space flight were significant reductions in urinary pH and increases in urinary calcium. Urinary output and citrate, a potent inhibitor of calcium-containing stones, were slightly reduced during space flight. Dietary intakes were significantly reduced for a number of variables, including fluid, energy, protein, potassium, phosphorus and magnesium. CONCLUSIONS: This is the first in-flight characterization of the renal stone forming potential in astronauts. With the examination of urinary components and nutritional factors, it was possible to determine the factors that contributed to increased risk or protected from risk. In spite of the protective components, the negative contributions to renal stone risk predominated and resulted in a urinary environment that favored the supersaturation of stone-forming salts. Dietary and pharmacologic therapies need to be assessed to minimize the potential for renal stone formation in astronauts during/after space flight.

STS Shuttle Project↗
NASA NTRS2012

Strategies for Stabilizing Nitrogenous Compounds in ECLSS Wastewater: Top-Down System Design and Unit Operation Selection with Focus on Bio-Regenerative Processes for Short and Long Term Scenarios

Water recycling and eventual nutrient recovery is crucial for surviving in or past low earth orbit. New approaches and syste.m architecture considerations need to be addressed to meet current and future system requirements. This paper proposes a flexible system architecture that breaks down pretreatment , steps into discrete areas where multiple unit operations can be considered. An overview focusing on the urea and ammonia conversion steps allows an analysis on each process's strengths and weaknesses and synergy with upstream and downstream processing. Process technologies to be covered include chemical pretreatment, biological urea hydrolysis, chemical urea hydrolysis, combined nitrification-denitrification, nitrate nitrification, anammox denitrification, and regenerative ammonia absorption through struvite formation. Biological processes are considered mainly for their ability to both maximize water recovery and to produce nutrients for future plant systems. Unit operations can be considered for traditional equivalent system mass requirements in the near term or what they can provide downstream in the form of usable chemicals or nutrients for the long term closed-loop ecological control and life support system. Optimally this would allow a system to meet the former but to support the latter without major modification.

Lunn, Griffin M.↗
DOE OSTI2023

Considerations for Electrochemical Phosphorus Precipitation: A Figures of Merit Approach

Electrochemical phosphorus precipitation (EPP) from wastewater is a promising emerging technology for recovering valuable nutrients. While there are significant advantages of EPP compared to traditional phosphorus recovery, large gaps in reported performance exist between EPP methods and between EPP and industrial methods. Herein we discuss Figures of Merit (FOM) to normalize and report EPP performance at low-to-intermediate technology readiness levels (TRLs). Here, the appropriate use of FOM in electrochemical engineering enables better comparison between technologies, enhanced understanding of electrochemical and mass transport phenomena, and faster scale-up and adoption of nascent technologies.¬ FOM specific to EPP are discussed along with important considerations and adaptations from traditional electrochemical engineering FOM. Importantly, this FOM approach may be adapted for many different electrochemical processes and technologies, aiding in the push toward and adoption of electrification in chemical processing.

42 ENGINEERING↗