Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature interpolation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Application of Modern Design of Experiments to CARS Thermometry in a Model Scramjet Engine

We have applied formal experiment design and analysis to optimize the measurement of temperature in a supersonic combustor at NASA Langley Research Center. We used the coherent anti-Stokes Raman spectroscopy (CARS) technique to map the temperature distribution in the flowfield downstream of an 1160 K, Mach 2 freestream into which supersonic hydrogen fuel is injected at an angle of 30 degrees. CARS thermometry is inherently a single-point measurement technique; it was used to map thc flow by translating the measurement volume through the flowfield. The method known as "Modern Design of Experiments" (MDOE) was used to estimate the data volume required, design the test matrix, perform the experiment and analyze the resulting data. MDOE allowed us to match the volume of data acquired to the precision requirements of the customer. Furthermore, one aspect of MDOE, known as response surface methodology, allowed us to develop precise maps of the flowfield temperature, allowing interpolation between measurement points. An analytic function in two spatial variables was fit to the data from a single measurement plane. Fitting with a Cosine Series Bivariate Function allowed the mean temperature to be mapped with 95% confidence interval half-widths of +/- 30 Kelvin, comfortably meeting the confidence of +/- 50 Kelvin specified prior to performing the experiments. We estimate that applying MDOE to the present experiment saved a factor of 5 in data volume acquired, compared to experiments executed in the traditional manner. Furthermore, the precision requirements could have been met with less than half the data acquired.

Danehy, P. M.↗

Explicit modeling of abiotic and landscape factors reveals precipitation and forests associated with aphid abundance

Abstract Increases in natural or noncrop habitat surrounding agricultural fields have been shown to be correlated with declines in insect crop pests. However, these patterns are highly variable across studies suggesting other important factors, such as abiotic drivers, which are rarely included in landscape models, may also contribute to variability in insect population abundance. The objective of this study was to explicitly account for the contribution of temperature and precipitation, in addition to landscape composition, on the abundance of a widespread insect crop pest, the soybean aphid ( Aphis glycines Matsumura), in Wisconsin soybean fields. We hypothesized that higher soybean aphid abundance would be associated with higher heat accumulation (e.g., growing degree days) and increasing noncrop habitat in the surrounding landscape, due to the presence of the overwintering primary hosts of soybean aphid. To evaluate these hypotheses, we used an ecoinformatics approach that relied on a large dataset collected across Wisconsin over a 9‐year period (2003–2011), for an average of 235 sites per year ( n = 2,110 fields total). We determined surrounding landscape composition (1.5‐km radius) using publicly available satellite‐derived land cover imagery and interpolated daily temperature and precipitation information from the National Weather Service COOP weather station network. We constructed linear mixed models for soybean aphid abundance based on abiotic and landscape explanatory variables and applied model averaging for prediction using an information theoretic framework. Over this broad spatial and temporal extent in Wisconsin, we found that variation in growing season precipitation was positively related to soybean aphid abundance, while higher precipitation during the nongrowing season had a negative effect on aphid populations. Additionally, we found that aphid populations were higher in areas with proportionally more forest but were lower in areas where minor crops, such as small grains, were more prevalent. Thus, our findings support our hypothesis that including abiotic drivers increases our understanding of crop pest abundance and distribution. Moreover, by explicitly modeling abiotic factors, we may be able to explore how variable climate in tandem with land cover patterns may affect current and future insect populations, with potentially critical implications for crop yields and agricultural food webs.

Stack Whitney, Kaitlin↗

Implementation of the direct S ( α , β ) method in the KENO Monte Carlo code

The Monte Carlo code KENO contains thermal scattering data for a wide variety of thermal moderators. These data are processed from Evaluated Nuclear Data Files (ENDF) by AMPX and stored as double differential probability distribution functions. The method examined in this study uses S(α,β) probability distribution functions derived from the ENDF data files directly instead of being converted to double differential cross sections. This allows the size of the cross section data on the disk to be reduced substantially amount. KENO has also been updated to allow interpolation in temperature on these data so that problems can be run at any temperature. Results are shown for several simplified problems for a variety of moderators. In addition, benchmark models based on the KRITZ reactor in Sweden were run, and the results are compared with the previous versions of KENO without the direct S(α,β) method. Results from the direct S(α,β) method compare favorably with the original results obtained using the double differential cross sections. Finally, sampling the data increases the run-time of the Monte Carlo calculation, but memory usage is decreased substantially.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Direct NeTS sampling of nuclear graphite $S(α, β, T)$ in Serpent

For advanced reactor applications, Neural Thermal Scattering (NeTS) modules were developed to predict the thermal scattering law (TSL or $S(α, β, T)$) of a nuclear graphite neutron moderator. NeTS are multi-layer, feedforward artificial neural networks, which act as universal function approximators designed for TSL datasets. In this case, a 4-layer neural network with 164 neurons per layer is trained using FLASSH evaluated data in PyTorch and serialized as a torchscript dictionary to predict $S(α, β, T)$ on-the-fly. Relative, absolute and maximum percent deviations of NeTS from File 7 data generated using the FLASSH code are on the order of 0.01%, 0.1% and 1%, respectively, with low inference latencies of 0.000172 s per $S(α, β, T)$ at a given temperature. Capturing the full dimensionality of possible inelastic neutron-lattice interactions, NeTS functionality is embedded in the Serpent Monte Carlo code, where $S(α, β, T)_{NeTS}$ sampling is conducted on-the-fly and compared to ACE look-up-tables for predicting TREAT criticality. k-eff differences between sampling algorithms of 6 pcm are observed and are within the order of Monte Carlo uncertainty. Compared to discrete and continuous-energy ACE files (30 MB and 131 MB per temperature), the NeTS format is on the order of 200–300 kB for a continuous-temperature, interpolation-free representation of $S(α, β, T)$ and cross sections. NeTS-in-Serpent runtimes comparable with ACE look-up tables are achieved by scaling NeTS for high performance computing architectures with hybrid OpenMP + MPI parallelization. This work validates a novel, self-contained reactor physics framework for predictive cross sections, and demonstrates a general methodology for embedding modern machine learning libraries within existing neutronic analysis frameworks.

Nuclear Criticality Safety Program (NCSP)↗

Finite-temperature phase diagram of the Berenstein-Maldacena-Nastase matrix model on the lattice

We investigate the thermal phase structure of the Berenstein-Maldacena-Nastase matrix model using nonperturbative lattice Monte Carlo calculations. Our main analyses span 3 orders of magnitude in the coupling, involving systems with sizes up to 𝑁𝜏 =24 lattice sites and SU⁡(𝑁) gauge groups with 8 ≤𝑁 ≤16. In addition, we carry out extended checks of discretization artifacts for 𝑁𝜏 ≤128 and gauge group SU(4). We find results for the deconfinement temperature that interpolate between the perturbative prediction at weak coupling and the large-𝑁 dual supergravity calculation at strong coupling. While we confirm that the phase transition is first order for strong coupling, it appears to be continuous for weaker couplings.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CORPSE model with litter decomposition parameters derived from the LIDET dataset

This is a version of the CORPSE model (Carbon, Organisms, Rhizosphere and Protection in the Soil Environment, Sulman et al. 2014) that uses litter decomposition parameters derived from a modified Monte Carlo simulation using the LIDET litter decomposition dataset (Long-term Intersite Decomposition Experiment Team, Harmon 2013). The code also includes the Baseline parameters, and the eight other best parameter sets identified in a modified Monte Carlo simulation. Related publication:Juice, S.M., Ridgeway, J.R., Hartman, M.D., Parton, W.J., Berardi, D.M., Sulman, B.N., Allen, K.E., & Brzostek, E.R. Reparameterizing litter decomposition using a simplified Monte Carlo method improves litter decay simulated by a microbial model and alters bioenergy soil carbon estimates. Description of files:The folder "Input Files" contains one folder for each LIDET site with data necessary to run the model. Note that "(site)" in the filenames below indicates where the LIDET site code appears (see Table 1 for site codes). Data streams include: CORPSE_full_spinup_litter.csv, CORPSE_full_spinup_rhizo.csv, CORPSE_full_spinup_bulk.csv, litterbag_init_100g_6spp.csv: initial C and N (kg C or N/m2) pool values for each soil layer, the litterbag_init_100_6spp.csv file is for the litterbag layer and is the same file for all sites. All initial C and N files have the same columns (Column - Description - Units) uFastC - Unprotected fast decomposing carbon - kg carbon/m2 uSlowC - Unprotected slow decomposing carbon - kg carbon/m2 uNecroC - Unprotected necromass carbon - kg carbon/m2 pFastC - Protected fast decomposing carbon - kg carbon/m2 pSlowC - Protected slow decomposing carbon - kg carbon/m2 pNecroC - Protected necromass carbon - kg carbon/m2 livingMicrobeC - Carbon in living microbial biomass - kg carbon/m2 uFastN - Unprotected fast decomposing nitrogen - kg nitrogen/m2 uSlowN - Unprotected slow decomposing nitrogen - kg nitrogen/m2 uNecroN - Unprotected necromass nitrogen - kg nitrogen/m2 pFastN - Protected fast decomposing nitrogen - kg nitrogen/m2 pSlowN - Protected slow decomposing nitrogen - kg nitrogen/m2 pNecroN - Protected necromass nitrogen - kg nitrogen/m2 inorganicN - Inorganic nitrogen - kg nitrogen/m2 CO2 - Carbon in carbon dioxide - kg carbon/m2 livingMicrobeN - Nitrogen in living microbial biomass - kg nitrogen/m2 soilT (site) DOY274start.csv: Average daily soil temperature (oC) interpolated from previously calculated monthly values used in DayCent LIDET simulations (Bonan et al., 2013). soilT (site) DOY274start.csv: Average daily soil volumetric water content (VWC) scalar interpolated from previously calculated monthly values used in DayCent LIDET simulations (Bonan et al., 2013). litter production.csv: Average daily litter production values for each site, data sources listed in Table S3 of related publication. litter (site) CN.csv: C:N ratio for each species from LIDET dataset (Table 2, Harmon 2013). (site).csv: Table indicating number of observations for each species decomposed at each site. Instructions: Save the model code ("CORPSE_LIDET.R") and "Input Files" folder in the same folder. Also make a folder for the model output (e.g., "results_Baseline") in the same folder. Set the working directory (setwd) in the model code to the folder with the files saved in step #1. Select the parameter set to use for the litter and litterbag compartments, comment out all other parameter sets. Run code. Output will be saved in the folder made in step 1. Output destination can be changed as necessary in code section called "Running the model." Table 1 LIDET sites and site codes used in model files. Site Code - Site AND - H.J. Andrews Experimental Forest BNZ - Bonanza Creek Experimental Forest BSF - Blodgett Research Forest CDR - Cedar Creek Natural History Area CPR - Central Plains Experimental Range HBR - Hubbard Brook Experimental Forest HFR - Harvard Forest JUN - Juneau KBS - Kellogg Biological Station KNZ - Konza Prairie Research Natural Area NWT - Niwot Ridge/Green Lakes Valley OLY - Olympic National Park OLY Conifer forest SEV - Sevilleta National Wildlife Refuge SMR - Santa Margarita Ecological Reserve UFL - University of Florida VCR - Virginia Coast Reserve Table 2 LIDET species and species codes used in model files (6 common species). Species - Species Code Sugar maple (Acer saccharum) - ACSA Drypetes (Drypetes glauca) - DRGL Red pine (Pinus resinosa) - PIRE Chestnut oak (Quercus prinus) - QUPR Western redcedar (Thuja plicata) - THPL Wheat (Triticum aestivum) - TRAE References:Bonan, G. B., Hartman, M. D., Parton, W. J., & Wieder, W. R. (2013). Evaluating litter decomposition in earth system models with long-term litterbag experiments: an example using the Community Land Model version 4 (CLM4). Global Change Biology, 19(3), 957-974. https://doi.org/https://doi.org/10.1111/gcb.12031 Harmon, M. (2013). LTER Intersite Fine Litter Decomposition Experiment (LIDET), 1990 to 2002. Long-Term Ecological Research. Forest Science Data Bank, Corvallis, OR. [Data set]. Accessed http://andlter.forestry.oregonstate.edu/data/abstract.aspx?dbcode=TD023. https://doi.org/10.6073/pasta/f35f56bea52d78b6a1ecf1952b4889c5. Sulman, B. N., Phillips, R. P., Oishi, A. C., Shevliakova, E., & Pacala, S. W. (2014). Microbe-driven turnover offsets mineral-mediated storage of soil carbon under elevated CO2. Nature Climate Change, 4, 1099 - 1102. https://doi.org/10.1038/nclimate2436

Juice, Stephanie↗

Recent advances in thermal-structural analysis and design

A continuing effort to develop a comprehensive capability for thermal-structural analysis and automated design (sizing) is reviewed. A principal role in the activity is played by the finite element program SPAR which contains both an efficient structural and thermal analysis capability. The benefit of having thermal and structural analyses in the same finite element program is illustrated by the application of SPAR to design calculations for the National Transonic Facility - a cryogenic wind tunnel under construction at Langley. Some experience with large-scale thermal structural analysis problems, particularly the space shuttle orbiter, has led to the identification of some analysis needs. Those needs include automated model generation and data output for lumped parameter thermal analysis, faster solution methods for nonlinear transient heat transfer, automated interpolation of temperature data from a thermal finite element model to a dissimilar structural finite model, and automated techniques to identify the times at which the critical combinations of transient heating and loads occur on a structure.

Adelman, H. M.↗

Comparisons between Nimbus 6 satellite and rawinsonde soundings for several geographical areas

Good agreement between satellite and weighted (linearly interpolated) rawinsonde temperature and temperature derived parameters was found in most instances with the poorest agreement either near the tropopause region or near the ground. However, satellite moisture data are highly questionable. The smallest discrepancy between satellite and weighted mean rawinsonde temperature and parameters derived from temperature was found over water and the largest discrepancy was found over mountains. Cumulative frequency distributions show that discrepancies between satellite and rawinsonde data can be represented by a normal distribution except for dew point temperature.

Cheng, N. M.↗

Comparison of observed and computed brightness temperatures for the HIRS2 and MSU sounders on TIROS-N

Given the radiosonde temperature and humidity profile, brightness temperatures for the temperature sounding IR channels on HIRS 2 were calculated. The temperature profile was interpolated to 53 levels between 1000 and 30 mb assuming temperature to be linear in the logarithm of the pressure between the mandatory levels. The 11 levels above 30 mb were extrapolated according to climatology. The surface was taken to be the climatological sea surface temperature. The specific humidity was interpolated between mandatory levels assuming a p(n) dependence. A specific humidity corresponding to a climatological water vapor mixing ratio of 2 ppmv was assumed at and above 100 mb. Zonally averaged climatological ozone profiles were used to compute the ozone component of the transmittance.

Susskind, J.↗

Thermal bootstrap of matrix quantum mechanics

We implement a bootstrap method that combines stationary state conditions, thermal inequalities, and semidefinite relaxations of matrix logarithm in the ungauged one-matrix quantum mechanics, at finite rank N as well as in the large N limit, and determine finite temperature observables that interpolate between available analytic results in the low and high temperature limits respectively. We also obtain bootstrap bounds on thermal phase transition as well as preliminary results in the ungauged two-matrix quantum mechanics.

1/N Expansion↗

Multigroup Free-atom Doppler-broadening Approximation. Experiment

The multigroup energy Doppler-broadening approximation agrees with continuous energy Dopplerbroadening generally to within ten percent for the total cross sections of 1 H, 56 Fe, and 235 U at 250 lanl. Although this is probably not good enough for broadening from room temperature through the entire temperature range in production use, it is better than any interpolation scheme between temperatures proposed to date, and may be good enough for extrapolation from high temperatures. The method deserves further study since additional improvements are possible.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

On-the-fly Doppler broadening of unresolved resonance region cross sections

In this paper, two methods for computing temperature-dependent unresolved resonance region cross sections on-the-fly within continuous-energy Monte Carlo neutron transport simulations are presented. The first method calculates Doppler broadened cross sections directly from zero-temperature average resonance parameters. In a simulation, at each event that requires cross section values, a realization of unresolved resonance parameters is generated about the desired energy and temperature-dependent single-level Breit-Wigner resonance cross sections are computed directly via the analytical Ψ-x Doppler integrals. The second method relies on the generation of equiprobable cross section magnitude bands on an energy-temperature mesh. Within a simulation, the bands are sampled and interpolated in energy and temperature to obtain cross section values on-the-fly. Both of the methods, as well as their underlying calculation procedures, are verified numerically in extensive code-to-code comparisons. Energy-dependent pointwise cross sections calculated with the newly-implemented procedures are shown to be in excellent agreement with those calculated by a widely-used nuclear data processing code. Relative differences at or below 0.1% are observed. Integral criticality benchmark results computed with the proposed methods are shown to reproduce those computed with a state-of-the-art processed nuclear data library very well. In simulations of fast spectrum systems which are highly-sensitive to the representation of cross section data in the unresolved region, k-eigenvalue and neutron flux spectra differences of <10 pcm and <1.0% are observed, respectively. The direct method is demonstrated to be well-suited to the calculation of reference solutions — against which results obtained with a discretized representation may be assessed — as a result of its treatment of the energy, temperature, and cross section magnitude variables as continuous. Also, because there is no pre-processed data to store (only temperature-independent average resonance parameters) the direct method is very memory-efficient. Typically, only a few kB of memory are needed to store all required unresolved region data for a single nuclide. However, depending on the details of a particular simulation, performing URR cross section calculations on-the-fly can significantly increase simulation times. Alternatively, the method of interpolating equiprobable probability bands is demonstrated to produce results that are as accurate as the direct reference solutions, to within arbitrary precision, with high computational efficiency in terms of memory requirements and simulation time. Analyses of a fast spectrum system show that interpolation on a coarse energy-temperature mesh can be used to reproduce reference k-eigenvalue results obtained with cross sections calculated continuously in energy and directly at an exact temperature to within <10 pcm. Probability band data on a mesh encompassing the range of temperatures relevant to reactor analysis usually require around 100 kB of memory per nuclide. Finally, relative to the case in which probability table data generated at a single, desired temperature are used, minor increases in simulation times are observed when probability band interpolation is employed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Optimal Temperature Grid For Accurate Doppler Kernel Reconstruction

For computational efficiency, both Monte Carlo and deterministic neutron transport codes often rely on pre-tabulated cross section sets and simple interpolation schemes to represent the Doppler broadening of the cross sections at a needed temperature. Accurate accounting of Doppler effects is of paramount importance for reactor analysis since it impacts the power distribution and the reactor response during transients. Temperature interpolation methods for Doppler broadening have traditionally been physically motivated engineering curve-fits, selected upon best-performance criteria on important nuclides. Kernel reconstruction methods have recently been introduced to perform fast and efficient Doppler broadening interpolation as the result of an optimization problem,, . Out of all the possible kernels analyzed, the temperature-optimized free Doppler kernel reconstruction method was shown to significantly outperform traditional Doppler broadening interpolation methods. Detailed derivations will be part of an upcoming journal paper. In this article, key formulae and results for performing free Doppler kernel reconstruction are summarized, and a study of the optimal temperature grid (T{sub j}) selection is presented. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Jackson, L., Johnson, M.B., Latrach, A., Grimes, D., Martinez, C., and Mclaughlin, J.F., 2024, Multidisciplinary geotechnical data collection, curation, and analysis for conformity with the regulatory framework for geologic carbon storage in Wyoming, USA: Geological Society of America Abstracts with Programs. Vol. 56, No. 5, 2024, doi: 10.1130/abs/2024AM-405024

Title: Multidisciplinary Geotechnical Data Collection, Curation, and Analysis for Conformity with the Regulatory Framework for Geologic Carbon Storage in Wyoming, USA. Text: Construction and operation of wells for geologic sequestration of carbon dioxide necessitate that they are permitted under the Environmental Protection Agency’s Underground Injection Control Class VI requirements. Class VI wells conform to stringent requirements to ensure long-term safety and integrity of the storage site and the protection of Underground Sources of Drinking Water. Entities pursuing Class VI permitting must provide comprehensive geologic site characterization, including regional geologic structure and stratigraphy, aquifer information, reservoir and confining unit geomechanical properties, geochemical analyses, assessment of trapping capacity and mechanisms, and a variety of other of multidisciplinary geotechnical data. The Wyoming Class VI Site Characterization Database Project is focused on developing a geologic site characterization database of geotechnical information, which has been compiled and verified from established, public databases/entities and scientific literature to expedite Class VI permitting in Sweetwater County within the Greater Green River Basin of southern Wyoming. The preliminary suite of compiled data from 14,000 wells includes 8,000 wells with logs and 7,250 wells with formation tops, ~70 wells with core data (e.g., X-Ray diffraction, petrographic, and petrophysical data), ~2,500 water analyses, ~740 seismic events data, and ~520 bottom-hole temperature measurements. Future work on—and stemming from—this project will include new core analyses, calculation and interpolation of subsurface temperature gradients, mechanical earth models, geochemical simulations, storage capacity estimation, stratigraphic column generation and correlation, and construction of subsurface maps. Finally, this work will help to inspire and facilitate subsurface data compilation and curation beyond Sweetwater County, Wyoming.

42 ENGINEERING↗

Monochromatic calculations of atmospheric radiative transfer due to molecular line absorption

Sensitivity studies related to the effects of line cutoff, spectral resolution, and temperature and pressure interpolations in radiative transfer have been performed so that a data set of absorption coefficients for water vapor, CO2, and O3 may be created efficiently. Results show that computations of absorption coefficients are affected only slightly by cutting a line off at a wave number 190 times the Lorentz half width from the center, or equivalently, cutting off 0.33 percent of the line intensity from the wings. To achieve a relative cooling rate error smaller than 2 percent, it is sufficient to precompute the absorption coefficient at three temperatures (210, 250, and 290 K) and 19 pressures with Delta (log 10 p) = 0.2. The absorption coefficient at other conditions can be interpolated linearly with pressure and exponentially with a quadratic in temperature. For the spectral resolution the absorption coefficients can be adequately computed at 0.01, 0.002, 0.005, and 0.025/cm intervals in the thermal water vapor, the CO2 and O3 bands, and the solar water vapor bands, respectively, which limits the error to only a few percent in the cooling and heating rates. Using the precomputed absorption coefficients, repeated monochromatic calculations of atmospheric heating/cooling rates for radiation model developments and for comparison with less detailed calculations are no longer difficult.

Chou, M.-D.↗

Stratocumulus cloud height variations determined from surface and satellite observations

Determination of cloud-top heights from satellite-inferred cloud-top temperatures is a relatively straightforward procedure for a well-behaved troposphere. The assumption of a monotonically decreasing temperature with increasing altitude is commonly used to assign a height to a given cloud-top temperature. In the hybrid bispectral threshold method, or HBTM, Minnis et al. (1987) assume that the lapse rate for the troposphere is -6.5/Kkm and that the surface temperature which calibrated this lapse rate is the 24 hour mean of the observed or modeled clear-sky, equivalent blackbody temperature. The International Satellite Cloud Climatology Project (ISCCP) algorithm (Rossow et al., 1988) attempts a more realistic assignment of height by utilizing interpolations of analyzed temperature fields from the National Meteorological Center (NMC) to determine the temperature at a given level over the region of interest. Neither these nor other techniques have been tested to any useful extent. The First ISCCP Regional Experiment (FIRE) Intensive Field Observations (IFO) provide an excellent opportunity to assess satellite-derived cloud height results because of the availability of both direct and indirect cloud-top altitude data of known accuracy. The variations of cloud-top altitude during the Marine Stratocumulus IFO (MSIFO, June 29 to July 19, 1987) derived from surface, aircraft, and satellite data are examined.

Minnis, Patrick↗

Real-time modeling of heat distributions

Techniques for real-time modeling temperature distributions based on streaming sensor data are provided. In one aspect, a method for creating a three-dimensional temperature distribution model for a room having a floor and a ceiling is provided. The method includes the following steps. A ceiling temperature distribution in the room is determined. A floor temperature distribution in the room is determined. An interpolation between the ceiling temperature distribution and the floor temperature distribution is used to obtain the three-dimensional temperature distribution model for the room.

99 GENERAL AND MISCELLANEOUS↗

Optimal Temperature Grid for Accurate Doppler Kernel Reconstruction

For computational efficiency, both Monte Carlo and deterministic neutron transport codes often rely on pre-tabulated cross section sets and simple interpolation schemes to represent the Doppler broadening of the cross sections at a needed temperature. Accurate accounting of Doppler effects is of paramount importance for reactor analysis since it impacts the power distribution and the reactor response during transients. Temperature interpolation methods for Doppler broadening have traditionally been physically motivated engineering curve-fits, selected upon best-performance criteria on important nuclides.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗