SEARCH · Search NASA

Results for “vs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Advantages of High vs. Low Earth Orbit for SIRTF

While the subject of this workshop, which we will refer to as ET (for Enlightenment Telescope), is a dazzling successor to the Hubble Space Telescope, its location is unlikely to be the Low Earth Orbit (LEO) used by HST. Locations suggested for ET include High Earth Orbit (HEO) and the moon. The first space telescope to occupy HEO will be the liquid helium cooled Space Infrared Telescope Facility (SIRTF). The selection of HEO for SIRTF was the outcome of a recent study led by the Ames Research Center which showed significant advantages for SIRTF in HEO vs. LEO. This article summarizes the main results of that study. We begin with a review of SIRTF's rationale and requirements, in part because the IR capabilities and low temperature proposed for ET make it something of a successor to SIRTF as well as to HST. We conclude with some comments about another possible location for both SIRTF and ET, the Earth-Sun L2 Lagrangian point.

Eisenhardt, Peter↗

NASA NTRS1999

On Orbit Measurement of Response vs. Scan Angle for the Infrared Bands on TRMM/VIRS

The Visible and Infrared Scanner on the Tropical Rainfall Measuring Mission (TRMM/VIRS) is a whiskbroom imaging radiometer with two reflected solar bands and three emissive infrared bands. All five detectors are on a single cooled focal plane. This configuration necessitated the use of a paddlewheel scan mirror to avoid the effects of focal plane rotation that arise when using a scan mirror that is inclined to its axis of rotation. System radiometric requirements led to the need for protected silver as the mirror surface. Unfortunately, the SiO(x) coatings currently used to protect silver from oxidation introduce a change in reflectance with angle of incidence (AOI). This AOI dependence results in a modulation of system level response with scan angle. Measurement of system response vs. scan angle (RVS) was not difficult for the VIRS reflected solar bands, but attaining the required accuracy for the IR bands in the laboratory was not possible without a large vacuum chamber and a considerable amount of custom designed testing apparatus. Therefore, the decision was made to conduct the measurement on-orbit. On three separate occasions, the TRMM spacecraft was rotated about its pitch axis and, after the nadir view passed over the Earth's limb, the VIRS performed several thousand scans while viewing deep space. The resulting data has been analyzed and the RVS curves generated for the three IR bands are being used in the VIRS radiometric calibration algorithm. This, to our knowledge, the first time this measurement has been made on-orbit. Similar measurements are planned for the EOS-AM and EOS-PM MODIS sensors and are being considered for several systems under development. The VIRS on-orbit results will be compared to VIRS and MODIS system level laboratory measurements, MODIS scan mirror witness sample measurements and modeled data.

Barnes, William L.↗

NASA NTRS1996

The " Swarm of Ants vs. Herd of Elephants" Debated Revisited: Performance Measurements of PVM-Overflow Across a Wide Spectrum of Architectures

The Gorden Bell Prizes given out at Supercomputing every year includes at least two catergories: performance (highest GFLOP count) and price-performance (GFLOP/million $$) for real applications. In the past five years, the winners of the price-performance categories all came from networks of work-stations. This reflects three important facts: 1. supercomputers are still too expensive for the masses; 2. achieving high performance for real applications takes real work; and, most importantly; 3. it is possible to obtain acceptable performance for certain real applications on network of work stations. With the continued advance of network technology as well as increased performance of "desktop" workstation, the "Swarm of Ants vs. Herd of Elephants" debate, which began with vector multiprocessors (VPPs) against SIMD type multiprocessors (e.g. CM2), is now recast as VPPs against Symetric Multiprocessors (SMPs, e.g. SGI PowerChallenge). This paper reports on performance studies we performed solving a large scale (2-million grid pt.s) CFD problem involving a Boeing 747 based on a parallel version of OVERFLOW that utilizes message passing on PVM. A performance monitoring tool developed under NASA HPCC, called AIMS, was used to instrument and analyze the the performance data thus obtained. We plan to compare its performance data obtained across a wide spectrum of architectures including: the Cray C90, IBM/SP2, SGI/Power Challenge Cluster, to a group of workstations connected over a simple network. The metrics of comparison includes speed-up, price-performance, throughput, and turn-around time. We also plan to present a plan of attack for various issues that will make the execution of Grand Challenge Applications across the Global Information Infrastructure a reality.

Yan, Jerry C.↗

NASA NTRS2001

Gravity Estimation from a Simulated GRACE Mission: Short vs. Long Arcs

We present simulations of gravity estimation from a GRACE-like satellite mission: low-low intersatellite tracking with a precision of order 1 micron s(exp -1) yielding gravity fields of degree and order 120. We employ a unique parameterization of the intersatellite baseline vector which allows the gravity estimation to be performed (relatively) independently of the GPS (global positioning system) tracking data once sufficiently accurate orbits are obtained. This considerably simplifies data processing during the gravity estimation. During that process only certain components of the baseline parameterization need be adjusted; other components are uncorrelated with gravity and may be adopted unchanged from the initial GPS orbits. The technique is also amenable to very short arcs of data. We present comparisons of gravity estimation from 30 days of observations with arcs of length 15 minutes vs. arcs of one day. Our 'truth' field is the EGM96 (Earth Gravitational Model) model; our prior field is a degree-70 clone of EGM96, perturbed from it by amounts comparable to the standard errors of EGM96 (and identically zero for degrees 71-120). For a high inclination orbit, the short-arc analysis recovers low order gravity coefficients remarkably well, although higher order terms, especially sectorial terms, are understandably less accurate. The simulations suggest that either long or short arcs of GRACE data are likely to improve parts of the geopotential spectrum by several orders of magnitude. This is especially so for low order coefficients, which are markedly improved for all degrees through 120.

Rowlands, David D.↗

NASA NTRS2001

Relative effectiveness of kinetic analysis vs single point readings for classifying environmental samples based on community-level physiological profiles (CLPP)

The relative effectiveness of average-well-color-development-normalized single-point absorbance readings (AWCD) vs the kinetic parameters mu(m), lambda, A, and integral (AREA) of the modified Gompertz equation fit to the color development curve resulting from reduction of a redox sensitive dye from microbial respiration of 95 separate sole carbon sources in microplate wells was compared for a dilution series of rhizosphere samples from hydroponically grown wheat and potato ranging in inoculum densities of 1 x 10(4)-4 x 10(6) cells ml-1. Patterns generated with each parameter were analyzed using principal component analysis (PCA) and discriminant function analysis (DFA) to test relative resolving power. Samples of equivalent cell density (undiluted samples) were correctly classified by rhizosphere type for all parameters based on DFA analysis of the first five PC scores. Analysis of undiluted and 1:4 diluted samples resulted in misclassification of at least two of the wheat samples for all parameters except the AWCD normalized (0.50 abs. units) data, and analysis of undiluted, 1:4, and 1:16 diluted samples resulted in misclassification for all parameter types. Ordination of samples along the first principal component (PC) was correlated to inoculum density in analyses performed on all of the kinetic parameters, but no such influence was seen for AWCD-derived results. The carbon sources responsible for classification differed among the variable types with the exception of AREA and A, which were strongly correlated. These results indicate that the use of kinetic parameters for pattern analysis in CLPP may provide some additional information, but only if the influence of inoculum density is carefully considered. c2001 Elsevier Science Ltd. All rights reserved.

NASA Center KSC↗

NASA NTRS2004

Radiobrightness Forward Modelling vs Observations from Local to Satellite Scales during the 2003 NASA Cold Land Processes Experiment

A key issue for passive microwave Earth sensing applications is subpixel heterogeneity and its role in the connection between local-scale conditions vs. what is observed at the satellite footprint scale. The recently-completed NASA Cold Land Processes Field Experiment (CLPX-1) was designed to provide microwave remote sensing observations and ground truth for studies of snow and from ground remote sensing, particularly issues related to scaling. CLPX-1 was conducted in the spring of 2003 in Colorado, USA. Measurements of radiobrightness were made with nested footprint sizes ranging from scales of meters at a single site to 25 x 25 km across the entire CLPX-1 domain. Corresponding measurements of snowpack conditions (snow depth and temperature. density, and grain size profiles) as well as weather analyses were used to provide input data for forward radiative transfer model investigations. This paper will focus on the ability of forward modelling, based primarily on Dense Medium Radiative Transfer (DMRT) theory, combined with snowpack measurements and weather data to reproduce the radiobrightness signatures observed at multiple scales during both the third and fourth Intensive Observing Periods (February and March, 2003). The conditions include both wet and dry periods as well as a variety of forest cover conditions, providing a valuable test of model performance. These analyses will help guide the choice of future snow retrieval algorithm and the design of future Cold Lands observing systems.

Kim, Edward J.↗

NASA NTRS2002

Evaluation of Graphite Fiber/Polyimide PMCs from Hot Melt vs Solution Prepreg

Carbon fiber reinforced high temperature polymer matrix composites (PMC) have been extensively investigated as potential weight reduction replacements of various metallic components in next generation high performance propulsion rocket engines. The initial phase involves development of comprehensive composite material-process-structure-design-property-in-service performance correlations and database, especially for a high stiffness facesheet of various sandwich structures. Overview of the program plan, technical approaches and current multi-team efforts will be presented. During composite fabrication, it was found that the two large volume commercial prepregging methods (hot-melt vs. solution) resulted in considerably different composite cure behavior. Details of the process-induced physical and chemical modifications in the prepregs, their effects on composite processing, and systematic cure cycle optimization studies will be discussed. The combined effects of prepregging method and cure cycle modification on composite properties and isothermal aging performance were also evaluated.

Shin, E. Eugene↗

NASA NTRS2009

Unsteady Extinction of Opposed Jet Ethylene/Methane HIFiRE Surrogate Fuel Mixtures vs Air

A unique idealized study of the subject fuel vs. air systems was conducted using an Oscillatory-input Opposed Jet Burner (OOJB) system and a newly refined analysis. Extensive dynamic-extinction measurements were obtained on unanchored (free-floating) laminar Counter Flow Diffusion Flames (CFDFs) at 1-atm, stabilized by steady input velocities (e.g., U(sub air)) and perturbed by superimposed in-phase sinusoidal velocity inputs at fuel and air nozzle exits. Ethylene (C2H4) and methane (CH4), and intermediate 64/36 and 15/85 molar percent mixtures were studied. The latter gaseous surrogates were chosen earlier to mimic ignition and respective steady Flame Strengths (FS = U(sub air)) of vaporized and cracked, and un-cracked, JP-7 "like" kerosene for a Hypersonic International Flight Research Experimentation (HIFiRE) scramjet. For steady idealized flameholding, the 100% C2H4 flame is respectively approx. 1.3 and approx.2.7 times stronger than a 64/36 mix and CH4; but is still 12.0 times weaker than a 100% H2-air flame. Limited Hot-Wire (HW) measurements of velocity oscillations at convergent-nozzle exits, and more extensive Probe Microphone (PM) measurements of acoustic pressures, were used to normalize Dynamic FSs, which decayed linearly with pk/pk U(sub air) (velocity magnitude, HW), and also pk/pk P (pressure magnitude, PM). Thus Dynamic Flame Weakening (DFW) is defined as % decrease in FS per Pascal of pk/pk P oscillation, namely, DFW = -100 d(U(sub air)/U(sub air),0Hz)/d(pkpk P). Key findings are: (1) Ethylene flames are uniquely strong and resilient to extinction by oscillating inflows below 150 Hz; (2) Methane flames are uniquely weak; (3) Ethylene / methane surrogate flames are disproportionately strong with respect to ethylene content; and (4) Flame weakening is consistent with limited published results on forced unsteady CFDFs. Thus from 0 to approx. 10 Hz and slightly higher, lagging diffusive responses of key species led to progressive phase lags (relative to inputs) in the oscillating flames, and caused maximum weakening. At 20 to 150 Hz, diffusion-rate-limited effects diminished, causing flames to "regain strengnth," and eventually become completely insensitive beyond 300 Hz. Detailed mechanistic understanding is needed. Overall, ethylene flames are remarkably resilient to dynamic extinction by oscillating inflows. They are the strongest, with the notable exception of H2. For HIFiRE tests, the 64%/36% surrogate disproportionally retains the high dynamic FS of ethylene, so the potential for loss of scramjet flameholding (flameout) due to low frequency oscillations is significantly mitigated.

Vaden, Sarah N.↗

NASA NTRS2011

"Solar-Wind-Rich" Howardite: True Regolith vs. CM-Implanted Components

Howardite, eucrite and diogenite meteorites (collectively HED) likely originate from asteroid 4-Vesta [1], one of two asteroids targeted by NASA s Dawn mission. Many howardites (polymict breccias of E and D material) contain "regolithic" features, including impact-melt clasts, fragmental breccia clasts, and carbonaceous chondrite fragments. True regolithic nature can be determined through noble gas analysis, as Solar Wind (SW) is implanted into the upper-most surfaces of solar system bodies. Whilst previous work [2] suggested that high siderophile element contents (e.g. Ni of 300-1200 g/g) were regolith indicators, we found no obvious correlation between SW and these indicators in our initial howardite noble gas analyses [3]. We observed CM-like fragments in a number of our howardites, whose textures suggest late addition to the breccia assemblage [4]. As typical CMs contain mixtures of SW (in matrix) and planetary (in clasts) components [5], we investigate the dominance of such components in SW-rich howardites. This will help deter-mine the extent of implanted SW in HED grains vs. SW and planetary gases from CM fragments, and allow better understanding of regolith processes

Cartwright, Julia A.↗

NASA NTRS2014

Wake Vortex Detection: Phased Microphone vs. Linear Infrasonic Array

Sensor technologies can make a significant impact on the detection of aircraft-generated vortices in an air space of interest, typically in the approach or departure corridor. Current state-of-the art sensor technologies do not provide three-dimensional measurements needed for an operational system or even for wake vortex modeling to advance the understanding of vortex behavior. Most wake vortex sensor systems used today have been developed only for research applications and lack the reliability needed for continuous operation. The main challenges for the development of an operational sensor system are reliability, all-weather operation, and spatial coverage. Such a sensor has been sought for a period of last forty years. Acoustic sensors were first proposed and tested by National Oceanic and Atmospheric Administration (NOAA) early in 1970s for tracking wake vortices but these acoustic sensors suffered from high levels of ambient noise. Over a period of the last fifteen years, there has been renewed interest in studying noise generated by aircraft wake vortices, both numerically and experimentally. The German Aerospace Center (DLR) was the first to propose the application of a phased microphone array for the investigation of the noise sources of wake vortices. The concept was first demonstrated at Berlins Airport Schoenefeld in 2000. A second test was conducted in Tarbes, France, in 2002, where phased microphone arrays were applied to study the wake vortex noise of an Airbus 340. Similarly, microphone phased arrays and other opto-acoustic microphones were evaluated in a field test at the Denver International Airport in 2003. For the Tarbes and Denver tests, the wake trajectories of phased microphone arrays and lidar were compared as these were installed side by side. Due to a built-in pressure equalization vent these microphones were not suitable for capturing acoustic noise below 20 Hz. Our group at NASA Langley Research Center developed and installed an infrasonic array at the Newport News-Williamsburg International Airport early in the year 2013. A pattern of pressure burst, high-coherence intervals, and diminishing-coherence intervals was observed for all takeoff and landing events without exception. The results of a phased microphone vs. linear infrasonic array comparison will be presented.

Shams, Qamar A.↗

NASA NTRS2017

Key Differences in Operating a Rover on the Moon vs. Mars

The command and control model for spacecraft operations, as well as the distribution of tasks between ground assets and in space assets, whether with a crew or solely robotic, is fundamentally constrained by the round trip light time between the space asset and the control facility (presumably on Earth, though not required). For an asset on Mars, the round trip light time varies, from roughly fourteen minutes to up to forty minutes. For a Lunar asset the round-trip light time is measured in only a few seconds, but current communications systems may more than double the latency with system overhead. For a Lunar Asset the total command latency may range from six seconds to more than forty, depending on communications overhead and data rates. Further, these variables are not always predictable, thus complicating operations. There are several differentiating factors for Lunar vs. Mars operations, Round trip light time/Atmosphere/Lighting and ShadowsTerrain type and knowledge/Round trip light time has implications for the distribution of tasks between ground and in space assets. Even at Lunar Distances, the combination of round trip light time plus communications systems overhead does not enable joy stick driving of a rover. The best that can be done, if driving from Earth, is near real time command and control. By 2030, driving from in space may be possible. Productivity on Mars requires either long operational sequences of commands, as is done for current rovers such as Curiosity, significant autonomous capability or, as may be possible by 2030, command and control support from space. Another implication of the long round trip light time from Earth to Mars, is that flight software functions must be resident on the in space asset. On the Moon, there is considerably more flexibility, enabling processing functions, to be resident on Earth or in space. This provides the opportunity to take advantage of the considerable processing power available on the ground, but may be constrained by data rates. On the Moon, for practical operational purposes, there is no atmosphere. Hence there is no scattering of light in the shadows. This has implications for image interpretation and driving near the poles. The Moon has permanently shadowed regions (PSR), unique terrain with unknown surface properties. With no scattering of light in shadows, driving on the Moon, particularly at the poles, where we have strong evidence of water, may prove to be hazardous and complex, requiring non-optical sensors, such as LIDAR.

Trimble, Jay↗

NASA NTRSDate not supplied

Monte Carlo Study of the Formation of Chromosome Aberrations by Direct Ion Traversal vs. Delta-Electrons

Space radiation constitutes a major risk for the safety of space travel. Galactic Cosmic Rays (GCRs) are made of high energy protons (87%), high energy helium ions (12%) and high-charge and energy (HZE) ions [1]. At a cellular scale, HZE ions display a characteristic pattern of energy deposition, known as the ion track, that correlates with the ion linear energy transfer (LET). These energy deposition events (ionizations/excitations) create DNA breaks that, if misrepaired, lead to the formation of chromosome aberrations (CAs). Compared to low-LET terrestrial radiations (X-rays and γ-rays), high LET ions are known to create complex, clustered DNA breaks that are particularly efficient at forming CAs. Indeed, ion tracks are usually described as a dense ionization core, where clustered breaks are formed, and a penumbra, made of low-LET δ-electrons that have sufficient energy to travel across many cells and induce breaks that are more homogeneously distributed. In this work, we investigated the formation of CAs, and separated them into two contributions (direct ion traversal of the nucleus vs.δ-electrons), to elucidate to which extent δ-electrons contribute to CA formation.

Floriane Poignant↗

NASA NTRSDate not supplied

The Impact of Impulsive Vs Finite Maneuver Modeling on Launch Transfer Trajectories for The Roman Space Telescope

The Nancy Grace Roman Space Telescope (RST) is a flagship astrophysics observatory developed by the NASA Goddard Space Flight Center for launch in the mid-2020’s. The nominal mission orbit for RST is a Sun-Earth L2 quasi-halo orbit subject to stringent geometric and dynamical constraints necessary for achieving mission science objectives. After award of the launch vehicle contract to SpaceX, comparing the launch solutions produced by the RST Flight Dynamics team and the SpaceX team revealed that despite targeting the same interface states, modeling the second-stage insertion burn with an impulsive delta-V vs. a higher fidelity finite burn model can result in substantial differences in achieved libration point orbit properties. In this paper, these differences are explored and leveraged to update the models and targeting strategies used by the RST Flight Dynamics tools. These updates allow the mission to achieve more flight-like ascent and insertion dynamics for the libration point transfer, as well as reveal interesting relationships between the dynamics of impulsive models and finite burn models for libration point transfer trajectories in general.

Lauren Schlenker↗

NASA NTRS2023