Search NASA⌕ Search

SEARCH · Search NASA

Results for “three component”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Pacific Marine Energy Center Laser Doppler Velocimetry Commissioning

First commissioning data for the new laser doppler velocimetry (LDV) system that will be used at the Tyler Flume at the University of Washington. The LDV system can measure three components of velocity at a point. For this dataset the three components were operated in non-coincident mode and data were acquired at the center of the empty facility. Comparisons of freestream turbulence were made with a Vectrino slightly upstream of the LDV measurement location.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

Rapid subsurface analysis of frequency-domain thermoreflectance images with K-means clustering

K-means clustering analysis is applied to frequency-domain thermoreflectance (FDTR) hyperspectral image data to rapidly screen the spatial distribution of thermophysical properties at material interfaces. Performing FDTR while raster scanning a sample consisting of 8.6 μm of doped-silicon (Si) bonded to a doped-Si substrate identifies spatial variation in the subsurface bond quality. Routine thermal analysis at select pixels quantifies this variation in bond quality and allows assignment of bonded, partially bonded, and unbonded regions. Performing this same routine thermal analysis across the entire map, however, becomes too computationally demanding for rapid screening of bond quality. To address this, K-means clustering was used to reduce the dimensionality of the dataset from more than 20 000 pixel spectra to just K = 3 component spectra. The three component spectra were then used to express every pixel in the image through a least-squares minimized linear combination providing continuous interpolation between the components across spatially varying features, e.g., bonded to unbonded transition regions. Fitting the component spectra to the thermal model, thermal properties for each K cluster are extracted and then distributed according to the weighting established by the regressed linear combination. Thermophysical property maps are then constructed and capture significant variation in bond quality over 25 μm length scales. The use of K-means clustering to achieve these thermal property maps results in a 74-fold speed improvement over explicit fitting of every pixel.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Mechanistic Understanding and Rational Design of Quantum Dot/Mediator Interfaces for Efficient Photon Upconversion

The semiconductor-nanocrystal-sensitized, three-component upconversion system has made great strides over the past 5 years. The three components (i.e., triplet photosensitizer, mediator, and emitter) each play critical roles in determining the input and output photon energy and overall quantum efficiency (QE). The nanocrystal photosensitizer converts the absorbed photon into singlet excitons and then triplet excitons via intersystem crossing. The mediator accepts the triplet exciton via either direct Dexter-type triplet energy transfer (TET) or sequential charge transfer (CT) while extending the exciton lifetime. Through a second triplet energy-transfer step from the mediator to the emitter, the latter is populated in its lowest excited triplet state. Triplet–triplet annihilation (TTA) between two triplet emitters generates the emitter in its bright singlet state, which then emits the upconverted photon. Quantum dots (QD) have a tunable band gap, large extinction coefficient, and small singlet–triplet energy losses compared to metal–ligand charge-transfer complexes. This high triplet exciton yield makes QDs good candidates for photosensitizers. In terms of driving triplet energy transfer, the triplet energy of the mediator should be slightly lower than the triplet exciton energy of the QD sensitizer for a downhill energy landscape with minimal energy loss. The same energy cascade is also required for the transfer from the mediator to the emitter. Lastly, the triplet energy of the emitter must be slightly larger than one-half of its singlet energy to ensure that TTA is exothermic. Optimization of the sensitizer, mediator, and emitter will lead to an increase in the anti-Stokes shift and the total quantum efficiency. Evaluating each individual step’s efficiency and kinetics is necessary for the understanding of the limiting factors in existing systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

In situ quantification of fracture slip induced by hydraulic injections in a deep borehole: A comparison of two different borehole techniques

In situ measurements of fracture deformation during fluid injection are rare, yet essential for understanding the mechanical response of fractured rock. In this study, we evaluate the reliability of two methods by comparing their slip vector estimates: high-resolution borehole acoustic televiewer images captured before and after injection tests, and displacement data from a three-component borehole deformation probe recorded during the injections. Acoustic televiewer images capture only final in-plane displacement, whereas three-component borehole deformation measurements provide full 3D, transient fracture movement. Four injection tests in a fractured granitic rock mass along an inclined borehole at the Bedretto Underground Laboratory (Switzerland), beneath more than 1100 m of overburden, were analyzed. The two methods yielded consistent kinematics and comparable slip magnitudes, typically in the range of 0.2 – 0.6 mm. Angular differences between estimated slip directions ranged from 0.2° to 28°. For two test intervals with pre-existing fractures optimally oriented for slip, the measured slip vectors agreed with forward-modeled slip vectors based on the regional in situ stress field, supporting the Wallace–Bott hypothesis. Measurable shear displacement was identified in two test intervals containing fractures oriented nearly perpendicular to the least principal stress, including a newly formed hydraulic fracture. This demonstrates that even fractures unfavorably oriented for slip can undergo shear due to local stress perturbations around an inclined borehole.

Acoustic televiewer↗
DOE OSTI2025

STILGAR Seismic Array Data

Two three-component dense seismic arrays were deployed above an active limestone mine in Pleasant Gap, Pennsylvania; one in the fall and one in the spring of 2023. Each campaign lasted approximately four weeks and included 80 to 100 seismic stations with stations spaced between 100 and 400 meters apart. Each campaign also included several small dense seismic arrays. Two types of seismic stations were deployed including FairfieldNodal ZLand 3C All-in-One seismometers and Geospace 3C GS-ONE geophone paired with GSX3 and GSX4 dataloggers. This dataset includes ~ 4 TB of three-component continuously recorded seismic data in the miniseed format data from both campaigns as well as a readme file for the data structure.

58 GEOSCIENCES↗
DOE OSTI2026

Data and Scripts Associated with "Modeling Ecohydrological Responses of Vegetation to Urban Microclimates Using the E3SM Land Model"

This dataset supports the study of vegetation ecohydrological responses to urban microclimates using the land component of the Energy Exascale Earth System Model (ELM) at four urban sites in Knoxville, Tennessee, USA. It includes the model inputs, simulation outputs, and associated scripts for running ELM simulations and analyzing the resulting data. The Model_Inputs folder includes static surface data, satellite-derived phenology (i.e., leaf area index), and atmospheric forcing data used to drive ELM simulations. Detailed descriptions of these datasets are provided in Section 2.3.2 of the associated manuscript. The Model_Outputs folder contains simulation results for the baseline, treatment, and ensemble experiments. Outputs from the baseline and treatment simulations are provided as raw ELM NetCDF files. Because the raw outputs from the 4,000-member ensemble are prohibitively large, the ensemble results are provided as summarized CSV files, which also serve as the source data for Figure 5 of the associated manuscript. The Scripts folder contains three components: E3SM, the core codebase of the Energy Exascale Earth System Model (E3SM); elm-olmt, the Offline Land Model Testbed (OLMT) used to perform the simulations; and knoxville_elm, which contains the analysis scripts used to process model outputs and generate the figures and results presented in the associated manuscript. Additional information is provided in Scripts_readme.txt within the Scripts directory.

Lu, Xiaoman [ORNL] (ORCID:0000000306698780)↗
DOE OSTI2022

Measurement of the polarisation of single top quarks and antiquarks produced in the $t$-channel at $ \sqrt{s} $ = 13 TeV and bounds on the $tWb$ dipole operator from the ATLAS experiment

A simultaneous measurement of the three components of the top-quark and top-antiquark polarisation vectors in t-channel single-top-quark production is presented. This analysis is based on data from proton–proton collisions at a centre-of-mass energy of 13 TeV corresponding to an integrated luminosity of 139 fb –1 , collected with the ATLAS detector at the LHC. Selected events contain exactly one isolated electron or muon, large missing transverse momentum and exactly two jets, one being b-tagged. Stringent selection requirements are applied to discriminate t-channel single-top-quark events from the background contributions. The top-quark and top-antiquark polarisation vectors are measured from the distributions of the direction cosines of the charged-lepton momentum in the top-quark rest frame. The three components of the polarisation vector for the selected top-quark event sample are P x' = 0.01 ± 0.18, P y' = –0.029 ± 0.027, P z' = 0.91 ± 0.10 and for the top-antiquark event sample they are P x' = –0.02 ± 0.20, P y' = –0.007 ± 0.051, P z' = 0.79 ± 0.16. Normalised differential cross-sections corrected to a fiducial region at the stable-particle level are presented as a function of the charged-lepton angles for top-quark and top-antiquark events inclusively and separately. These measurements are in agreement with Standard Model predictions. The angular differential cross-sections are used to derive bounds on the complex Wilson coefficient of the dimension-six O tW operator in the framework of an effective field theory. The obtained bounds are C tW ϵ [–0.9, 1.4] and C itW ϵ [–0.8, 0.2], both at 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Parametric Study of the Influence of Support Type, Presence of Platinum on Support, and Ionomer Content on the Microstructure of Polymer Electrolyte Fuel Cell Catalyst Layers

We report Ultra-small angle X-ray scattering (USAXS) was employed to investigate the effects of carbon support type, the presence of platinum on carbon, and ionomer loading on the microstructure of polymer electrolyte fuel cell (PEFC) catalyst layers (CLs). Particle size distributions (PSDs), obtained from fitting the measured scattering data were used to interpret the size of carbon aggregates (40–300 nm) and agglomerates (>400 nm) from two-component carbon/ionomer and three-component platinum/carbon/ionomer CLs. Two types of carbon supports were investigated: high surface area carbon (HSC) and Vulcan XC-72. CLs with a range of perfluorosulfonic acid (PFSA) ionomer to carbon (I/C) ratios (0.2–1.2) and also with perfluoroimide acid (PFIA) ionomer were studied to evaluate the effect of ionomer on CL microstructure. The carbon type, the presence of platinum, and ionomer loading were all found to significantly impact carbon agglomeration. The extent of Pt/C agglomeration in the CL was found to increase with increasing ionomer and platinum concentration and to decrease with increasing carbon surface area. Platinum electrochemically-active surface area (ECSA) and local oxygen transport resistance (R nF ) were correlated to the CL microstructure to yield relationships affecting electrode performance.

25 ENERGY STORAGE↗
DOE OSTI2024

XRISM Spectroscopy of the Fe Kα Emission Line in the Seyfert Active Galactic Nucleus NGC 4151 Reveals the Disk, Broad-line Region, and Torus

Abstract We present an analysis of the first two XRISM/Resolve spectra of the well-known Seyfert-1.5 active galactic nucleus (AGN) in NGC 4151, obtained in 2023 December. Our work focuses on the nature of the narrow Fe K α emission line at 6.4 keV, the strongest and most common X-ray line observed in AGN. The total line is found to consist of three components. Even the narrowest component of the line is resolved with evident Fe K α ,1 (6.404 keV) and K α ,2 (6.391 keV) contributions in a 2:1 flux ratio, fully consistent with neutral gas with negligible bulk velocity. Subject to the limitations of our models, the narrowest and intermediate-width components are consistent with emission from optically thin gas, suggesting that they arise in a disk atmosphere and/or wind. Modeling the three line components in terms of Keplerian broadening, they are readily associated with (1) the inner wall of the “torus,” (2) the innermost optical “broad-line region” (or “X-ray BLR”), and (3) a region with a radius of r ≃ 100 GM / c 2 that may signal a warp in the accretion disk. Viable alternative explanations of the broadest component include a fast-wind component and/or scattering; however, we find evidence of variability in the narrow Fe K α line complex on timescales consistent with small radii. The best-fit models are statistically superior to simple Voigt functions, but when fit with Voigt profiles the time-averaged lines are consistent with a projected velocity broadening of FWHM = 1600 − 200 + 400 km s − 1 . Overall, the resolution and sensitivity of XRISM show that the narrow Fe K line in AGN is an effective probe of all key parts of the accretion flow, as it is currently understood. We discuss the implications of these findings for our understanding of AGN accretion, future studies with XRISM, and X-ray-based black hole mass measurements.

Audard, Marc (ORCID:000000034721034X)↗
DOE OSTI2021

NRAP-Open-IAM: FutureGen2 Component Models

This report describes the development and testing of three component models for NRAP-Open-IAM, the National Risk Assessment Partnership’s open-source integrated assessment model. The FutureGen2 Lookup Table Reservoir component model is based on interpolation of data from a set of lookup tables. The lookup tables contain pressures and saturations predicted by multiphase flow simulations performed with a reservoir simulator. The FutureGen2 Above Zone Monitoring Interval (AZMI) component is a surrogate model that can be used to estimate the impact that carbon dioxide (CO 2 ) and brine leaks from the CO 2 storage reservoir at the FutureGen 2.0 site might have had on overlying aquifers or monitoring units were a leak to occur. The model estimates the size of “impact plumes” according to five metrics: pH, Total Dissolved Solids (TDS), pressure, dissolved CO 2 and temperature. The FutureGen2 Aquifer component is similar, but is limited to four metrics: pH, Total Dissolved Solids (TDS), pressure, and dissolved CO 2 . The input parameters for each model are the same, but the Aquifer component is applicable to depths between 100 m and 700 m and the AZMI component is applicable from depths between 700 m and 1050 m.

42 ENGINEERING↗
DOE OSTI2020

Accuracy of volumetric flow rate inflow/outflow measurement by integrating PIV velocity fields

In this paper, the usefulness of planar Particle Image Velocimetry (PIV) measurements to determine the volumetric flow rate from a rectangular or round jet exit is assessed. Both two-component PIV (2C–PIV) and through-plane three-component (3C) stereo PIV (SPIV) data sets were acquired at the exit of a turbulent, rectangular nozzle and a round nozzle with Reynolds numbers between 10 000 and 100 000. The PIV data sets were processed using a variety of algorithms. The time-averaged results were then spatially integrated across the jet exits and compared to a calibrated flow meter. Recommendations for each method are developed and discussed with potential drawbacks. The accuracy of the measurement was found to be a weak function of the Reynolds number of the flow. Furthermore, two-component PIV was found to underestimate the volumetric flow rate by 1%–4% depending on the integration scheme and SPIV underestimated volumetric flow rate by 2%.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Dotted-line FLEET for two-component velocimetry

Femtosecond laser electronic excitation tagging (FLEET) is a powerful unseeded velocimetry technique typically used to measure one component of velocity along a line, or two or three components from a dot. In this Letter, we demonstrate a dotted-line FLEET technique which combines the dense profile capability of a line with the ability to perform two-component velocimetry with a single camera on a dot. Our set-up uses a single beam path to create multiple simultaneous spots, more than previously achieved in other FLEET spot configurations. We perform dotted-line FLEET measurements downstream of a highly turbulent, supersonic nitrogen free jet. Dotted-line FLEET is created by focusing light transmitted by a periodic mask with rectangular slits of 1.6 × 40 mm 2 and an edge-to-edge spacing of 0.5 mm, then focusing the imaged light at the measurement region. Up to seven symmetric dots spaced approximately 0.9 mm apart, with mean full-width at half maximum diameters between 150 and 350 µm, are simultaneously imaged. Both streamwise and radial velocities are computed and presented in this Letter.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Viscosity Analysis of Battery Electrode Slurry

We report the effects of component ratios and mixing time on electrode slurry viscosity. Three component quantities were varied: active material (graphite), conductive material (carbon black), and polymer binder (carboxymethyl cellulose, CMC). The slurries demonstrated shear-thinning behavior, and suspension properties stabilized after a relatively short mixing duration. However, micrographs of the slurries suggested their internal structures did not stabilize after the same mixing time. Increasing the content of polymer binder CMC caused the greatest viscosity increase compared to that of carbon black and graphite.

25 ENERGY STORAGE↗
DOE OSTI2021

AT2017gfo: Bayesian inference and model selection of multicomponent kilonovae and constraints on the neutron star equation of state

The joint detection of the gravitational wave GW170817, of the short γ-ray burst GRB170817A and of the kilonova AT2017gfo, generated by the the binary neutron star (NS) merger observed on 2017 August 17, is a milestone in multimessenger astronomy and provides new constraints on the NS equation of state. We perform Bayesian inference and model selection on AT2017gfo using semi-analytical, multicomponents models that also account for non-spherical ejecta. Observational data favour anisotropic geometries to spherically symmetric profiles, with a log-Bayes’ factor of ~104, and favour multicomponent models against single-component ones. The best-fitting model is an anisotropic three-component composed of dynamical ejecta plus neutrino and viscous winds. Using the dynamical ejecta parameters inferred from the best-fitting model and numerical–relativity relations connecting the ejecta properties to the binary properties, we constrain the binary mass ratio to q < 1.54 and the reduced tidal parameter to $120\lt \tilde{\Lambda }\lt 1110$. Finally, we combine the predictions from AT2017gfo with those from GW170817, constraining the radius of a NS of 1.4 M ⊙ to 12.2 ± 0.5 km (1σ level). This prediction could be further strengthened by improving kilonova models with numerical-relativity information.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Data-driven Techniques for $v^{e}$ Signal and Background Predictions in NOνA

NOν \nu A is a long baseline neutrino oscillation experiment, using two functionally identical detectors to measure νe \nu_e appearance and νμ \nu_\mu disappearance at the Far Detector (FD) with the NuMI Beam at Fermilab. The Near Detector (ND) measures the beam before oscillations, which will allow us to make a measurement of the signal flux before it has oscillated and the background components which can mimic νe \nu_e at our FD. We use the ND in three different ways to predict the amount of signal and background expected at the FD to partially cancel systematic uncertainties. The background prediction has three components: Charged Current (CC) νμ \nu_\mu , νe \nu_e and Neutral Current (NC) events. We need to determine the fraction of the selected ND sample in each of these components because some oscillate significantly (CC νμ \nu_\mu ) and some do not oscillate at all (NC). This poster will present details of these three data-driven techniques for predicting the FD spectrum.

Yu, Shiqi [Argonne; IIT, Chicago]↗
DOE OSTI2021

(2, 2) Scattering and the celestial torus

Analytic continuation from Minkowski space to (2, 2) split signature spacetime has proven to be a powerful tool for the study of scattering amplitudes. Here we show that, under this continuation, null infinity becomes the product of a null interval with a celestial torus (replacing the celestial sphere) and has only one connected component. Spacelike and timelike infinity are time-periodic quotients of AdS 3 . These three components of infinity combine to an S 3 represented as a toric fibration over the interval. Privileged scattering states of scalars organize into SL(2, $\mathbb{R}$) L ×SL(2, $\mathbb{R}$) R conformal primary wave functions and their descendants with real integral or half-integral conformal weights, giving the normally continuous scattering problem a discrete character.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗