Launch-vehicle dynamics
Structural dynamics problems in design of launch vehicles for lunar mission
LAUNCH VEHICLE↗
SEARCH · Search NASA
Results for “vehicle dynamics,”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Experimental Evaluation of the Scale Model Method to Simulate Lunar Vehicle Dynamics
As compared to driving on Earth, the presence of lower gravity and uneven terrain on planetary bodies makes high speed driving difficult. In order to maintain ground contact and control vehicles need to be designed with special attention to dynamic response. The challenge of maintaining control on the Moon was evident during high speed operations of the Lunar Roving Vehicle (LRV) on Apollo 16, as at one point all four tires were off the ground; this event has been referred to as the Lunar Grand Prix. Ultimately, computer simulation should be used to examine these phenomena during the vehicle design process; however, experimental techniques are required for the validation and elucidation of key issues. The objectives of this study were to evaluate the methodology for developing a scale model of a lunar vehicle using similitude relationships and to test how vehicle configuration, six or eight wheel pods, and local tire compliance, soft or stiff, affect the vehicles dynamic performance. A wheel pod consists of a drive and steering transmission and wheel. The Lunar Electric Rover (LER), a human driven vehicle with a pressurized cabin, was selected as an example for which a scale model was built. The scaled vehicle was driven over an obstacle and the dynamic response was observed and then scaled to represent the full-size vehicle in lunar gravity. Loss of ground contact, in terms of vehicle travel distance with tires off the ground, was examined. As expected, local tire compliance allowed ground contact to be maintained over a greater distance. However, switching from a six-tire configuration to an eight-tire configuration with reduced suspension stiffness had a negative effect on ground contact. It is hypothesized that this was due to the increased number or frequency of impacts. The development and testing of this scale model provided practical lessons for future low-gravity vehicle development.
Moon↗
Enabling Dynamic Vehicle Analyses With Improved Atmospheric Attenuation Models in Glenn Research Center Communication Analysis Suite
To aid in meeting the NASA objective of returning humans to the Moon, the Glenn Research Center’s Communication Analysis Suite was augmented with two distinct capabilities. The first capability added was the vehicle propagator. This allows the addition of dynamic aircraft and ground vehicles around any celestial body within the solar system during an analysis. This functionality interpolates the position and velocity of the vehicle relative to a celestial body at the time steps analyzed using the type of path and either a series of waypoints or a direction and duration of travel. The implications of this new capability include lunar rovers and/or drones, such as Dragonfly, where the vehicle propagator will analyze the communications architecture. The newly created vehicle propagator is now in use in communications studies for the 2024 lunar missions, simulating the movement of lunar rovers across the Moon’s southern pole. The second capability added was the augmentation of the atmospheric attenuation model. The previous model did not have a uniform low-elevation attenuation model due to the trigonometric approximation for path length and the exponential nature of low-elevation scintillation. User-defined weather parameters were also added to the updated atmospheric attenuation model. The previous model solely used tabular data based upon the season and location of the transmitting antenna. Multiple simulations of the same configuration now return different results based on the differing weather parameters. Cognitive communications analysis efforts can use this second capability to generate neural network training data based on differing weather conditions at utilized ground stations, a critical step in allowing neural networks to learn how weather parameters impact communications performance.
vehicle propagation↗
Modeling and Simulation of Vehicle Dynamics on the Surface of Phobos
In this paper we analyze the dynamics of a spacecraft in proximity of Phobos by developing the equations of motion of a test mass in the Phobos rotating frame using a model based on circularly-restricted three body problem, and by analyzing the dynamics of a ATHLETE hopper vehicle interacting with the soil under different soil-interaction conditions. The main conclusion of the numerical studies is that the system response is dominated by the stiffness and damping parameters of the leg springs, with the soil characteristics having a much smaller effect. The system simulations identify ranges of parameters for which the vehicle emerges stably (relying only on the passive viscoelastic damper at each leg) or unstably (needing active attitude control) from the hop. The implication is that further experimental and possibly computational modeling work, as well as site characterization (from precursor missions) will be necessary to obtain validated performance models.
soil-structure interaction↗
AS-205/CSM-101 launch vehicle dynamics analyses, part 2
Trajectory and dynamics analyses of Saturn 1B launch vehicle for Apollo-Saturn 205/CSM-101 mission
Colwell, C. L.↗
Overview of Orion Crew Module and Launch Abort Vehicle Dynamic Stability
With the retirement of the Space Shuttle, NASA is designing a new spacecraft, called Orion, to fly astronauts to low earth orbit and beyond. Characterization of the dynamic stability of the Orion spacecraft is important for the design of the spacecraft and trajectory construction. Dynamic stability affects the stability and control of the Orion Crew Module during re-entry, especially below Mach = 2.0 and including flight under the drogues. The Launch Abort Vehicle is affected by dynamic stability as well, especially during the re-orientation and heatshield forward segments of the flight. The dynamic stability was assessed using the forced oscillation technique, free-to-oscillate, ballistic range, and sub-scale free-flight tests. All of the test techniques demonstrated that in heatshield-forward flight the Crew Module and Launch Abort Vehicle are dynamically unstable in a significant portion of their flight trajectory. This paper will provide a brief overview of the Orion dynamic aero program and a high-level summary of the dynamic stability characteristics of the Orion spacecraft.
D. Bruce Owens↗
Power System Operational Impacts of Electric Vehicle Dynamic Wireless Charging
The electrification of the transportation sector poses an opportunity for reducing greenhouse gas (GHG) emissions from passenger vehicles. Electric vehicle (EV) charging through dynamic wireless power transfer (DWPT), known as roadway electrification, could shift EV demand profiles to better coincide with renewable electricity generation. However, this would be a very large new load and few studies evaluate the regional impacts of DWPT charging in a power transmission system. This paper defines methods that address dataset generation for passenger vehicle trips and models to evaluate regional impacts for this emerging technology. Household vehicle miles traveled (VMT) data form localized EV demand profiles through discrete-event simulation. This data serves as exogenous inputs for a Production Cost Model (PCM) of a synthetic transmission system based on the Electric Reliability Council of Texas's (ERCOT) network. EV charging methods are compared for both a 2018 baseline generation mixture and a high-renewable generation case incorporating 20 GW of installed solar photovoltaic (PV) capacity. The PCM employs unit commitment and economic dispatch (UC&ED) models to compare financial, environmental, and grid reliability impacts from EV charging across passenger EV adoption levels. In-transit charging could reduce grid operational costs by as much as 1.49%, with up to $13.7B saved in annual vehicle operational costs for consumers compared to gas-powered vehicles. Health impacts analysis from power plant and vehicle tailpipe emissions from this study show net health benefits increase by 40% for in-transit charging coupled with high renewable generation. Renewable resources provide an avenue for cost-effective in-transit charging with reduced emissions. The combination of dataset generation and open-source power system modeling establish a foundation for the holistic evaluation of regional DWPT impacts.
dynamic wireless power transfer↗
Study program of local angle-of-attack effects on vehicle dynamic response Final report
Effects of flexible body aerodynamics on launch vehicles
Bradley, D.↗
Modal identities for elastic bodies, with application to vehicle dynamics and control
It is a standard procedure to analyze a flexible vehicle in terms of its vibration frequencies and mode shapes. However, the entire mode shape is not needed per se, but two integrals of the mode shape, pi and hi, which correspond to the momentum and angular momentum in Mode i. Together with the natural frequencies omega-i, these modal parameters satisfy several important identities, 25 of which are derived in this paper. Expansions in terms of both constrained and unconstrained modes are considered. A simple illustrative example is included. The paper concludes with some remarks on the theoretical and practical utility of these results, and several potential extensions to the theory are suggested.
Hughes, P. C.↗
Review of delta wing space shuttle vehicle dynamics
The unsteady aerodynamics of the delta planform, high cross range, shuttle orbiter were investigated. It has been found that these vehicles are subject to five unsteady flow phenomena that could compromise the flight dynamics. They are: (1) leeside shock induced separation, (2) sudden leading edge stall, (3) vortex burst, (4) bow shock-flap shock interaction, (5) forebody vorticity. Trajectory shaping is seen as the most powerful means of avoiding the detrimental effects of the stall phenomena. However, stall must be fixed or controlled when traversing the stall region. The other phenomena may be controlled by carefully programmed control deflections and some configuration modification. Ways to alter the occurrence of the various flow conditions are explored.
Reding, J. P.↗
Review of delta wing space shuttle vehicle dynamics
The unsteady aerodynamics of the proposed delta planform, high cross range, shuttle orbiters, are investigated. It is found that these vehicles are subject to five unsteady-flow phenomena that could compromise the flight dynamics. The phenomena are as follows: (1) leeside shock-induced separation, (2) sudden leading-edge stall, (3) vortex burst, (4)bow shock-flap shock interaction, and (5) forebody vorticity. Trajectory shaping is seen as the most powerful means of avoiding deterimental effects of the stall phenomena; however, stall must be fixed or controlled when traversing the stall region. Other phenomana may be controlled by carefully programmed control deflections and some configuration modifications. Ways to alter the occurrence of the various flow conditions are explored.
Reding, J. P.↗
Next-Generation Energy Technologies for Connected and Automated On-Road Vehicles (NEXTCAR) - Predictive Data-Driven Vehicle Dynamics and Powertrain Control: from ECU to the Cloud (Final Scientific/Technical Report)
This project developed and demonstrated a predictive, data-driven vehicle control system designed to improve energy efficiency and driving performance. The team created intelligent self-driving car technology that optimizes fuel and electricity use by proactively planning vehicle actions. By combining Level 4 autonomous driving capabilities with vehicle-to-everything (V2X) connectivity, the system enables vehicles to adjust speed and change lanes in response to traffic signals, surrounding vehicles, and road conditions, reducing unnecessary stops and delays. In testing, the system improved vehicle fuel economy by more than 30% and reduced travel time by approximately 10%, compared to a conventional adaptive cruise control baseline. These results demonstrate the technical effectiveness of using predictive, V2X-enabled strategies, such as traffic light timing and surrounding traffic awareness, to inform real-time vehicle powertrain control and driving behavior. Additionally, a supporting cloud platform was developed to provide dispatch and route recommendations as well as to log vehicle data, demonstrating the economic feasibility of this approach at the fleet level. By optimizing dispatching and routing operations, this technology enables electric fleet operators to use their vehicles more efficiently and reduce reliance on diesel backups, lowering both operating costs and energy consumption. Overall, this project’s technology advances the future of clean, energy-efficient transportation, enabling vehicles and fleets to reduce energy waste, cut costs, and lower emissions through intelligent automation and connectivity.
33 ADVANCED PROPULSION SYSTEMS↗
Application of transmission concepts to flexible launch vehicle dynamics Final report, 4 Jan. 1966 - 4 Jan. 1967
Distributed parameter or wave transmission concept for analyzing bending vibration in flexible launch vehicle
LAUNCH VEHICLE↗
Real-Time and High-Fidelity Simulation Environment for Autonomous Ground Vehicle Dynamics
This paper reports on a collaborative project between U.S. Army TARDEC and Jet Propulsion Laboratory (JPL) to develop a unmanned ground vehicle (UGV) simulation model using the ROAMS vehicle modeling framework. Besides modeling the physical suspension of the vehicle, the sensing and navigation of the HMMWV vehicle are simulated. Using models of urban and off-road environments, the HMMWV simulation was tested in several ways, including navigation in an urban environment with obstacle avoidance and the performance of a lane change maneuver.
vehicle sensing↗
Real-Time and High-Fidelity Simulation Environment for Autonomous Ground Vehicle Dynamics
This paper reports on a collaborative project between U.S. Army TARDEC and Jet Propulsion Laboratory (JPL) to develop a unmanned ground vehicle (UGV) simulation model using the ROAMS vehicle modeling framework. Besides modeling the physical suspension of the vehicle, the sensing and navigation of the HMMWV vehicle are simulated. Using models of urban and off-road environments, the HMMWV simulation was tested in several ways, including navigation in an urban environment with obstacle avoidance and the performance of a lane change maneuver.
unmanned ground vehicle (UGV)↗
Dynamic Vehicle Assessment for Intelligent Contingency Management of Urban Air Mobility Vehicles
New algorithms will be required to ensure passenger and bystander safety during the expected era of autonomous urban air mobility (UAM) aircraft. This paper examines an approach for assessing the vehicle capability to fly itself and to complete a mission safely. The concepts combine elements of system identification, adaptive control, flight dynamics, envelope predictions, and handling qualities, as well as human pilot intuition. The approach is applied to a simulation of a generic distributed electric propulsion urban air mobility-type aircraft, which was developed under the NASA Transformational Tools and Technologies (TTT) project, Autonomous Systems / Intelligent Contingency Management subproject.
flight envelope↗
Dynamic Vehicle Assessment for Intelligent Contingency Management for Urban Air Mobility Vehicles
New algorithms will be required to ensure passenger and bystander safety during the expected era of autonomous urban air mobility (UAM) aircraft. This paper examines an approach for assessing the vehicle capability to fly itself and to complete a mission safely. The concepts combine elements of system identification, adaptive control, flight dynamics, envelope predictions, and handling qualities, as well as human pilot intuition. The approach is applied to a simulation of a generic distributed electric propulsion urban air mobility-type aircraft, which was developed under the NASA Transformational Tools and Technologies (TTT) project, Autonomous Systems / Intelligent Contingency Management subproject.
flight envelope prediction↗