Search NASA⌕ Search

SEARCH · Search NASA

Results for “vector spaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Root-N Krylov-space correction vectors for spectral functions with the density matrix renormalization group

In this work, we propose a method to compute spectral functions of generic Hamiltonians using the density matrix renormalization group (DMRG) algorithm directly in the frequency domain, based on a modified Krylov-space decomposition to compute the correction vectors. Our approach entails the calculation of the root-N (N=2 is the standard square root) of the Hamiltonian propagator using Krylov-space decomposition and repeating this procedure N times to obtain the actual correction vector. We show that our method greatly alleviates the burden of keeping a large bond dimension at large target frequencies, a problem found with conventional correction-vector DMRG, whereas achieving better computational performance at large N. We apply our method to spin and charge spectral functions of t-J and Hubbard models in the challenging two-leg ladder geometry and provide evidence that the root-N approach reaches a much improved spectral resolution compared to the conventional correction vector.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

A resolution independent neural operator

The Deep operator network (DeepONet) is a powerful yet simple neural operator architecture that utilizes two deep neural networks to learn mappings between infinite-dimensional function spaces. This architecture is highly flexible, allowing the evaluation of the solution field at any location within the desired domain. However, it imposes a strict constraint on the input space, requiring all input functions to be discretized at the same locations; this limits its practical applications. Here, in this work, we introduce a general framework for operator learning from input–output data with arbitrary number and locations of sensors. This begins by introducing a resolution-independent DeepONet (RI-DeepONet), enabling it to handle input functions that are arbitrarily, but sufficiently finely, discretized. To this end, we propose two dictionary learning algorithms to adaptively learn a set of appropriate continuous basis functions, parameterized as implicit neural representations (INRs), from correlated signals defined on arbitrary point cloud data. These basis functions are then used to project arbitrary input function data as a point cloud onto an embedding space (i.e., a vector space of finite dimensions) with dimensionality equal to the dictionary size, which can be directly used by DeepONet without any architectural changes. In particular, we utilize sinusoidal representation networks (SIRENs) as trainable INR basis functions. The introduced dictionary learning algorithms are then used in a similar way to learn an appropriate dictionary of basis functions for the output function data, which defines a new neural operator architecture referred to as the R esolution I ndependent N eural O perator (RINO). In the RINO, the operator learning task simplifies to learning a mapping from the coefficients of input basis functions to the coefficients of output basis functions. We demonstrate the robustness and applicability of RINO in handling arbitrarily (but sufficiently richly) sampled input and output functions during both training and inference through several numerical examples.

Deep operator network (DeepONet)↗
NASA NTRS1972

Distribution of error in least-squares solution of an overdetermined system of linear simultaneous equations

Probability density functions were derived for errors in the evaluation of unknowns by the least squares method in system of nonhomogeneous linear equations. Coefficients of the unknowns were assumed correct and computational precision were also assumed. A vector space was used, with number of dimensions equal to the number of equations. An error vector was defined and assumed to have uniform distribution of orientation throughout the vector space. The density functions are shown to be insensitive to the biasing effects of the source of the system of equations.

Miller, C. D.↗
NASA NTRS1974

The saturation spectrum of parametric instabilities

Recent calculations on the nonlinear saturation spectrum of the parametric decay instability are described. The initial calculations did not use the correct expression for the spontaneous emission term and were aimed at obtaining the distribution of spectral energy in the unstable part of wave vector space. Results of those initial calculations are combined here with the correct expression for the spontaneous emission term to obtain the distribution of spectral energy in the stable part of wave vector space. These latter calculations are believed to be relevant to the interpretation of the so called plasma line spectra obtained in ionospheric heating experiments at Arecibo, Puerto Rico.

Fejer, J. A.↗
DOE OSTI2024

A double copy from twisted (co)homology at genus one

We study the twisted (co)homology of a family of genus-one integrals — the so called Riemann-Wirtinger integrals. These integrals are closely related to one-loop string amplitudes in chiral splitting where one leaves the loop-momentum, modulus and all but one puncture un-integrated. While not actual one-loop string integrals, they share many properties and are simple enough that the associated twisted (co)homologies have been completely characterized [1]. Using intersection numbers — an inner product on the vector space of allowed differential forms — we derive the Gauss-Manin connection for two bases of the twisted cohomology providing an independent check of [2]. We also use the intersection index — an inner product on the vector space of allowed contours — to derive a double-copy formula for the closed-string analogues of Riemann-Wirtinger integrals (one-dimensional integrals over the torus). Similar to the celebrated KLT formula between open- and closed-string tree-level amplitudes, these intersection indices form a genus-one KLT-like kernel defining bilinears in meromorphic Riemann-Wirtinger integrals that are equal to their complex counterparts.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1988

Automatic calibration of space based manipulators and mechanisms

Four tasks in manipulator kinematic calibration are summarized. Calibration of a seven degree of freedom manipulator was simulated. A calibration model is presented that can be applied on a closed-loop robot. It is an expansion of open-loop kinematic calibration algorithms subject to constraints. A closed-loop robot with a five-bar linkage transmission was tested. Results show that the algorithm converges within a few iterations. The concept of model differences is formalized. Differences are categorized as structural and numerical, with emphasis on the structural. The work demonstrates that geometric manipulators can be visualized as points in a vector space with the dimension of the space depending solely on the number and type of manipulator joint. Visualizing parameters in a kinematic model as the coordinates locating the manipulator in vector space enables a standard evaluation of the models. Key results include a derivation of the maximum number of parameters necessary for models, a formal discussion on the inclusion of extra parameters, and a method to predetermine a minimum model structure for a kinematic manipulator. A technique is presented that enables single point sensors to gather sufficient information to complete a calibration.

Everett, Louis J.↗
NASA NTRS2019

Powder Bed Fusion Additive Manufacturing of JBK-75

JBK-75 is an iron-nickel derivative alloy of A-286 that has been of interest to NASA’s propulsion community for use in fuel injectors and other components that are used in hot, corrosive environments. To enable the rapid production of these components in JBK-75, Marshall Space Flight Center has developed parameters for manufacturing fully dense JBK-75 components using powder bed fusion additive manufacturing (PBFAM). These parameters were developed in a two-step development. First, the depth of laser penetration in the powdered material was measured across a spectrum of laser powers to determine the optimal power necessary for generating the desired meltpool depth. The parameter set’s vector-to-vector spacing was then then tailored to guarantee the full densification of the desired area. The results of this development was a readily implementable parameter that produced 99.6% dense material when using a 147W power running at 600mm/s with a 85μm(32%) vector-to-vector spacing.

Jones, Z. C.↗
DOE OSTI2024

Simple and Robust Carrier-Based PWM Technique for Single-Stage Three-phase Rectifier Indirect Matrix Converter

Indirect matrix converters (IMC) can offer high efficiency, high power density, and bidirectional power flow capability with a single-stage three-to single-phase AC-AC power conversion integrating a conventional three-phase active rectifier with a primary side full-bridge inverter of a dual active bridge converter. However, the IMCs generally require space vector modulation techniques, leading to complex sectors and dwell times calculations. A practical implementation of the modulation methods with a commonly used digital signal processor becomes even more challenging when considering power factor correction, harmonics reduction, and deadtime between sector transitions. This paper proposes a simple and robust carrier-based pulse width modulation (PWM) technique determined through a voltage-source inverter (VSI) to current-source inverter (CSI) to IMC conversion. This translation enables the adoption of all conventional VSI control methods with active and reactive power control in the IMCs through simple carrier and reference waveform comparison. The VSI vectors are first one-on-one matched with CSI vectors and translated to IMC modulation signals without calculating sectors and dwell times. Nine different carrier waveforms are proposed, and the converter performance is analyzed. Grid current THD and efficiency are estimated for each modulation method. The symmetric A and B methods had the lowest THD of the grid current, 2.80%, and the efficiency remained at approximately 98.3%, making it the most suitable carrier-based method proposed in this paper. The space vector PWM (SVPWM) modulation method was implemented to the DSP and generated the expected twelve gate signals.

Benson, Mikayla↗
NASA NTRS1988

The SAMEX Vector Magnetograph: A Design Study for a Space-Based Solar Vector Magnetograph

This report presents the results of a pre-phase A study performed by the Marshall Space Flight Center (MSFC) for the Air Force Geophysics Laboratory (AFGL) to develop a design concept for a space-based solar vector magnetograph and hydrogen-alpha telescope. These are two of the core instruments for a proposed Air Force mission, the Solar Activities Measurement Experiments (SAMEX). This mission is designed to study the processes which give rise to activity in the solar atmosphere and to develop techniques for predicting solar activity and its effects on the terrestrial environment.

Hagyard, M. J.↗
DOE OSTI2023

Reliability Improvement by Fault-Tolerant Operation of NPC Inverter for Motor Driving

The high-reliability operation of three-level inverters is crucial to prevent equipment damage, process downtime, and economic losses. This article investigates a three-level neutral-point-clamped inverter under all possible combinations of open-circuit and short-circuit faults and proposes a new postfault operation method without adding extra hardware. This method provides comprehensive solution for operations after single and multiple-device failures, increasing the inverter reliability by 24%. This article classified postfault modulations and uncovered previously unknown fault scenarios that can be addressed using the proposed control method. A new postfault modulation based on space vector modulation with virtual vectors is proposed. The feasibility of the proposed control method is verified by simulation and an experiment for one fault scenario in a three-level neutral-point-clamped inverter with a 3.73 kW motor load. Furthermore, this article contributes to improving the reliability of three-level inverters.

42 ENGINEERING↗
DOE OSTI2025

Replacing non-biomedical concepts improves embedding of biomedical concepts

Embeddings are semantically meaningful representations of words in a vector space, commonly used to enhance downstream machine learning applications. Traditional biomedical embedding techniques often replace all synonymous words representing biological or medical concepts with a unique token, ensuring consistent representation and improving embedding quality. However, the potential impact of replacing non-biomedical concept synonyms has received less attention. Embedding approaches often employ concept replacement to replace concepts that span multiple words, such as non-small-cell lung carcinoma, with a single concept identifier (e.g., D002289). Also, all synonyms of each concept are merged into the same identifier. Here, we additionally leveraged WordNet to identify and replace sets of non-biomedical synonyms with their most common representatives. This combined approach aimed to reduce embedding noise from non-biomedical terms while preserving the integrity of biomedical concept representations. We applied this method to 1,055 biomedical concept sets representing molecular signatures or medical categories and assessed the mean pairwise distance of embeddings with and without non-biomedical synonym replacement. A smaller mean pairwise distance was interpreted as greater intra-cluster coherence and higher embedding quality. Embeddings were generated using the Word2Vec algorithm applied to a corpus of 10 million PubMed abstracts. Our results demonstrate that the addition of non-biomedical synonym replacement reduced the mean intra-cluster distance by an average of 8%, suggesting that this complementary approach enhances embedding quality. Future work will assess its applicability to other embedding techniques and downstream tasks. Python code implementing this method is provided under an open-source license.

algorithms↗
DOE OSTI2025

First Order Transport of a Cold Uniform Ellipsoid of Charge

A single particle has a 6-element phase space vector $s = (x, γv)$ where $γv =\frac{p}{m}$ s proportional to the relativistic momentum. The ellipsoid is represented by a 21-element vector $(s, C, V)$ where $s$ is the phase space location of the centroid. $C$ is the 3 × 3 covariance matrix defined by $C_{ij} = ⟨δx_iδx_j⟩$, where $δx$ is the distance of a particle from the centroid $x$. $C$ is symmetric so only counts as 6 elements of the overall vector. $V$ is a general 3 × 3 matrix that determines the velocity distribution in the bunch by $δ(γv) = Vδx$. In total this makes 6 + 6 + 9 = 21 elements.

43 PARTICLE ACCELERATORS↗
NASA NTRS2006

A New Look at Some Solar Wind Turbulence Puzzles

Some aspects of solar wind turbulence have defied explanation. While it seems likely that the evolution of Alfvenicity and power spectra are largely explained by the shearing of an initial population of solar-generated Alfvenic fluctuations, the evolution of the anisotropies of the turbulence does not fit into the model so far. A two-component model, consisting of slab waves and quasi-two-dimensional fluctuations, offers some ideas, but does not account for the turning of both wave-vector-space power anisotropies and minimum variance directions in the fluctuating vectors as the Parker spiral turns. We will show observations that indicate that the minimum variance evolution is likely not due to traditional turbulence mechanisms, and offer arguments that the idea of two-component turbulence is at best a local approximation that is of little help in explaining the evolution of the fluctuations. Finally, time-permitting, we will discuss some observations that suggest that the low Alfvenicity of many regions of the solar wind in the inner heliosphere is not due to turbulent evolution, but rather to the existence of convected structures, including mini-clouds and other twisted flux tubes, that were formed with low Alfvenicity. There is still a role for turbulence in the above picture, but it is highly modified from the traditional views.

Roberts, Aaron↗
NASA NTRS2002

Control of Initialized Fractional-Order Systems

Due to the importance of historical effects in fractional-order systems, this paper presents a general fractional-order control theory that includes the time-varying initialization response. Previous studies have not properly accounted for these historical effects. The initialization response, along with the forced response, for fractional-order systems is determined. Stability properties of fractional-order systems are presented in the complex Airplane, which is a transformation of the s-plane. Time responses are discussed with respect to pole positions in the complex Airplane and frequency response behavior is included. A fractional-order vector space representation, which is a generalization of the state space concept, is presented including the initialization response. Control methods for vector representations of initialized fractional-order systems are shown. Nyquist, root-locus, and other input-output control methods are adapted to the control of fractional-order systems. Finally, the fractional-order differintegral is generalized to continuous order-distributions that have the possibility of including a continuum of fractional orders in a system element.

Hartly, Tom T.↗
NASA NTRS2002

Control of Initialized Fractional-Order Systems

Due to the importance of historical effects in fractional-order systems, this paper presents a general fractional-order control theory that includes the time-varying initialization response. Previous studies have not properly accounted for these historical effects. The initialization response, along with the forced response, for fractional-order systems is determined. Stability properties of fractional-order systems are presented in the complex w-plane, which is a transformation of the s-plane. Time responses are discussed with respect to pole positions in the complex w-plane and frequency response behavior is included. A fractional-order vector space representation, which is a generalization of the state space concept, is presented including the initialization response. Control methods for vector representations of initialized fractional-order systems are shown. Nyquist, root-locus, and other input-output control methods are adapted to the control of fractional-order systems. Finally, the fractional-order differintegral is generalized to continuous order-distributions that have the possibility of including a continuum of fractional orders in a system element.

Hartley, Tom T.↗