Search NASA⌕ Search

SEARCH · Search NASA

Results for “super controller”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Fuel cells, batteries and super-capacitors stand-alone power systems management using optimal/flatness based-control

In this work, an optimal control (under constraints) based on the Pontryagin’s maximum principle is used to optimally manage energy flows in a basic PEM (Proton Exchange Membrane) fuel cells system associated to lithium-ion batteries and supercapacitors through a common DC bus having a voltage to stabilize using the differential flatness approach. The adaptation of voltage levels between different sources and load is ensured by use of three DC-DC converters, one boost connected to the PEM fuel cells, while the two others are buck/boost and connected to the lithiumion batteries and supercapacitors. The aim of this paper is to develop an energy management strategy that is able to satisfy the following objectives: Impose the power requested by a habitat (representing the load) according to a proposed daily consumption profile, Keep fuel cells working at optimal power delivery conditions, Maintain constant voltage across the common DC bus, Stabilize the batteries voltage and stored quantity of charge at desired values given by the optimal control. Results obtained under MATLAB/Simulink environment prove that the cited objectives are satisfied, validating then, effectiveness and complementarity between the optimal and flatness concepts proposed for energy management. Note that this study is currently in experimentally validation within MSE Laboratory.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Validation of the U.S. NRC coupled code system TRITON/TRACE/PARCS with the special power excursion reactor test III (SPERT III)

The Special Power Excursion Reactor Test III (SPERT III) was a series of reactivity insertion experiments conducted in the 1950's. This paper describes the validation of the U.S. NRC Coupled Code system TRITON/PARCS/TRACE to simulate reactivity insertion accidents (RIA) by using several of the SPERT III tests. The work here used the SPERT III E-core configuration tests in which the RIA was initiated by ejecting a control rod. The resulting super-prompt reactivity excursion and negative reactivity feedback produced the familiar bell shaped power increase and decrease. The energy deposition during such a power peak has important safety consequences and provides validation basis for core coupled multi-physics codes. The transients of five separate tests are used to benchmark the PARCS/TRACE coupled code. The models were thoroughly validated using the original experiment documentation. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A gedankenexperiment for anomalous diffusion in a charge-fluctuating dusty plasma

Brownian motion with Gaussian-distributed step-sizes is the prototype of diffusive processes with the typical scaling of the mean-square displacement linear with time. There are, however, processes scaling slower or faster in time due to differently (e.g., power-law) distributed step-sizes, commonly referred to as sub- and superdiffusion, respectively. We address the question whether there is actually a physical reason for a discrimination between normal and anomalous diffusion or whether such processes can be regarded as a special case of normal diffusion with a complicated space- and time-dependent diffusion coefficient. In order to get to the bottom of this question, we construct a numerical gedankenexperiment, which is designed to be as simple as possible and consists of dust particles embedded as test particles into a homogeneous magnetic field that randomly changes their charge. The only parameter governing the system is the ratio of the time-scales for gyration and for recharging. By performing full-orbit simulations of such particles, we are for the first time able to (i) describe a system exhibiting sub-, normal, or superdiffusion as an asymptotic behavior, i.e., not merely as an intermediate state during the evolution of the system. We (ii) observe superdiffusion for low values of the controlling parameter, normal diffusion over a wide plateau of intermediate values, and subdiffusion for high values, i.e., we found (iii) a simple system with one single and illustrative parameter controlling whether the system exhibits super-, normal, or subdiffusion. The crucial point is (iv) a competition between ballistic (particles uncharged, extreme superdiffusion) and confined (charged, extreme subdiffusion) motions. Our system is homogeneous in space and time, so that its (v) behavior cannot be described by normal diffusion with a special diffusion coefficient, and the competition is (vi) fundamentally different from a Gaussian random walk and may be regarded as one possible prototype of anomalous diffusion. We discuss briefly possible implications to space and astrophysical dusty plasma. In particular, we show that in a plasma with polydisperse dust particles, a superposition of the three regimes of the anomalous diffusion can simultaneously come into play.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Innovative Technologies for Optical Detection of Stress Corrosion Cracks

Stress corrosion cracks (SCC) represent a major concern for the structural integrity of engineered metal structures. In hazardous or restricted-access environments, remote detection of corrosion or SCC frequently relies on visual methods; however, with standard VT-1 visual inspection techniques, probabilities of SCC detection are low. Here, we develop and evaluate an improved optical sensor for SCC in restricted access-environments by combining a robotically controlled camera/fiber-optic based probe with software-based super-resolution imaging (SRI) techniques to increase image quality and detection of SCC. SRI techniques combine multiple images taken at different viewing angles, locations, or rotations, to produce a single higher- resolution composite image. We have created and tested an imaging system and algorithms for combining optimized, controlled camera movements and super- resolution imaging, improving SCC detection probabilities, and potentially revolutionizing techniques for remote visual inspections of any type.

36 MATERIALS SCIENCE↗

2008 Multiphoton Processes Gordon Research Conferences - June 8-13, 2008

In 2008 the Gordon Research Conference on Multiphoton Processes is held for the 14th time. The meeting continues to evolve as it embraces both the rapid technological and intellectual growth in the field as well as the multi-disciplinary expertise of the participants. This time the sessions will focus on: (1) Attosecond Science; (2) Free-electron laser experiments and theory; (3) Ultrafast dynamics of molecules; (4) Laser control of molecules; (5) Ultrafast imaging; (6) Super-high intensity and x-rays; (7) Strong field processes in molecules; and (8) Control atoms with light and vice versa. The scientific program will blur traditional disciplinary boundaries as the presenters and discussion leaders involve chemists, physicists, and optical engineers, representing both experiment and theory. The broad range of expertise and different perspectives of attendees should provide a stimulating and unique environment for solving problems and developing new ideas in this rapidly evolving field.

99 GENERAL AND MISCELLANEOUS↗

Local rollback for fault-tolerance in parallel computing systems

A control logic device performs a local rollback in a parallel super computing system. The super computing system includes at least one cache memory device. The control logic device determines a local rollback interval. The control logic device runs at least one instruction in the local rollback interval. The control logic device evaluates whether an unrecoverable condition occurs while running the at least one instruction during the local rollback interval. The control logic device checks whether an error occurs during the local rollback. The control logic device restarts the local rollback interval if the error occurs and the unrecoverable condition does not occur during the local rollback interval.

97 MATHEMATICS AND COMPUTING↗

Utilization of Supercapacitors in Adaptive Protection Applications for Resiliency against Communication Failures: A Size and Cost Optimization Case Study

Microgrids’ adaptive protection techniques rely on communication signals from the point of common coupling to ad- just the corresponding relays’ settings for either grid-connected or islanded modes of operation. However, during communication out- ages or in the event of a cyberattack, relays settings are not changed. Thus adaptive protection schemes are rendered unsuc- cessful. Due to their fast response, supercapacitors, which are pre- sent in the microgrid to feed pulse loads, could also be utilized to enhance the resiliency of adaptive protection schemes to communi- cation outages. Proper sizing of the supercapacitors is therefore im- portant in order to maintain a stable system operation and also reg- ulate the protection scheme’s cost. This paper presents a two-level optimization scheme for minimizing the supercapacitor size along with optimizing its controllers’ parameters. The latter will lead to a reduction of the supercapacitor fault current contribution and an increase in that of other AC resources in the microgrid in the ex- treme case of having a fault occurring simultaneously with a pulse load. It was also shown that the size of the supercapacitor can be reduced if the pulse load is temporary disconnected during the transient fault period. Simulations showed that the resulting super- capacitor size and the optimized controller parameters from the proposed two-level optimization scheme were feeding enough fault currents for different types of faults and minimizing the cost of the protection scheme.

25 ENERGY STORAGE↗

Controlling crystal-electric field levels through symmetry-breaking uniaxial pressure in a cubic super heavy fermion

Abstract YbPtBi is one of the heavy-fermion systems with largest Sommerfeld coefficient γ and is thus classified as a ‘super’-heavy fermion material. In this work, we resolve the long-debated question about the hierarchy of relevant energy scales, such as crystal-electric field (CEF) levels, Kondo and magnetic ordering temperature, in YbPtBi. Through measurements of the a.c. elastocaloric effect and generic symmetry arguments, we identify an elastic level splitting that is unambiguously associated with the symmetry-allowed splitting of a quartet CEF level. This quartet, which we identify to be the first excited state at Δ/ k B ≈ 1.6 K above the doublet ground state at ambient pressure, is well below the proposed Kondo temperature T K ≈ 10 K. Consequently, this analysis of the energy scheme can provide support models that predict that the heavy electron mass is a result of an enhanced degeneracy of the CEF ground state, i.e., a quasi-sextet in YbPtBi. At the same time, our study shows the potential of the a.c. elastocaloric effect to control and quantify strain-induced changes of the CEF schemes, opening a different route to disentangle the CEF energy scales from other relevant energy scales in correlated quantum materials.

36 MATERIALS SCIENCE↗

Modeling the Behaviour of an Advanced Material Based Smart Landing Gear System for Aerospace Vehicles

The last two decades have seen a substantial rise in the use of advanced materials such as polymer composites for aerospace structural applications. In more recent years there has been a concerted effort to integrate materials, which mimic biological functions (referred to as smart materials) with polymeric composites. Prominent among smart materials are shape memory alloys, which possess both actuating and sensory functions that can be realized simultaneously. The proper characterization and modeling of advanced and smart materials holds the key to the design and development of efficient smart devices/systems. This paper focuses on the material characterization; modeling and validation of the model in relation to the development of a Shape Memory Alloy (SMA) based smart landing gear (with high energy dissipation features) for a semi rigid radio controlled airship (RC-blimp). The Super Elastic (SE) SMA element is configured in such a way that it is forced into a tensile mode of high elastic deformation. The smart landing gear comprises of a landing beam, an arch and a super elastic Nickel-Titanium (Ni-Ti) SMA element. The landing gear is primarily made of polymer carbon composites, which possess high specific stiffness and high specific strength compared to conventional materials, and are therefore ideally suited for the design and development of an efficient skid landing gear system with good energy dissipation characteristics. The development of the smart landing gear in relation to a conventional metal landing gear design is also dealt with.

36 MATERIALS SCIENCE↗

Electronic and mechanical properties of hybrid graphene/h-BN nanoribbons

The electronic and mechanical properties of one-dimensional super lattice which are composed of controlled domain size of graphene and h-BN nanoribbons with saturated and unsaturated edges are studied by means of the first-principles method. The results show that the studied zigzag- nanoribbons (Z-GBNNR) with unsaturated edges are half-metallic, while they transform into non-magnetic semiconductor on hydrogen passivations. On the other hand the band-gap of armchair-edges nanoribbons (A-GBNNR) get enhanced by the edges saturation. Furthermore, unsaturated edges A-GBNNR and saturated edges Z-GBNNR are found mechanically more stable. These results provide a fingerprint for their use in spintronics and electronics devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Intensity dependent waiting time for strong electron trapping events in speckle stimulated raman scatter

The onset of Stimulated Raman scatter from an intense laser speckle is the simplest experimentally realizable laser-plasma-interaction environment. Despite this data and recent 3D particle simulations, the controlling mechanism at the onset of backscatter in the kinetic regime when strong electron trapping in the daughter Langmuir wave is a dominant nonlinearity is not understood. This paper explores the consequences of assuming that onset is controlled by large thermal fluctuations. A super exponential dependence of mean reflectivity on speckle intensity in the onset regime is predicted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Physical control oriented model of large scale refrigerators to synthesize advanced control schemes. Design, validation, and first control results

In this paper, a physical method to obtain control-oriented dynamical models of large scale cryogenic refrigerators is proposed, in order to synthesize model-based advanced control schemes. These schemes aim to replace classical user experience designed approaches usually based on many independent PI controllers. This is particularly useful in the case where cryoplants are submitted to large pulsed thermal loads, expected to take place in the cryogenic cooling systems of future fusion reactors such as the International Thermonuclear Experimental Reactor (ITER) or the Japan Torus-60 Super Advanced Fusion Experiment (JT-60SA). Advanced control schemes lead to a better perturbation immunity and rejection, to offer a safer utilization of cryoplants. The paper gives details on how basic components used in the field of large scale helium refrigeration (especially those present on the 400W @1.8K helium test facility at CEA-Grenoble) are modeled and assembled to obtain the complete dynamic description of controllable subsystems of the refrigerator (controllable subsystems are namely the Joule-Thompson Cycle, the Brayton Cycle, the Liquid Nitrogen Precooling Unit and the Warm Compression Station). The complete 400W @1.8K (in the 400W @4.4K configuration) helium test facility model is then validated against experimental data and the optimal control of both the Joule-Thompson valve and the turbine valve is proposed, to stabilize the plant under highly variable thermals loads. This work is partially supported through the European Fusion Development Agreement (EFDA) Goal Oriented Training Program, task agreement WP10-GOT-GIRO.

42 ENGINEERING↗

The membrane periodic skeleton is an actomyosin network that regulates axonal diameter and conduction

Neurons have a membrane periodic skeleton (MPS) composed of actin rings interconnected by spectrin. Here, combining chemical and genetic gain- and loss-of-function assays, we show that in rat hippocampal neurons the MPS is an actomyosin network that controls axonal expansion and contraction. Using super-resolution microscopy, we analyzed the localization of axonal non-muscle myosin II (NMII). We show that active NMII light chains are colocalized with actin rings and organized in a circular periodic manner throughout the axon shaft. In contrast, NMII heavy chains are mostly positioned along the longitudinal axonal axis, being able to crosslink adjacent rings. NMII filaments can play contractile or scaffolding roles determined by their position relative to actin rings and activation state. We also show that MPS destabilization through NMII inactivation affects axonal electrophysiology, increasing action potential conduction velocity. In summary, our findings open new perspectives on axon diameter regulation, with important implications in neuronal biology.

Costa, Ana Rita↗

Tailoring Electron-Photon Interaction in Active 3D Photonic-Crystal Architectures

A photonic-crystal is an artificially engineered periodic structure. It is often referred to as an “optical semiconductor” due to its unparallel capability to mold the flow-of-light on-chip, not only in plane (the x-y plane) but also along the third direction. Examples of the unique 3D control-of-light include diffraction less light-guiding, slow light, super prism, negative refraction and high-Q cavity. A new research frontier exists in which the concept of complete control-of-light is utilized to facilitate and maximize electron-photon interaction. The close proximity and strong interaction between a photonic-crystal and an electronic medium can lead to new optoelectronic properties not easily attainable by other means. In this program, we will study this new class of active photonic-crystal and to achieve improved device performances and basic discoveries. Under this program, the PI has made significant progress in the following areas: (i) We have maximized light trapping and absorption by a 3D simple-cubic photonic-crystal; By advancing the concept of simple-cubic symmetry design, we have successfully designed a super thin-film architecture for high efficiency, crystalline silicon solar cells; Most recently, we have provided a theoretical roadmap for thin-film silicon solar cells with 30% power conversion efficiency. (ii) In the modification of thermal radiation area, we have observed quasi- optical coherence in thermal radiation from a 3D metallic photonic-crystal; Furthermore, we have made a direct confirmation of super-Planckian radiation a tungsten photonic-crystal; (iii) We have made simultaneous observation of a large light diffraction-efficiency, 82%, and efficiency enhancement by a volume hologram material (PQ-PMMA) for solar concentration application. (iv) we have also successfully fabricated a 3D metal-oxide photonic crystal. We demonstrated that this TiO 2 photonic crystal can achieve an effectively infinite optical path-length created using a simple-cubic photonic crystal for extreme light trapping.

36 MATERIALS SCIENCE↗

The ionic liquid 1-octyl-3-methylimidazolium (M8OI) is an activator of the human estrogen receptor alpha

Highlights: • M8OI activates the human ERα and induces TFF1 in MCF7 cells. • M8OI is a super-activator of the mouse ERβ variant 2 receptor. • M8OI does not activate the human ERβ. Recent environmental sampling around a landfill site in the UK demonstrated that unidentified xenoestrogens were present at higher levels than control sites; that these xenoestrogens were capable of super-activating (resisting ligand-dependent antagonism) the murine variant 2 ERβ and that the ionic liquid 1-octyl-3-methylimidazolium chloride (M8OI) was present in some samples. To determine whether M8OI was a contributor to the xenoestrogen pool in the soils, activation of human estrogen receptors by M8OI was examined. M8OI activated the human ERα in MCF7 cells in a dose-response manner. These effects were inhibited by the ER antagonist ICI182780; occurred in the absence of any metabolism of M8OI and were confirmed on examination of ER-dependent induction of trefoil factor 1 mRNA in MCF7 cells. M8OI also super-activated the murine variant 2 ERβ in a murine hepatopancreatobiliary cell line. The human ERβ was not activated by M8OI when expressed in HEK293 cells. These data demonstrate that M8OI is a xenoestrogen capable of activating the human ERα and super-activating the murine variant 2 ERβ.

60 APPLIED LIFE SCIENCES↗

Numerical simulations of turbulent molecular clouds regulated by reprocessed radiation feedback from nascent super star clusters

Radiation feedback from young star clusters embedded in giant molecular clouds (GMCs) is believed to be important to the control of star formation. For the most massive and dense clouds, including those in which super star clusters (SSCs) are born, pressure from reprocessed radiation exerted on dust grains may disperse a significant portion of the cloud mass back into the interstellar medium. Using our radiation hydrodynamics code, Hyperion, we conduct a series of numerical simulations to test this idea. Our models follow the evolution of self-gravitating, strongly turbulent clouds in which collapsing regions are replaced by radiating sink particles representing stellar clusters. We evaluate the dependence of the star formation efficiency (SFE) on the size and mass of the cloud and κ, the opacity of the gas to infrared (IR) radiation. We find that the single most important parameter determining the evolutionary outcome is κ, with κ≳15 cm{sup 2} g{sup −1} needed to disrupt clouds. For κ=20−40 cm{sup 2} g{sup −1}, the resulting SFE = 50%−70% is similar to empirical estimates for some SSC-forming clouds. The opacities required for GMC disruption likely apply only in dust-enriched environments. We find that the subgrid model approach of boosting the direct radiation force L/c by a “trapping factor” equal to a cloud’s mean IR optical depth can overestimate the true radiation force by factors of ∼4−5. We conclude that feedback from reprocessed IR radiation alone is unlikely to significantly reduce star formation within GMCs unless their dust abundances or cluster light-to-mass ratios are enhanced.

79 ASTRONOMY AND ASTROPHYSICS↗

Planet traps and planetary cores: origins of the planet-metallicity correlation

Massive exoplanets are observed preferentially around high metallicity ([Fe/H]) stars while low-mass exoplanets do not show such an effect. This so-called planet-metallicity correlation generally favors the idea that most observed gas giants at r < 10 AU are formed via a core accretion process. We investigate the origin of this phenomenon using a semi-analytical model, wherein the standard core accretion takes place at planet traps in protostellar disks where rapid type I migrators are halted. We focus on the three major exoplanetary populations—hot Jupiters, exo-Jupiters located at r ≅ 1 AU, and the low-mass planets. We show using a statistical approach that the planet-metallicity correlations are well reproduced in these models. We find that there are specific transition metallicities with values [Fe/H] = –0.2 to –0.4, below which the low-mass population dominates, and above which the Jovian populations take over. The exo-Jupiters significantly exceed the hot Jupiter population at all observed metallicities. The low-mass planets formed via the core accretion are insensitive to metallicity, which may account for a large fraction of the observed super-Earths and hot-Neptunes. Finally, a controlling factor in building massive planets is the critical mass of planetary cores (M {sub c,} {sub crit}) that regulates the onset of rapid gas accretion. Assuming the current data is roughly complete at [Fe/H] > –0.6, our models predict that the most likely value of the 'mean' critical core mass of Jovian planets is (M {sub c,} {sub crit}) ≅ 5 M {sub ⊕} rather than 10 M {sub ⊕}. This implies that grain opacities in accreting envelopes should be reduced in order to lower M {sub c,} {sub crit}.

79 ASTRONOMY AND ASTROPHYSICS↗