Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Effects of aqueous ammonia treatment on fiber’s surface morphology and enzymatic digestibility of empty fruit bunch fiber (EFBF)

This study was conducted to investigate the effects of aqueous ammonia reflux and soaked treatment on the fiber’s surface morphology and enzymatic digestibility of empty fruit bunch fiber (EFBF). The surface morphological changes of the fiber after aqueous ammonia treatment was linked to the sugars yield by enzymatic hydrolysis. The effectiveness of 6.25% aqueous ammonia treatment in improving enzymatic digestibility of EFBF was initially studied in reflux system and by soaking. The results showed that soaked treatment was more effective than reflux system. Further study on soaked treatment of EFBF was carried out by increasing the ammonia concentration to 12.50%. Soaking in aqueous ammonia was conducted at 30°C and 50°C for 24 hours. The results of enzymatic hydrolysis showed that sugar yield from EFBF soaked in 12.50% aqueous ammonia at 50°C was the highest. Approximately 242.91±15.50 mg/g EFBF of xylose and 320.49±28.31 mg/g EFBF of glucose were produced by the action of enzyme Cellic Ctec 2. Results of scanning electron microscopic showed that aqueous ammonia treatment by soaking had caused a more severe structural distortion on the fiber’s surface and higher removal of silica bodies that embedded on the fiber than those in reflux system. The changes on the fiber’s surface morphology were believed is the contributing factor that improved the enzymatic digestibility of EFBF after aqueous ammonia treatment.

60 APPLIED LIFE SCIENCES↗

Comparative Studies of Optoelectronic Properties, Structures, and Surface Morphologies for Phosphorus-Doped Poly-Si/SiOx Passivating Contacts

We investigated and compared optoelectronic properties, crystallographic structures, and nanoscale surface morphologies of ex-situ phosphorus-doped polycrystalline silicon (poly-Si)/SiO x passivating contacts, formed by different deposition methods (sputtering, plasma-enhanced chemical vapour deposition (PECVD), and low-pressure chemical vapour deposition (LPCVD)). Across all these deposition technologies, a similar trend is observed: higher diffusion temperatures yield films that are more crystalline but have rougher surface morphologies due to bigger surface crystal grains. Also, the recrystallization process of the as-deposited Si films starts from the SiO x interface, rather than from the film surface and bulk. However, there are some distinct differences among these technologies. Firstly, the LPCVD method yields the roughest surface and smallest degree of crystallinity on finished poly-Si films. In contrast, the PECVD method has the smoothest surface for both as-deposited Si and annealed poly-Si films. Secondly, as-deposited sputtered and PECVD Si films contain only an amorphous phase whereas as-deposited LPCVD films has already had some crystalline phase. Thirdly, the LPCVD phosphorus in-diffusion into the substrate depends strongly on the initial film thickness, whereas for the other two methods it is weakly dependent on thickness.

crystallographic structures↗

Chemical and physical sputtering effects on the surface morphology of carbon films grown by plasma chemical vapor deposition

We have studied the influence of chemical and physical sputtering on the surface morphology of hydrogenated carbon films deposited on silicon substrates by bias-enhanced electron cyclotron resonance chemical vapor deposition. Atomic force microscopy based power spectrum density (PSD) and roughness analysis have been used to investigate the film morphology. This study has been possible due to the appropriate choice of the experimental variables, in particular, gas mixture, resulting in either nitrogen-free (a-C:H) or nitrogenated carbon (a-CN:H) films, and substrate bias (V{sub b}). Under these conditions, chemical sputtering is present for a-CN:H deposition but it is negligible for a-C:H film growth, while physical sputtering processes appear for both systems for V{sub b}<=-85 V. When physical sputtering does not operate, the film growth with simultaneous chemical sputtering leads to a characteristic a-CN:H granular surface morphology. Furthermore, PSD analysis reveals that a spatial correlation of the a-CN:H film surface roughness, up to distances approx300 nm, becomes a fingerprint of the coexistence of growth and chemical erosion processes on the film morphology. However, once physical sputtering takes place, the influence of chemical sputtering by reactive nitrogen species on the final surface morphology becomes negligible and both a-CN:H and a-C:H film morphologies are ultrasmooth.

36 MATERIALS SCIENCE↗

MSFC Surface Metrology (Surface Morphology)

NASA's Surface Metrology is presented in viewgraph form. The topics include: 1) Facilities/Major Equipment; 2) Taylor Hobson NanoStep II; 3) Topometrix; and 4) Surface Metrology Applications.

Shapiro, Alan P.↗

Understanding the relation between stress and surface morphology in sputtered films: Atomistic simulations and experiments

The relation between stress evolution and surface morphology during deposition of sputtered films is examined by combining kinetic Monte Carlo simulations and stress measurements. We find that the surface morphology is susceptible to an instability, which transforms from layer-by-layer growth to the formation of pillarlike columns. The gaps between these columns prevent complete densification and can lead to a network of pores in the layer. We propose that the formation of this structure changes the stress in the growing layers from compressive to tensile.

36 MATERIALS SCIENCE↗

Interplay of Quantum Size Effect and Tensile Strain on Surface Morphology of β-Sn(100) Islands

The quantum size effect (QSE) and strain effect are two key factors influencing the surface morphology of thin films, which can increase film surface roughness through QSE-induced thickness oscillation and strain-induced island formation, respectively. Surface roughness usually manifests in the early stages of film growth and diminishes beyond a critical thickness. In this work, we employ molecular beam epitaxy (MBE) to grow β-Sn(100) islands with varying thickness N on bilayer graphene-terminated 6H-SiC(0001) substrates. Scanning tunneling microscopy and spectroscopy measurements reveal an inverse surface roughness effect that highlights the interplay of QSE and misfit strain in shaping the surface morphology of β-Sn(100) islands. For N ≤ 10, the islands exhibit flat surfaces, while for N ≥ 26, the island surfaces become corrugated and patterned. For the intermediate range, i.e., 12 ≤ N ≤ 24, both flat and patterned surfaces coexist, with the percentage coverage of the patterned surface oscillating as a function of N. By performing density functional theory calculations, we demonstrate that the unusual surface pattern evolution in our MBE-grown β-Sn(100) islands is a result of the interplay between QSE-induced surface roughing and tensile strain-induced smoothening effect.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of elastic softening and helium accumulation kinetics on surface morphological evolution of plasma-facing tungsten

Based on a continuous-domain model, capable of accessing the spatiotemporal scales relevant to fuzz formation on the surface of plasma-facing component (PFC) tungsten, we report self-consistent simulation results that elucidate the effects of elastic softening and helium (He) accumulation kinetics on the surface morphological response of PFC tungsten. The model accounts for the softening of the elastic moduli in the near-surface region of PFC tungsten, including both thermal softening at high temperature and softening due to He accumulation upon He implantation. The dependence of the elastic moduli on the He content follows an exponential scaling relation predicted by molecular-dynamics simulations, while the He content in the near-surface region of PFC tungsten evolves according to a first-order saturation kinetics, consistent with experimental and simulation results reported in the literature. We establish that this elastic softening accelerates both nanotendril growth on the PFC surface and the onset of fuzz formation. We also explore the role of the rate of He accumulation to a saturation level in the near-surface region of irradiated tungsten in the onset of fuzz formation. For PFC tungsten surfaces such as W(110) where, under typical irradiation conditions, the characteristic time scale for stress-driven surface diffusion is comparable to the characteristic time scale for He accumulation, we find that accelerating the rate of He accumulation accelerates the growth rate of nanotendrils emanating from the surface. Additionally, we present a systematic parametric study of the PFC surface morphological response to explore its dependence on the He accumulation kinetics that is controlled by the irradiation conditions for low-energy implantation. Finally, we introduce an incubation time for nanotendril growth on the PFC surface, a concept equivalent to that of incubation fluence discussed in the literature, to predict and explain the minimum exposure time required to observe fuzz formation on PFC tungsten surfaces.

36 MATERIALS SCIENCE↗

Detailed Nb Surface Morphology Evolution During Electropolishing for SRF Cavity Production

Electropolishing of niobium is currently an important part of attaining the best performance of SRF cavities. We endeavor to develop sufficient understanding of the process dynamics to gain predictive power over specific topographies subjected to controlled electropolishing conditions. This work examines the evolution of highly reproducible Nb surface morphology produced by centrifugal barrel polishing (CBP) of fine-grain and single-crystal material as this material is electropolished under different well-controlled conditions. The morphology evolution of Nb surface has been described using a combined approach of scaling analysis and predictions of the electropolishing theory. Our results shows that electropolishing at low temperature (<25 C) helps to smooth out the surface feature scales within the diffusion layer (<20 µm) and to reduce the kinetics-controlled surface etching. A preliminary computational model has been developed that simulates the evolution of specific topography of a niobium surface under parametrized conditions. This work is expected to lead to the direct linking of starting surface morphology specification, specific processing protocol, and consistently attained finished surface condition.

Tian, H.↗

Surface morphology of atomic nitrogen on Pt(111)

The surface morphology of chemisorbed N on the Pt(111) surface has been studied at the atomic level with low temperature scanning tunneling microscopy (STM). When N is coadsorbed with O on the surface, they form a mixed (2 × 2)-N+O structure. When the surface is covered with N atoms only, isolated atoms and incomplete (2 × 2) patches are observed at low coverages. In a dense N layer, two phases, (√3 × √3)R30°-N and p(2 × 2)-N, are found to coexist at temperatures between 360 and 400 K. The (√3 × √3)R30° phase converts to the (2 × 2) phase as temperature increases. For both phases, nitrogen occupies fcc-hollow sites. At temperatures above 420 K, nitrogen starts to desorb. The p(2 × 2)-N phase shows a honeycomb structure in STM images with three nitrogen and three platinum atoms forming a six-membered ring, which can be attributed to the strong nitrogen binding to the underlying Pt surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of surface morphology on the retention loss of ferroelectric domains in poly(vinylidenefluoride-co-trifluoroethylene) thin films.

Effects of surface morphology on the retention loss of ferroelectric domains of poly(vinylidenefluoride-co-trifluoroethylene) thin films were investigated using piezoresponse force microscopy. We found that the retention loss occurred by nucleation of opposite domains at the regions with morphological gradients between 0.079 and 0.146. In addition, we observed collective decreases in piezoresponse amplitude of the opposite domains after 0.8 x 10{sup 6} s, although each reversed domain showed different growth rate as evidenced by different threshold time for phase reversal. These results suggest that the surface morphology has a strong influence in determining the nucleation and growth kinetics by which the retention loss occurs.

36 MATERIALS SCIENCE↗

Helium bubble size effects on the surface morphological response of plasma-facing tungsten

Abstract We report a simulation study on the effects of helium (He) bubble size on the morphological evolution and pattern formation on the surface of tungsten used as a plasma-facing component (PFC) in nuclear fusion devices. We have carried out a systematic investigation based on self-consistent dynamical simulations of surface morphological evolution according to an atomistically-informed, 3D continuum-scale model that captures well the relevant length and time scales of surface nanostructure formation in PFC tungsten. The model accounts for PFC surface diffusion, driven by the biaxial compressive stress originating from the over-pressurized He bubbles in the near-surface region of PFC tungsten as a result of He plasma exposure, combined with the formation of self-interstitial atoms in tungsten that diffuse toward the PFC surface and the flux of surface adatoms generated as a result of surface vacancy-adatom pair formation upon He implantation; this transport of surface adatoms contributes to the anisotropic growth of surface nanostructural features due to the different rates of adatom diffusion along and across step edges of islands on the tungsten surface. Our detailed analysis reveals that varying the average He bubble size plays an important role in the PFC surface growth kinetics as well as the resulting surface topography. Specifically, we find that an increase in the He bubble size leads to a deceleration in the growth rate of the tungsten nanotendrils that emanate from the PFC surface. We also find that the separation distance between the resulting surface features increases with increasing He bubble size, as well as over time. This coarsening effect is a thermally activated process resulting in an accurate description of the temperature dependence of the average surface feature separation by an Arrhenius relation.

36 MATERIALS SCIENCE↗

The mechanism of the surface morphology transformation for the carbon nanotube thin film irradiated via excimer laser

In this paper, the surface morphology transformation of the sprayed carbon nanotube (CNT) thin film irradiated with the excimer laser has been systematically investigated. Under the excimer-laser irradiation, two phenomena, including the annealing and ablation effects, were found to be dependent on the incident laser energy and overlapping ratios. Moreover, the extremely high protrusions would be produced in the interface between the annealing and ablation regions. The mechanism of the CNT thin film under the excimer laser irradiation was, therefore, proposed to derive the surface morphology modifications and the further reinforced crystallinity with proper laser energy densities and overlapping ratios.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of alkali treatment on surface morphology of titanium

Alkali and heat treatments were first introduced by Kim et al. to prepare a bioactive surface on titanium. This method has been proven very effective and widely used in other studies to promote titanium osteointegration. This study aims to investigate further the effect of alkali treatment on surface morphology of high purity titanium. High purity titanium foils were immersed in NaOH aqueous solutions of 0.5 M, 5 M and 15 M at 60°C and 80 °C for 1, 3 and 7 days. The surface morphology was examined using Field Emission Scanning Electron Microscope (FESEM). The obtained phases were analysed using Fourier Transform Infrared Spectroscopy (FTIR) in the spectra range of 4000-600 cm{sup −1} at 4 cm{sup −1} resolution and 50 scans. At the same soaking temperature and soaking time, a thicker porous network was observed with increasing concentration of NaOH. At the same soaking temperature, a much porous structure was observed with increasing soaking time. At constant alkali concentration, more homogenously distributed porous surface structure was observed with increasing soaking temperature.

36 MATERIALS SCIENCE↗

SURFACE MORPHOLOGY OF CARBON FIBER POLYMER COMPOSITES AFTER LASER STRUCTURING

The increasing use of Carbon Fiber Polymer Composite (CFPC) as a lightweight material in automotive and aerospace industries requires the control of surface morphology. In this study, the composites surface was prepared by ablating the resin in the top fiber layer of the composite using an Nd:YAG laser. The CFPC specimens with T700S carbon fiber and Prepreg - T83 resin (epoxy) were supplied by Plasan Carbon Composites, Inc. as 4 ply thick, 0/90o plaques. The effect of laser fluence, scanning speed, and wavelength was investigated to remove resin without an excessive damage of the fibers. In addition, resin ablation due to the power variation created by a laser interference technique is presented. Optical property measurements, optical micrographs, 3D imaging, and high-resolution optical profiler images were used to study the effect of the laser processing on the surface morphology.

Sabau, Adrian S↗

Switching of localized surface plasmon resonance of gold nanoparticles on a GeSbTe film mediated by nanoscale phase change and modification of surface morphology

As a platform for active nanophotonics, localized surface plasmon resonance (LSPR) switching via interaction with a chalcogenide phase change material (GeSbTe) was investigated. We performed single-particle spectroscopy of gold nanoparticles placed on a GeSbTe thin film. By irradiation with a femtosecond pulsed laser for amorphization and a continuous wave laser for crystallization, significant switching behavior of the LSPR band due to the interaction of GeSbTe was observed. The switching mechanism was explained in terms of both a change in the refractive index and a modification of surface morphology accompanying volume expansion and reduction of GeSbTe.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dynamic Mechanical Properties and Fracture Surface Morphologies of Core-Shell Rubber (CSR) Toughened Epoxy at Liquid Nitrogen (Ln2) Temperatures

The dynamic mechanical properties and fracture surface morphologies were evaluated for a commercial epoxy resin toughened with two types of core-shell rubber (CSR) toughening agents (Kane Ace(Registered TradeMark) MX130 and MX960). The impact resistance (R) was evaluated by the resulting breaking energy measured in Charpy impact tests conducted on an instrumented drop tower. The resulting fracture surface morphologies were examined using Scanning Electron Microscopy (SEM). Fractographic observations of the CSR toughened epoxy tested at ambient temperature, showed a fracture as characterized by slender dendrite textures with large voids. The increasing number of dendrites and decreasing size of scale-like texture with more CSR particles corresponded with increased R. As the temperature decreased to Liquid Nitrogen (LN 2), the fracture surfaces showed a fracture characterized by a rough, torn texture containing many river markings and deep furrows.

Wang, J.↗

Surface morphologies and electrical properties of molecular beam epitaxial InSb and InAs(x)Sb(1-x) grown on GaAs and InP substrates

Surface morphologies and electrical properties of molecular beam epitaxial InSb and InAs(x)Sb(1-x) grown on GaAs and InP substrates are discussed. The crystals are all n-type at 300 K and lower temperatures. The surface morphology and electrical characteristics are strongly dependent on Sb(4)/In flux ratio and substrate temperature. The highest mobilities in InSb on InP are 70,000 at 300 K and 110,000 cm(2)/V.s (n=3x10(15) cm(-3)) at 77 K. The mobilities in the alloys also increase monotonically with lowering of temperature. Good quality InAs(x)Sb(1-x) was grown directly on InP substrates by molecular beam epitaxy.

Oh, J. E.↗