Search NASA⌕ Search

SEARCH · Search NASA

Results for “substrate accessibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Effects of Polymer Morphology on Solvent and Catalyst Accessibility during Polyethylene and Polystyrene Autoxidation

Efficient catalytic deconstruction of plastics requires facile solvent and catalyst access to polymer substrates to minimize mass transfer effects. Autoxidation using Co(II) acetate, Mn(II) acetate, and a radical carrier in acetic acid is a promising strategy to deconstruct mixed plastic waste, yet the role of polymer morphology in governing solvent and catalyst accessibility remains poorly understood. Here, in situ simultaneous small- and wide-angle X-ray scattering (SAXS/WAXS), complemented by X-ray fluorescence (XRF) imaging and high-pressure differential scanning calorimetry (DSC), were used to elucidate interactions between acetic acid, a Co/Mn catalyst solution, and semicrystalline polyethylene (PE) and amorphous polystyrene (PS) from room temperature to 160 °C. In PE, acetic acid and catalyst access were confined to amorphous regions and cryomilled particle interfaces at room temperature, while crystalline lamellae remained intact after soaking for up to 34 h. Increasing temperature enabled solvent uptake into PE, followed by solvent-assisted softening above 100 °C, and a modest melting-point depression that removed lamellar transport barriers upon melting. Conversely for PS, acetic acid penetrated the glassy polymer without inducing chain mobility until the glass transition was reached, above which the observed structural changes were consistent with enhanced segmental mobility which enabled bulk penetration. These results suggest that polymer morphology and thermally activated physical transitions arising from diffusion and polymer–solvent interactions can influence whether autoxidation of plastics is transport-limited or kinetically controlled, providing a framework for aligning reaction conditions with reaction outcomes.

09 BIOMASS FUELS↗
NASA NTRS1993

Evaluation of ovostatin and ovostatin assay

Ovostatin is a 780,000 MW protein, originally isolated from chicken egg white, which is active as a protease inhibitor. Structural studies indicate that the protein is a tetramer of identical subunits of 165,000 MW which can be separated upon reduction with beta- mercaptoethanol. Chicken ovostatin is an inhibitor of metalloproteases such as collagenase and thermolysin, and of acid proteases such as pepsin and rennin. Ovostatin isolated from duck eggs and from crocodile eggs appears to be similar to chicken egg ovostatin, but with significant differences in structure and function. Duck ovostatin contains a reactive thiol ester which is not found in the chicken protein, and duck and crocodile ovostatin inhibit serine protease such as trypsin and chymotrypsin, while chicken ovostatin does not. Electron microscopy of ovostatin indicates that two subunits associated near the middle of each polypeptide to form a dimer with four arms. Two of these dimers then associate to produce a tetramer with eight arms, with the protease binding site near the center of the molecule. Upon binding of the protease, a conformational change causes all eight arms to curl toward the center of the molecule, effectively trapping the protease and sterically hindering access of the substrates to its active site. The structural organization and mechanism of action proposed for ovostatin are nearly identical to that proposed for alpha(sub 2)- macroglobulin, a serum protease inhibitor which may play an important role in regulation of proteases in animal tissues. Although the general arrangement of subunits appears to be the same for all ovostatins studied, some differences have been observed, with chicken ovostatin more closely resembling reptilian ovostatin than the duck protein. This is a surprising result, given the evolutionary relatedness of chickens and ducks. It is possible that the differences in structures may be due to deformed subunit arrangements which occur during the processing and fixing necessary for electron microscopy. Examination of the native structure of these proteins using X-ray crystallography would help clarify these discrepancies.

Moriarity, Debra M.↗
NASA NTRS1992

Onset conditions for gas phase reaction and nucleation in the CVD of transition metal oxides

A combined experimental/theoretical study is presented of the onset conditions for gas phase reaction and particle nucleation in hot substrate/cold gas CVD of transition metal oxides. Homogeneous reaction onset conditions are predicted using a simple high activation energy reacting gas film theory. Experimental tests of the basic theory are underway using an axisymmetric impinging jet CVD reactor. No vapor phase ignition has yet been observed in the TiCl4/O2 system under accessible operating conditions (below substrate temperature Tw = 1700 K). The goal of this research is to provide CVD reactor design and operation guidelines for achieving acceptable deposit microstructures at the maximum deposition rate while simultaneously avoiding homogeneous reaction/nucleation and diffusional limitations.

Collins, J.↗
DOE OSTI2024

Mycorrhizal fungi modify decomposition: a meta‐analysis

Summary It has been proposed that ectomycorrhizal fungi can reduce decomposition while arbuscular mycorrhizal fungi may enhance it. These phenomena are known as the ‘Gadgil effect’ and ‘priming effect’, respectively. However, it is unclear which one predominates globally. We evaluated whether mycorrhizal fungi decrease or increase decomposition, and identified conditions that mediate this effect. We obtained decomposition data from 43 studies (97 trials) conducted in field or laboratory settings that controlled the access of mycorrhizal fungi to substrates colonized by saprotrophs. Across studies, mycorrhizal fungi promoted decomposition of different substrates by 6.7% overall by favoring the priming effect over the Gadgil effect. However, we observed significant variation among studies. The substrate C : N ratio and absolute latitude influenced the effect of mycorrhizal fungi on decomposition and contributed to the variation. Specifically, mycorrhizal fungi increased decomposition at low substrate C : N and absolute latitude, but there was no discernable effect at high values. Unexpectedly, the effect of mycorrhizal fungi was not influenced by the mycorrhizal type. Our findings challenge previous assumptions about the universality of the Gadgil effect but highlight the potential of mycorrhizal fungi to negatively influence soil carbon storage by promoting the priming effect.

Plant Sciences↗
DOE OSTI2024

Trapping light in air with membrane metasurfaces for vibrational strong coupling

Optical metasurfaces can manipulate electromagnetic waves in unprecedented ways at ultra-thin engineered interfaces. Specifically, in the mid-infrared (mid-IR) region, metasurfaces have enabled numerous biochemical sensing, spectroscopy, and vibrational strong coupling (VSC) applications via enhanced light-matter interactions in resonant cavities. However, mid-IR metasurfaces are usually fabricated on solid supporting substrates, which degrade resonance quality factors (Q) and hinder efficient sample access to the near-field electromagnetic hotspots. Besides, typical IR-transparent substrate materials with low refractive indices, such as CaF 2 , NaCl, KBr, and ZnSe, are usually either water-soluble, expensive, or not compatible with low-cost mass manufacturing processes. Here, we present novel free-standing Si-membrane mid-IR metasurfaces with strong light-trapping capabilities in accessible air voids. We employ the Brillouin zone folding technique to excite tunable, high-Q quasi-bound states in the continuum (qBIC) resonances with our highest measured Q-factor of 722. Leveraging the strong field localizations in accessible air cavities, we demonstrate VSC with multiple quantities of PMMA molecules and the qBIC modes at various detuning frequencies. Our new approach of fabricating mid-IR metasurfaces into semiconductor membranes enables scalable manufacturing of mid-IR photonic devices and provides exciting opportunities for quantum-coherent light-matter interactions, biochemical sensing, and polaritonic chemistry. The authors introduce a mid-IR metasurface fabricated by decorating a free-standing Si-membrane with air holes. The enhanced light-matter interactions in such air cavities enable vibrational strong coupling and advanced biochemical sensing.

infrared spectroscopy↗
NASA NTRS2011

Differential Processing of Low and High LET Radiation Induced DNA Damage: Investigation of Switch from ATM to ATR Signaling

The members of the phosphatidylinositol kinase-like kinase family of proteins namely ataxia-telangiectasia mutated (ATM) and ATM- and Rad3-related (ATR) are directly responsible for the maintenance of genomic integrity by mounting DDR through signaling and facilitating the recruitment of repair factors at the sites of DNA damage along with coordinating the deployment of cell cycle checkpoints to permit repair by phosphorylating Checkpoint kinase Chk1, Chk2 and p53. High LET radiation from GCR (Galactic Cosmic Rays) consisting mainly of protons and high energy and charged (HZE) particles from SPE (Solar Particle Event) pose a major health risk for astronauts on their space flight missions. The determination of these risks and the design of potential safeguards require sound knowledge of the biological consequences of lesion induction and the capability of the cells to counter them. We here strive to determine the coordination of ATM and ATR kinases at the break sites directly affecting checkpoint signaling and DNA repair and whether differential processing of breaks induced by low and high LET radiation leads to possible augmentation of swap of these damage sensors at the sites of DNA damage. Exposure of cells to IR triggers rapid autophosphorylation of serine-1981 that causes dimer dissociation and initiates monomer formation of ATM. ATM kinase activity depends on the disruption of the dimer, which allows access and phosphorylation of downstream ATM substrates like Chk2. Evidence suggests that ATM is activated by the alterations in higher-order chromatin structure although direct binding of ATM to DSB ends may be a crucial step in its activation. On the other hand, in case of ATR, RPA (replication protein A)-coated ssDNA (single-stranded DNA) generated as a result of stalled DNA replication or during processing of chromosomal lesions is crucial for the localization of ATR to sites of DNA damage in association with ATR-interacting protein (ATRIP). Although the majority of RPA-coated ssDNA is generally present only during DNA replication, ATR activation in G1 and G2-phase might still require formation of RPA-coated ssDNA, probably initiated by the MRN-CtIP complex and then extended by the Exo1- or BLM-dependent mechanisms at the sites of DSBs. Evidence accumulates that activation of ATM and ATR are oppositely regulated by the length of single stranded overhangs generated at the break sites by processes mentioned above and these stretches of single stranded overhangs hold the clue for ATM to ATR switch at broken DNA ends. We irradiated 82-6hTERT human fibroblast cells with low LET gamma-rays and high LET Fe and Si particles. Preliminary results with cells exposed to 1Gy gamma-rays show that the kinetics of pChk2-pT68 foci formation is comparable to that of gamma-H2AX although they appear to recede quicker. The number and intensity of observed foci reaches a maximum at 30 min and 60 min post IR for Chk2-pT68 and gamma-H2AX foci respectively and all Chk2-pT68 foci colocalize with gamma-H2AX foci. The kinetics of Chk1-pS345 and ATRIP are being determined. Results of Chk2-pT68 foci kinetics was also corroborated by western blot experiments, although phosphorylation was detected as early as 10 min and started receding 30 min post IR with 2Gy of gamma-rays. On the other hand, level of ATR-pS428 reached its maximum between 60 and 120 min and was maintained until the last measured time point of 4 hours post IR as determined by western blotting. Experiments performed with high LET Fe and Si particles will be reported.

Saha, Janapriya↗
DOE OSTI2026

Comparison of automated chemical-guided segmentation and human annotation of soil organic matter in X-ray microcomputed tomography imaging in contrasted soil types

Soil organic matter (OM) formation and persistence is strongly influenced by the spatial distribution of organic substrates and microscale soil heterogeneity by dictating OM accessibility to microorganisms. However, traditional size and/or density fractionation techniques disrupt aggregate architecture, eliminating spatial information needed to fully understand intra-aggregate OM distribution. To quantify three-dimensional OM spatial distribution and automate segmentation in X-ray microcomputed tomography (µCT) imaging without human annotation bias, we developed an iodine gas vapor (I2) based staining workflow that eliminates labor-intensive manual annotation while maintaining segmentation accuracy, using aggregates from four taxonomically diverse soils (Xerofluvent, Haploxeroll Sphagnofibrist, Palehumult) with an 8-fold range of soil organic carbon. Human annotation of 10 µCT slices by the experienced and inexperienced annotators resulted in variations up to 3% in the Dice similarity coefficient (DSC), reflecting a degree of inherent subjectivity of manual labeling. Such inconsistencies are expected to compound as the number of manually annotated slices increases. Dual-energy µCT imaging at 33.1 keV (below the iodine (I) K-edge) and 33.2 keV (above the I K-edge) was used to resolve aggregate microstructure following I2 staining. The automated image subtraction pipeline identified OM regions by the I Kedge induced brightness increases, achieving DSC values of 0.58–0.83 relative to an experienced annotator. Sensitivity analyses revealed that the reconstruction alpha value—optimized via the open-source tool TomocuPy—and the 3D registration slice count were the primary determinants of accuracy, providing a novel benchmark for dual-energy soil imaging. The pipeline without GPU acceleration achieved 9.6 to 43.2 times faster than manual annotation. Using GPU-accelerated image post-processing and affine transformation matrices, the pipeline successfully segmented OM elements for large-scale datasets (3232×3232 pixel, 2048 slices) within ~5200 s from raw file acquisition to segmented output. The high-throughput approach enables the quantification of OM spatial distribution across diverse and heterogeneous soil.

Soil microbial biomass↗
DOE OSTI2026

Towards Spatial Control of Reaction Selectivity on Photocatalysts using Area Selective Atomic Layer Deposition on Model Dual Site Electrocatalyst Platform

Photocatalytic water splitting is a promising route to low-cost H2; however, this approach is currently limited by solar-to-hydrogen (STH) conversion efficiencies in the sub-10% range. Z-scheme water splitting, in which H2 and O2 evolving particles are operated in separate compartments and electronically coupled by a soluble redox mediator, offers improvements in STH efficiency but introduces high rates of undesired side and back reactions. Nanoscopic oxide coatings (e.g., CrOx, and SiOx) have previously been used to selectively block undesired reactants from reaching active sites; however, a coating encapsulating the entire photocatalyst particle limits activity as the particle can no longer facilitate both half reactions. In contrast to photodeposition, which may produce non-uniform overlayers due to the difficulty of controlling local electrochemical reactivity on the surface, area-selective atomic layer deposition (AS-ALD) can be used to deposit conformal ultrathin oxide coatings while preserving access to non-growth areas of a substrate surface. To develop this technique for Z-scheme photocatalysts, we performed AS-ALD of TiO2 on a dual site planar electrocatalyst based on interdigitated arrays of Pt and Au. Self-assembled monolayers of 1-octadecanethiol (ODT) were used to block growth on the Au array, resulting in a patterned surface in which only the Pt sites were encapsulated with TiO2. These electrocatalysts demonstrated localized reaction selectivity for hydrogen evolution reaction (HER) over the TiO2/Pt sites, while the uncoated Au sites retained activity towards Fe(II)/Fe(III) redox (FeRR). Under independent potential control, these microelectrodes showed that selectively deposited TiO2 coatings can suppress the rate of back reactions on neighboring active sites by an order of magnitude compared to uncoated control samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Evaluating the Origins of Aerobic Oxidation Catalysis with TAM-3, a MOF with Accessible Co(II) Sites and Large Pores

Metal-organic frameworks (MOFs) are attractive platforms that merge concepts of homogeneous and heterogeneous catalysis. Catalyst design and optimization are enabled by an array of synthetic methods that offer independent control over the local chemical structure of lattice-embedded metal ions (i.e., ligand identity and geometry) and the long-range materials properties (i.e., porosity). Establishing the origin of catalytic activity in MOF-promoted reactions remains a significant challenge: The relative rates of catalyst turnover and substrate diffusion dictate the extent to which interstitial sites are accessible and operational in catalysis. To minimize the contributions of surface sites in catalysis, materials with large pore dimensions are often sought, however, the impact of pore expansion on the origins of catalytic activity is similarly challenging to establish. Here, we describe TAM-3, a Co(II) based MOF with accessible metal sites supported by a facially coordinating tris-tetrazole ligand set. TAM-3 features large channel-like pores (17 × 23 Å) and promotes aerobic C−H oxidation and olefin epoxidation. Using a set of simple kinetics experiments, based on the analysis of kinetic isotope effects and olefin oxidation diastereoselectivities, we demonstrate that despite the large pores, interstitial metal ions do not significantly contribute to the observed substrate oxidation. This study highlights the importance of conducting kinetic experiments to assess the origin of apparent catalytic activity with MOFs and the challenge of harnessing reactive oxidants with microporous catalyst materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Isolation of Single Donors in ZnO

The shallow donor in zinc oxide (ZnO) is a promising semiconductor spin qubit with optical access. Single indium donors are isolated in a commercial ZnO substrate using plasma focused ion beam (PFIB) milling. Quantum emitters are identified optically by spatial and frequency filtering. The indium donor assignment is based on the optical bound exciton transition energy and magnetic dependence. The emission stability of these single donors in terms of both intensity and frequency, alongside their transition linewidths less than twice the lifetime limit, highlight the promise of single In donors as optically accessible spin qubits. Here, the optical stability of single donors after FIB fabrication is promising for optical device integration required for scalable quantum technologies based on single donors in direct band gap semiconductors.

42 ENGINEERING↗
DOE OSTI2026

Mimicking Extradiol Dioxygenase Reactivity on Iridium

Extradiol dioxygenases catalyze the cleavage of benzenediol (catechol) or vicinal aminophenols via oxygen atom insertion into the 2,3- C–C bond. These reactions are most often proposed to proceed through the migratory rearrangement of a d6 alkylperoxide, generating the corresponding d 6 ring expanded product. However, regiospecific insertion remains a rare outcome among synthetic model complexes. Here, a dioxygenated Ir complex (2) converts to (a) the paramagnetic metallatrioxolane (3) and (b) oxygen atom inserted products (4) and (5); all three complexes are third-row metal analogues of enzymatic intermediates. The conversion of 2 to 3 was triggered by an H• abstraction, generating a third-row metallatrioxolane that is one electron reduced from the canonical d 6 alkylperoxide. Alternatively, photolysis of 2 (467 nm) results in ring-expanded product 4, from which an H• can be abstracted to generate 5. This latter complex is also one electron reduced relative to the canonical ring expansion product. Because extradiol mechanisms were largely defined using Fe(II) metallocofactors, 3 and 5 may be especially relevant to the known Co(II) accepting variants. We propose these states became synthetically accessible via the incorporation of a catechol-like substrate into the larger, multidentate ligand L1. This perturbation enhances the affinity of L1 (and related intermediates) to the metal. The same perturbation may have also been key in characterizing the first κ 2 -bound, dianionic ortho ester ligand – the observed binding mode in the x-ray structure of 5. Broadly, we propose through this case study that connecting abiological dioxygen complexes to non-heme oxygenase-like intermediates might be a “roadmap” towards regiospecific aerobic oxygenations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2007

Triple and Quadruple Junctions Thermophotovoltaic Devices Lattice Matched to InP

Thermophotovoltaic (TPV) conversion of IR radiation emanating from a radioisotope heat source is under consideration for deep space exploration. Ideally, for radiator temperatures of interest, the TPV cell must convert efficiently photons in the 0.4-0.7 eV spectral range. Best experimental data for single junction cells are obtained for lattice-mismatched 0.55 eV InGaAs based devices. It was suggested, that a tandem InGaAs based TPV cell made by monolithically combining two or more lattice mismatched InGaAs subcells on InP would result in a sizeable efficiency improvement. However, from a practical standpoint the implementation of more than two subcells with lattice mismatch systems will require extremely thick graded layers (defect filtering systems) to accommodate the lattice mismatch between the sub-cells and could detrimentally affect the recycling of the unused IR energy to the emitter. A buffer structure, consisting of various InPAs layers, is incorporated to accommodate the lattice mismatch between the high and low bandgap subcells. There are evidences that the presence of the buffer structure may generate defects, which could extend down to the underlying InGaAs layer. The unusual large band gap lowering observed in GaAs(1-x)N(x) with low nitrogen fraction [1] has sparked a new interest in the development of dilute nitrogen containing III-V semiconductors for long-wavelength optoelectronic devices (e.g. IR lasers, detector, solar cells) [2-7]. Lattice matched Ga1-yInyNxAs1-x on InP has recently been investigated for the potential use in the mid-infrared device applications [8], and it could be a strong candidate for the applications in TPV devices. This novel quaternary alloy allows the tuning of the band gap from 1.42 eV to below 1 eV on GaAs and band gap as low as 0.6eV when strained to InP, but it has its own limitations. To achieve such a low band gap using the quaternary Ga1-yInyNxAs1-x, either it needs to be strained on InP, which creates further complications due to the creation of defects and short life of the device or to introduce high content of indium, which again is found problematic due to the difficulties in diluting nitrogen in the presence of high indium [9]. An availability of material of proper band gap and lattice matching on InP are important issues for the development of TPV devices to perform better. To address those issues, recently we have shown that by adjusting the thickness of individual sublayers and the nitrogen composition, strain balanced GaAs(1-x)N(x)/InAs(1-y)N(y) superlattice can be designed to be both lattice matched to InP and have an effective bandgap in the desirable 0.4- 0.7eV range [10,11]. Theoretically the already reduced band gap of GaAs(1-x)N(x), due to the nitrogen effects, can be further reduced by subjecting it to a biaxial tensile strain, for example, by fabricating pseudomorphically strained layers on commonly available InP substrates. While such an approach in principle could allow access to smaller band gap (longer wavelength), only a few atomic monolayers of the material can be grown due to the large lattice mismatch between GaAs(1-x)N(x) and InP (approx.3.8-4.8 % for x<0.05, 300K). This limitation can be avoided using the principle of strain balancing [12], by introducing the alternating layers of InAs(1-y)N(y) with opposite strain (approx.2.4-3.1% for x<0.05, 300K) in combination with GaAs(1-x)N(x). Therefore, even an infinite pseudomorphically strained superlattice thickness can be realized from a sequence of GaAs(1-x)N(x) and InAs(1-y)N(y) layers if the thickness of each layer is kept below the threshold for its lattice relaxation

Bhusal, L.↗
DOE OSTI2025

Addressing genome scale design tradeoffs in Pseudomonas putida for bioconversion of an aromatic carbon source

Genome-scale metabolic models (GSMM) are commonly used to identify gene deletion sets that result in growth coupling and pairing product formation with substrate utilization and can improve strain performance beyond levels typically accessible using traditional strain engineering approaches. However, sustainable feedstocks pose a challenge due to incomplete high-resolution metabolic data for non-canonical carbon sources required to curate GSMM and identify implementable designs. Here we address a four-gene deletion design in the Pseudomonas putida KT2440 strain for the lignin-derived non-sugar carbon source, p-coumarate (p-CA), that proved challenging to implement. We examine the performance of the fully implemented design for p-coumarate to glutamine, a useful biomanufacturing intermediate. In this study glutamine is then converted to indigoidine, an alternative sustainable pigment and a model heterologous product that is commonly used to colorimetrically quantify glutamine concentration. Through proteomics, promoter-variation, and growth characterization of a fully implemented gene deletion design, we provide evidence that aromatic catabolism in the completed design is rate-limited by fumarase hydratase (FUM) enzyme activity in the citrate cycle and requires careful optimization of another fumarate hydratase protein (PP_0897) expression to achieve growth and production. A double sensitivity analysis also confirmed a strict requirement for fumarate hydratase activity in the strain where all genes in the growth coupling design have been implemented. Metabolic cross-feeding experiments were used to examine the impact of complete removal of the fumarase hydratase reaction and revealed an unanticipated nutrient requirement, suggesting additional functions for this enzyme. While a complete implementation of the design was achieved, this study highlights the challenge of completely inactivating metabolic reactions encoded by under-characterized proteins, especially in the context of multi-gene edits.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1995

NASA Tech Briefs, November 1995

The contents include: 1) Mission Accomplished; 2) Resource Report: Marshall Space Flight Center; 3) NASA 1995 Software of the Year Award; 4) Microbolometers Based on Epitaxial YBa2Cu3O(sub 7-x) Thin Films; 5) Garnet Random-Access Memory; 6) Fabrication of SNS Weak Links on SOS Substrates; 7) High-Voltage MOSFET Switching Circuit; 8) Asymmetric Switching for a PWM H-Bridge Power Circuit; 9) Better Ohmic Contacts for InP Semiconductor Devices; 10) Low-Bandgap Thermovoltaic Materials and Devices; 11) Digital Frequency-Differencing Circuit; 12) Imaging Magnetometer; 13) Computer-Assisted Monitoring of a Complex System; 14) Buffered Telemetry Demodulator; 15) Compact Multifunction Inspection Head; 16) Optical Detection of Fractures in Ceramic Diaphragms; 17) Eddy-Current Detection of Cracks in Reinforced Carbon/Carbon; 18) Apparent Thermal Conductivity of Multilayer Insulation; 19) Optimizing Misch-Metal Compositions in Metal Hydride Anodes; 20) Device for Sampling Surface Contamination; 21) Probabilistic Failure Assessment for Fatigue; 22) Probabilistic Fatigue and Flaw-Propagation Analysis; 23) Windows Program for Driving the TDU-850 Printer; 24) Subband/Transform MATLAB Functions for Processing Images; 25) Computing Equilibrium Chemical Compositions; 26) Program Processes Thermocouple Readings; 27) ICAN-Second-Generation Integrated Composite Analyzer; 28) Integrated Composite Analyzer with Damping Capabilities; 29) Computing Efficiency of Transfer of Microwave Power; 30) Program Calculates Power Demands of Electronic Designs; 31) Cost-Estimation Program; 32) Program Estimates Areas Required by Electronic Designs; 33) Program to Balance Mapped Turbopump Assemblies; 34) BiblioTech; 35) Controlling Mirror Tilt With a Bimorph Actuator; 36) Burst-Disk Device Simulates Effect of Pyrotechnic Device; 37) Bearing-Mounting Concept Accommodates Thermal Expansion; 38) Parallel-Plate Acoustic Absorbers for Hot Environments; 39) Adjustable-Length Strut Withstands Large Cyclic Loads; 40) Tool Indicates Contact Angles in Bearing Raceways; 41) Gravity Slides With Magnetic Braking; 42) High-Torque, Lightweight, Pneumatically Driven Wrench for Small Spaces; 43) Device for Testing Compatibility of an O-Ring; 44) Magnetic Heat Pump Containing Flow Diverters; 45) Variable-Tilt Helicopter Rotor Mast; 46) "Beach-Ball" Robotic Rovers; 47) Apparatus Would Measure Temperatures of Ball Bearings; 48) Flexible Borescope for Inspecting Ducts; 49) Texturing Copper To Reduce Secondary Emission of Electrons; 50) Automated Laser Cutting in Three Dimensions; 51) Algorithm Helps Monitor Engine Operation; 52) Flexible Revision of Data-Processing Communications; 53) Software for Managing the Use of Land; 54) Thermal Strap Increases Cryocooling Efficiency; 55) Reversible Nut With Engagement Indication; 56) Control Algorithms for Kinematically Redundant Manipulators; 57) Computed Hydrogen-Flow Splits in a Rocket Engine; 58) Pressure and Thermal Modeling of Rocket Launches; 59) Field of View of a Spacecraft Antenna: Analysis and Software; 60) Digital Controller for Laser-Beam-Steering Subsystem; 61) More About Beam-Steering Subsystem for Laser Communication; 62) Digital Controller for Laser-Beam-Steering Subsystem: Part 2; 63) Interface Circuit Board for Space-Shuttle Communications; 64) Automated Planning of Spacecraft Telecommunications; 65) Artifacts of Spectral Analysis of Instrument Readings; 66) Neural-Network Controller for Vibration Suppression; 67) Adaptive Finite-Element Computation in Fracture Mechanics; 68) Attitude Control for the Cassini Spacecraft; 69) Analytical Model for Fluid Dynamics in a Microgravity Environment; 70) Study of Rocket-Engine Joints Bonded by NVCU/NARloy-Z; 71) Improved Silicon Nitride for Advanced Heat Engines; 72) Parameters for Welding Aluminum/Lithium Alloys; 73) Lightweight Composite Intertank Structure; 74) Foil Patches Seal Small Vacuum Leaks; 75) Data Base on Cables and Connectors; 76) Effect of Clock Mode on Radiation Hardnessf an ADC; and 77) Fault-Tolerant Control for a Robotic Inspection System.

Source record↗
NASA NTRS2005

Characterization of Dual-Band Infrared Detectors for Application to Remote Sensing

NASA Langley Research Center (LaRC), in partnership with the Rensselaer Polytechnic Institute (RPI), developed photovoltaic infrared (IR) detectors suitable at two different wavelengths using Sb-based material systems. Using lattice-matched InGaAsSb grown on GaSb substrates, dual wavelength detectors operating at 1.7 and 2.5 micron wavelengths can be realized. P-N junction diodes are fabricated on both GaSb and InGaAsSb materials. The photodiode on GaSb detects wavelengths at 1.7 micron and the InGaAsSb detector detects wavelengths at 2.2 micron or longer depending on the composition. The films for these devices are grown by metal-organic vapor phase epitaxy (MOVPE). The cross section of the independently accessed back-to-back photodiode dual band detector consists of a p-type substrate on which n-on-p GaInAsSb junction is grown, followed by a p-on-n GaSb junction. There are three ohmic contacts in this structure, one to the p-GaSb top layer, one to the n-GaSb/n-GaInAsSb layer and one to the p-type GaSb substrate. The common terminal is the contact to the n-GaSb/n-GaInAsSb layer. The contact to the n-GaSb/p-GaInAsSb region of the photodiode in the dual band is electrically connected and is accessed at the edge of the photodiode. NASA LaRC acquired the fabricated dual band detector from RPI and characterized the detector at its Detector Characterization Laboratory. Characterization results, such as responsivity, noise, quantum efficiency, and detectivity will be presented.

Abedin, M. Nurul↗
DOE OSTI2025

Host Cavities Enhance the Photocatalytic Conversion of α‐Terpinene to Ascaridole Under Visible‐Light Irradiation

BODIPY-functionalized host molecules have been used as effective visible-light photosensitizers in the conversion of α-terpinene to ascaridole in the presence of molecular oxygen. Host-guest interactions enhance the effective local concentration of the substrate and singlet oxygen generated by the photosensitizing host. This results in up to a 28-fold increase in the rate of conversion depending on the host employed. A tetramethyl BODIPY analogue, in which guest access to the host cavity is blocked, was also employed to confirm that the cavities do indeed enhance substrate turnover. Whilst the latter photocatalyst is more efficient due to the suppression of nonradiative relaxation pathways associated with rotation of the meso-phenyl substituent, the rate enhancement induced by host-guest binding is not present. Combined, this provides insight for the future design of enhanced systems.

Main, Mawgan U↗
DOE OSTI2025

A Change in C–H Activation Mechanism: Experimental and Computational Investigations of Rh-Catalyzed Disubstituted Benzene Functionalization

We report the ethenylation of 1,3- and 1,2-disubstituted benzenes using [(η 2 -C 2 H 4 ) 2 Rh(μ-OAc)] 2 as a catalyst precursor and Cu(OPiv) 2 as the oxidant. The regioselectivity of alkenylation for 1,3-disubstituted benzenes produces 3,5-disubstituted styrene products, while the alkenylation of 1,2-disubstituted benzenes produces 3,4- disubstituted styrene products. The rate of alkenylation is influenced by steric and electronic factors based on the substituents of the benzene unit. In all cases, 1,2-disubstituted benzenes react faster than 1,3-disubstituted benzenes, with a rate difference that is from 2 times up to >70 times more rapid for 1,2-disubstituted substrates. This is likely due to the difference in the number of accessible C−H bonds based on the steric protection of C−H bonds adjacent to functionality. Furthermore, the rate of alkenylation is influenced by the arene substituent electronics. The rates of alkenylation for 1,2-disubstituted benzenes follow the trend OMe > Me > CF 3 > Cl, while for 1,3-disubstituted benzenes the trend is CF 3 > Cl > Me > OMe. Using quantum mechanics DFT calculations, we found that the C−H activation step can occur by two different mechanisms. The electronic properties of substituents on the arene ring change the preferred C−H bond-breaking mechanism for 1,2-disubstituted and 1,3-disubstituted benzenes.

Aromatic compounds↗
NASA NTRS2022

Biological Oxidation of Fe(II)-Bearing Smectite by Microaerophilic Iron Oxidizer Sideroxydans lithotrophicus Using Dual Mto and Cyc2 Iron Oxidation Pathways

Fe(II) clays are common across many environments, making them a potentially significant microbial substrate, yet clays are not well established as an electron donor. Therefore, we explored whether Fe(II)-smectite supports the growth of Sideroxydans lithotrophicus ES-1, a microaerophilic Fe(II)-oxidizing bacterium (FeOB), using synthesized trioctahedral Fe(II)-smectite and 2% oxygen. S. lithotrophicus grew substantially and can oxidize Fe(II)-smectite to a higher extent than abiotic oxidation, based on X-ray near-edge spectroscopy (XANES). Sequential extraction showed that edge-Fe(II) is oxidized before interior-Fe(II) in both biotic and abiotic experiments. The resulting Fe(III) remains in smectite, as secondary minerals were not detected in biotic and abiotic oxidation products by XANES and Mössbauer spectroscopy. To determine the genes involved, we compared S. lithotrophicus grown on smectite versus Fe(II)-citrate using reverse-transcription quantitative PCR and found that cyc2 genes were highly expressed on both substrates, while mtoA was upregulated on smectite. Proteomics confirmed that Mto proteins were only expressed on smectite, indicating that ES-1 uses the Mto pathway to access solid Fe(II). We integrate our results into a biochemical and mineralogical model of microbial smectite oxidation. This work increases the known substrates for FeOB growth and expands the mechanisms of Fe(II)-smectite alteration in the environment.

smectite↗