Search NASA⌕ Search

SEARCH · Search NASA

Results for “vertical flux representation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

The effect of the vertical gradients of photosynthetic parameters on the CO 2 assimilation and transpiration of a Panamanian tropical forest

Terrestrial biosphere models (TBMs) include the representation of vertical gradients in leaf traits associated with modeling photosynthesis, respiration, and stomatal conductance. However, model assumptions associated with these gradients have not been tested in complex tropical forest canopies. Here we compared TBM representation of the vertical gradients of key leaf traits with measurements made in a tropical forest in Panama, and then quantified the impact of the observed gradients on simulated canopy scale CO 2 and water fluxes. Comparison between observed and TBM trait gradients showed divergence that impacted canopy scale simulations of water vapor and CO 2 exchange. Notably, the ratio between the dark respiration rate and the maximum carboxylation rate was lower near the ground than at the top-of-canopy, leaf-level water-use efficiency was markedly higher at the top-of-canopy, and the decrease in maximum carboxylation rate from the top-of-canopy to the ground was less than TBM assumptions. The representation of the gradients of leaf traits in TBMs is typically derived from measurements made within-individual plants, or, for some traits, assumed constant due to a lack of experimental data. Our work shows that these assumptions are not representative of the trait gradients observed in species-rich, complex tropical forests.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Aircraft-derived particle fluxes distinguish entrainment zone and decoupled layer nucleation in marine boundary layers

The vertical distribution of freshly nucleated aerosol particles in the marine boundary layer remains poorly constrained, limiting our ability to represent new particle formation in climate models. Here we characterize 3–10 nm particle events, termed small particle events (SPEs), by deriving their vertical turbulent fluxes from aircraft measurements during the Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA) campaign. To overcome stationarity limitations of traditional eddy covariance methods, we applied continuous wavelet transform analysis to data collected during June–July 2017 and January–February 2018 flights over the Azores. Our flux-based analysis revealed two distinct SPE scenarios with different vertical structures and spatial extents. The first featured nucleation in the entrainment zone, where free tropospheric air entrains into the boundary layer. The second showed nucleation in the decoupled layer, a stratified region between the well-mixed surface layer and cloud-topped upper boundary layer. In both cases, convergence of air masses from different layers diluted preexisting aerosol surface area to very low levels, creating conditions favorable for nucleation and generating strong downward particle fluxes. SPEs occurred in 15 % of flights, challenging prevailing theoretical expectations that new particle formation should rarely occur in marine boundary layers due to high condensation and coagulation sink capacity of sea spray aerosols. Aircraft-derived particle fluxes provide first observational constraints on the vertical location and source strength of likely nucleation regions in the remote marine boundary layer, improving aerosol source representations in climate models and reducing uncertainties in aerosol-cloud interactions.

Rasheeda Satheesh, Ajmal [North Carolina State Uni↗
DOE OSTI2023

Improving the representation of shallow cumulus convection with the simplified-higher-order-closure–mass-flux (SHOC+MF v1.0) approach

Abstract. Parameterized boundary layer turbulence and moist convection remain some of the largest sources of uncertainty in general circulation models. High-resolution climate modeling aims to reduce that uncertainty by explicitly attempting to resolve deep moist convective motions. An example of such a model is the Simple Cloud-Resolving E3SM Atmosphere Model (SCREAM) with a target global resolution of 3.25 km, allowing for a more accurate representation of complex mesoscale deep convective dynamics. Yet, small-scale planetary boundary layer turbulence and shallow convection still need to be parameterized, which in SCREAM is accomplished through the turbulent-kinetic-energy-based (TKE-based) simplified higher-order closure (SHOC) – a simplified version of the assumed-double-Gaussian-PDF (probability density function) higher-order-closure method. In this paper, we implement a stochastic-multiplume mass-flux (MF) parameterization of dry and shallow convection in SCREAM to go beyond the limitations of double-Gaussian-PDF closures and couple it to SHOC (SHOC+MF). The new parameterization implemented in a single-column model type version of SCREAM produces results for two shallow cumulus convection cases (marine and continental shallow convection) that agree well with the reference data from large-eddy simulations, thus improving the general representation of the thermodynamic quantities and their turbulent fluxes as well as cloud macrophysics in the model. Furthermore, SHOC+MF parameterization shows weak sensitivity to the vertical grid resolution and model time step.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Exploring Afro-Asian water fluxes in CMIP5 and CMIP6 models: Present-day evaluation and future projections

Accurate representation and projection of water fluxes are vital, particularly in monsoon regions where seasonal variability and changes significantly impact water resources, agriculture, hydroelectric power generation, and the economy. This study uses both CMIP5 and CMIP6 models to investigate the present-day representation of key water flux components (including precipitation, evaporation, water vapor, and moisture advection) over the Afro-Asian region during the summer monsoon (JJAS). We also examine future changes under two emission scenarios and assess the underlying physical mechanisms driving these changes while identifying sources of projection uncertainty. Our results show that both models reasonably capture the present-day characteristics of water flux components, although with noticeable biases. Across most regions, we find that CMIP6 models demonstrate slight improvements over CMIP5 in the representation of these components. In a warmer future, a robust intensification of JJAS precipitation (exceeding 0.25 mm/day) is projected across the Afro-Asian region. This increase is largely driven by the vertical thermodynamic term associated with increasing temperature. We find that model uncertainty is the primary source of uncertainty in water flux projections, accounting for over 50 % of the total variance.

Climate change↗
NASA NTRS2007

Evaluating the Capacity of Global CO2 Flux and Atmospheric Transport Models to Incorporate New Satellite Observations

As we enter the new era of satellite remote sensing for CO2 and other carbon cyclerelated quantities, advanced modeling and analysis capabilities are required to fully capitalize on the new observations. Model estimates of CO2 surface flux and atmospheric transport are required for initial constraints on inverse analyses, to connect atmospheric observations to the location of surface sources and sinks, and ultimately for future projections of carbon-climate interactions. For application to current, planned, and future remotely sensed CO2 data, it is desirable that these models are accurate and unbiased at time scales from less than daily to multi-annual and at spatial scales from several kilometers or finer to global. Here we focus on simulated CO2 fluxes from terrestrial vegetation and atmospheric transport mutually constrained by analyzed meteorological fields from the Goddard Modeling and Assimilation Office for the period 1998 through 2006. Use of assimilated meteorological data enables direct model comparison to observations across a wide range of scales of variability. The biospheric fluxes are produced by the CASA model at lxi degrees on a monthly mean basis, modulated hourly with analyzed temperature and sunlight. Both physiological and biomass burning fluxes are derived using satellite observations of vegetation, burned area (as in GFED-2), and analyzed meteorology. For the purposes of comparison to CO2 data, fossil fuel and ocean fluxes are also included in the transport simulations. In this presentation we evaluate the model's ability to simulate CO2 flux and mixing ratio variability in comparison to in situ observations at sites in Northern mid latitudes and the continental tropics. The influence of key process representations is inferred. We find that the model can resolve much of the hourly to synoptic variability in the observations, although there are limits imposed by vertical resolution of boundary layer processes. The seasonal cycle and its interannual variations generally respond adequately, but discrepancies in the tropics suggest the need for a refinement of the soil moisture dependence of the respiration flux in CASA. Examples and inferences for interpretation of satellite data will be discussed. In general, the fidelity of these simulations leads us to anticipate incorporation of real-time, highly resolved remote sensing and other observations into quantitative analyses that will reduce uncertainty in the terrestrial CO2 sink and revolutionize our understanding of the key processes controlling atmospheric CO2 and its evolution with time.

Kawa, S. R.↗
DOE OSTI2024

Functional-type modeling approach and data-driven parameterization of methane emissions in wetlands (Final Technical Science Report)

Our goals are to improve understanding and quantitative representation of the multiple processes that affect methane emissions at a high (patch level, vertically detailed) spatial resolution, and translate this understanding to improved modeling capability of coastal wetland fluxes using the E3SM Land Model (ELM v1) wetland CH4 biogeochemistry module. We propose an experimental approach to identify and parameterize uncertainties in ELM. Understanding of methane emissions can be improved along three conceptual axes: (i) horizontal (ecohydrological patch resolution), (ii) vertical (through the depth of the soil column), and (iii) process level (e.g., resolving microbial pathways, vegetation specific transport pathways). Along each of the three axes, we will characterize, quantify, and model, the key ecological, hydrological, and meteorological controls of methane (CH4) flux heterogeneity in four model coastal wetlands.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2007

Progress in Modeling Global Atmospheric CO2 Fluxes and Transport: Results from Simulations with Diurnal Fluxes

Progress in better determining CO2 sources and sinks will almost certainly rely on utilization of more extensive and intensive CO2 and related observations including those from satellite remote sensing. Use of advanced data requires improved modeling and analysis capability. Under NASA Carbon Cycle Science support we seek to develop and integrate improved formulations for 1) atmospheric transport, 2) terrestrial uptake and release, 3) biomass and 4) fossil fuel burning, and 5) observational data analysis including inverse calculations. The transport modeling is based on meteorological data assimilation analysis from the Goddard Modeling and Assimilation Office. Use of assimilated met data enables model comparison to CO2 and other observations across a wide range of scales of variability. In this presentation we focus on the short end of the temporal variability spectrum: hourly to synoptic to seasonal. Using CO2 fluxes at varying temporal resolution from the SIB 2 and CASA biosphere models, we examine the model's ability to simulate CO2 variability in comparison to observations at different times, locations, and altitudes. We find that the model can resolve much of the variability in the observations, although there are limits imposed by vertical resolution of boundary layer processes. The influence of key process representations is inferred. The high degree of fidelity in these simulations leads us to anticipate incorporation of realtime, highly resolved observations into a multiscale carbon cycle analysis system that will begin to bridge the gap between top-down and bottom-up flux estimation, which is a primary focus of NACP.

Collatz, G. James↗
NASA NTRS2014

Natural Ocean Carbon Cycle Sensitivity to Parameterizations of the Recycling in a Climate Model

Sensitivities of the oceanic biological pump within the GISS (Goddard Institute for Space Studies ) climate modeling system are explored here. Results are presented from twin control simulations of the air-sea CO2 gas exchange using two different ocean models coupled to the same atmosphere. The two ocean models (Russell ocean model and Hybrid Coordinate Ocean Model, HYCOM) use different vertical coordinate systems, and therefore different representations of column physics. Both variants of the GISS climate model are coupled to the same ocean biogeochemistry module (the NASA Ocean Biogeochemistry Model, NOBM), which computes prognostic distributions for biotic and abiotic fields that influence the air-sea flux of CO2 and the deep ocean carbon transport and storage. In particular, the model differences due to remineralization rate changes are compared to differences attributed to physical processes modeled differently in the two ocean models such as ventilation, mixing, eddy stirring and vertical advection. GISSEH(GISSER) is found to underestimate mixed layer depth compared to observations by about 55% (10 %) in the Southern Ocean and overestimate it by about 17% (underestimate by 2%) in the northern high latitudes. Everywhere else in the global ocean, the two models underestimate the surface mixing by about 12-34 %, which prevents deep nutrients from reaching the surface and promoting primary production there. Consequently, carbon export is reduced because of reduced production at the surface. Furthermore, carbon export is particularly sensitive to remineralization rate changes in the frontal regions of the subtropical gyres and at the Equator and this sensitivity in the model is much higher than the sensitivity to physical processes such as vertical mixing, vertical advection and mesoscale eddy transport. At depth, GISSER, which has a significant warm bias, remineralizes nutrients and carbon faster thereby producing more nutrients and carbon at depth, which eventually resurfaces with the global thermohaline circulation especially in the Southern Ocean. Because of the reduced primary production and carbon export in GISSEH compared to GISSER, the biological pump efficiency, i.e., the ratio of primary production and carbon export at 75 m, is half in the GISSEH of that in GISSER, The Southern Ocean emerges as a key region where the CO2 flux is as sensitive to biological parameterizations as it is to physical parameterizations. The fidelity of ocean mixing in the Southern Ocean compared to observations is shown to be a good indicator of the magnitude of the biological pump efficiency regardless of physical model choice.

Antarctic Ocean↗
NASA NTRS2023

Global Radiative Flux Profile Dataset: Revised and Extended

The third generation of the radiative flux profile data product, called ISCCP-FH, is described. The revisions over the previous generation (called ISCCP-FD) include improvements in the radiative model representation of gaseous and aerosol effects, as well as a refined statistical model of cloud vertical layer variations with cloud types, and increased spatial resolution. The new product benefits from the changes in the new H-version of the ISCCP cloud products (called ISCCP-H): higher spatial resolution, revised radiance calibration and treatment of ice clouds, treatment of aerosol effects, and revision of all the ancillary atmosphere and surface property products. The ISCCP-FH product is evaluated against more direct measurements from the Clouds and the Earth’s Radiant Energy System and the Baseline Surface Radiation Network products, showing some small, overall reductions in average flux uncertainties; but the main results are similar to ISCCP-FD: the ISCCP-FH uncertainties remain ≲10 Wm −2 at the top-of-atmosphere (TOA) and ≲15 Wm −2 at surface for monthly, regional averages. The long-term variations of TOA, surface and in-atmosphere net fluxes are documented and the possible transient cloud feedback implications of a long-term change of clouds are investigated. The cloud and flux variations from 1998 to 2012 suggest a positive cloud-radiative feedback on the oceanic circulation and a negative feedback on the atmospheric circulation. This example demonstrates that the ISCCP-FH product can provide useful diagnostic information about weather-to-interannual scale variations of radiation induced by changes in cloudiness as well as atmospheric and surface properties.

ISCCP-FH↗
DOE OSTI2022

Gauge symmetry breaking with fluxes and natural Standard Model structure from exceptional GUTs in F-theory

We give a general description of gauge symmetry breaking using vertical and remainder fluxes in 4D F-theory models. The fluxes can break a geometric gauge group to a smaller group and induce chiral matter, even when the larger group admits no chiral matter representations. We focus specifically on applications to realizations of the Standard Model gauge group and chiral matter spectrum through breaking of rigid exceptional gauge groups E 7 , E 6 , which are ubiquitous in the 4D F-theory landscape. Supplemented by an intermediate SU(5) group, these large classes of models give natural constructions of Standard Model-like theories with small numbers of generations of matter in F-theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2024

Assessing Acetone for the GISS ModelE2.1 Earth System Model

Acetone is an abundant volatile organic compound (VOC) in the atmosphere, with important influences on ozone and oxidation capacity. Direct sources include chemical production from other VOCs and anthropogenic emissions, terrestrial vegetation, biomass-burning emissions, and ocean production. Sinks include chemical loss, deposition onto the land surface, and ocean uptake. Acetone also has a lifetime that is long enough to allow transport and reactions with other compounds remote from its sources. The NASA Goddard Institute for Space Studies (GISS) Earth system model ModelE2.1 simulates a variety of Earth system interactions. Previously, acetone had a very simplistic representation in the ModelE chemical scheme. This study assesses a more sophisticated acetone scheme in which acetone is a full 3-dimensional tracer with explicit sources, sinks, and atmospheric transport. We first evaluate the new global acetone budget in the context of past literature. Estimated source and sink fluxes fall within the range of previous models, although total atmospheric burden and lifetime are at the lower end of the published literature. Acetone's new representation in ModelE2.1 also results in more realistic spatial and vertical distributions, which we compare against previous models and field observations. The seasonality of acetone-related processes was also studied in conjunction with field measurements, and these comparisons show promising agreement but also shortcomings at high-emission urban locations, where the model's resolution is too coarse to capture the true behavior. Finally, we conduct a variety of sensitivity studies that explore the influence of key parameters on the acetone budget and its global distribution. An impactful finding is that the production of acetone from precursor hydrocarbon oxidation has strong leverage on the overall chemical source, indicating the importance of accurate molar yields. Overall, our implementation is one that corroborates with previous studies and marks a significant improvement in the development of the acetone tracer in GISS ModelE2.1.

Acetone↗
NASA NTRS2021

The GF Convection Parameterization: Recent Developments, Extensions, and Applications

Recent developments and options in the GF (Grell and Freitas, 2014, Freitas et al.,2018) convection parameterization are presented. The parameterization has been expanded to atrimodal spectral size to simulate three convection modes: shallow, congestus and deep. Incontrast to usual entrainment/detrainment assumptions, we assume that Beta Functions (BFs),commonly applied to represent Probability Density Functions (PDF’s), can be used tocharacterize the vertical mass flux profiles for the three modes, and use the BFs to deriveentrainment and detrainment rates. We also added a new closure for non-equilibrium convectionthat improved the simulation of the diurnal cycle of convection, with a better representation ofthe transition from shallow to deep convection regimes over land. The transport of chemicalconstituents (including wet deposition) can be treated inside the GF scheme. The tracer transportis handled in flux form and is mass conserving. Finally, the cloud microphysics has beenextended to include the ice phase to simulate the conversion from liquid water to ice in updraftswith resulting additional heat release and the melting from snow to rain.

Saulo R De Freitas↗
DOE OSTI2025

Entanglement entropy of a color flux tube in (1+1)D Yang–Mills theory

In recent work Amorosso et al. (2024), we computed a novel flux tube entanglement entropy (FTE) of the color flux tube stretched between a heavy quark-antiquark pair on a Euclidean lattice in (2+1)D Yang–Mills theory. Our numerical results suggested that FTE can be partitioned into an internal color entanglement entropy and a vibrational entropy corresponding to the transverse excitations of a QCD string, with the latter described by a thin string model. Since the color flux tube does not have transverse excitations in (1+1)D Yang–Mills theory, we use this simpler framework to perform an exact analytical computation of the contribution of the internal color degrees of freedom to FTE. For the multipartite partitioning of the color flux tube, we find the remarkable result that FTE depends only on the dimension of the color group representation and the number of times the flux tube crosses the boundary between the traced and untraced spatial regions but not on the string length. Our proof is independent of whether the replica and region boundaries on the lattice are placed on vertices or in plaquette centers.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2012

Characterization of Turbulent Latent and Sensible Heat Flux Exchange Between the Atmosphere and Ocean in MERRA

Turbulent fluxes of heat and moisture across the atmosphere-ocean interface are fundamental components of the Earth's energy and water balance. Characterizing both the spatiotemporal variability and the fidelity of these exchanges of heat and moisture is critical to understanding the global water and energy cycle variations, quantifying atmosphere-ocean feedbacks, and improving model predictability. This study examines the veracity of the recently completed NASA Modern-Era Retrospective analysis for Research and Applications (MERRA) product with respect to its representation of the surface turbulent heat fluxes. A validation of MERRA turbulent heat fluxes and near-surface bulk variables at local, high-resolution space and time scales is achieved by making comparisons to a large suite of direct observations. Both in situ and satellite-observed gridded surface heat flux estimates are employed to investigate the spatial and temporal variability of the surface fluxes with respect to their annual mean climatologies, their seasonal covariability of near-surface bulk parameters, and their representation of extremes. The impact of data assimilation on the near-surface parameters is assessed through evaluation of incremental analysis update tendencies produced by the assimilation procedure. It is found that MERRA turbulent surface heat fluxes are relatively accurate for typical conditions but have systematically weak vertical gradients in moisture and temperature and have a weaker covariability between the near-surface gradients and wind speed than found in observations. This results in an underestimate of the surface latent and sensible heat fluxes over the western boundary current and storm track regions. The assimilation of observations mostly acts to bring MERRA closer to observational products by increasing moisture and temperature near the surface and decreasing the near-surface wind speeds. The major patterns of spatial and temporal variability of the turbulent heat fluxes produced by MERRA compare favorably to observationally based estimates. However, MERRA is distinct in terms of amplitude. These results suggest that MERRA is likely to be a valuable resource for a number of research applications though, as with all turbulent flux estimates, systematic issues should be taken into account

Robert, J. Brent↗
NASA NTRS2012

Characterization of Turbulent Latent and Sensible Heat Flux Exchange Between the Atmosphere and Ocean in MERRA

Turbulent fluxes of heat and moisture across the atmosphere-ocean interface are fundamental components of the Earth s energy and water balance. Characterizing both the spatiotemporal variability and the fidelity of these exchanges of heat and moisture is critical to understanding the global water and energy cycle variations, quantifying atmosphere-ocean feedbacks, and improving model predictability. This study examines the veracity of the recently completed NASA Modern-Era Retrospective analysis for Research and Applications (MERRA) product with respect to its representation of the surface turbulent heat fluxes. A validation of MERRA turbulent heat fluxes and near-surface bulk variables at local, high-resolution space and time scales is achieved by making comparisons to a large suite of direct observations. Both in situ and satellite-observed gridded surface heat flux estimates are employed to investigate the spatial and temporal variability of the surface fluxes with respect to their annual mean climatologies, their seasonal covariability of near-surface bulk parameters, and their representation of extremes. The impact of data assimilation on the near-surface parameters is assessed through evaluation of incremental analysis update tendencies produced by the assimilation procedure. It is found that MERRA turbulent surface heat fluxes are relatively accurate for typical conditions but have systematically weak vertical gradients in moisture and temperature and have a weaker covariability between the near-surface gradients and wind speed than found in observations. This results in an underestimate of the surface latent and sensible heat fluxes over the western boundary current and storm track regions. The assimilation of observations mostly acts to bring MERRA closer to observational products by increasing moisture and temperature near the surface and decreasing the near-surface wind speeds. The major patterns of spatial and temporal variability of the turbulent heat fluxes produced by MERRA compare favorably to observationally based estimates. However, MERRA is distinct in terms of amplitude. These results suggest that MERRA is likely to be a valuable resource for a number of research applications though, as with all turbulent flux estimates, systematic issues should be taken into account.

Roberts, J. Brent↗
NASA NTRS1986

Constraints on geomagnetic secular variation modeling from electromagnetism and fluid dynamics of the Earth's core

A spherical harmonic representation of the geomagnetic field and its secular variation for epoch 1980, designated GSFC(9/84), is derived and evaluated. At three epochs (1977.5, 1980.0, 1982.5) this model incorporates conservation of magnetic flux through five selected patches of area on the core/mantle boundary bounded by the zero contours of vertical magnetic field. These fifteen nonlinear constraints are included like data in an iterative least squares parameter estimation procedure that starts with the recently derived unconstrained field model GSFC (12/83). Convergence is approached within three iterations. The constrained model is evaluated by comparing its predictive capability outside the time span of its data, in terms of residuals at magnetic observatories, with that for the unconstrained model.

Benton, E. R.↗
NASA NTRS2011

Simulation of the Indian Summer Monsoon Using Comprehensive Atmosphere-land Interactions, in the Absence of Two-way Air-sea Interactions

Community Land Model version 2 (CLM2) as a comprehensive land surface model and a simple land surface model (SLM) were coupled to an atmospheric climate model to investigate the role of land surface processes in the development and the persistence of the South Asian summer monsoon. Two-way air-sea interactions were not considered in order to identify the reproducibility of the monsoon evolution by the comprehensive land model, which includes more realistic vertical soil moisture structures, vegetation and 2-way atmosphere-land interactions at hourly intervals. In the monsoon development phase (May and June). comprehensive land-surface treatment improves the representation of atmospheric circulations and the resulting convergence/divergence through the improvements in differential heating patterns and surface energy fluxes. Coupling with CLM2 also improves the timing and spatial distribution of rainfall maxima, reducing the seasonal rainfall overestimation by approx.60 % (1.8 mm/d for SLM, 0.7 mm/dI for CLM2). As for the interannual variation of the simulated rainfall, correlation coefficients of the Indian seasonal rainfall with observation increased from 0.21 (SLM) to 0.45 (CLM2). However, in the mature monsoon phase (July to September), coupling with the CLM2 does not exhibit a clear improvement. In contrast to the development phase, latent heat flux is underestimated and sensible heat flux and surface temperature over India are markedly overestimated. In addition, the moisture fluxes do not correlate well with lower-level atmospheric convergence, yielding correlation coefficients and root mean square errors worse than those produced by coupling with the SLM. A more realistic representation of the surface temperature and energy fluxes is needed to achieve an improved simulation for the mature monsoon period.

Monsoon Precipitation↗
NASA NTRS1987

Parametric representation of heat and moisture fluxes in cloud-topped mixed layers

The Betts (1973, 1978) parametrization of heat and moisture fluxes is tested using measurements made in thin, broken, and solid stratocumulus clouds by the NCAR Electra off the California coast in June 1976. The turbulence data are used to determine updraft-downdraft properties, heat and moisture fluxes, spectra, and cospectra. From the convective properties, vertical mass flux profiles are obtained and examined for consistency. A convective scaling which is appropriate for cloud-topped mixed layers is discussed. The results demonstrate the usefulness of a mass flux formulation in modeling applications for cloud conditions varying between solid and broken.

Penc, Richard S.↗