SEARCH · Search NASA
Results for “thermal diffusivity”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Measuring Thermal Diffusivity of Molten Semiconductors
Thermal diffusivity of molten and solid mercury cadmium telluride measured with aid of new apparatus. Knowledge gained from such measurements help efforts to grow high-quality single crystals of this semiconductor for use in infrared detectors: Without knowledge of thermal diffusivity, difficult to control growth rate of solid from molten material.
Validation of miniature test specimens for post-irradiation thermal diffusivity measurement
Radioactivity levels for conventional thermal diffusivity test specimens are often prohibitively high for examination with candidate metallic materials, such as tungsten and reduced activation steels for fusion energy. Therefore, in the ongoing Japan–US PHENIX project, irradiation in the high flux isotope reactor (HFIR) was performed with the miniature specimen form of diameter (D) 3 mm × thickness (T) 1/2 mm small disk for thermal diffusivity measurement. In this study, the thermal diffusivity measurement of this miniature specimen is validated using a Netzsch LFA-467 ‘Hyper Flash’ thermal analyzer and ‘graphene nanoplatelets containing agent’. Finally, with careful surface treatment and data analysis, the miniature specimens showed almost the same value as the diameter 10 mm standard specimens.
Thermal diffusivity measurements using a pulsed dual-beam thermal lens technique
A novel pulsed dual-beam thermal lens technique for the determination of thermal diffusivity of liquids and solids was developed. In this technique a transient thermal lens is formed in the test specimen by using a dye laser pulse as a heating source and the thermal lens decay is monitored by means of a CW He-Ne laser. The technique is fast and contactless and avoids some of the major difficulties of conventional methods. Thermal diffusivities for water and a polycarbonate plastic were measured and found to be in agreement with literature values. Considerable simplification and minimization of certain errors was achieved by use of a reference material.
An extended laser flash technique for thermal diffusivity measurement of high-temperature materials
Knowledge of thermal diffusivity data for high-temperature materials (solids and liquids) is very important in analyzing a number of processes, among them solidification, crystal growth, and welding. However, reliable thermal diffusivity versus temperature data, particularly those for high-temperature liquids, are still far from complete. The main measurement difficulties are due to the presence of convection and the requirement for a container. Fortunately, the availability of levitation techniques has made it possible to solve the containment problem. Based on the feasibility of the levitation technology, a new laser flash technique which is applicable to both levitated liquid and solid samples is being developed. At this point, the analysis for solid samples is near completion and highlights of the technique are presented here. The levitated solid sample which is assumed to be a sphere is subjected to a very short burst of high power radiant energy. The temperature of the irradiated surface area is elevated and a transient heat transfer process takes place within the sample. This containerless process is a two-dimensional unsteady heat conduction problem. Due to the nonlinearity of the radiative plus convective boundary condition, an analytic solution cannot be obtained. Two options are available at this point. Firstly, the radiation boundary condition can be linearized, which then accommodates a closed-form analytic solution. Comparison of the analytic curves for the temperature rise at different points to the experimentally-measured values will then provide the thermal diffusivity values. Secondly, one may set up an inverse conduction problem whereby experimentally obtained surface temperature history is used as the boundary conditions. The thermal diffusivity can then be elevated by minimizing the difference between the real heat flux boundary condition (radiation plus convection) and the measurements. Status of an experimental study directed at measuring the thermal diffusivity of high-temperature solid samples of pure Nickel and Inconel 718 superalloys are presented. Preliminary measurements showing surface temperature histories are discussed.
The study of frequency-scan photothermal reflectance technique for thermal diffusivity measurement
A frequency scan photothermal reflectance technique to measure thermal diffusivity of bulk samples is studied in this manuscript. Similar to general photothermal reflectance methods, an intensity-modulated heating laser and a constant intensity probe laser are used to determine the surface temperature response under sinusoidal heating. The approach involves fixing the distance between the heating and probe laser spots, recording the phase lag of reflected probe laser intensity with respect to the heating laser frequency modulation, and extracting thermal diffusivity using the phase lag – (frequency) 1/2 relation. The experimental validation is performed on three samples (SiO 2 , CaF 2 and Ge), which have a wide range of thermal diffusivities. The measured thermal diffusivity values agree closely with literature values. Lastly, compared to the commonly used spatial scan method, the experimental setup and operation of the frequency scan method are simplified, and the uncertainty level is equal to or smaller than that of the spatial scan method.
Perturbative thermal diffusivity from partial sawtooth crashes in Alcator C-Mod
Perturbative thermal diffusivity has been measured on Alcator C-Mod via the use of the extended-time-to-peak method on heat pulses generated by partial sawtooth crashes. Perturbative thermal diffusivity governs the propagation of heat pulses through a plasma. It differs from power balance thermal diffusivity, which governs steady state thermal transport. Heat pulses generated by sawtooth crashes have been used extensively in the past to study heat pulse thermal diffusivity, but the details of the sawtooth event typically lead to non-diffusive 'ballistic' transport, making them an unreliable measure of perturbative diffusivity on many tokamaks. Partial sawteeth are common on numerous tokamaks, and generate a heat pulse without the 'ballistic' transport that often accompanies full sawteeth. This is the first application of the extended-time-to-peak method of diffusivity calculation to partial sawtooth crashes. Furthermore, this analysis was applied to over 50 C-Mod shots containing both L- and I-Mode. Results indicate correlations between perturbative diffusivity and confinement regime (L- versus I-mode), as well as correlations with local temperature, density, the associated gradients, and gradient scale lengths (a/L Te and a/L n ). In addition, diffusivities calculated from partial sawteeth are compared to perturbative diffusivities calculated with the nonlinear gyrokinetic code GYRO. We find that standard ion-scale simulations (ITG/TEM turbulence) under-predict the perturbative thermal diffusivity, but new multi-scale (ITG/TEM coupled with ETG) simulations can match the experimental perturbative diffusivity within error bars for an Alcator C-Mod L-mode plasma. Perturbative diffusivities extracted from heat pulses due to partial sawteeth provide a new constraint that can be used to validate gyrokinetic simulations.
A reduced thermal diffusion model for H and H 2
Here this work details the development of a new, reduced thermal diffusion model. The proposed model derives from the thermal diffusion model of Chapman and Cowling (1970). In its derivation, a set of mixture-averaged like approximations are made, which results in the number of operations being reduced from $\mathscr{O}$($\mathcal{n}^2$) to sub-linear, where n is the number of species in the chemical model. With these approximations, the new, reduced model thermal diffusion coefficients can be calculated independently for each species. The model is validated against multicomponent thermal diffusion cases using multiple fuel and diluent mixtures at various pressures, temperatures, and equivalence ratios. The resulting reduced model thermal diffusion fluxes agree well with the multicomponent values, with a multiplicative scaling factor identified using a least squares regression. Unstretched laminar flame speeds are compared using the multicomponent and newly developed models. Finally, an a posteriori comparison in a turbulent configuration shows excellent agreement of both the mean and fluctuations of the thermal diffusion coefficients.
Validation of a mixture-averaged thermal diffusion model for premixed lean hydrogen flames
The mixture-averaged thermal diffusion model originally proposed by Chapman and Cowling is validated using multiple flame configurations. Simulations using detailed hydrogen chemistry are done on one-, two-, and three-dimensional flames. The analysis spans flat and stretched, steady and unsteady, and laminar and turbulent flames. Quantitative and qualitative results using the thermal diffusion model compare very well with the more complex multicomponent diffusion model. Comparisons are made using flame speeds, surface areas, species profiles, and chemical source terms. Once validated, this model is applied to three-dimensional laminar and turbulent flames. For these cases, thermal diffusion causes an increase in the propagation speed of the flames as well as increased product chemical source terms in regions of high positive curvature. The results illustrate the necessity for including thermal diffusion, and the accuracy and computational efficiency of the mixture-averaged thermal diffusion model.
Probabilistic estimation of depth-resolved profiles of soil thermal diffusivity from temperature time series
Abstract. Improving the quantification of soil thermal and physical properties is key to achieving a better understanding and prediction of soil hydro-biogeochemical processes and their responses to changes in atmospheric forcing. Obtaining such information at numerous locations and/or over time with conventional soil sampling is challenging. The increasing availability of low-cost, vertically resolved temperature sensor arrays offers promise for improving the estimation of soil thermal properties from temperature time series, and the possible indirect estimation of physical properties. Still, the reliability and limitations of such an approach need to be assessed. In the present study, we develop a parameter estimation approach based on a combination of thermal modeling, sliding time windows, Bayesian inference, and Markov chain Monte Carlo simulation to estimate thermal diffusivity and its uncertainty over time, at numerous locations and at an unprecedented vertical spatial resolution (i.e., down to 5 to 10 cm vertical resolution) from soil temperature time series. We provide the necessary framework to assess under which environmental conditions (soil temperature gradient, fluctuations, and trend), temperature sensor characteristics (bias and level of noise), and deployment geometries (sensor number and position) soil thermal diffusivity can be reliably inferred. We validate the method with synthetic experiments and field studies. The synthetic experiments show that in the presence of median diurnal fluctuations ≥ 1.5 ∘C at 5 cm below the ground surface, temperature gradients > 2 ∘C m−1, and a sliding time window of at least 4 d the proposed method provides reliable depth-resolved thermal diffusivity estimates with percentage errors ≤ 10 % and posterior relative standard deviations ≤ 5 % up to 1 m depth. Reliable thermal diffusivity under such environmental conditions also requires temperature sensors to be spaced precisely (with accuracy to a few millimeters), with a level of noise ≤ 0.02 ∘C, and with a bias defined by a standard deviation ≤ 0.01 ∘C. Finally, the application of the developed approach to field data indicates significant repeatability in results and similarity with independent measurements, as well as promise in using a sliding time window to estimate temporal changes in soil thermal diffusivity, as needed to potentially capture changes in bulk density or water content.
Validation study of GENE on ASDEX Upgrade using perturbative thermal diffusivity measured with partial sawtooth heat pulses
Perturbative thermal diffusivity is measured with partial sawtooth-generated heat pulses on ASDEX Upgrade for the first time, and these measurements are used to validate the first nonlinear ion-scale gyrokinetic simulation that agrees with experimentally measured perturbative diffusivity. Recent work on Alcator C-Mod and DIII-D has shown that ion-scale gyrokinetics cannot adequately describe certain plasma conditions, and that in these instances multi-scale simulations may resolve the observed discrepancies. This work presents the first measurements of electron perturbative thermal diffusivity with partial sawteeth on ASDEX Upgrade (measuring values between 2 and 9 m 2 s -1 ), and compares these measurements to those made with more established modulated electron cyclotron heating measurements, finding good agreement within experimental uncertainty. Perturbative diffusivity is found to scale inversely with collisionality across ASDEX Upgrade and Alcator C-Mod plasmas. Finally, perturbative diffusivity is used as a validation constraint in a study with the gyrokinetic code GENE, showing the first instance where an ion-scale gyrokinetic simulation can simultaneously match the experimental ion and electron heat fluxes and the perturbative thermal diffusivity. Here these results indicate that multi-scale effects may only be important in some plasmas, and the collisionality and ratio of high to low wavenumber linear growth rates may distinguish these cases.
Fast Measurements Of Thermal Diffusivities Of Ceramics
Temperature rises of samples compared with reference sample. Apparatus quickly measures thermal diffusivities of ceramics at high temperatures. Produces data on relative thermal diffusivities of as many as six ceramic specimens per hour. Thermal-diffusivity tester makes it easy to determine thermal diffusivities of ceramics. Pronounced effects of processing parameters on thermal properties of ceramics evaluated quickly.
Maskless direct laser writing with visible light: Breaking through the optical resolving limit with cooperative manipulations of nonlinear reverse saturation absorption and thermal diffusion
In this work, the resolving limit of maskless direct laser writing is overcome by cooperative manipulation from nonlinear reverse saturation absorption and thermal diffusion, where the nonlinear reverse saturation absorption can induce the formation of below diffraction-limited energy absorption spot, and the thermal diffusion manipulation can make the heat quantity at the central region of energy absorption spot propagate along the thin film thickness direction. The temperature at the central region of energy absorption spot transiently reaches up to melting point and realizes nanolithography. The sample “glass substrate/AgInSbTe” is prepared, where AgInSbTe is taken as nonlinear reverse saturation absorption thin film. The below diffraction-limited energy absorption spot is simulated theoretically and verified experimentally by near-field spot scanning method. The “glass substrate/Al/AgInSbTe” sample is prepared, where the Al is used as thermal conductive layer to manipulate the thermal diffusion channel because the thermal diffusivity coefficient of Al is much larger than that of AgInSbTe. The direct laser writing is conducted by a setup with a laser wavelength of 650 nm and a converging lens of NA=0.85, the lithographic marks with a size of about 100 nm are obtained, and the size is only about 1/10 the incident focused spot. The experimental results indicate that the cooperative manipulation from nonlinear reverse saturation absorption and thermal diffusion is a good method to realize nanolithography in maskless direct laser writing with visible light.
Thermal diffusion in the topside ionosphere.
Thermal diffusion in topside ionosphere, stressing effect on ion density profiles
Reference Materials for Laser and Xenon Flash Thermal Diffusivity Systems
This report presents the status of current standard reference materials for thermal diffusivity testing. In most thermal properties testing systems, it is common to use standard reference materials to show the reproducibility of the tests and certify the instrument is producing results within expected uncertainty range. The definition of reference materials or standards vary depending on the quality control protocols of the project. For thermal diffusivity, although there were standards available by the National Bureau of Standards (NBS) 40 years ago, there has been no recent NIST standard reference material (SRM). There are only a few sources that produce and provide traceable reference standards for thermal diffusivity. The certificate typically expires in 5 years and only applies to the specific lot of materials. Other reference materials are provided by the testing systems manufacturers. They are mostly well-known reference materials or materials used by the equipment manufacturers with historic data. However, most these reference materials no longer carry valid certificates. Various reference materials will be discussed along with the industry practice when only secondary standards are available.
Thermal diffusivity of diamond films
A laser pulse technique to measure the thermal diffusivity of diamond films deposited on a silicon substrate is developed. The effective thermal diffusivity of diamond film on silicon was measured by observing the phase and amplitude of the cyclic thermal waves generated by the laser pulses. An analytical model is developed to calculate the effective in-plane (face-parallel) diffusivity of a two layer system. The model is used to reduce the effective thermal diffusivity of the diamond/silicon sample to a value for the thermal diffusivity and conductivity of the diamond film. Phase and amplitude measurements give similar results. The thermal conductivity of the films is found to be better than that of type 1a natural diamond.
A simplified model for thermal-wave cavity self-consistent measurement of thermal diffusivity
A simplified theoretical model was developed for the thermal-wave cavity (TWC) technique in this study. This model takes thermal radiation into account and can be employed for absolute measurements of the thermal diffusivity of gas and liquid samples without any knowledge of geometrical and thermal parameters of the components of the TWC. Using this model and cavity-length scans, thermal diffusivities of air and distilled water were accurately and precisely measured as (2.191 ± 0.004) × 10{sup −5} and (1.427 ± 0.009) × 10{sup −7} m{sup 2} s{sup −1}, respectively, in very good agreement with accepted literature values.
A high temperature thermal diffusivity determination procedure for solids and liquids
A new method for measuring the thermal diffusivity of materials at high temperatures is presented. The method is applicable to solids on Earth, and to liquids in the reduced gravity environment of space. It is especially suited to levitated liquid metals at elevated temperatures where thermal diffusivity data is not available. The method is applied in two parts, such that lumped analysis is valid in the first part, and Fourier's law of conduction is valid in the second. In both parts, the spherical specimen is assumed to have been heated to a desired temperature and cooled. An inverse conduction problem is then formulated and solved using Laplace transformation techniques. Using this solution, sample sizes, and experimentally obtained surface temperature history, the thermal diffusivity is determined by minimizing a function that satisifies the heat balance at the surface. Minimization is performed using a modified quasilinearization algorithm. Accuracy is very sensitive to error in the temperature data and increases with better curve fits to the temperature data. An error analysis is also performed, and the effect of errors in the various parameters on the evaluated thermal diffusivity is determined. An experimental study for solids on Earth is suggested, before development for implementation in space.