SEARCH · Search NASA

Results for “surface level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1994

Tectonic and climatic significance of a late Eocene low-relief, high-level geomorphic surface, Colorado

New paleobotanical data suggest that in the late Eocene the erosion surface which capped the Front Range, Colorado was 2.2-2.3 km in elevation, which is similar to the 2.5-km present elevation of surface remnants. This estimated elevation casts doubt on the conventional belief that the low-relief geomorphic surface was formed by lateral planation of streams to a base level not much higher than sea level and that the present deeply incised canyons must represent Neogene uplift of Colorado. Description of the surface, calculations of sediment volume, and isostatic balance and fluvial landsculpting models demonstrate that while the high elevation of the erosion surface was due to tectonic forces, its smoothness was mostly a result of climatic factors. A sediment balance calculated for the Front Range suggests that from 2 to 4 km of material were eroded by the late Eocene, consistent with fission track ages. This amount of erosion would remove a significant portionof the 7 km of Laramide upper crustal thickening. Isostatic modeling implies that the 2.2-3.3 km elevation was most likely created by lower crustal thickening during the Laramide. A numerical model of fluvial erosion and deposition suggests a way that a late Eocene surface could have formed at this high elevation without incision. A humid climate with a preponderance of small storm events will diffusively smooth topography and is a possible mechanism for formation oflow-relief, high-level surfaces. Paleoclimate models suggest a lack of large strom events in the late Eocene because of cool sea surface temperatures in the equatorial region. Return to a drier but stormier climate post-Eocene could have caused the incision of the surface by young canyons. By this interpretation, regional erosion surfaces may represent regional climatic rather than tectonic conditions.

Gregory, Kathryn M.↗

NASA NTRS1999

Level 2 Surface Retrieval Algorithm Theoertical Basis

This Algorithm Theoretical Basis (ATB) document describes the algorithms used to retrieve the surface parameters of the MISR Level 2 Aerosol/Surface Product.

surface algorithm theoretical retrieval↗

NASA NTRS1977

Experimental measurements of the ground cloud effluents and cloud growth for the May 20, 1975, Titan 3C launch at Air Force Eastern Test Range, Florida

The experiment included surface level and airborne in situ cloud measurements of the exhaust effluents from the Titan IIIC solid rocket boosters. Simultaneous visible spectrum photographic pictures of the ground cloud as well as infrared imaging of the cloud were obtained to study the cloud rise, growth, and direction of travel within the earth's surface mixing layer. The NASA multilayer diffusion model predictions of cloud growth, direction of travel, and expected surface level effluent concentrations were made prior to launch and after launch using measured meteorological conditions. Prelaunch predictions were used to position the effluent monitoring instruments, and the postlaunch predictions were compared with the measured data. Measurement results showed that surface level effluent values were low, often below the detection limits of the instrumentation. The maximum surface level hydrogen chloride concentration measured 50 parts per billion at about 8 km from the launch pad. The maximum observed in-cloud (airborne measurement) hydrogen chloride concentration was 7 per million.

Gregory, G. L.↗

NASA NTRS2017

SMAP Level 4 Surface and Root Zone Soil Moisture

The SMAP Level 4 soil moisture (L4_SM) product provides global estimates of surface and root zone soil moisture, along with other land surface variables and their error estimates. These estimates are obtained through assimilation of SMAP brightness temperature observations into the Goddard Earth Observing System (GEOS-5) land surface model. The L4_SM product is provided at 9 km spatial and 3-hourly temporal resolution and with about 2.5 day latency. The soil moisture and temperature estimates in the L4_SM product are validated against in situ observations. The L4_SM product meets the required target uncertainty of 0.04 m(exp. 3)m(exp. -3), measured in terms of unbiased root-mean-square-error, for both surface and root zone soil moisture.

SMAP↗

NASA NTRS2015

Soil Moisture Active Passive (SMAP) Mission Level 4 Surface and Root Zone Soil Moisture (L4_SM) Product Specification Document

This is the Product Specification Document (PSD) for Level 4 Surface and Root Zone Soil Moisture (L4_SM) data for the Science Data System (SDS) of the Soil Moisture Active Passive (SMAP) project. The L4_SM data product provides estimates of land surface conditions based on the assimilation of SMAP observations into a customized version of the NASA Goddard Earth Observing System, Version 5 (GEOS-5) land data assimilation system (LDAS). This document applies to any standard L4_SM data product generated by the SMAP Project. The Soil Moisture Active Passive (SMAP) mission will enhance the accuracy and the resolution of space-based measurements of terrestrial soil moisture and freeze-thaw state. SMAP data products will have a noteworthy impact on multiple relevant and current Earth Science endeavors. These include: Understanding of the processes that link the terrestrial water, the energy and the carbon cycles, Estimations of global water and energy fluxes over the land surfaces, Quantification of the net carbon flux in boreal landscapes Forecast skill of both weather and climate, Predictions and monitoring of natural disasters including floods, landslides and droughts, and Predictions of agricultural productivity. To provide these data, the SMAP mission will deploy a satellite observatory in a near polar, sun synchronous orbit. The observatory will house an L-band radiometer that operates at 1.40 GHz and an L-band radar that operates at 1.26 GHz. The instruments will share a rotating reflector antenna with a 6 meter aperture that scans over a 1000 km swath.

L4-SM↗

NASA NTRS2018

Soil Moisture Active Passive (SMAP) Mission Level 4 Surface and Root Zone Soil Moisture (L4_SM) Product Specification Document

Soil Moisture↗

NASA NTRS2001

The Variability of the Horizontal Circulation in the Troposphere and Stratosphere: A Comparison

The variability of the horizontal circulation in the stratosphere and troposphere of the Northern Hemisphere (NH) is compared by using various approaches. Spatial degrees of freedom (dof) on different time scales were derived. Modes of variability were computed in geopotential height fields at the tropospheric and stratospheric pressure levels by applying multivariate statistical approaches. Features of the spatial and temporal variability of the winterly zonal wind were studied with the help of recurrence and persistence analyses. The geopotential height and zonally-averaged zonal wind at the 50-, 500- and 1000-hPa level are used to investigate the behavior of the horizontal circulation in the lower stratosphere, mid-troposphere and at the near surface level, respectively. It is illustrated that the features of the variability of the horizontal circulation are very similar in the mid-troposphere and at the near surface level. Due to the filtering of tropospheric disturbances by the stratospheric and upper tropospheric zonal mean flow, the variability of the stratospheric circulation exhibits less spatial complexity than the circulation at tropospheric pressure levels. There exist enormous differences in the number of degrees of freedom (or free variability modes) between both atmospheric layers. Results of the analyses clearly show that the concept of a zonally symmetric AO with a simple structure in the troposphere similar to the one in the stratosphere is not valid. It is concluded that the spatially filtered climate change signal can be detected earlier in the stratosphere than in the mid-troposphere or at the near surface level.

Perlwitz, Judith↗

NASA NTRS2010

The SMAP Level 4 Surface and Root-zone Soil Moisture (L4_SM) Product

The Soil Moisture Active and Passive (SMAP) mission is being developed by NASA for launch in 2013 as one of four first-tier missions recommended by the U.S. National Research Council Committee on Earth Science and Applications from Space in 2007. The primary science objectives of SMAP are to enhance understanding of land surface controls on the water, energy and carbon cycles, and to determine their linkages. Moreover, the high resolution soil moisture mapping provided by SMAP has practical applications in weather and seasonal climate prediction, agriculture, human health, drought and flood decision support. In this paper we describe the assimilation of SMAP observations for the generation of the planned SMAP Level 4 Surface and Root-zone Soil Moisture (L4_SM) product. The SMAP mission makes simultaneous active (radar) and passive (radiometer) measurements in the 1.26-1.43 GHz range (L-band) from a sun-synchronous low-earth orbit. Measurements will be obtained across a 1000 km wide swath using conical scanning at a constant incidence angle (40 deg). The radar resolution varies from 1-3 km over the outer 70% of the swath to about 30 km near the center of the swath. The radiometer resolution is 40 km across the entire swath. The radiometer measurements will allow high-accuracy but coarse resolution (40 km) measurements. The radar measurements will add significantly higher resolution information. The radar is however very sensitive to surface roughness and vegetation structure. The combination of the two measurements allows optimal blending of the advantages of each instrument. SMAP directly observes only surface soil moisture (in the top 5 cm of the soil column). Several of the key applications targeted by SMAP, however, require knowledge of root zone soil moisture (approximately top 1 m of the soil column), which is not directly measured by SMAP. The foremost objective of the SMAP L4_SM product is to fill this gap and provide estimates of root zone soil moisture that are informed by and consistent with SMAP observations. Such estimates are obtained by merging SMAP observations with estimates from a land surface model in a soil moisture data assimilation system. The land surface model component of the assimilation system is driven with observations-based surface meteorological forcing data, including precipitation, which is the most important driver for soil moisture. The model also encapsulates knowledge of key land surface processes, including the vertical transfer of soil moisture between the surface and root zone reservoirs. Finally, the model interpolates and extrapolates SMAP observations in time and in space. The L4_SM product thus provides a comprehensive and consistent picture of land surface hydrological conditions based on SMAP observations and complementary information from a variety of sources. The assimilation algorithm considers the respective uncertainties of each component and yields a product that is superior to satellite or model data alone. Error estimates for the L4_SM product are generated as a by-product of the data assimilation system.

Reichle, Rolf↗

NASA NTRS1992

A domain-specific design architecture for composite material design and aircraft part redesign

Advanced composites have been targeted as a 'leapfrog' technology that would provide a unique global competitive position for U.S. industry. Composites are unique in the requirements for an integrated approach to designing, manufacturing, and marketing of products developed utilizing the new materials of construction. Numerous studies extending across the entire economic spectrum of the United States from aerospace to military to durable goods have identified composites as a 'key' technology. In general there have been two approaches to composite construction: build models of a given composite materials, then determine characteristics of the material via numerical simulation and empirical testing; and experience-directed construction of fabrication plans for building composites with given properties. The first route sets a goal to capture basic understanding of a device (the composite) by use of a rigorous mathematical model; the second attempts to capture the expertise about the process of fabricating a composite (to date) at a surface level typically expressed in a rule based system. From an AI perspective, these two research lines are attacking distinctly different problems, and both tracks have current limitations. The mathematical modeling approach has yielded a wealth of data but a large number of simplifying assumptions are needed to make numerical simulation tractable. Likewise, although surface level expertise about how to build a particular composite may yield important results, recent trends in the KBS area are towards augmenting surface level problem solving with deeper level knowledge. Many of the relative advantages of composites, e.g., the strength:weight ratio, is most prominent when the entire component is designed as a unitary piece. The bottleneck in undertaking such unitary design lies in the difficulty of the re-design task. Designing the fabrication protocols for a complex-shaped, thick section composite are currently very difficult. It is in fact this difficulty that our research will address.

Punch, W. F., III↗

NASA NTRS1994

Infrared spectroscopic measurements of the total column abundance of ethan (C2H6) above Lauder, New Zealand

Total vertical column aboundances of atmospheric ethane (C2H6) have been retrieved form more than 350 high-resolution infrared solar spectra recorded on 129 days between December 1992 and March 1994 at the Network for the Detection of Stratospheric Change (NDSC) station in Lauder, New Zealand (latitude 45.04 deg S, 169.68 deg E, 0.37 km altitude). The results are based on nonlinear least squares fits to narrow spectral intervals containing the unresolved C2H6 nu (sub 7) band (P)Q(sub 3) and (R)Q(sub 0) subbranches at 2976.8 and 2986.7/cm. The measured Lauder column abundances show a pronounced seasonal cycle with a maximum value of (8.6 +/- 0.5) x 10(exp 15) molecules/sq cm in September and a minimum value of (3.8 +/- 0.5) x 10 (exp 15) molecules/sq cm in February. Assuming a realistic vertical distribution for C2H6, these values correspond to surface level volume-mixing ratios of 0.52 and 0.23 ppbv (parts per billion by volume), respectively. The phase and relative amplitude of the Lauder C2H6 seasonal cycle are similar to corresponding values determined from infrared measurements at the Jungfraujoch (46.55 deg N, 7.98 deg E, 3.58 km altitude) and Mauna Loa (latitude 19.5 deg N, longitude 155.6 deg W, 3.5 km altitude) NDSC stations, but the inferred absolute magnitudes of the Lauder surface level mixing ratios during the same season are significantly lower. The Lauder C2H6 measurements are also compared with published southern hemisphere surface level sampling measurements and two-dimensional model calculations.

Rinsland, Curtis P.↗

NASA NTRS2012

Assimilation of Smos Observations to Generate a Prototype SMAP Level 4 Surface and Root-Zone Soil Moisture Product

The Soil Moisture Active and Passive (SMAP; [1]) mission is being implemented by NASA for launch in October 2014. The primary science objectives of SMAP are to enhance understanding of land surface controls on the water, energy and carbon cycles, and to determine their linkages. Moreover, the high-resolution soil moisture mapping provided by SMAP has practical applications in weather and seasonal climate prediction, agriculture, human health, drought and flood decision support. The Soil Moisture and Ocean Salinity (SMOS; [2]) mission was launched by ESA in November 2009 and has since been observing L-band (1.4 GHz) upwelling passive microwaves. In this paper we describe our use of SMOS brightness temperature observations to generate a prototype of the planned SMAP Level 4 Surface and Root-zone Soil Moisture (L4_SM) product [5].

Reichle, Rolf H.↗

NASA NTRS2021

The benefit of brightness temperature assimilation for the SMAP Level-4 surface and root-zone soil moisture analysis

The Soil Moisture Active Passive (SMAP) Level-4 (L4) product provides global estimates of surface soil moisture (SSM) and root-zone soil moisture (RZSM) via the assimilation of SMAP brightness temperature (Tb) observations into the NASA Catchment Land Surface Model (CLSM). Here, using in situ measurements from 2474 sites in China, we evaluate the performance of soil moisture estimates from the L4 data assimilation (DA) system and from a baseline “open-loop” (OL) simulation of CLSM without Tb assimilation. Using random forest regression, the efficiency of the L4 DA system (i.e., the performance improvement in DA relative to OL) is attributed to eight control factors related to the CLSM as well as τ–ω radiative transfer model (RTM) components of the L4 system. Results show that the Spearman rank correlation (R) for L4 SSM with in situ measurements increases for 77 % of the in situ measurement locations (relative to that of OL), with an average R increase of approximately 14 % (ΔR=0.056). RZSM skill is improved for about 74 % of the in situ measurement locations, but the average R increase for RZSM is only 7 % (ΔR=0.034). Results further show that the SSM DA skill improvement is most strongly related to the difference between the RTM-simulated Tb and the SMAP Tb observation, followed by the error in precipitation forcing data and estimated microwave soil roughness parameter h. For the RZSM DA skill improvement, these three dominant control factors remain the same, although the importance of soil roughness exceeds that of the Tb simulation error, as the soil roughness strongly affects the ingestion of DA increments and further propagation to the subsurface. For the skill of the L4 and OL estimates themselves, the top two control factors are the precipitation error and the SSM–RZSM coupling strength error, both of which are related to the CLSM component of the L4 system. Finally, we find that the L4 system can effectively filter out errors in precipitation. Therefore, future development of the L4 system should focus on improving the characterization of the SSM–RZSM coupling strength.

Jianxiu Qiu↗

NASA NTRS1990

Rotatable crucible for rapid solidification process

This invention relates to an apparatus for producing filament, fiber, ribbon or film from a molten material, comprising a preferably heat extracting crucible which contains a pool of molten material at a selected horizontal level in the pool. The crucible has an opening extending from above the free surface level to a bottom edge of the opening, the bottom edge being sufficiently below the free surface level so that the molten material cannot form and hold a meniscus by surface tension between the edge and the level of the free surface and further comprises a heat extracting substrate laterally disposed with respect to the crucible and which rotates about an axis of rotation. The substrate is positioned adjacent the edge of the opening which confines the molten material and prevents it from overflowing downwardly out of the crucible. The invention features rotating means which includes a first drive means for tiltably rotating the crucible about an axis of rotation which is coaxial with the axis of rotation of the substrate, so the crucible edge can be maintained a predetermined constant distance from the substrate. The distance chosen is suitable for depositing molten material on the substrate and the apparatus also has a second drive means which is drivingly connected to the substrate for continuously moving the surface of the substrate upwardly past the edge and a melt front formed at the interface of the molten material and the substrate surface.

Gaspar, Thomas↗

NASA NTRS2016

Impact of the 2008 Global Recession on Air Quality over the United States: Implications for Surface Ozone Levels from Changes in NOx Emissions

Satellite and ground observations detected large variability in nitrogen oxides (NOx) during the 2008 economic recession, but the impact of the recession on air quality has not been quantified. This study combines observed NOx trends and a regional chemical transport model to quantify the impact of the recession on surface ozone (O3) levels over the continental United States. The impact is quantified by simulating O3 concentrations under two emission scenarios: business-as-usual (BAU) and recession. In the BAU case, the emission projection from the Cross-State Air Pollution Rule is used to estimate the would-be NOx emission level in 2011. In the recession case, the actual NO2 trends observed from Air Quality System ground monitors and the Ozone Monitoring Instrument on the Aura satellite are used to obtain realistic changes in NOx emissions. The model prediction with the recession effect agrees better with ground O3 observations over time and space than the prediction with the BAU emission. The results show that the recession caused a 12ppbv decrease in surface O3 concentration over the eastern United States, a slight increase (0.51ppbv) over the Rocky Mountain region, and mixed changes in the Pacific West. The gain in air quality benefits during the recession, however, could be quickly offset by the much slower emission reduction rate during the post-recession period.

NOx emissions↗

NASA NTRS1995

Accuracy of satellite altimeter elevations over the Greenland ice sheet

The accuracy of Geosat satellite altimetry over the Greenland ice sheet is evaluated by comparing the measured heights to radar elevations from the airborne Greenland Aerogeophysics Project. At the center of the ice sheet where the ice surface is nearly level, surface comparisons show a fit at the 1 to 3 m level as expected, but even at moderately sloping ice regions (0.3 deg-0.6 deg), satellite altimetry mean errors in the range of 10 to 35 m are observed. These errors are found for slope-corrected and waveform-retracked data, so most previous accuracy estimates of current satellite altimetry ice sheet elevations in regions of slopping or undulating ice appear to be too optimistic.

Ekholm, Simon↗

NASA NTRS2018

Average Versus High Surface Ozone Levels over the Continental USA: Model Bias, Background Influences, and Interannual Variability

US background ozone (O3) includes O3 produced from anthropogenic O3 precursors emitted outside of the USA, from global methane, and from any natural sources. Using a suite of sensitivity simulations in the GEOS-Chem global chemistry transport model, we estimate the influence from individual background sources versus US anthropogenic sources on total surface O3 over 10 continental US regions from 2004 to 2012. Evaluation with observations reveals model biases of +0-19ppb in seasonal mean maximum daily 8h average (MDA8) O3, highest in summer over the eastern USA. Simulated high-O3 events cluster too late in the season. We link these model biases to excessive regional O3 production (e.g., US anthropogenic, biogenic volatile organic compounds (BVOCs), and soil NOx, emissions), or coincident missing sinks. On the 10 highest observed O3 days during summer (O3_top10obs_JJA), US anthropogenic emissions enhance O3 by 5-11ppb and by less than 2ppb in the eastern versus western USA. The O3 enhancement from BVOC emissions during summer is 1-7 ppb higher on O3_top10obs_JJA days than on average days, while intercontinental pollution is up to 2ppb higher on average versus on O3_top10obs_JJA days. During the summers of 2004-2012, monthly regional mean US background O3 MDA8 levels vary by up to 15ppb from year to year. Observed and simulated summertime total surface O3 levels on O3_top10obs_JJA days decline by 3ppb (averaged over all regions) from 2004-2006 to 2010-2012, reflecting rising US background (+2ppb) and declining US anthropogenic O3 emissions (6ppb) in the model. The model attributes interannual variability in US background O3 on O3_top10obs days to natural sources, not international pollution transport. We find that a 3-year averaging period is not long enough to eliminate interannual variability in background O3 on the highest observed O3 days.

Guo, Jean J.↗

NASA NTRS1994

Geosat-derived sea level and surface current anomalies in the equatorial Pacific during the 1986-1989 El Nino and La Nina

Equatorial wave dynamics are essential in most oceanic models for reproducing aspects of the El Nino-Southern Oscillation (ENSO) phenomenon. Observational evidence of first baroclinic equatorial Kelvin and first symmetric meridional Rossby waves is found in Geosat-derived sea level anomalies (SLA) and surface zonal current anomalies (ZCA) in the equatorial Pacific ocean during the 1986-1987 El Nino and the ensuing 1988-1989 La Nina. This was made possible after extensive quality control and specific processing of the recently improved Geosat geophysical data records pertaining to the 17-day Exact Repeat Mission. In particular, the processing was made so that the Geosat-derived ZCA best fit near-surface zonal currents from three equatorial moorings at 165 deg E, 140 deg W, and 110 deg W. The Geosat-derived SLA and ZCA are decomposed into first baroclinic equatorial Kelvin and gravest Rossby modes. The emphasis is then put on the chronology of the ZCA at the equator where the currents are the most energetic and where Kelvin and first symmetric Rossby waves explain most of the variance in ZCA, in similar proportion. The 1986-1987 El Nino is mostly characterized by a strong downwelling Kelvin wave in December 1986, a series of downwelling Kelvin waves in March-October 1987, and a strong upwelling Rossby wave in March-September 1987. These waves are consistent with wind forcing, and all give rise to notable eastward ZCA for almost an entire year. During El Nino-La Nina transition period there is the occurrence of two downwelling Rossby waves originating from the eastern Pacific at times of favorable wind forcing. These Rossby waves switch the basin-wide ZCA from eastward to westward, terminating the warm event. Then, the 1988-1989 La Nina shows the generation of a series of upwelling Kelvin waves which are clearly identified in March/April and September/October 1988. These upwelling Kelvin waves are apparently related to the enhencement of the trade wind in the western half of the basin. These waves maintain the basin-wide westward ZCA for more than a year, although the ZCA is slightly reduced ba front of upwelling Rossby waves in phase with the normal seasonal cycle. The Kelvin wave forcing and sign of kelvin wave contribution versus Rossby wave contribution to ZCA in the western Pacific are discussed, and we conclude that neither pleads in favor of the delayed action oscillator mechanism.

Delcroix, Thierry↗

NASA NTRS2019

Evaluation of NASA's High-Resolution Global Composition Simulations: Understanding a Pollution Event in the Chesapeake Bay During the Summer 2017 OWLETS Campaign

Recirculation of pollutants due to a bay breeze effect is a key meteorological mechanism impacting air quality near urban coastal areas, but regional and global chemical transport models have historically struggled to capture this phenomenon. We present a case study of a high ozone (O3) episode observed over the Chesapeake Bay during the NASA Ozone Water-Land Environmental Transition Study (OWLETS) in summer 2017. OWLETS included a complementary suite of ground-based and airborne observations, with which we characterize the meteorological and chemical context of this event and develop a framework to evaluate model performance. Two publicly-available NASA global high-resolution coupled chemistry-meteorology models (CCMMs) are investigated: GEOS-CF and MERRA2-GMI. The GEOS-CF R squared value for comparisons between the NASA Sherpa C-23 aircraft measurements to the GEOS-CF resulted in good agreement (R squared: 0.67) on July 19th and fair agreement (R squared: 0.55) for July 20th. Compared to surface observations, we find the GEOS-CF product with a 25 x 25 km squared grid box, at an hourly (R squared: 0.62 to 0.87) and 15-minute (R squared: 0.64 to 0.87) interval for six regional sites outperforms the hourly nominally 50 x 50 km squared gridded MERRA2-GMI (R squared: 0.53 to 0.76) for four of the six sites, suggesting it is better capable of simulating complex chemical and meteorological features associated with ozone transport within the Chesapeake Bay airshed. When the GEOS-CF product was compared to the TOLNet LiDAR observations at both NASA Langley Research Center (LaRC) and the Chesapeake Bay Bridge Tunnel (CBBT), the median differences at LaRC were -6 to 8% and at CBBT were ± 7% between 400 to 2000 m ASL. This indicates that, for this case study, the GEOS-CF is able to simulate surface level ozone diurnal cycles and vertical ozone profiles at small scales between the surface level and 2000 m ASL. Evaluating global chemical model simulations at sub-regional scales will help air quality scientists understand the complex processes occurring at small spatial and temporal scales within complex surface terrain changes, simulating nighttime chemistry and deposition, and the potential to use global chemical transport simulations in support of regional and sub-regional field campaigns.

NASA Ozone Water-Land Environmental Transition Stu↗