Search NASA⌕ Search

SEARCH · Search NASA

Results for “sunshades”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Thermal Model Predictions of Advanced Stirling Radioisotope Generator Performance

This paper presents recent thermal model results of the Advanced Stirling Radioisotope Generator (ASRG). The three-dimensional (3D) ASRG thermal power model was built using the Thermal Desktop(trademark) thermal analyzer. The model was correlated with ASRG engineering unit test data and ASRG flight unit predictions from Lockheed Martin's (LM's) I-deas(trademark) TMG thermal model. The auxiliary cooling system (ACS) of the ASRG is also included in the ASRG thermal model. The ACS is designed to remove waste heat from the ASRG so that it can be used to heat spacecraft components. The performance of the ACS is reported under nominal conditions and during a Venus flyby scenario. The results for the nominal case are validated with data from Lockheed Martin. Transient thermal analysis results of ASRG for a Venus flyby with a representative trajectory are also presented. In addition, model results of an ASRG mounted on a Cassini-like spacecraft with a sunshade are presented to show a way to mitigate the high temperatures of a Venus flyby. It was predicted that the sunshade can lower the temperature of the ASRG alternator by 20 C for the representative Venus flyby trajectory. The 3D model also was modified to predict generator performance after a single Advanced Stirling Convertor failure. The geometry of the Microtherm HT insulation block on the outboard side was modified to match deformation and shrinkage observed during testing of a prototypic ASRG test fixture by LM. Test conditions and test data were used to correlate the model by adjusting the thermal conductivity of the deformed insulation to match the post-heat-dump steady state temperatures. Results for these conditions showed that the performance of the still-functioning inboard ACS was unaffected.

radioisotope power system↗
DOE OSTI2021

Probing the Magnetosheath Boundaries Using Interstellar Boundary Explorer (IBEX) Orbital Encounters

Inside the magnetosheath, the IBEX-Hi energetic neutral atom (ENA) imager measures a distinct background count rate that is more than 10 times the typical heliospheric ENA emissions observed when IBEX is outside the magnetosheath. The source of this enhancement is magnetosheath ions of solar wind (SW) origin that deflect around the Earth's magnetopause (MP), scatter and neutralize from the anti-sunward part of the IBEX-Hi sunshade, and continue into the instrument as neutral atoms, behaving indistinguishably from ENAs emitted from distant plasma sources. While this background pollutes observations of outer heliospheric ENAs, it provides a clear signature of IBEX crossings over the magnetospheric boundaries. In this study, we investigate IBEX encounters with the magnetosheath boundaries using ~8 yr of orbital data, and we determine the MP and bow shock (BS) locations derived from this background signal. We find 280 BS crossings from X GSE ~ 11 R e to X GSE ~ –36 R e and 241 MP crossings from X GSE ~ 6 R e to X GSE ~ –48 R e . We compare IBEX BS and MP crossing locations to those from IMP-8, Geotail, Cluster, Magion-4, ISEE, and Magnetospheric Multiscale Mission, and we find that IBEX crossing locations overlap with the BS and MP locations inferred from these other data sets. In this paper, we demonstrate how IBEX can be used to identify magnetosheath crossings, and extend boundary observations well past the terminator, thus further constraining future models of magnetosheath boundaries. Furthermore, we use the IBEX data set to show observational evidence of near-Earth magnetotail squeezing during periods of strong interplanetary magnetic field B y .

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Extremely Lightweight Optical Structures for Rapid Deployment

The structures that surround and support optical components play a key role in the performance of the overall optical system. For aerospace applications, creating an opto-mechanical structure that is athermal, lightweight, robust, and can be quickly developed from concept through to hardware is challenging. This project demonstrates a design and fabrication method for optical structures using origami-style folded, photo-etched sheetmetal pieces that are micro-welded to each other or to 3d printed metal components. Thin flexures, critical for athermal mounting of optics, can be thinner with sheetmetal than from standard machining, which leads to more compact designs and the ability to mount smaller optics. Building a structure by starting with the thinnest features, then folding that thin material to make the ''thicker'' sections is the opposite of standard machining (cutting thin features from thicker blocks). A design method is shown with mass savings of >90%, and stiffness to weight ratio improvements of 5x to 10x compared to standard methods for space systems hardware. Designs and processes for small, flexured, actively aligned systems are demonstrated as are methods for producing lightweight, structural, Miura-core sandwich panels in both flat and curved configurations. Concepts for deployable panels and component hinges are explored, as is a lens subcell with tunable piston movement with temperature change and an ultralight sunshade.

42 ENGINEERING↗
NASA NTRS1972

Star sensor/mapper with a self deployable, high-attenuation light shade for SAS-B

A star sensor/mapper to determine positional data for the small astronomy satellites was tested to detect stars of plus 4 visual magnitude. It utilizes two information channels with memory so that it can be used with a low-data-rate telemetry system. One channel yields star amplitude information; the other yields the time of star occurrence as the star passes across an N-slit reticle/photomultiplier detector system. Some of the features of the star sensor/mapper are its low weight of 6.5 pounds, low power consumption of 0.4 watt, bandwidth switching to match the satellite spin rate, optical equalization of sensitivity over the 5-by-10 deg field of view, and self-deployable sunshade. The attitude determination accuracy is 3 arc minutes. This is determined by such parameters as the reticle configuration, optical train, and telemetry readout. The optical and electronic design of the star sensor/mapper, its expansion capabilities, and its features are discussed.

Schenkel, F. W.↗
NASA NTRS1974

Results from computer program for analyzing scattered light suppression systems for large space telescope

A computer program was developed which has the ability to analyze the performance of most light suppression systems so as to predict the amount of scattered light which will reach the image plane for various conditions of unwanted light input from the sun, earth, or moon. This program was used to analyze three different configurations of the large space telescope (LST): an LST with a truncated sunshield, an LST with an extended cylindrical sunshield, and an LST with a conical sunshield which is tilted upwards. The computer program gives the user detailed information as to the paths taken by the unwanted stray light to reach the image plane, and pinpoints those portions of the light suppression system which contribute most of the stray light, so that areas requiring improvements are evident. Certain design guide lines were formulated for any light suppression system selected for the LST, and one which meets these requirements (the tilted sunshade) is described in detail.

Tifft, W. G.↗
NASA NTRS1975

The use of solar simulation systems for producing artificial global radiation for the purpose of determining the heat load of rooms

Certain climatic tests which require solar and sky radiation were carried out in the laboratory by using simulated global radiation. The advantages of such a method of measurement and the possibilities and limitations resulting from the simulation of global radiation are described. Experiments concerning the thermal load in rooms were conducted in order to test the procedure. In particular, the heat gain through a window with sunshade is discussed, a venetian blind between the panes of a double-glazed window being used in most cases.

Kalt, A. C.↗
NASA NTRS1975

The Skylab Parasol

An alternate thermal protection system for the Skylab space station cluster was deemed necessary shortly after launch when severe damage occured to the orbital workshop as it passed through the period of maximum dynamic pressure. Data indicated that the combination micrometeoroid and thermal shield on the sun facing side of the vehicle had been destroyed. The simultaneous design, fabrication, and test of the Skylab Parasol System which was completed in 6 days of around-the-clock effort is described. The Skylab Parasol design was selected as the primary sunshade device based on simplicity of design, ability to fabricate quickly, and early demonstration of a working prototype which featured semiautomatic deployment from within the workshop under shirt sleeve environment conditions.

Kinzler, J. A.↗
NASA NTRS1976

Aerosol size distributions - Remote determination from air-borne measurements of the solar aureole

Aerosol-size distributions were determined remotely using an airborne scanning photometer. This instrument consists of a sunshade, optics, and a large-dynamic-range photodetector-amplifier system that scans about the vertical, recording both the direct attenuated solar beam and the diffuse sky radiance in the almucantar of the sun at an effective wavelength of 0.54 micron. Inversion of the measured radiances determined aerosol radii from approximately 0.2 to 8.0 microns. Data were taken during flights over western Lake Superior and southwestern Wisconsin. Inverted aerosol-size distributions are compared with results obtained by other methods.

Twitty, J. T.↗
NASA NTRS1979

Construction in space - Toward a fresh definition of the man/machine relation

The EVA (extravehicular activity) project forming part of the space construction process is reviewed. The manual EVA constuction, demonstrated by the crew of Skylab 3 by assembling a modest space structure in the form of the twin-pole sunshade, is considered, indicating that the experiment dispelled many doubts about man's ability to execute routine and contingency EVA operations. Tests demonstrating the feasibility of remote teleoperator rendezvous, station keeping, and docking operations, using hand controllers for direct input and television for feedback, are noted. Future plans for designing space construction machines are mentioned.

Watters, H. H.↗
NASA NTRS1980

Contamination control of the Infrared Astronomical Satellite

The Infrared Astronomical Satellite, to be launched in August 1981, will perform an all-sky survey in the 8-120 micron wavelength region. High sensitivity to thermal radiation and the low operating temperature of optics and thermal control surfaces make the IRAS telescope extremely vulnerable to contamination. Four special topics of importance are discussed in this paper: (1) deposition of atmospheric gases; (2) sighting of particles released from the satellite; (3) functions of a deployable aperture cover; and (4) degradation of a radiatively cooled sunshade from spacecraft outgassing. These topics demonstrate how mission strategy, ground cleaning and handling, and hardware design are used to avoid contamination which would degrade telescope performance.

Andreozzi, L. C.↗
NASA NTRS1980

Three-dimensional analysis of charging events on days 87 and 114, 1979, from SCATHA

Angular distributions of ions and electrons from the Spacecraft Charging at High Altitudes (SCATHA) were investigated for the floating potential and the differential charging of the spacecraft as deduced from Liouville's theorem. The following was found: (1) short time charging events on the spacecraft are associated with short time increases of the intensity of 10 keV to 1 MeV electrons; (2) short time changes of the spacecraft differential potential are associated with simultaneous short time changes of the spacecraft floating potential; (3) solar UV intensities in penumbra anticorrelate with the spacecraft floating potentials; (4) NASCAP predicts correct forms of sunshade asymmetric surface potentials; (5) certain enhancements of the intensity of energetic ions diminishes the absolute value of the spacecraft surface potential; (6) spacecraft discharging events in times shorter than 20 sec did not change in the spectrum of the energetic plasma; (7) partial discharging of the spacecraft occurred upon entry into a magnetically depleted region; and (8) steady state potentials and transient potentials of duration less than 30 seconds are simulated by the NASCAP code.

Saflekos, N. A.↗
NASA NTRS1983

Baffle system employing reflective surfaces

Reflective baffles are proposed to reject off-axis light entering a telescope. Toroidal surfaces and adjacent cones are positioned so that off-axis rays make multiple reflections between these two surfaces. Meridional rays are reflected approximately parallel to the entering direction. Skew rays are reflected obliquely, but leave the telescope aperture. The range of incident angles for which these reflections are obtained is approximately 45 deg. A system is described that is designed specifically for the Space Shuttle Infrared Telescope Facility (SIRTF). Because of its reflective properties, the proposed baffle system rejects about 90 deg of the heat load from the SIRTF sunshade that would be absorbed in systems of conventional black baffles.

Linlor, W. I.↗
NASA NTRS1983

Electrically conductive black optical paint

An electrically conductive flat black paint has been developed for use on the Galileo spacecraft which will orbit Jupiter in the late 1980s. The paint, designed for equipment operating in high-energy radiation fields, has multipurpose functions. Its electrical conductivity keeps differential charging of the spacecraft external surfaces and equipment to a minimum, preventing the buildup of electrostatic fields and arcing. Its flat black aspect minimizes the effects of stray light and unwanted reflectances, when used in optical instruments and on sunshades. Its blackness is suitable, also, for thermal control, when the paint is put on spacecraft surfaces. The paint has good adherence properties, as measured by tape tests, when applied properly to a surface. The electrically conductive paint which was developed has the following characteristics: an electrical resistivity of 5 x 10 to the 7th ohms per square; a visual light total reflectance of approximately 5 percent; an infrared reflectance of 0.13 measured over a spectrum from 10 to the (-5.5) power to 0.001 meter; a solar absorptivity, alpha-s, of 0.93, and a thermal emissivity, epsilon, of 0.87, resulting in an alpha-s/epsilon of 1.07. The formula for making the paint and the process for applying it are described.

Birnbaum, M. M.↗
NASA NTRS1986

Study of an all SFHE SIRTF cryogenic system

The Space Infrared Telescope Facility (SIRTF) is a superfluid helium cooled, 85-cm telescope with three infrared instruments at the focal plane. SIRTF will establish in space a long-term-maintainable infrared observatory for the region of 2-700 microns. The cryogenic system can be designed to last up to six years with 1280 kg of superfluid, and can function in either a 28.5 deg or 98 deg inclination orbit by exchanging the sunshade. The lifetime is primarily a function of instrument heat load rather than parasitic heat to the cryogen system.

Urbach, A. R.↗
NASA NTRS1988

Long-term performance of the passive thermal control systems of the IRAS spacecraft

Degradation of passive thermal control systems in space is a matter of serious concern and has been observed in many missions. The performance of the passive thermal control systems of the Infrared Astronomical Satellite (IRAS) over a period of three years is reported here. An exterior temperature of 200 K and a sunshade temperature of approximately 100 K were maintained over this period without significant degradation. The temperature of the telescope contained in the IRAS cryostat was also observed for two years after expenditure of the helium cryogen. It remained at 100 K with no degradation.

Mason, P. V.↗
NASA NTRS1989

Thermal re-design of the Galileo spacecraft for a Venus-earth-earth-gravity assist (VEEGA) trajectory

The cancellation of the Centaur upper stage program in the aftermath of the Challenger tragedy forced a redesign of the flight trajectory of the Galileo spacecraft to Jupiter, i.e., from a direct trajectory to the Venus-earth-earth-gravity-assist (VEEGA) trajectory on the lower energy two-stage inertial upper stage (IUS), with the result that the spacecraft would be exposed to more than twofold increase in peak solar irradiance. This paper describes the general system-level thermal redesign effort for the Galileo spacecraft, from the start of feasibility studies to its final implementation. Results indicate that the addition of sunshades and the generous utilization of second-surface aluminized Kapton surface material for reflecting high percentages of incident solar irradiation would 'harden' the spacecraft's existing thermal protection system adequately, provided that sun-pointing at the relatively higher solar irradiance levels could be maintained. The final miximum flight temperature predictions for the spacecraft's subsystem thermal designs are given.

Reeve, R.↗
NASA NTRS1990

Concepts and analysis for precision segmented reflector and feed support structures

Several issues surrounding the design of a large (20-meter diameter) Precision Segmented Reflector are investigated. The concerns include development of a reflector support truss geometry that will permit deployment into the required doubly-curved shape without significant member strains. For deployable and erectable reflector support trusses, the reduction of structural redundancy was analyzed to achieve reduced weight and complexity for the designs. The stiffness and accuracy of such reduced member trusses, however, were found to be affected to a degree that is unexpected. The Precision Segmented Reflector designs were developed with performance requirements that represent the Reflector application. A novel deployable sunshade concept was developed, and a detailed parametric study of various feed support structural concepts was performed. The results of the detailed study reveal what may be the most desirable feed support structure geometry for Precision Segmented Reflector/Large Deployable Reflector applications.

Miller, Richard K.↗
NASA NTRS1990

A ten-meter optical telescope for deep-space communications

Optical communications using laser light in the visible spectral range is being considered for future deep-space missions. Such a system will require a large telescope in earth vicinity to be used as a receiving station for data return from the spacecraft. A preliminary discussion for a ground-based receiving station consisting of a 10-meter hexagonally segmented primary with high surface tolerance and a unique sunshade is presented.

Shaik, Kamran↗