Results for “tandem system” — Page 2

NASA NTRS1988

Intelligent fault diagnosis and failure management of flight control actuation systems

The real-time fault diagnosis and failure management (FDFM) of current operational and experimental dual tandem aircraft flight control system actuators was investigated. Dual tandem actuators were studied because of the active FDFM capability required to manage the redundancy of these actuators. The FDFM methods used on current dual tandem actuators were determined by examining six specific actuators. The FDFM capability on these six actuators was also evaluated. One approach for improving the FDFM capability on dual tandem actuators may be through the application of artificial intelligence (AI) technology. Existing AI approaches and applications of FDFM were examined and evaluated. Based on the general survey of AI FDFM approaches, the potential role of AI technology for real-time actuator FDFM was determined. Finally, FDFM and maintainability improvements for dual tandem actuators were recommended.

Bonnice, William F.↗

NASA NTRS2021

Design and Development of Nano-electro Fuel Batteries and Rim-driven Motors for Electrified Aircraft Applications

The National Aeronautics and Space Administration Convergent Aeronautics Solutions project seeks to determine feasibility of emerging technologies in aeronautics. The Aqueous, QUick-Charging Battery Integration For Electric flight Research study pursued the feasibility of nano-electro fuel and rim-driven motor technologies integrated together for aircraft implementation. Development of the NEF technology was in partnership with Influit Energy, LLC (Chicago, Illinois). A rim-driven motor, designed by the project team, sized to represent one of 24 motors in the propulsion system of the tandem electric super-short takeoff and landing aircraft is discussed. The development of this electric super-short takeoff and landing concept was in partnership with The Boeing Company (Chicago, Illinois). The integrated system design of the nano-electro fuel and rim-driven motor technologies within the wing section was in partnership with Empirical Systems Aerospace, Inc. (ESAero) (San Luis Obispo, California). The feasibility benchmark for the nano-electro fuel battery was to attain 100 mA/sq. cm within two years, a 50-fold increase over the demonstrated cell performance before the Convergent Aeronautics Solutions Aqueous, QUick-Charging Battery Integration For Electric flight Research activity. The team achieved 85 mA/sq. cm in the nano-electro fuel flow cell at the end of the two years. The Aqueous, QUick-Charging Battery Integration For Electric flight Research project team determined the technology to be both inflammable and nonexplosive (unless multiple, simultaneous system failures occur) which would provide a safer alternative to conventional lithium-ion based battery systems.

Kurt V. Papathakis↗

NASA NTRS1968

Two sets of linearized aircraft equations of motion for control system analysis

Developing mathematical model for tandem rotor helicopter for analysis of automatic approach and landing system

Rempfer, P. S.↗

NASA NTRS1982

Study of aerodynamic technology for single-cruise engine V/STOL fighter/attack aircraft

A conceptual design analysis is performed on a single engine V/STOL supersonic fighter/attack concept powered by a series flow tandem fan propulsion system. Forward and aft mounted fans have independent flow paths for V/STOL operation and series flow in high speed flight. Mission, combat and V/STOL performance is calculated. Detailed aerodynamic estimates are made and aerodynamic uncertainties associated with the configuration and estimation methods identified. A wind tunnel research program is developed to resolve principal uncertainties and establish a data base for the baseline configuration and parametric variations.

Driggers, H. H.↗

NASA NTRS2015

Mock Certification Basis for an Unmanned Rotorcraft for Precision Agricultural Spraying

This technical report presents the results of a case study using a hazard-based approach to develop preliminary design and performance criteria for an unmanned agricultural rotorcraft requiring airworthiness certification. This case study is one of the first in the public domain to examine design and performance criteria for an unmanned aircraft system (UAS) in tandem with its concept of operations. The case study results are intended to support development of airworthiness standards that could form a minimum safety baseline for midsize unmanned rotorcraft performing precision agricultural spraying operations under beyond visual line-of-sight conditions in a rural environment. This study investigates the applicability of current methods, processes, and standards for assuring airworthiness of conventionally piloted (manned) aircraft to assuring the airworthiness of UAS. The study started with the development of a detailed concept of operations for precision agricultural spraying with an unmanned rotorcraft (pp. 5-18). The concept of operations in conjunction with a specimen unmanned rotorcraft were used to develop an operational context and a list of relevant hazards (p. 22). Minimum design and performance requirements necessary to mitigate the hazards provide the foundation of a proposed (or mock) type certification basis. A type certification basis specifies the applicable standards an applicant must show compliance with to receive regulatory approval. A detailed analysis of the current airworthiness regulations for normal-category rotorcraft (14 Code of Federal Regulations, Part 27) was performed. Each Part 27 regulation was evaluated to determine whether it mitigated one of the relevant hazards for the specimen UAS. Those regulations that did were included in the initial core of the type certification basis (pp. 26-31) as written or with some simple modifications. Those regulations that did not mitigate a recognized hazard were excluded from the certification basis. The remaining regulations were applicable in intent, but the text could not be easily tailored. Those regulations were addressed in separate issue papers. Exploiting established regulations avoids the difficult task of generating and interpreting novel requirements, through the use of acceptable, standardized language. The rationale for the disposition of the regulations was assessed and captured (pp. 58-115). The core basis was then augmented by generating additional requirements (pp. 38-47) to mitigate hazards for an unmanned sprayer that are not covered in Part 27.

Hayhurst, Kelly J.↗

NASA NTRS1975

Necessary and sufficient conditions for the complete controllability and observability of systems in series using the coprime factorization of a rational matrix

The series connection of two linear time-invariant systems that have minimal state space system descriptions is considered. From these descriptions, strict-system-equivalent polynomial matrix system descriptions in the manner of Rosenbrock are derived. They are based on the factorization of the transfer matrix of the subsystems as a ratio of two right or left coprime polynomial matrices. They give rise to a simple polynomial matrix system description of the tandem connection. Theorem 1 states that for the complete controllability and observability of the state space system description of the series connection, it is necessary and sufficient that certain 'denominator' and 'numerator' groups are coprime. Consequences for feedback systems are drawn in Corollary 1. The role of pole-zero cancellations is explained by Lemma 3 and Corollaires 2 and 3.

Callier, F. M.↗

NASA NTRS2021

System Identification for Propellers at High Incidence Angles

Propellers used for electric vertical takeoff and landing (eVTOL) aircraft propulsion systems experience a wide range of aerodynamic conditions, including large incidence angles relative to oncoming airflow. In oblique flow, propellers exhibit deviations in thrust and torque oriented along the propeller axis of rotation, as well as significant off-axis forces and moments. Although important for modeling eVTOL aircraft aerodynamics, sparse experimental data or mathematical models exist for propellers at incidence. This paper describes a propulsion system modeling methodology for the LA-8 tandem tilt-wing, eVTOL aircraft. System identification methods are applied to isolated propeller wind tunnel data gathered across the vehicle's flight envelope to develop a mathematical model of the propulsion system, including a static motor model, dynamic motor model, and propeller aerodynamic model. Modeling results validated against data withheld from the modeling process indicate good predictive capability and agree with theoretical expectations. The results are followed by a discussion of model implementation strategies into high-fidelity eVTOL aircraft simulations.

system identification↗

NASA NTRS1987

Flight test of a digital controller used in a helicopter autoland system

This paper describes the flight test evaluation of an advanced digital helicopter flight control system. The controller was designed using an optimal control design procedure for a fully coupled lateral and longitudinal vehicle model. Explicit integrals of the guidance error were included to produce a type 1 characteristic. Gain scheduling was used to account for changes in the vehicle dynamics. The digital controller was exercised by combining it with state estimators, a trajectory generator, and a closed-loop guidance algorithm to form a helicopter autoland system. A CH-47 tandem rotor helicopter was equipped with sensors, on-board digital flight computers, and electrohydraulic actuators. The system was exercised by automatically flying straight-in descending decelerating trajectories typcial of VFR manual landing approaches. A description of the test-ground facilities, the flight hardware and software, and the velocity and position tracking performance is included.

Downing, David R.↗

NASA NTRS1979

Flight test evaluation of a digital controller used in a VTOL automatic approach and landing system

As part of the NASA Langley Research Center's effort to develop technology for VTOL operation in the air transportation system in the late 1980's and beyond, research has been conducted aimed at developing digital controller design procedures. This paper describes the verification of one design procedure by the flight evaluation of an advanced digital control algorithm. The control algorithm, operating at 10 iterations per second, follows step guidance commands with zero steady state error and thus provides an autotrim capability for the nonlinear vehicle. Changes in vehicle dynamics are accounted for using a gain scheduling technique. This control algorithm is combined with sensor filters, a trajectory generator, and a closed loop guidance algorithm to form a VTOL autoland system. A CH-47 tandem rotor helicopter which contains a set of sensors, onboard digital flight computers and electro-hydraulic actuators is used in the evaluation. All software, except input-output routines, is coded in FORTRAN using floating point arithmetic and executed in the flight computer. This autoland system is exercised by automatically flying straight-in descending decelerating trajectories typical of VFR manual approaches to a predetermined landing pad.

Downing, D. R.↗

NASA NTRS1984

Aeromechanical stability analysis of a multirotor vehicle with application to hybrid heavy lift helicopter dynamics

The Hybrid Heavy Lift Helicopter (HHLH) is a potential candidate vehicle aimed at providing heavy lift capability at low cost. This vehicle consists of a buoyant envelope attached to a supporting structure. Four rotor systems are also attached to the supporting structure. Nonlinear equations of motion capable of modeling the dynamics of this multi-rotor/support frame/vehicle system have been developed and used to study the fundamental aeromechanical stability characteristics of this class of vehicles. The mechanism of coupling between the blades, supporting structure and rigid body modes is identified and the effect of buoyancy ratio (buoyant lift/total weight) on the vehicle dynamics is studied. It is shown that dynamics effects have a major role in the design of such vehicles. The analytical model developed is also useful for studying the aeromechanical stability of single rotor and tandem rotor coupled rotor/fuselage systems.

Venkatesan, C.↗

NASA NTRS1984

Aeromechanical stability analysis of a multirotor vehicle model representing a hybrid heavy lift airship (HHLA)

Hybrid Heavy Lift Airship (HHLA) is a proposed candidate vehicle aimed at providing heavy lift capability at low cost. This vehicle consists of a buoyant envelope attached to a supporting structure to which four rotor systems, taken from existing helicopters are attached. Nonlinear equations of motion capable of modelling the dynamics of this coupled multi-rotor/support frame/vehicle system have been developed. Using these equations of motion the aeroelastic and aeromechanical stability analysis is performed aimed at identifying potential instabilities which could occur for this type of vehicle. The coupling between various blade, supporting structure and rigid body modes is identified. Furthermore, the effects of changes in buoyancy ratio (Buoyant lift/total weight) on the dynamic characteristics of the vehicle are studied. The dynamic effects found are of considerable importance for the design of such vehicles. The analytical model developed is also useful for studying the aeromechanical stability of single rotor and tandem rotor coupled rotor/fuselage systems.

Venkatesan, C.↗

NASA NTRS2022

A Rideshare Tensegrity Rover Concept to Explore Titan’s Lands and Oceans

The Tension Adjustable Network for Deploying Entry Membrane (TANDEM) concept is a phase II NASA Innovative Advanced Concepts (NIAC) project. One of the goals for this project was to extend the application of tensegrity-based rovers to a rideshare concept for a Titan mission. This report provides preliminary details of the TANDEM concept for Titan. System analyses of the entry vehicle were performed and compared to data from the Huygens mission to Titan. The entry aeroshell was based on Huygens and Stardust aeroshells. Modeling, simulation and design of the tensegrity deployment were performed using a nonlinear optimization form-finding algorithm. Lastly, a neuroevolution-based machine learning control strategy was applied, which produced efficient rolling locomotion gaits.

tensegrity↗

NASA NTRSDate not supplied

System Identification for Propellers at High Incidence Angles

Propellers used for electric vertical takeoff and landing (eVTOL) aircraft propulsion systems experience a wide range of aerodynamic conditions, including large incidence angles relative to oncoming airflow. In oblique flow, propellers exhibit deviations in thrust and torque oriented along the propeller axis of rotation, as well as significant off-axis forces and moments. Although important for modeling eVTOL aircraft aerodynamics, sparse experimental data or mathematical models exist for propellers at incidence. This paper describes a propulsion system modeling methodology for the Langley Aerodrome No. 8 (LA-8) tandem tilt-wing, eVTOL aircraft. System identification methods are applied to isolated propeller wind tunnel data gathered across the vehicle's flight envelope to develop a mathematical model of the propulsion system, including a static motor model, dynamic motor model, and propeller aerodynamic model. Modeling results validated against data withheld from the modeling process indicate good predictive capability and agree with theoretical expectations. The results are followed by a discussion of model implementation strategies into high-fidelity eVTOL aircraft simulations.

system identification↗

NASA NTRS2013

Camera Systems Rapidly Scan Large Structures

Needing a method to quickly scan large structures like an aircraft wing, Langley Research Center developed the line scanning thermography (LST) system. LST works in tandem with a moving infrared camera to capture how a material responds to changes in temperature. Princeton Junction, New Jersey-based MISTRAS Group Inc. now licenses the technology and uses it in power stations and industrial plants.

Source record↗

NASA NTRSDate not supplied

The Light Bender Concept for Power Distribution on a Lunar Base

Power generation and distribution is a challenge for a future lunar base. A promising concept for lunar power distribution is the light bender—a system that utilizes autonomously deployed mirrors to reflect sunlight to shaded regions on the lunar surface. The light bender system consists of two components: tandem reflector mirrors (TRM) which reflect sunlight to a permanently shaded region and the Cassegrain Fresnel distribution optics (CFDO) which collects the reflected light from the TRM and redirects light to local consumer nodes. This paper describes the light bender system concepts and the associated system analysis and technology development performed as part of a 2021 NASA Innovative Advanced Concepts (NIAC) phase I award.

Bradford Robertson↗

NASA NTRSDate not supplied

The Light Bender Concept for Power Distribution on a Lunar Base

Power generation and distribution is a challenge for a future lunar base. A promising concept for lunar power distribution is the light bender—a system that utilizes autonomously deployed mirrors to reflect sunlight to shaded regions on the lunar surface. The light bender system consists of two components: tandem reflector mirrors (TRM) which reflect sunlight to a permanently shaded region and the Cassegrain Fresnel distribution optics (CFDO) which collects the reflected light from the TRM and redirects light to local consumer nodes. This paper describes the light bender system concepts and the associated system analysis and technology development performed as part of a 2021 NASA Innovative Advanced Concepts (NIAC) phase I award.

Bradford Robertson↗

NASA NTRSDate not supplied

An Analytic Collaborative Framework for the Earth System Observatory

NASA's Earth System Observatory groundbreaking observations will provide critical measurements to address societal relevant problems in climate change, natural hazard mitigation, fighting forest fires, and improving real-time agricultural processes. Central to the ESO vision is the notion of Open-Source Science (OSS), a collaborative culture enabled by technology that promotes the open sharing of data, information, and knowledge aiming to facilitate and accelerate scientific understanding, and the agile development of applications for the benefit of society. The larger vision of an Earth System Digital Twin (ESDT) calls for integrated Earth science frameworks that mirror the Earth by a proxy digital construct that includes km-scale resolution Earth system models and data assimilation systems along with an integrated set of analytic tools to enable the next generation of science discoveries and evidence-based decision making. The goal of this project is to develop an Analytic Collaborative Framework for ESO missions, based on realistic, science-based observing system simulations and the Program of Record (PoR). Tying it all together is a cloud-based cyberinfrastructure that will enable each uniquely designed satellite in the Earth System Observatory to work in tandem to create a 3D, holistic view of Earth. In this presentation, we lay the technological groundwork for enabling such a vision. Our approach consists of the 3 main interconnected building blocks: 1. Cloud-optimized representative datasets for ESO missions and the PoR to serve as basis for developing and prototyping an Analytic Collaborative Framework. 2. An Algorithm Workbench for enabling experimentation and exploration of synergistic algorithms not only for instruments within a mission, but also including the PoR and other ESO missions. 3. A series of concrete Open-Source Science demonstrations including use cases that span science discovery and end-user applications with direct societal impact. While our ultimate goal is to include all of the main missions comprising the Earth System Observatory, in our initial 2 years we will focus on AOS and SBG, two missions for which specific synergisms have been identified in a recent workshop. In this presentation we will describe our approach and discuss some illustrative examples of our framework.

Arlindo da SIlva↗

NASA NTRSDate not supplied

An Analytic Collaborative Framework for the Earth System Observatory

NASA's Earth System Observatory groundbreaking observations will provide critical measurements to address societal relevant problems in climate change, natural hazard mitigation, fighting forest fires, and improving real-time agricultural processes. Central to the ESO vision is the notion of Open-Source Science (OSS), a collaborative culture enabled by technology that promotes the open sharing of data, information, and knowledge aiming to facilitate and accelerate scientific understanding, and the agile development of applications for the benefit of society. The larger vision of an Earth System Digital Twin (ESDT) calls for integrated Earth science frameworks that mirror the Earth by a proxy digital construct that includes km-scale resolution Earth system models and data assimilation systems along with an integrated set of analytic tools to enable the next generation of science discoveries and evidence-based decision making. The goal of this project is to develop an Analytic Collaborative Framework for ESO missions, based on realistic, science-based observing system simulations and the Program of Record (PoR). Tying it all together is a cloud-based cyberinfrastructure that will enable each uniquely designed satellite in the Earth System Observatory to work in tandem to create a 3D, holistic view of Earth. In this presentation, we lay the technological groundwork for enabling such a vision. Our approach consists of the 3 main interconnected building blocks: 1. Cloud-optimized representative datasets for ESO missions and the PoR to serve as basis for developing and prototyping an Analytic Collaborative Framework. 2. An Algorithm Workbench for enabling experimentation and exploration of synergistic algorithms not only for instruments within a mission, but also including the PoR and other ESO missions. 3. A series of concrete Open-Source Science demonstrations including use cases that span science discovery and end-user applications with direct societal impact. While our ultimate goal is to include all of the main missions comprising the Earth System Observatory, in our initial 2 years we will focus on AOS and SBG, two missions for which specific synergisms have been identified in a recent workshop. In this presentation we will describe our approach and discuss some illustrative examples of our framework.

Arlindo da SIlva↗