Results for “transition metal intermetallics” — Page 2

DOE OSTI2020

A Novel Magnetic Material by Design: Observation of Yb 3+ with Spin-1/2 in Yb x Pt 5 P

The localized f-electrons enrich the magnetic properties in rare-earth-based intermetallics. Among those, compounds with heavier 4d and 5d transition metals are even more fascinating because anomalous electronic properties may be induced by the hybridization of 4f and itinerant conduction electrons primarily from the d orbitals. Here, we describe the observation of trivalent Yb 3+ with S = 1/2 at low temperatures in Yb x Pt 5 P, the first of a new family of materials. Yb x Pt 5 P (0.23 ≤ x ≤ 0.96) phases were synthesized and structurally characterized. They exhibit a large homogeneity width with the Yb ratio exclusively occupying the 1a site in the anti-CeCoIn 5 structure. Moreover, a sudden resistivity drop could be found in Yb x Pt 5 P below ~0.6 K, which requires further investigation. First-principles electronic structure calculations substantiate the antiferromagnetic ground state and indicate that two-dimensional nesting around the Fermi level may give rise to exotic physical properties, such as superconductivity. Yb x Pt 5 P appears to be a unique case among materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Use of Refractory-Volatile Element Deep Eutectic Regions to Grow Single Crystalline Intermetallic Compounds

Compounds containing both refractory and volatile elements present a unique challenge for crystal growth, given the conflicting realities of high melting temperatures and high vapor pressures. Nevertheless, the discovery of superconductivity in FeAs and FeSe based materials and a Weyl semimetal state in TaP are motivations to explore compounds containing such pairs. Here, we discuss use of the low-melting single phase liquid regions above deep M-X eutectics (M=transition metal, X=P, S) as the basis for high temperature solutions for growing intermetallic compounds containing volatile-refractory pairs. We show that Ni-P, Pd-P, Pt-P, and Pd-S compositions form single phase melts at moderate temperatures below 1000 °C and with minimal vapor pressure. We first present the simple case of growing Ni 2 P from Ni-P and next discuss the more complicated growth of RPd 3 S 4 (R=La, Ce, Nd, Eu) from a Pd-S melt. We show how frit-disc alumina crucible sets allow for contamination-free capture of decanted liquid and its reuse in subsequent experiments, demonstrating a fractionation of the CePd 3 S 4 growth to determine the optimal conditions for crystal growth. We conclude by using the single phase liquid regions above the Pt-P and Pd-P eutectics to grow single crystals of MPt 5 P (M=Mn, Fe) and MnPd 5 P. As these materials have primarily been studied in polycrystalline form, we give an overview of the magnetic and transport properties of our single crystals. The examples outlined here illustrate the utility of using the single phase liquid above deep metal-X eutectics for solution growth and materials discovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Shortcomings of meta-GGA functionals when describing magnetism

Several recent studies have shown that SCAN, a functional belonging to the meta-generalized gradient approximation (MGGA) family, leads to significantly overestimated magnetic moments in itinerant ferromagnetic metals. However, this behavior is not inherent to the MGGA level of approximation since TPSS, for instance, does not lead to such severe overestimations. In order to provide a broader view of the accuracy of MGGAfunctionals for magnetism, we extend the assessment to more functionals but also to antiferromagnetic solids. The results show that to describe magnetism there is overall no real advantage in using a MGGA functional compared to GGAs. For both types of approximation, an improvement in ferromagnetic metals is necessarily accompanied by a deterioration (underestimation) in antiferromagnetic insulators, and vice versa. Furthermore, we also provide some analysis in order to understand in more detail the relation between the mathematical form of the functionals and the results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Sm 2 Ru 3 Sn 5 : A Noncentrosymmetric Cubic Member of the Ln 2 M 3 X 5 Family

An optimized synthetic method is presented for Sm 2 Ru 3 Sn 5 and investigate its physical properties and electronic structure. Sm 2 Ru 3 Sn 5 is prepared by arc-melting stoichiometric ratios of the elements and is confirmed by single crystal and powder X-ray diffraction. An antiferromagnetic transition is observed at T N = 3.8 K. A modified Curie-Weiss fit to the data in the range 50–150 K yields a Curie-Weiss temperature: θ CW = −36.6 K and an effective magnetic moment: μ eff = 0.83 μ B , in agreement with a Sm 3+ oxidation state. Field-dependent magnetization up to H = 7 T at 2 K shows a maximum response of 0.06 μ B , which is significantly lower than the expected Sm 3+ saturation moment (0.71 μ B ). Resistivity measurements indicate metallic behavior, and analysis of the magnetic entropy from the heat capacity reveals a doublet ground state due to crystal electric field splitting. The electronic structure and density of states are calculated with density function theory and further supported by the local density approximation with dynamical mean-field theory. Finally, the experimental and computational results highlight localized Sm 3+ moments and suggest a possible interplay between Ruddelman–Kitel–Kasuya–Yosida and Kondo interactions, positioning Sm 2 Ru 3 Sn 5 as a promising material for studying topology and complex physical phenomena.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

Microstructural Assessment of a Multiple-Intermetallic-Strengthened Aluminum Alloy Produced from Gas-Atomized Powder by Hot Extrusion and Friction Extrusion

An aluminum (Al) matrix with various transition metal (TM) additions is an effective alloying approach for developing high-specific-strength materials for use at elevated temperatures. Conventional fabrication processes such as casting or fusion-related methods are not capable of producing Al–TM alloys in bulk form. Solid phase processing techniques, such as extrusion, have been shown to maintain the microstructure of Al–TM alloys. In this study, extrusions are fabricated from gas-atomized aluminum powders (≈100–400 µm) that contain 12.4 wt % TM additives and an Al-based matrix reinforced by various Al–Fe–Cr–Ti intermetallic compounds (IMCs). Two different extrusion techniques, conventional hot extrusion and friction extrusion, are compared using fabricating rods. During extrusion, the strengthening IMC phases were extensively refined as a result of severe plastic deformation. Furthermore, the quasicrystal approximant IMC phase (70.4 wt % Al, 20.4 wt % Fe, 8.7 wt % Cr, 0.6 wt % Ti) observed in the powder precursor is replaced by new IMC phases such as Al3.2Fe and Al45Cr7-type IMCs. The Al3Ti-type IMC phase is partially dissolved into the Al matrix during extrusion. The combination of linear and rotational shear in the friction extrusion process caused severe deformation in the powders, which allowed for a higher extrusion ratio, eliminated linear voids, and resulted in higher ductility while maintaining strength comparable to that resulting from hot extrusion. Results from equilibrium thermodynamic calculations show that the strengthening IMC phases are stable at elevated temperatures (up to ≈ 600 °C), thus enhancing the high-temperature strength of the extrudates.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Cooling-Rate-Driven Polymorphism and Vacancy Ordering in Ce 2 MnGe 6 Intergrowth Phases

Intergrowth phases in intermetallic systems provide a compelling framework for investigating structure–property relationships as a function of crystallographic subunit stacking. In this study, we examine the influence of Mn vacancy ordering on subunit stacking and reassign the structure of Ce 2 MnGe 6 to a monoclinic C2/m space group (a = 8.3486(17) Å, b = 8.6181(18) Å, c = 10.778(2) Å, β = 101.17(2)°). Additionally, we report a monoclinic polymorph of the Ln 2 MGe 6 family characterized as a tripled c-axis supercell derivative of monoclinic Ce 2 MnGe 6 , 3×c-Ce 2 MnGe 6 (a = 8.3482(16) Å, b = 8.6179(18) Å, c = 31.813(6) Å, β = 93.763(7)°). This polymorph emerges under rapid cooling conditions during the synthesis and offers insight into the structural relationship between the orthorhombic and monoclinic variants of the Ln 2 MGe 6 phases. Notably, the supercell form of Ce 2 MnGe 6 (3×c-Ce 2 MnGe 6 ) exhibits increased electrical resistivity and suggests enhanced Zintl-like behavior, potentially indicating greater thermodynamic stability relative to the parent monoclinic phase.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Structurally Frustrated Remeika Phases: Tolerance Factor and Non-Kramers’ Ion Effects

Quantum materials that are found on the verge of structural, magnetic, and electronic instabilities are deep reservoirs for exotic phenomena. Our criteria to study the reported Ln 5 Ru 6 Sn 18 (Ln = Gd, Tb) are guided by the tolerance factor for Remeika phases─a class of intermetallic compounds with the general formula A 3 M 4 X 13 (where A = rare-earth element, M = transition metal, and X = tetrel), which can be viewed as structural analogues of pseudoperovskites (4 × ABX 3 ), with one of the tetrel atoms occupying the A-site. We have grown single crystals, up to 0.5 cm on the largest facet, of Gd 5 Ru 6 Sn 18 (a = 13.8052(12) Å) and Tb 5 Ru 6 Sn 18 (a = 13.7825(9) Å), which we expect to be on the verge of a formation instability. Bulk magnetic, heat capacity, and electrical transport measurements reveal unusual behavior that originates from the trivalent Gd and Tb ions, with deviations from typical metallic behavior and magnetic ordering that is short-range or disrupted in some other way. Furthermore, to better understand these phenomena, single-crystal neutron diffraction is investigated, which reveals short-range correlations among the partially occupied Tb and Sn sublattices, with 3D-ΔPDF analysis supporting direction-dependent local order. Taken together, these measurements show the utility of using tolerance factors in identifying materials that are likely to exhibit complex phenomena and uncover environments where a formation instability may strongly impact emergent bulk magnetic and electronic phenomena.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Lattice vacancy migration barriers in Fe-Ni alloys, and an indication as to why Ni atoms diffuse slowly: A first-principles study

Lattice vacancy migration barriers in ferromagnetic Fe 𝑥 ⁢Ni 1−𝑥 alloys (0.4 ≤ 𝑥 ≤ 0.6) are accurately quantified within the framework of ab initio electronic structure calculations using the nudged elastic band (NEB) method. Both the atomically disordered (A1) fcc phase, as well as the atomically ordered, tetragonal L⁢1 0 phase—which is under consideration as a material for a rare-earth-free gap magnet for advanced engineering applications—are investigated. Across an ensemble of NEB calculations performed on supercell configurations spanning a range of compositions and containing disordered, partially ordered, and fully ordered structures, we find that Ni-vacancy interchanges encounter significantly higher energetic barriers than do Fe-vacancy interchanges. We contend that this aspect is a key factor in determining the differences in mobility between Fe and Ni atoms in this ferromagnetic alloy. Moreover, we are able to interpret these findings in terms of the ferromagnetic alloy's underlying spin-polarized electronic structure. Specifically, we report a coupling between the size of local lattice distortions and the magnitude of the local electronic spin polarization around vacancies. This causes Fe atoms to relax into lattice vacancies, while Ni atoms remain rigidly fixed to their original lattice positions. These results give atomic-scale insight into the longstanding experimental observation that Ni exhibits remarkably slow atomic diffusion in Fe-Ni alloys.

density functional theory↗

DOE OSTI2025

An energetic link between order and strength in metals: A nanocrystalline strength limit in high-entropy alloys and intermetallic compounds

The metallurgy and materials communities have long understood and exploited fundamental links between chemical and structural ordering in metallic solids to tailor their mechanical properties. We extend these ideas to include prediction of the nanocrystalline strength limit in high-entropy alloys and intermetallic compounds, where a breakdown occurs in the classical Hall-Petch strengthening behavior. The highest reported strength achievable through alloying has rapidly climbed and given rise to new classifications of materials with extraordinary properties, with a notable case being nanocrystalline metals. High-entropy alloys (chemically disordered, concentrated solid solutions) and intermetallic compounds are two boundary cases of how tailored order can be used to manipulate mechanical behavior. Here, we show that the complex electronic-structure mechanisms governing the peak strength of alloys and pure metals can be reduced to a few physically meaningful parameters based on their atomic arrangements and used – with no fitting parameters – to predict the maximum strength of these materials. This includes a generalized energy-based accounting for the degree of structural and chemical ordering that allows for rapid and reasonably accurate prediction of peak strength (validated in the nanocrystalline limit) as a function of temperature. Predictions of maximum strength based on the activation energy (with all materials properties derived from DFT calculations or experiments) for a stress-driven transition to an amorphous state is shown to accurately describe the breakdown in Hall-Petch behavior at the smallest crystallite sizes for pure metals, intermetallic compounds, high-entropy alloys, and metallic glasses. Further, this activation energy is also shown to be directly proportional to interstitial electronic charge density, which is a good predictor of ductility, stiffness (moduli), and phase stability in high-entropy alloys and solid metals generally. The proposed framework suggests the possibility of coupling ordering and intrinsic strength to mechanisms like dislocation nucleation, hydrogen embrittlement, and transport properties, such as through correlations between the activation energies for amorphization with stacking-fault and grain boundary energies. It additionally opens the prospect for greatly accelerated structural materials design and development to address materials challenges limiting more sustainable and efficient use of energy.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Interstitial Atoms and the Frustrated and Allowed Structural Transitions Principle: Tunability in the Electronic Structure of AuCu 3 ‐type Frameworks in Dy 4 T 1− x Ga 12 (T = Ag, Ir)

In this Article, we explore how the chemical pressure (CP) features of an intermetallic phase may provide opportunities to couple perturbations in electron count with the stabilization of the underlying geometrical structure. AuCu 3 ‐type LnGa 3 (Ln = lanthanide or group 3 metal) phases contain octahedral cavities of negative CP held open by overly compressed Ln–Ga interactions, leading to a series of transition metal‐stuffed derivatives. We present new additions to this family with the synthesis and crystal structures of Dy 4 T 1−x Ga 12 with (T, x) = (Ag, 0.29) and (Ir, 0.15), adopting Y 4 PdGa 12 ‐type superstructures of the AuCu 3 ‐type. density functional Ttheory (DFT)‐CP calculations, when adjusted to avoid dipolar CP features, affirm that T atom incorporation provides a mechanism for the relief of packing tensions, while electronic density of states distributions illustrate that the T atoms serve largely as electron or hole donors to the band structure, as needed for them to attain d 10 configurations. The maximum obtainable value for x may be limited by a mismatch between the Fermi energy and pseudogap, in line with the balance of factors envisioned by the frustrated and allowed structural transitions principle. Furthermore, trends in resistivity measurements on T = Ir, Pd, and Ag compounds are interpretable in terms of the varying degrees of disorder arising from x < 1.0.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Semi-adsorption-controlled growth window for half-Heusler FeVSb epitaxial films

The electronic, magnetic, thermoelectric, and topological properties of Heusler compounds (composition XYZ or X 2 YZ) are highly sensitive to stoichiometry and defects. Here we establish the existence and experimentally map the bounds of a semi-adsorption-controlled growth window for semiconducting half-Heusler FeVSb films, grown by molecular beam epitaxy (MBE). We show that due to the high volatility of Sb, the Sb stoichiometry is self-limiting for a finite range of growth temperatures and Sb fluxes, similar to the growth of III-V semiconductors such as GaSb and GaAs. Films grown within this window are nearly structurally indistinguishable by x-ray diffraction (XRD) and reflection high energy electron diffraction (RHEED). Here, the highest electron mobility and lowest background carrier density are obtained towards the Sb-rich bound of the window, suggesting that Sb vacancies may be a common defect. Similar semi-adsorption-controlled bounds are expected for other ternary intermetallics that contain a volatile species Z = {Sb, As, Bi}, e.g., CoTiSb, LuPtSb, GdPtBi, and NiMnSb. However, outstanding challenges remain in controlling the remaining Fe/V (X/Y) transition metal stoichiometry.

36 MATERIALS SCIENCE↗

DOE OSTI2020

High-temperature short-range order in Mn 3 RhSi

Conventional phase transitions are well understood in terms of the order parameter, based on the Landau–Ginzburg–Wilson theory. However, unconventional magnetic orders have been observed in clean systems such as MnSi. The unconventional magnetic orders of conduction electrons in the metallic phase has been observed for high-temperature superconductors and heavy fermion compounds. However, these unconventional magnetic orders have been limited to relatively low temperatures as quantum phase transitions. Here high-temperature magnetic short-range order is observed as one of the unconventional magnetic orders at temperatures up to 720 K in a noncentrosymmetric intermetallic antiferromagnet Mn 3 RhSi with a well-ordered lattice. The magnetic Mn ions form a hyperkagome network of corner-sharing triangles, where the spins are geometrically frustrated. The spin network is equivalent to that of a spin liquid and non-Fermi-liquid material, β-Mn. Our observation indicates that a metallic phase with magnetic short-range order exists at high temperatures.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Metal Independent Correlations for Site-specific Binding Energies of Relevant Catalytic Intermediates

Establishing energy correlations among different metals can accelerate the discovery of efficient and cost-effective catalysts for complex reactions. Using a recently introduced coordination-based model, we can predict site specific metal binding energies (∆EM) that can be used as a descriptor for chemical reactions. In this study, we have examined a range of metals including Ag, Au, Co, Cu, Ir, Ni, Os, Pd, Pt, Rh, and Ru and found linear correlations between predicted ∆EM and adsorption energies of CH and O (∆ECH and ∆EO) at various coordination environment for all the considered metals. Interestingly, all the metals correlate with one another under specific surface site coordination, indicating that different metals are interrelated in a particular coordination environment. Furthermore, we have tested and verified for PtPd and PtIr-based alloys that they follow a similar behavior. Moreover, we have expanded the metal space by taking some early transition metals along with few s-block metals and shown a cyclic behavior of the adsorbate binding energy (∆EA) versus ∆EM. Therefore, ∆ECH and ∆EO can be efficiently interpolated between metals, alloys and intermetallics based on information related to one metal only. This simplifies the process of screening new metal catalyst formulations and their reaction energies.

Density function theory↗

DOE OSTI2023

Ab Initio Simulations of Tritium Diffusion in Al 2 O and Intermetallic Al 12 (TM) 2.34 Aluminide Coating Phases

Density functional theory simulations have been carried out to investigate the diffusion of interstitial tritium in Al 12 (TM) 2.34 and Al 2 O bulk phases. In Al 12 (TM) 2.34 the transition metal (TM) sites are occupied on average by 58.93 at.% Fe, 18.52 at.% Cr, and 22.54 at.% Ni. While the insertion of interstitial tritium in Al 2 O lead to a strong disordering of the structure, we only investigated interstitial tritium in Al 12 (TM) 2.34 and its iron end-member (i.e., Al 12 Fe 2.34 ). Nine diffusion pathways have been investigated along the a-, b-, and c -axis of Al 12 (TM) 2.34 . The direction of fastest diffusion for interstitial tritium is found to be along the b-axis, with a calculated diffusion coefficient of ≈10 -10 m 2 .s -1 at 600 K, which is at least one order of magnitude faster than those previously calculated for interstitial tritium in other Al-rich phases such as Fe2Alx, Fe4Al13, and FeNiAl5 for which D T =10 -11 m 2 .s -1 , ≈10 -12 m 2 .s -1 , and D T ≈10 -13 m 2 .s -1 respectively. The comparison of the energy landscape between Al 12 (TM) 2.34 and Al 12 Fe 2.34 for the fastest diffusion pathways in each axis direction, found that some pathways are not sensitive to transition metal mixing, while other are more affected, leading to higher energy barrier in Al 12 Fe 2.34 in part due to a more energetically favorable formation of Fe—T bond compared to Ni—T. However, we found that both materials have similar diffusion coefficients as the fastest diffusion pathways occurs along pathways that are not very sensitive to transition metal mixing.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel

Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel Jana Howard1,3, Guang Yang3, Haiyan Zhao1*, Patrick Warren4, Tiankai Yao3, Steven Cavazos4 Elizabeth Sooby Wood4*, Ching-heng Shiau2 1 University of Idaho, Environmental Science, Idaho Falls, Idaho, USA 2 Boise State University, Microscopy and Characterization Suite, Idaho Falls, Idaho, USA 3 Idaho National Laboratory, Idaho Falls, Idaho, USA 4 University of Texas San Antonio, Department of Physics and Astronomy, San Antonio, Texas, USA *Corresponding author: haiyanz@uidaho.edu; elizabeth.soobywood@utsa.edu Tri-structural Isotropic (TRISO) particle fuel is the preferred choice for the newest and next-generation high-temperature nuclear reactors due to its robust construction [1]. The fuel design effectively contains fission products inside the particle at extremely high temperatures [2]. However, the effect of transition metal fission products on fuel performance and structural integrity remains largely unknown, creating uncertainties in predicting fuel performance and potential failure mechanisms [2]. For example, palladium (Pd) has a strong tendency to form intermetallic phases with uranium (U). These new phases tend to be hard and brittle which could lead to fracture of fuel kernel during irradiation [3,4]. Pd is not normally produced in high concentrations in normal fission reactions however, driving the production of Pd into the locality of a Uranium Oxycarbide (UCO) nuclear fuel provides an opportunity to closely observe the diffusion and chemical interactions. This study focuses on detailed transmission electron microscopy characterization of the intermetallic phases formed by the interaction between a UCO kernel and a Pd bar after annealing at 1100 °C for 100 hours. Figure 1 provides an overview of the UCO kernel in contact with the Pd bar. The UCO-Pd sample surface was examined using a Focused Ion Beam (FIB) Quanta 3D FEG FEI in VCD detector mode at 10kV, 83pA to reveal surface features. Several key surface features in the interaction region were observed including: (1) a small area with dendritic microstructure, (2) color contrast near the UCO kernel and Pd boundary, and (3) darker and lighter regions throughout the sample surface. To analyze diffusion behavior, FIB was used to prepare lamellae from five different areas of the UCO-Pd sample, as well as one for the as-received sample. These lamellae were examined using a Scanning Transmission Electron Microscope ThermoFisher Spectra 300 (STEM-Spectra). Energy Dispersive Spectroscopy results confirmed the diffusion between the UCO fuel and Pd bar. Figure 2 shows the identified phases of UC, UO2, and Pd dispersed throughout the interaction region. It was also found that the Pd concentration decreases as the radial distance from the UCO-Pd interface increases. The Pd concentration was 36.93% atomic fraction 11µm from the interaction region then decreased to 7.51% atomic fraction at 257 µm away from the interaction region. Figure 3 shows how concentrations of U and Pd vary across the interaction zone, highlighting the extent of diffusion. This study confirms that Pd interacts with surrounding material to form U-Pd phase and diffusion zones. These diffusion zones vary in composition depending on its radial distance from the point of contact with the Pd bar. These findings contribute to a deeper understanding of the fission product behavior in high temperature nuclear fuels, aiding in the prediction and mitigation of potential fuel degradation mechanisms. A B C Fig. 1. SEM micrographs of UCO fuel kernel in contact with solid Pd bar and the lift out locations. Figure 1A shows UCO fuel kernel in contact with solid Pd bar. Figure 1B shows a higher magnification image of the UCO fuel-Pd interaction zone. Figure 1C shows lift out sites for the lamellae. A B C Fig 2. EDS maps reveal the distribution of U, O, and Pd in location 3. Figure 2A shows the distribution of uranium. Figure 2B shows the distribution of oxygen. Figure 2C shows the distribution of palladium. A B C Fig 3. Palladium and uranium concentration across interaction zone in location 2. Figure 3A shows EDS map of lift out number 2. Figure 3B shows a zoomed in EDS map taken from the interaction zone. Figure 3C shows a line graph of uranium and palladium concentrations across the interaction zone. References: 1. B.E. Wells, N.R. Phillips, K.J. Geelhood. Pacific West Laboratory. (2021). TRISO Fuel: Properties and Failure Modes. https://www.nrc.gov/docs/ML2117/ML21175A152.pdf (Accessed January 16, 2025). 2. American Nuclear Society. TRISO Fuel Development Progresses in INL, ORNL. https://www.gen-4.org/gif/upload/docs/application/pdf/2014-03/nov13nn_fuel_reprint.pdf (Accessed January 16, 2025) 3. Clark R.A., M.A. Con

36 - MATERIALS SCIENCE↗

DOE OSTI2025

Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel

Chemical Interaction of Palladium in Uranium Oxycarbide Nuclear Fuel Kernel Jana Howard1,3, Guang Yang3, Haiyan Zhao1*, Patrick Warren4, Tiankai Yao3, Steven Cavazos4 Elizabeth Sooby Wood4*, Ching-heng Shiau2 1 University of Idaho, Environmental Science, Idaho Falls, Idaho, USA 2 Boise State University, Microscopy and Characterization Suite, Idaho Falls, Idaho, USA 3 Idaho National Laboratory, Idaho Falls, Idaho, USA 4 University of Texas San Antonio, Department of Physics and Astronomy, San Antonio, Texas, USA *Corresponding author: haiyanz@uidaho.edu; elizabeth.soobywood@utsa.edu Tri-structural Isotropic (TRISO) particle fuel is the preferred choice for the newest and next-generation high-temperature nuclear reactors due to its robust construction [1]. The fuel design effectively contains fission products inside the particle at extremely high temperatures [2]. However, the effect of transition metal fission products on fuel performance and structural integrity remains largely unknown, creating uncertainties in predicting fuel performance and potential failure mechanisms [2]. For example, palladium (Pd) has a strong tendency to form intermetallic phases with uranium (U). These new phases tend to be hard and brittle which could lead to fracture of fuel kernel during irradiation [3,4]. Pd is not normally produced in high concentrations in normal fission reactions however, driving the production of Pd into the locality of a Uranium Oxycarbide (UCO) nuclear fuel provides an opportunity to closely observe the diffusion and chemical interactions. This study focuses on detailed transmission electron microscopy characterization of the intermetallic phases formed by the interaction between a UCO kernel and a Pd bar after annealing at 1100 °C for 100 hours. Figure 1 provides an overview of the UCO kernel in contact with the Pd bar. The UCO-Pd sample surface was examined using a Focused Ion Beam (FIB) Quanta 3D FEG FEI in VCD detector mode at 10kV, 83pA to reveal surface features. Several key surface features in the interaction region were observed including: (1) a small area with dendritic microstructure, (2) color contrast near the UCO kernel and Pd boundary, and (3) darker and lighter regions throughout the sample surface. To analyze diffusion behavior, FIB was used to prepare lamellae from five different areas of the UCO-Pd sample, as well as one for the as-received sample. These lamellae were examined using a Scanning Transmission Electron Microscope ThermoFisher Spectra 300 (STEM-Spectra). Energy Dispersive Spectroscopy results confirmed the diffusion between the UCO fuel and Pd bar. Figure 2 shows the identified phases of UC, UO2, and Pd dispersed throughout the interaction region. It was also found that the Pd concentration decreases as the radial distance from the UCO-Pd interface increases. The Pd concentration was 36.93% atomic fraction 11µm from the interaction region then decreased to 7.51% atomic fraction at 257 µm away from the interaction region. Figure 3 shows how concentrations of U and Pd vary across the interaction zone, highlighting the extent of diffusion. This study confirms that Pd interacts with surrounding material to form U-Pd phase and diffusion zones. These diffusion zones vary in composition depending on its radial distance from the point of contact with the Pd bar. These findings contribute to a deeper understanding of the fission product behavior in high temperature nuclear fuels, aiding in the prediction and mitigation of potential fuel degradation mechanisms. A B C Fig. 1. SEM micrographs of UCO fuel kernel in contact with solid Pd bar and the lift out locations. Figure 1A shows UCO fuel kernel in contact with solid Pd bar. Figure 1B shows a higher magnification image of the UCO fuel-Pd interaction zone. Figure 1C shows lift out sites for the lamellae. A B C Fig 2. EDS maps reveal the distribution of U, O, and Pd in location 3. Figure 2A shows the distribution of uranium. Figure 2B shows the distribution of oxygen. Figure 2C shows the distribution of palladium. A B C Fig 3. Palladium and uranium concentration across interaction zone in location 2. Figure 3A shows EDS map of lift out number 2. Figure 3B shows a zoomed in EDS map taken from the interaction zone. Figure 3C shows a line graph of uranium and palladium concentrations across the interaction zone. References: 1. B.E. Wells, N.R. Phillips, K.J. Geelhood. Pacific West Laboratory. (2021). TRISO Fuel: Properties and Failure Modes. https://www.nrc.gov/docs/ML2117/ML21175A152.pdf (Accessed January 16, 2025). 2. American Nuclear Society. TRISO Fuel Development Progresses in INL, ORNL. https://www.gen-4.org/gif/upload/docs/application/pdf/2014-03/nov13nn_fuel_reprint.pdf (Accessed January 16, 2025) 3. Clark R.A., M.A. Con

36 - MATERIALS SCIENCE↗

DOE OSTI2023

Additive manufacturing as a processing route for steel-aluminum bimetallic structures

Here we present results on the fabrication of steel-aluminum bi-metallic structures using directed energy deposition additive manufacturing. The challenges associated with the fabrication of a sharp transition from steel to aluminum are uncovered using ex-situ characterization techniques and thermo-mechanical modeling of the deposition process. It was found that the fabrication of a sharp steel-aluminum transition is challenging with extensive cracking observed at the interface. The cracking was attributed to the combined effect of residual stress development due to thermal expansion coefficient mismatch and the presence of ordered intermetallics with low ductility at the interface. Using a coupled thermodynamic and thermo-mechanical modeling approach, potential pathways to enable the fabrication of steel-aluminum bi-metallic structures using additive manufacturing are proposed. The results presented here can lay the foundation for future work on the fabrication of bi-metallic steel-aluminum structures using directed energy deposition.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Wire directed energy deposition of steel-aluminum structures using cold metal transfer process

In this study, a sharp transition from 316L stainless steel to 4043 aluminum alloy was fabricated using wire directed energy deposition (DED) via the cold metal transfer (CMT) process. The CMT process with its inherently low heat input, led to a significant reduction in intermetallic thickness at the bi-metallic interface compared to blown powder DED technique reported in the literature resulting in superior properties when compared to those of dissimilar steel-aluminum welds. Thermo-kinetic modeling confirmed that the intermetallic formation is through a classical nucleation and growth mechanism, and the fraction and thickness can be controlled by adjusting CMT process parameters to kinetically arrest or minimize the intermetallic formation. These findings underscore the efficacy of CMT-based wire DED for fabrication of steel-aluminum bi-metallic structures.

36 MATERIALS SCIENCE↗