Search NASA⌕ Search

SEARCH · Search NASA

Results for “texturization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Texture crossover : trace from multiple grains to a subgrain.

Neutron and synchrotron X-ray diffractions were used to study the texture development in the face-centered-cubic nickel-based superalloy over gauge volumes ranging from hundreds of cubic millimeters down to sub-cubic micrometers. The bulk averaged results find a uniform texture development from collective slip. However, X-ray microbeam studies at microscale find that the plastic deformation within a single grain is mediated by limited slip, as evidenced by the local strain distribution. Polychromatic microdiffraction shows the formation of several distinct structural zones even in the same grain. A hierarchical heterogeneous geometrically-necessary dislocations arrangement and distinct slip bands are observed within each grain. A depth-dependent change of the stereographic projection within the slip band in the grain is demonstrated. Correlated oscillations of the lattice orientation at the submicron scale evolve into an overall texture at the macroscale. Possible reasons for this observed structural evolution are discussed.

36 MATERIALS SCIENCE↗

Investigation into Texture and Structure of MA2-1PCh Magnesium Alloy after Equal Channel Angular Extrusion and Annealing by Quantitative X-Ray Texture Analysis and Electron Backscatter Diffraction

This article discusses application of quantitative X-ray texture analysis (QTXA) based on measurement of direct pole figures and electron backscatter diffraction (EBSD) aimed at study of peculiarities of formation of texture and structure of MA2-1pch magnesium alloy after equal channel angular extrusion (ECAE) and subsequent annealing. Shear bands with the width of 60 μm oriented at 45°–50° to the extrusion direction are revealed, where an inclined scattered basis texture is detected, and outside of these bands, a prismatic texture. As a consequence, basic sliding is activated in the shear bands, which is confirmed by the distribution of Schmid factors. The influence of texture and orientation of shear bands on anisotropy of strength mechanical properties of alloy is discussed.

36 MATERIALS SCIENCE↗

Texture Development and Stress–Strain Partitioning in Periclase + Halite Aggregates

Multiphase materials are widely applied in engineering due to desirable mechanical properties and are of interest to geoscience as rocks are multiphase. High-pressure mechanical behavior is important for understanding the deep Earth where rocks deform at extreme pressure and temperature. In order to systematically study the underlying physics of multiphase deformation at high pressure, we perform diamond anvil cell deformation experiments on MgO + NaCl aggregates with varying phase proportions. Lattice strain and texture evolution are recorded using in-situ synchrotron x-ray diffraction and are modeled using two-phase elasto-viscoplastic self-consistent (EVPSC) simulations to deduce stress, strain, and deformation mechanisms in individual phases and the aggregate. Texture development of MgO and NaCl are affected by phase proportions. In NaCl, a (100) compression texture is observed when small amounts of MgO are present. In contrast, when deformed as a single phase or when large amounts of MgO are present, NaCl develops a (110) texture. Stress and strain evolution in MgO and NaCl also show different trends with varying phase proportions. Based on the results from this study, we construct a general scheme of stress evolution as a function of phase proportion for individual phases and the aggregate.

Lin, Feng↗

Temperature-Dependent Mechanical Anisotropy in Textured Zircaloy Cladding

This work evaluates deformation activity in textured zircaloy-4 cladding with the aim of elucidating the mechanisms that govern mechanical behavior across a temperature range anticipated in reactor service. In particular, the dependence of mechanical anisotropy on temperature and stress state (ratio of applied stresses) is examined via uniaxial and biaxial tensile experiments at room temperature and 400 °C. The mechanical behavior was interpreted based on micro-texture and dominant slip system activity. Thermal activation of basal systems is found as a key mechanism affecting mechanical behavior across the temperature range. The biaxial stress states produce resolved shear stresses contrasting to uniaxial stress states. As a result, mechanical testing and implications for reactor pellet-cladding mechanical interaction stress conditions are discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Phase formation and texture of thin nickel germanides on Ge(001) and Ge(111)

We studied the solid-phase reaction between a thin Ni film and a single crystal Ge(001) or Ge(111) substrate during a ramp anneal. The phase formation sequence was determined using in situ X-ray diffraction and in situ Rutherford backscattering spectrometry (RBS), while the nature and the texture of the phases were studied using X-ray pole figures and transmission electron microscopy. The phase sequence is characterized by the formation of a single transient phase before NiGe forms as the final and stable phase. X-ray pole figures were used to unambiguously identify the transient phase as the ϵ-phase, a non-stoichiometric Ni-rich germanide with a hexagonal crystal structure that can exist for Ge concentrations between 34% and 48% and which forms with a different epitaxial texture on both substrate orientations. The complementary information gained from both RBS and X-ray pole figure measurements revealed a simultaneous growth of both the ϵ-phase and NiGe over a small temperature window on both substrate orientations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural, chemical and textural characterization of ZnO nanorods synthesized by aerosol assisted chemical vapor deposition

ZnO nanorods were synthesized by aerosol assisted chemical vapor deposition onto TiO{sub 2} covered borosilicate glass substrates. Deposition parameters were optimized and kept constant. Solely the effect of different nozzle velocities on the growth of ZnO nanorods was evaluated in order to develop a dense and uniform structure. The crystalline structure was characterized by conventional X-ray diffraction in grazing incidence and Bragg–Brentano configurations. In addition, two-dimensional grazing incidence synchrotron radiation diffraction was employed to determine the preferred growth direction of the nanorods. Morphology and growth characteristics analyzed by electron microscopy were correlated with diffraction outcomes. Chemical composition was established by X-ray photoelectron spectroscopy. X-ray diffraction results and X-ray photoelectron spectroscopy showed the presence of wurtzite ZnO and anatase TiO{sub 2} phases. Morphological changes noticed when the deposition velocity was lowered to the minimum, indicated the formation of relatively vertically oriented nanorods evenly distributed onto the TiO{sub 2} buffer film. By coupling two-dimensional X-ray diffraction and computational modeling with ANAELU it was proved that a successful texture determination was achieved and confirmed by scanning electron microscopy analysis. Texture analysis led to the conclusion of a preferred growth direction in [001] having a distribution width Ω = 20° ± 2°. - Highlights: • Uniform and pure single-crystal ZnO nanorods were obtained by AACVD technique. • Longitudinal and transversal axis parallel to the [001] and [110] directions, respectively. • Texture was determined by 2D synchrotron diffraction and electron microscopy analysis. • Nanorods have its [001] direction distributed close to the normal of the substrate. • Angular spread about the preferred orientation is 20° ± 2°.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Texture analysis of AGR program matrix materials

We report the fuel form for high-temperature gas-cooled reactors consists of tristructural isotropic (TRISO) particles embedded in a matrix of graphite flake and carbonized resin. The process of overcoating particles prior to compacting yields a circumferential orientation of the graphite flake surrounding the TRISO particles, which is modified to varied extents when overcoated particles are pressed into the final fuel form. As graphite is highly anisotropic, the texture may impact the properties and performance of the fuel. Ellipsometry was used to measure the texture of the matrix for fueled compacts and unfueled “matrix-only” samples. Results indicated local texture related to the spherical particles in compacts associated with overcoating versus a more linear layered structure in “matrix-only” samples.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Phase Formation and Texture of Nickel Silicides on Si1-xCx Epilayers

We investigated the phase formation and texture of nickel silicides formed during the reaction of 10 nm sputter deposited nickel with Si1-xCx epitaxial layers on Si(1 0 0) substrates, having a carbon content between 0 and 2.5 atomic percent. It was found that both the formation temperature as well as the texture of the metal-rich phases is influenced by the amount of carbon in the Si1-xCx layer. To determine the influence of the location of the carbon during the silicidation process we also investigated the reaction of 10 nm nickel on Si(1 0 0) substrates, where carbon was either alloyed in the nickel layer or deposited as an interlayer at the interface between the nickel and the substrate. Depending on the location of the carbon, a different thermal stability of the layer was found.

36 MATERIALS SCIENCE↗

Experimental method for in situ determination of material textures at simultaneous high pressure and high temperature by means of radial diffraction in the diamond anvil cell

We introduce the design and capabilities of a resistive heated diamond anvil cell that can be used for side diffraction at simultaneous high pressure and high temperature. The device can be used to study lattice-preferred orientations in polycrystalline samples up to temperatures of 1100 K and pressures of 36 GPa. Capabilities of the instrument are demonstrated with preliminary results on the development of textures in the bcc, fcc, and hcp polymorphs of iron during a nonhydrostatic compression experiment at simultaneous high pressure and high temperature.

36 MATERIALS SCIENCE↗

Texture evolution in nanocrystalline iron films deposited using biased magnetron sputtering

Fe thin films were deposited on sodium chloride (NaCl) substrates using magnetron sputtering to investigate means of texture control in free standing metal films. The Fe thin films were studied using transmission electron microscopy equipped with automated crystallographic orientation microscopy. Using this technique, the microstructure of each film was characterized in order to elucidate the effects of altering deposition parameters. The natural tendency for Fe films grown on (100) NaCl is to form a randomly oriented nanocrystalline microstructure. By careful selection of substrate and deposition conditions, it is possible to drive the texture of the film toward a single (100) orientation while retaining the nanocrystalline microstructure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Texture measurements on quartz single crystals to validate coordinate systems for neutron time-of-flight texture analysis

In crystallographic texture analysis, ensuring that sample directions are preserved from experiment to the resulting orientation distribution is crucial to obtain physical meaning from diffraction data. This work details a procedure to ensure instrument and sample coordinates are consistent when analyzing diffraction data with a Rietveld refinement using the texture analysis software MAUD . A quartz crystal is measured on the HIPPO diffractometer at Los Alamos National Laboratory for this purpose. The methods described here can be applied to any diffraction instrument measuring orientation distributions in polycrystalline materials.

36 MATERIALS SCIENCE↗

Origin of sulfide replacement textures in lunar breccias. Implications for vapor element transport in the lunar crust

Lunar samples 67016,294, 67915,150, and 67016,297 represent clasts of Mg-suite and ferroan anorthosite lithologies that have interacted with a S-rich vapor. Numerous studies have speculated on the composition and source of these 'fluids', their capability for the transport of vapor-mobilized elements, and the scale and environment under which these types of process occurred. These models all assumed a Moon with a very 'dry' mantle, crust, and surface. The olivine in these lithologies is partially to totally replaced by troilite and low-Ca pyroxene. The troilite makes up 30-54 vol% of the troilite + low-Ca pyroxene pseudomorphs after olivine. Other silicates and oxides in the assemblages have experienced post-magmatic reequilibration (pyroxene exsolution, recrystallization, 'exsolution' of ilmenite in spinel). The troilite also occurs in veins cross cutting individual phases and metamorphic textures. The sulfide veining and replacement features are restricted to individual clasts and do not cut across the matrix surrounding the clasts, and thus predate the breccia-forming event. The proportion of troilite to low-Ca pyroxene and silicate chemistries indicate that simple reactions (such as olivine + S{sub 2} {leftrightarrow} low-Ca pyroxene + troilite + O{sub 2}) do not adequately represent the replacement process. The sulfides have compositions that are similar to those found in mare basalts. In particular, the sulfides generally are enriched in Co relative to Ni. Exsolution of Ni-Co-Cu in the sulfides is distinctly different between the breccias and mare basalts and suggests a different cooling or crystallization (melt versus vapor) history. The sulfur isotopic composition of the vein and replacement troilite ranges from approximately {delta}{sup 34}S = -1.0{per_thousand} to -3.3{per_thousand}. Based on our observations, it appears that the model suggested by Norman et al. (1995) is the most appropriate for the origin of the troilite veining and troilite-pyroxene pseudomorphs after olivine. Our data add significant definition to this model. This process occurs in the relatively shallow lunar crust on a scale that involves vapor interaction with multiple plutonic lithologies of various ages and compositions. These reactions occur at distinct conditions of f{sub S{sub 2}}, f{sub O{sub 2}}, and temperature. The reacting vapor is S-rich, and perhaps low in H. The reduction of the oxides in the clasts was not a product of H-streaming as has been suggested for similar textures in lunar rocks, but more likely related to 'S-streaming'. These vapors had the capability to transport chalcophile-siderophile elements. However, a proportion of the minor elements making up the troilite (Fe, Ni, Co) did come directly from the olivine being replaced. Further, there is evidence to suggest minor mobility of Mg from the olivine pseudomorphs into the adjacent pyroxene. One of the heat sources driving the transport of elements is closely tied to the emplacement of magmas into the shallow lunar crust. These intrusions were either the source for the S or provided heat to remobilized troilite already in the lunar crust. The process that drove the derivation of the S-rich volatiles was instrumental in fractionating the isotopic composition of S. The enrichment of S{sup 32} in the vapor phase may be attributed to either the stable S species during degassing (COS, S{sub 2} and CS{sub 2}) or the high-temperature partial breakdown of troilite in the shallow crust.

58 GEOSCIENCES↗