Search NASA⌕ Search

SEARCH · Search NASA

Results for “tensor methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

In flight estimations of Cassini spacecraft inertia tensor and thruster magnitude

This paper describes two methods used by the Cassini Attitude Control team to determine these key parameters and how flight telemetry was used to estimate them. The method for estimating the spacecraft inertia tensor exploits the conservation of angular momentum during spacecraft slews under reaction wheel control.

inertia properties↗

On the dynamics of a human body model.

Equations of motion for a model of the human body are developed. Basically, the model consists of an elliptical cylinder representing the torso, together with a system of frustrums of elliptical cones representing the limbs. They are connected to the main body and each other by hinges and ball and socket joints. Vector, tensor, and matrix methods provide a systematic organization of the geometry. The equations of motion are developed from the principles of classical mechanics. The solution of these equations then provide the displacement and rotation of the main body when the external forces and relative limb motions are specified. Three simple example motions are studied to illustrate the method. The first is an analysis and comparison of simple lifting on the earth and the moon. The second is an elementary approach to underwater swimming, including both viscous and inertia effects. The third is an analysis of kicking motion and its effect upon a vertically suspended man such as a parachutist.

Huston, R. L.↗

Closure of the cubic tensor polynomial failure surface

An analytical method has been developed to ensure closure of the cubic form of the tensor polynomial strength criterion. The intrinsic complexity of the cubic function is such that special conditions must be met to close the failure surface in three-dimensional stress space. These requirements are derived in terms of non-intersecting conditions for asymptotes and an asymptotic plane. To demonstrate the validity of this approach, closed failure surfaces were derived for two graphite/epoxy material systems (3M SP288-T300 and IM7 8551-7). The agreement of test data with this model clearly shows that it is possible to use a higher order cubic failure theory with confidence.

Jiang, Zhiqing↗

Tensor-Product Preconditioners for Higher-Order Space-Time Discontinuous Galerkin Methods

space-time discontinuous-Galerkin spectral-element discretization is presented for direct numerical simulation of the compressible Navier-Stokes equat ions. An efficient solution technique based on a matrix-free Newton-Krylov method is developed in order to overcome the stiffness associated with high solution order. The use of tensor-product basis functions is key to maintaining efficiency at high order. Efficient preconditioning methods are presented which can take advantage of the tensor-product formulation. A diagonalized Alternating-Direction-Implicit (ADI) scheme is extended to the space-time discontinuous Galerkin discretization. A new preconditioner for the compressible Euler/Navier-Stokes equations based on the fast-diagonalization method is also presented. Numerical results demonstrate the effectiveness of these preconditioners for the direct numerical simulation of subsonic turbulent flows.

Diosady, Laslo T.↗

Visualization of 2-D and 3-D Tensor Fields

In previous work we have developed a novel approach to visualizing second order symmetric 2-D tensor fields based on degenerate point analysis. At degenerate points the eigenvalues are either zero or equal to each other, and the hyperstreamlines about these points give rise to trisector or wedge points. These singularities and their connecting hyperstreamlines determine the topology of the tensor field. In this study we are developing new methods for analyzing and displaying 3-D tensor fields. This problem is considerably more difficult than the 2-D one, as the richness of the data set is much larger. Here we report on our progress and a novel method to find, analyze and display 3-D degenerate points. First we discuss the theory, then an application involving a 3-D tensor field, the Boussinesq problem with two forces.

Hesselink, Lambertus↗

Visualization of 2-D and 3-D Tensor Fields

In previous work we have developed a novel approach to visualizing second order symmetric 2-D tensor fields based on degenerate point analysis. At degenerate points the eigenvalues are either zero or equal to each other, and the hyper-streamlines about these points give rise to tri-sector or wedge points. These singularities and their connecting hyper-streamlines determine the topology of the tensor field. In this study we are developing new methods for analyzing and displaying 3-D tensor fields. This problem is considerably more difficult than the 2-D one, as the richness of the data set is much larger. Here we report on our progress and a novel method to find , analyze and display 3-D degenerate points. First we discuss the theory, then an application involving a 3-D tensor field, the Boussinesq problem with two forces.

Hesselink, Lambertus↗

Incompressible fluid ellipsoids in halos. I - The second-harmonic oscillations of the Maclaurin spheroids

The structure and stability of Maclaurin spheroids embedded in rigid uniform-density oblate spheroidal halos are determined by the tensor virial-equation method. These spheroid-halo systems can be thought of as crude fluid analogs of disk galaxies with halos. The halos are assumed to have the same center, the same axis of symmetry, and the same equatorial radius as the Maclaurin spheroids. Only halos with lower eccentricity than the Maclaurin spheroids are considered. The dynamic instability of the toroidal (barlike) modes is suppressed when m, the ratio of the halo mass to Maclaurin spheroid mass, is greater than 3 pi/8 for spherical halos and when m is greater than 1/2 for halos congruent to the Maclaurin spheroids. Intermediate halo flattenings yield intermediate critical m-values. On the other hand, a neutral point of the toroidal modes in the rotating and inertial frames occurs for all m and for all allowed halo flattenings. Growth rates for secular instability beyond the neutral point are calculated, and the eigenfrequencies of all second-harmonic modes are given for select cases. The Ostriker-Peebles (1973) conjecture concerning the stability of disk galaxies against barlike perturbations appears to be incorrect.

Durisen, R. H.↗

Dipole-field sums and Lorentz factors for orthorhombic lattices, and implications for polarizable molecules

A method for computing the Lorentz tensor components in single crystals via rapidly convergent sums of Bessels functions is developed using the relationship between dipole-field sums and the tensor components. The Lorentz factors for simple, body-centered, and base-centered orthorhombic lattices are computed using this method, and the derivative Lorentz factors for simple orthorhombic lattices are also determined. Both the Lorentz factors and their derivatives are shown to be very sensitive to a lattice structure. The equivalent of the Clausius-Mossotti relation for general orthorhombic lattices is derived using the Lorentz-factor formalism, and the permanent molecular dipole moment is related to crystal polarization for the case of a ferroelectric of polarizable point dipoles. It is concluded that the polarization enhancement due to self-polarization familiar from classical theory may actually be a reduction in consequences of negative Lorentz factors in one or two lattice directions for noncubic crystals.

Purvis, C. K.↗

Alternatives for jet engine control

Research centered on basic topics in the modeling and feedback control of nonlinear dynamical systems is reported. Of special interest were the following topics: (1) the role of series descriptions, especially insofar as they relate to questions of scheduling, in the control of gas turbine engines; (2) the use of algebraic tensor theory as a technique for parameterizing such descriptions; (3) the relationship between tensor methodology and other parts of the nonlinear literature; (4) the improvement of interactive methods for parameter selection within a tensor viewpoint; and (5) study of feedback gain representation as a counterpart to these modeling and parameterization ideas.

Sain, M. K.↗

A finite element tensor approach to plate buckling and postbuckling.

A practical finite element method is presented for geometrically nonlinear (von Karman) plate problems. Symmetric strain energy tensors provide an efficient formulation and solution, and allow the effects of initial imperfections to be considered. An unbalanced force iteration is employed, with the advantage that the time consuming Gauss decomposition needs to be performed only once. The convergence is controlled by an automatically computed relaxation factor, and this makes the method applicable in advanced stages of non-linearity. Several different triangular elements are used in explicitly deriving the required tensors.

Vos, R. G.↗

Algebraic grid generation using tensor product B-splines

Finite difference methods are more successful if the accompanying grid has lines which are smooth and nearly orthogonal. The development of an algorithm which produces such a grid when given the boundary description. Topological considerations in structuring the grid generation mapping are discussed. The concept of the degree of a mapping and how it can be used to determine what requirements are necessary if a mapping is to produce a suitable grid is examined. The grid generation algorithm uses a mapping composed of bicubic B-splines. Boundary coefficients are chosen so that the splines produce Schoenberg's variation diminishing spline approximation to the boundary. Interior coefficients are initially chosen to give a variation diminishing approximation to the transfinite bilinear interpolant of the function mapping the boundary of the unit square onto the boundary grid. The practicality of optimizing the grid by minimizing a functional involving the Jacobian of the grid generation mapping at each interior grid point and the dot product of vectors tangent to the grid lines is investigated. Grids generated by using the algorithm are presented.

Saunders, B. V.↗

Stress computation in displacement methods for two-material elastic media

The method of best fit strain tensors is extended to compute the stresses satisfying the conditions of equilibrium, compatibility, and constitutive relationships. It is assumed that the deflections at the mesh points have already been computed with acceptable accuracy. Results of examples presented show better accuracy than the usual procedure, in which equilibrium conditions are not enforced. Special emphasis is placed here upon two-material elastic media.

Salama, M.↗

Automated time-resolved data acquisition during static and dynamic loading of composite materials

This paper reports the development of two new nondestructive techniques for precise determination of the nature and extent of complex damage and the consequent redistribution of stress in composite materials during quasi-static and cyclic or dynamic loading. The two methods incorporate video-thermography and four-component tensor elastic modulus determination. The experimental and analytical aspects of these two methods are discussed and data is presented.

Reifsnieder, K. L.↗

Empirical source noise prediction method with application to subsonic coaxial jet mixing noise

A general empirical method, developed for source noise predictions, uses tensor splines to represent the dependence of the acoustic field on frequency and direction and Taylor's series to represent the dependence on source state parameters. The method is applied to prediction of mixing noise from subsonic circular and coaxial jets. A noise data base of 1/3-octave-band sound pressure levels (SPL's) from 540 tests was gathered from three countries: United States, United Kingdom, and France. The SPL's depend on seven variables: frequency, polar direction angle, and five source state parameters: inner and outer nozzle pressure ratios, inner and outer stream total temperatures, and nozzle area ratio. A least-squares seven-dimensional curve fit defines a table of constants which is used for the prediction method. The resulting prediction has a mean error of 0 dB and a standard deviation of 1.2 dB. The prediction method is used to search for a coaxial jet which has the greatest coaxial noise benefit as compared with an equivalent single jet. It is found that benefits of about 6 dB are possible.

Zorumski, W. E.↗

Turbulent diffusivity

A method for determining the turbulent diffusivity tensor is proposed which has application to problems such as the mixing in the interior of the sun for the solar neutrino problem, the chemical evolution of the galaxy, and grain sedimentation on the primitive solar nebula. A model for determining the turbulent energy spectral function, the eddy decorrelation rate, and the growth rate of the underlying instability is discussed. Good agreement is obtained between the present values for the coefficient of turbulent diffusivity and those obtained from both numerical simulation studies and laboratory data on shear turbulence.

Canuto, V. M.↗

Microwave Scattering Model for Grass Blade Structures

In this paper, the electromagnetic scattering solution for a grass blade with complex cross-section geometry is considered. It is assumed that the blade cross section is electrically small, but its length is large compared to the incident wavelength. In a recent study it has been shown that the scattering solution for such problems, in the form of a polarizability tensor, can be obtained using the low-frequency approximation in conjunction with the method of moments. In addition, the study shows that the relationship between the polarizability tensor of a dielectric cylinder and its dielectric constant can be approximated by a simple algebraic expression. The results of this study are used to show that this algebraic approximation is valid also for cylinders with cross sections the shape of grass blades, providing that proper values am selected for each of three constants appearing in the expression. These constants are dependent on cylinder shape, and if the relationship between the constants and the three parameters describing a grass blade shape can be determined, an algebraic approximation relating polarizability tensor to blade shape, as well as dielectric constant, can be formed. Since the elements of the polarizability tensor are dependent on only these parameters, this algebraic approximation can replace the cumbersome method of moments model. A conjugate gradient method is then implemented to correctly determine the three constants of the algebraic approximation for each blade shape. A third-order polynomial fit to the data is then determined for each constant, thus providing a complete analytic replacement to the numerical (moment method) scattering model. Comparisons of this approximation to the numerical model show an average error of less than 3%.

Stiles, James M.↗

A new look at numerical analyses of free-edge stresses in composite laminates

The edge stress problem for a + or - 45 deg graphite/epoxy laminate was examined. The reliability of the displacement formulated finite element method in analyzing the edge stress problem was investigated. Analyses of two well known elasticity problems, one involving a stress discontinuity and one a singularity, showed that the finite element analysis yields accurate stress distributions everywhere except in two elements closest to the stress discontinuity of singularity. Stress distributions for a + or - 45 deg laminate showed the same behavior near the singularity found in the well known problems with exact solutions. The displacement formulated finite element method appears to be a highly accurate technique for calculating interlaminar stress in composite laminates. The disagreement among the numerical methods was attributed to the unsymmetric stress tensor at the singularity.

Raju, I. S.↗