Search NASA⌕ Search

SEARCH · Search NASA

Results for “subsonic flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

34 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Performance Analysis of High-Temperature Heat Pumps with Two-Phase Ejectors

A two-phase ejector recovers the energy in the refrigerant cycles’ throttling process, improving the coefficient of performance (COP) of high-temperature heat pumps (HTHPs). This study investigated the effects of the mixing pressure on the performance of two-phase ejectors and ejector-assisted HTHPs. A 1D theoretical model of a two-phase ejector was built to predict the internal fluid dynamics and evaluate ejector performance. A thermodynamic model of an ejector-assisted HTHP was built to evaluate the COP of HTHPs and the volumetric heating capacity of low-global warming potential refrigerants. The results demonstrate that an optimum mixing pressure in a two-phase ejector provides the best performance of a two-phase ejector and ejector-assisted HTHP. The optimum mixing pressure was slightly lower than the evaporation pressure. At this pressure, the two-phase flow in the ejector was subsonic. For ejector-assisted HTHPs using low–global warming potential refrigerants at a sink temperature of 120°C, temperature lift of 40°C, and subcooling of 10°C, a two-phase ejector has an average ejector efficiency of 0.334, and the COP and volumetric heating capacity were improved by 7.2% and 7.3%, respectively.

Wang, Pengtao↗
DOE OSTI2024

Turbulence, Waves, and Taylor’s Hypothesis for Heliosheath Observations

Magnetic field fluctuations measured in the heliosheath by the Voyager spacecraft are often characterized as compressible, as indicated by a strong fluctuating component parallel to the mean magnetic field. However, the interpretation of the turbulence data faces the caveat that the standard Taylor’s hypothesis is invalid because the solar wind flow velocity in the heliosheath becomes subsonic and slower than the fast magnetosonic speed, given the contributions from hot pickup ions (PUIs) in the heliosheath. We attempt to overcome this caveat by introducing a 4D frequency-wavenumber spectral modeling of turbulence, which is essentially a decomposition of different wave modes following their respective dispersion relations. Isotropic Alfvén and fast mode turbulence are considered to represent the heliosheath fluctuations. We also include two dispersive fast wave modes derived from a three-fluid theory. We find that (1) magnetic fluctuations in the inner heliosheath are less compressible than previously thought, an isotropic turbulence spectral model with about 25% in compressible fluctuation power is consistent with the observed magnetic compressibility in the heliosheath; (2) the hot PUI component and the relatively cold solar wind ions induce two dispersive fast magnetosonic wave branches in the perpendicular propagation limit, PUI fast wave may account for the spectral bump near the proton gyrofrequency in the observable spectrum; (3) it is possible that the turbulence wavenumber spectrum is not Kolmogorov-like although the observed frequency spectrum has a −5/3 power-law index, depending on the partitioning of power among the various wave modes, and this partitioning may change with wavenumber.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Airfoil leading edge blowing to control bow shock waves

Abstract This manuscript presents a detailed characterization of active control of bow shock waves via leading edge injection, including subsonic coolant ejection and the appearance of Coanda effects. The flow phenomena occurring at steady and pulsating flow injection regimes were analyzed using steady and unsteady two-dimensional Reynolds-Averaged Navier Stokes, leading to a precise evaluation of the thermal load and drag reductions. Steady supersonic injection yields the largest abatement in thermal load and aerodynamic drag, while subsonic or fluctuating ones can also provide significant improvements at reduced cooling mass flow rates. Furthermore, a Coanda effect, causing a non-symmetric flow topology, was observed and analyzed for reduced injection port size. This Coanda effect is due to the sudden expansion happening from the injection port to the main flow and it causes the flow topology at the leading edge to become non-symmetric despite the complete symmetry of the problem. This is the first time in the literature such a phenomenon is documented for a supersonic airfoil leading edge injection. Furthermore, it enables the design of novel flow control strategies for the leading edge shock topology and flow structures in supersonic flows.

42 ENGINEERING↗
DOE OSTI2022

Experimentally validated high-fidelity simulations of a liquid jet in supersonic crossflow

Here, utilizing recent advancements in computational schemes for compressible, multiphase flows, this work features a parametric study of a pure liquid jet in supersonic crossflow that involves simulating the atomization process for four values of momentum-flux ratio. These simulations are validated against experimental results measured with high-speed X-ray imaging, which confirm the accuracy of the numerical approach. Also, the effect of numerical resolution on some flow behavior is investigated, revealing convergence of the jet shape and surface instability wavelength. Analysis of the resulting sprays includes statistical descriptions of the liquid distribution, liquid structures created through breakup, interfacial instabilities, and dominant flow features. As the flowrate increases, the spray penetrates further, it becomes more disperse, and less liquid impacts the wall, but the droplet size distribution changes little. The wavelength of instabilities on the windward side of the jet diverges from measured trends in subsonic crossflows. In a visualization of the time-averaged flow, counter-rotating vortices are observed along the jet core and in the wake, affecting the process of primary atomization and early droplet trajectories.

42 ENGINEERING↗
DOE OSTI2023

Physics model validation of propane and methane for Hydrogen Plus Other Alternative Fuels Risk Assessment Models (HyRAM+)

HyRAM+ is a toolkit that includes fast-running models for the unconstrained (i.e., no wall interactions) dispersion and flames for non-premixed fuels. The models were developed for use with hydrogen, but the toolkit was expanded to include propane and methane in a recent release. Here, in this work we validate the dispersion and flame models for these additional fuels, based on reported literature data. The validation efforts spanned a range of release conditions, from subsonic to underexpanded jets and flames for a range of mass flow rates. In general, the dispersion model works well for both propane and methane although the width of the jet/plume is predicted to be wider than observed in some cases. The flame model tends to over-predict the induced buoyancy for low-momentum flames, while the radiative heat flux agrees with the experimental data reasonably well, for both fuels. The models could be improved but give acceptable predictions for propane and methane behavior for the purposes of risk assessment.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Shock wave formation from head-on collision of two subsonic vortex rings

Vortex ring collisions have attracted intense interest in both water and air studies (Baird in Proc R Soc Lond Ser Math Phys Sci 409:59–65, 1987, Poudel et al. in Phys Fluids 33:096105, 2021, Lim and Nickels in Nature 357:225, 1992, New et al. in Exp Fluids 57:109, 2016, Suzuki et al. in Geophys Res Lett 34, 2007, Yan et al. in J Fluids Eng 140:054502, 2018, New et al. in J Fluid Mech 899, 2020, Cheng et al. in Phys Fluids 31:067107, 2019, Hernández and Reyes in 29:103604, 2017, Mishra et al. in Phys Rev Fluids, 2021, Zednikova et al. in Chem Eng Technol 42:843–850, 2019, Kwon et al. in Nature 600:64–69, 2021). These toroidal structures spin around a central axis and travel in the original direction of impulse while spinning around the core until inertial forces become predominant causing the vortex flow to spontaneously decay to turbulence (Vortex Rings, https://projects.iq.harvard.edu/smrlab/vortex-rings). Previous studies have shown the collision of subsonic vortex rings resulting in reconnected vortex rings, but the production of a shock wave from the collision has not been demonstrated visibly (Lim and Nickels in Nature 357:225, 1992, Cheng et al. in Phys Fluids 31:067107, 2019). Here we present the formation of a shock wave due to the collision of explosively formed subsonic vortex rings. As the vortex rings travel at Mach 0.66 toward the collision point, they begin to trap high pressure air between them. Upon collision, high pressure air was imploded and released radially away from the axis of the collision, generating a visible shock wave traveling through and away from the colliding vortices at Mach 1.22. Our results demonstrate a pressure gradient with high pressure release creating a shock wave. We anticipate our study to be a starting point for more explosively formed vortex collisions. For example, explosives with different velocities of detonation could be tested to produce vortex rings of varying velocities.

42 ENGINEERING↗
DOE OSTI2025

Multi-modal effects on indirect noise induced by turbulent entropy fields

Planar entropy waves are commonly assumed for predicting indirect combustion noise. However, the non-planar and turbulent nature of flows found in most practical combustors challenges this assumption. In the present paper, we examine the indirect noise generated by non-planar and turbulent entropy fields through subsonic nozzles. Firstly, we introduce a new transfer function framework that accounts for the contribution of non-planar Fourier modes of the entropy field to the indirect noise spectra. When applied to a turbulent flow field, this method demonstrates a significant improvement in spectral predictions compared with a conventional approach that only considers the planar mode. Secondly, simulations show that non-planar Fourier modes become significant above a threshold frequency ƒ thresh , found in the mid- to high-frequency range. This contribution of non-planar modes is explained by two-dimensional shear effects that distort the entropy waves. A scaling relation that uses residence times along streamlines is developed for ƒ thresh , showing good agreement with simulation results. Finally, we show that the indirect noise from non-planar entropy modes found in aviation combustors can be significant at frequencies below 1 kHz, which might be relevant in situations of thermo-acoustic instabilities coupled to indirect noise.

42 ENGINEERING↗
DOE OSTI2023

Aeroelastic Analysis Using Deforming Cartesian Grids

Ongoing work in air-vehicle design illustrates the potential of advanced concepts to provide significant improvements in efficiency; but with their incorporation of lightweight flexible structures, such configurations may require active control systems to ensure reliability and safety. However, many contemporary analysis methods are inefficient for aeroelastic analysis and design of such configurations. This paper describes the development of a new approach that automates the geometry setup, mesh generation, and assembly of fluid–structural coupling interfaces to enable efficient aeroelastic and aeroservoelastic analysis of advanced concepts. The core elements for this approach are a cut-cell Cartesian grid-based computational fluid dynamics solver, a nonlinear beam element structural model, a conservative fluid–structural interface treatment, and the formulation and implementation of a new deforming grid capability within the cut-cell Cartesian grid solver. In this paper, emphasis is on this latter component with detailed description given of the mesh motion strategy, evaluation of fluxes and structural loads at the surface, and computation of geometrical properties such as cell volume, directed face areas, centroids, and motion-induced fluxes for deforming Cartesian grids required to advance the flow states. Aeroelastic simulations exercising the capability show favorable agreement with data and predictions in the literature for subsonic and supersonic applications.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Nuclear fusion powered Titan aircraft

This paper discusses a system for Titan exploration enabled by nuclear fusion power. Titan is one of the most interesting locations in the solar system with a thick atmosphere, surface oceans, under-ice oceans and complex terrain. This paper provides a conceptual design of a fusion-powered system to explore many parts of Titan and enable the use of high-power instruments. The design includes a fusion-powered orbital transfer vehicle and an electric Titan science aircraft. A Direct Fusion Drive (DFD) propulsive engine could bring a sizable spacecraft to Titan orbit in less than two years. A second fusion reactor, configured as a closed-loop power generator, would be used for an electric Titan science aircraft. Both reactors are based on the Princeton Field-Reversed Configuration (PFRC) concept which combines an FRC with a magnetic mirror. PFRC uses a novel radio-frequency plasma heating system and deuterium-helium-3 fuel. A lower temperature plasma flows around the closed-field FRC region removing the fusion products. In the DFD propulsive configuration, this secondary flow permits direct and variable thrust and exhaust velocity. The science aircraft would do a powered entry to Titan and then have the capability to fly anywhere on the moon at subsonic speeds. The DFD-powered transfer vehicle would allow the in-orbit transfer stage to change inclination as needed to cover different areas of the surface.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Model Reduction for Steady Hypersonic Aerodynamics via Conservative Manifold Least-Squares Petrov–Galerkin Projection

High-speed aerospace engineering applications rely heavily on computational fluid dynamics (CFD) models for design and analysis. This reliance on CFD models necessitates performing accurate and reliable uncertainty quantification (UQ) of the CFD models, which can be very expensive for hypersonic flows. Additionally, UQ approaches are many-query problems requiring many runs with a wide range of input parameters. One way to enable computationally expensive models to be used in such many-query problems is to employ projection-based reduced-order models (ROMs) in lieu of the (high-fidelity) full-order model (FOM). In particular, the least-squares Petrov–Galerkin (LSPG) ROM (equipped with hyper-reduction) has demonstrated the ability to significantly reduce simulation costs while retaining high levels of accuracy on a range of problems, including subsonic CFD applications. This allows LSPG ROM simulations to replace the FOM simulations in UQ studies, making UQ tractable even for large-scale CFD models. This work presents the first application of LSPG to a hypersonic CFD application, the Hypersonic International Flight Research Experimentation 1 (HIFiRE-1) in a three-dimensional, turbulent Mach 7.1 flow. This paper shows the ability of the ROM to significantly reduce computational costs while maintaining high levels of accuracy in computed quantities of interest.

42 ENGINEERING↗
DOE OSTI2021

flash -light on the ring : hydrodynamic simulations of expanding supernova shells near supermassive black holes

ABSTRACT The way supermassive black holes (SMBHs) in Galactic Centres (GCs) accumulate their mass is not completely determined. At large scales, it is governed by galactic encounters, mass inflows connected to spirals arms and bars, or due to expanding shells from supernova (SN) explosions in the central parts of galaxies. The investigation of the latter process requires an extensive set of gas dynamical simulations to explore the multidimensional parameter space needed to frame the phenomenon. The aims of this paper are to extend our investigation of the importance of SNe for inducing accretion on to an SMBH and carry out a comparison between the fully hydrodynamic code flash and the much less computationally intensive code ring, which uses the thin shell approximation. We simulate 3D expanding shells in a gravitational potential similar to that of the GC with a variety of homogeneous and turbulent environments. In homogeneous media, we find convincing agreement between flash and ring in the shapes of shells and their equivalent radii throughout their whole evolution until they become subsonic. In highly inhomogeneous, turbulent media, there is also a good agreement of shapes and sizes of shells, and of the times of their first contact with the central 1-pc sphere, where we assume that they join the accretion flow. The comparison supports the proposition that an SN occurring at a galactocentric distance of 5 pc typically drives 1–3 M⊙ into the central 1 pc around the GC.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Model reduction for hypersonic aerodynamics via conservative LSPG projection and hyper-reduction

High-speed aerospace engineering applications rely heavily on computational fluid dynamics (CFD) models for design and analysis due to the expense and difficulty of flight tests and experiments. This reliance on CFD models necessitates performing accurate and reliable uncertainty quantification (UQ) of the CFD models. However, it is very computationally expensive to run CFD for hypersonic flows due to the fine grid resolution required to capture the strong shocks and large gradients that are typically present. Furthermore, UQ approaches are “many-query” problems requiring many runs with a wide range of input parameters. One way to enable computationally expensive models to be used in such many-query problems is to employ projection-based reduced-order models (ROMs) in lieu of the (high-fidelity) full-order model. In particular, the least-squares Petrov–Galerkin (LSPG) ROM (equipped with hyper-reduction) has demonstrated the ability to significantly reduce simulation costs while retaining high levels of accuracy on a range of problems including subsonic CFD applications. This allows computationally inexpensive LSPG ROM simulations to replace the full-order model simulations in UQ studies, which makes this many-query task tractable, even for large-scale CFD models. This work presents the first application of LSPG to a hypersonic CFD application. In particular, we present results for LSPG ROMs of the HIFiRE-1 in a three-dimensional, turbulent Mach 7.1 flow, showcasing the ability of the ROM to significantly reduce computational costs while maintaining high levels of accuracy in computed quantities of interest.

Fluid Dynamics↗
DOE OSTI2025

Transonic Turbulence and Density Fluctuations in the Near-Sun Solar Wind

We use in situ measurements from the first 19 encounters of Parker Solar Probe and the most recent five encounters of Solar Orbiter to study the evolution of the turbulent sonic Mach number M t (the ratio of the amplitude of velocity fluctuations to the sound speed) with radial distance and its relationship to density fluctuations. We focus on the near-Sun region with radial distances ranging from about 11 to 80 R ⊙ . Our results show that (1) the turbulent sonic Mach number M t gradually moves toward larger values as it approaches the Sun, until at least 11 R ⊙ , where M t is much larger than the previously observed value of 0.1 at and above 0.3 au; (2) transonic turbulence with M t ∼ 1 is observed in situ for the first time and is found mostly near the Alfvén critical surface; (3) Alfvén Mach number of the bulk flow M A shows a strong correlation with the plasma beta, indicating that most of the observed sub-Alfvénic intervals correspond to a low-beta plasma; (4) the scaling relation between density fluctuations and M t gradually changes from a linear scaling at larger radial distances to a quadratic scaling at smaller radial distances; and (5) transonic turbulence is more compressible than subsonic turbulence, with enhanced density fluctuations and slightly flatter spectra than subsonic turbulence. A systematic understanding of compressible turbulence near the Sun is necessary for future solar wind modeling efforts.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Velocity structure functions in multiphase turbulence: interpreting kinematics of Hα filaments in cool-core clusters

ABSTRACT The central regions of cool-core galaxy clusters harbour multiphase gas, with gas temperatures ranging from $10$ to $10^7\, \mathrm{K}$. Feedback from active galactic nuclei jets prevents the gas from undergoing a catastrophic cooling flow. However, the exact mechanism of this feedback energy input is unknown, mainly due to the lack of velocity measurements of the hot-phase gas. However, recent observations have measured the velocity structure functions (VSFs) of the cooler molecular (${\sim} 10\, \mathrm{K}$) and Hα filaments (${\sim} 10^4\, \mathrm{K}$) and used them to indirectly estimate the motions of the hot phase. In the first part of this study, we conduct high-resolution (3843–15363 resolution elements) simulations of homogeneous isotropic subsonic turbulence, without radiative cooling. We analyse the second-order velocity structure functions (VSF2) in these simulations and study the effects of varying spatial resolution, the introduction of magnetic fields, and the effect of projection along the line of sight (LOS) on it. In the second part of the study, we analyse high-resolution (7683 resolution elements) idealized simulations of multiphase turbulence in the intracluster medium from the companion study Mohapatra et al. We compare the VSF2 for both the hot ($T\sim 10^7\, \mathrm{K}$) and cold ($T\sim 10^4\, \mathrm{K}$) phases and find that their amplitude depends on the density contrast between the phases. They have similar scaling with separation, but introducing magnetic fields steepens the VSF2 of only the cold phase. We also find that projection along the LOS steepens the VSF2 for the hot phase and mostly flattens it for the cold phase.

Mohapatra, Rajsekhar (ORCID:0000000216007552)↗
DOE OSTI2022

On the effects of reactant stratification and wall curvature in non-premixed rotating detonation combustors

The optimization of non-premixed rotating detonation combustors (RDCs) requires improved understanding of the coupled effects of reactant stratification, fluid property gradients, and complex shock-wave interactions on the detonation wave structure within annular geometries. In the current work, simultaneous orthogonal views of chemiluminescence and hydroxyl planar laser-induced fluorescence (PLIF) are utilized to establish the existence of a dual-wave system characterized by leading and trailing detonation waves that are closely coupled by the local flow physics. These features are persistent over a wide range of mass flow rates and are consistent with prior observations of non-premixed rotating detonations in annular geometries. The detailed instantaneous time sequences are compared with a 3D reactive unsteady Reynolds averaged Navier-Stokes (URANS) simulation to more clearly elucidate the in-situ combustion dynamics and the sensitivity to reactant inlet conditions. It is found that the dual-wave system results from unburned reactants that survive the leading detonation wave in the injector near field and are consumed within a trailing azimuthal reflected-shock combustion (ARSC) zone. By contrast, the injector far field is characterized by rapid mixing due to a sudden drop to subsonic conditions, and the bifurcated detonation wave structure collapses into a stronger, single-wave detonation front with higher overall pressure ratio as compared with the dual-wave system. While each RDC will have different inflow, mixing, and combustion characteristics, the underlying interactions between the stratified reactants and azimuthal wave dynamics identified through the combination of advanced MHz-rate diagnostics and 3D numerical simulations have important implications for the study of detonation wave stability, mode transition, and combustion efficiency in non-premixed annular RDCs.

3D URANS↗
DOE OSTI2023

As a Matter of Dynamical Range – Scale Dependent Energy Dynamics in MHD Turbulence

Abstract Magnetized turbulence is ubiquitous in many astrophysical and terrestrial plasmas but no universal theory exists. Even the detailed energy dynamics in magnetohydrodynamic (MHD) turbulence are still not well understood. We present a suite of subsonic, super-Alfvénic, high plasma beta MHD turbulence simulations that only vary in their dynamical range, i.e., in their separation between the large-scale forcing and dissipation scales, and their dissipation mechanism (implicit large eddy simulation, ILES, and direct numerical simulation (DNS)). Using an energy transfer analysis framework we calculate the effective numerical viscosities and resistivities, and demonstrate that all ILES calculations of MHD turbulence are resolved and correspond to an equivalent visco-resistive MHD turbulence calculation. Increasing the number of grid points used in an ILES corresponds to lowering the dissipation coefficients, i.e., larger (kinetic and magnetic) Reynolds numbers for a constant forcing scale. Independently, we use this same framework to demonstrate that—contrary to hydrodynamic turbulence—the cross-scale energy fluxes are not constant in MHD turbulence. This applies both to different mediators (such as cascade processes or magnetic tension) for a given dynamical range as well as to a dependence on the dynamical range itself, which determines the physical properties of the flow. We do not observe any indication of convergence even at the highest resolution (largest Reynolds numbers) simulation at 2048 3 cells, calling into question whether an asymptotic regime in MHD turbulence exists, and, if so, what it looks like.

79 ASTRONOMY AND ASTROPHYSICS↗