Search NASA⌕ Search

SEARCH · Search NASA

Results for “warm fronts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Characterization of oceanic post-cold frontal clouds and their model representation. Final report

Low-level clouds are ubiquitous over the oceans, and their impact on the Earth’ radiative budget is important. However, general circulation models (GCMs) that are used to represent our climate and its evolution still experience problems to represent their correct amount and radiative impact. In the extratropical latitudes (~30-60 N/S), cloud properties are strongly modulated by the occurrence of anti-cyclones (high pressure systems) and cyclones (low pressure systems). While deep clouds dominate in cyclones near the center and along the cold and warm fronts, low-level clouds populate the colder regions of the cyclones, and more specifically the region in the wake of the cold fronts, the post-cold frontal region (PCF). The GCMs mentioned above were found to underestimate the amount of these PCF clouds, and this caused errors in their representation of the amount of solar radiation at the surface of the southern hemisphere oceans, causing an excess in absorption and errors in long-term predictions. To better understand which processes are ill-represented in the GCMs to cause such issues, we used ground-based observations from the Eastern North Atlantic (ENA) ARM site and a high resolution regional model (called WRF) to examine the properties of PCF clouds. With the WRF model, we simulated the passage of a cold front at the ENA site using theoretically distinct representations of convection and the physics of the boundary layer. While these physical representations had little impact on the timing, structure and circulation of the cold front, we found a high sensitivity to how the large scale information was fed into the model. Errors rapidly developed if the incoming flow information was injected too far from the site, but 1000 km was found to be an optimal distance between the outer boundary and the ENA site for a realistic cold front passage. With this model, we then conducted a series of experiment where convection and boundary layer schemes were changed, and revealed that 1) the clouds were more sensitive to the convection than boundary layer schemes and 2) the interaction between the two has a large impact. Furthermore, changing the representation of the physics in the model had greater impacts on PCF clouds than changing the initial conditions. As large-scale models increase their spatial resolution, convection will eventually be resolved but it remains that their representation of the physics of the boundary layer will matter for the correct representation of shallow (low-level) clouds. Observations were used to find which large-scale information had a clear relationship with PCF cloud and precipitation properties, in view of helping with GCM parameterizations and evaluation. Both lower troposphere stability and surface forcing were found to be important for PCF clouds that experience more vigorous dynamics than their tropical or subtropical counterparts. For cloud base and top heights, a simple measure of the change in potential temperature between the surface and the 800 hPa was found to be a good predictor. This relationship was found to hold as well when using data from campaigns recently conducted in the southern ocean south of Tasmania. A recent GCM was found to succeed in representing similar relations. For cloud depth, water content, and different characteristics of precipitation both the temperature contrast between the surface and near-air and the near-surface wind speed had a strong relationship. To summarize, through observational constraints and regional model experiments, the project has provided guidance to evaluate GCMs and tools to improve their representation of low-level clouds in the extratropics. It has also highlighted differences in behavior between these clouds and those typically found in the subtropics, thus opening new avenues of research for shallow clouds in general.

54 ENVIRONMENTAL SCIENCES↗

GEANT4 Simulations on Faraday Cup Design for PIP-II Laser Wire Scanner System

The PIP-II accelerator upgrade at Fermilab represents a groundbreaking leap forward in high-energy physics research. This ambitious initiative involves enhancing Fermilab's accelerator complex by replacing the current linear accelerator with a warm front end (WFE) capable of accelerating H- beams up to 2.1 MeV. Subsequently, a superconducting linac further accelerates these beams up to 800 MeV. To precisely measure the transverse beam profile, a combination of traditional wire scanners at the WFE section and Laser wire scanners along the superconducting linac are planned for implementation. This investigation centers on refining the Faraday cup design for the PIP-II Laser wire scanners by utilizing GEANT4, a Monte Carlo simulation toolkit. Leveraging this method enables a comprehensive analysis of particle trajectories, energy deposition, secondary electron emission, backscattering, etc., facilitating optimization through adjustments to cup geometries, materials, and placement to maximize its efficiency.

43 PARTICLE ACCELERATORS↗

Geant4-based Analysis of Faraday Cup Performance for PIP-II Laser Wire Scanner System

The Proton Improvement Plan-II (PIP-II) accelerator upgrade at Fermilab marks a significant advancement in high-energy physics research. This initiative aims to enhance Fermilab's accelerator complex by replacing the existing linear accelerator (linac) with a warm front end (WFE) capable of accelerating H- beams up to 2.1 MeV. Subsequently, a superconducting linac (SCL), that further accelerates these beams up to 800 MeV. To accurately measure the transverse beam profile, traditional wire scanners will be utilized in the WFE section, while Laser wire scanners will be implemented along the SCL. The Faraday cup for the Laser wire scanners has been designed using the GEANT4 simulation toolkit. This poster presents a detailed analysis of its performance along the SCL, focusing on electron absorption, secondary electron emission, backscattering, etc.

Wijethunga, S. A.K.↗

Controls Status for Fermilab’s PIP-II Project

Testing of Cryomodule first articles at PIP-II's on-site Cryomodule Test Facility (CMTF), where EPICS based controls are already being used, has been invaluable to the project. In addition to validating hardware and controls components, it has provided opportunities to build buy-in and illicit meaningful feedback early-on. A device naming convention has also been significantly refined with an internal working group and the PIP-II integration team. Compressed air and Process Control Water (PCW) systems have been installed, and operations has been engaged in Phoebus display development in preparation for a transition to operations for these systems by 2026. Cryoplant hardware has been put in place, and collaboration between controls and PIP-IIs cryo group for IOC and display development is well underway for commissioning of cryoplant systems to begin early 2026. The project has also received beneficial occupancy of the High-Bay Building in October 2025, keeping us on schedule for Warm Front End commissioning to begin in 2027.

Crisp, Dan [Fermilab]↗

Prediction of convective activity using a system of parasitic-nested numerical models

A limited area, three dimensional, moist, primitive equation (PE) model is developed to test the sensitivity of quantitative precipitation forecasts to the initial relative humidity distribution. Special emphasis is placed on the squall-line region. To accomplish the desired goal, time dependent lateral boundaries and a general convective parameterization scheme suitable for mid-latitude systems were developed. The sequential plume convective parameterization scheme presented is designed to have the versatility necessary in mid-latitudes and to be applicable for short-range forecasts. The results indicate that the scheme is able to function in the frontally forced squallline region, in the gently rising altostratus region ahead of the approaching low center, and in the over-riding region ahead of the warm front. Three experiments are discussed.

Perkey, D. J.↗

On the use of colour reflectivity plots to monitor the structure of the troposphere and stratosphere

The radar reflectivity, defined as the range squared corrected power of VHF radar echoes, can be used to monitor and study the temporal development of inversion layer, frontal boundaries and convective turbulence. From typical featurs of upward or downward motion of reflectivity structures, the advection/convection of cold and warm air can be predicted. High resolution color plots appear to be useful to trace and to study the life history of these structures, particularly their persistency, descent and ascent. These displays allow an immediate determination of the tropopause height as well as the determination of the tropopause structure. The life history of warm fronts, cold fronts, and occlusions can be traced, and these reflectivity plots allow detection of even very weak events which cannot be seen in the traditional meteorological data sets. The life history of convective turbulence, particular evolving from the planetary boundary layer, can be tracked quite easily. Its development into strong convection reaching the middle troposphere can be followed and predicted.

Rottger, J.↗

Frontogenesis over a mountain ridge

The interaction of developing two-dimensional cold and warm frontal systems with a mesoscale mountain ridge is examined. The basic equations and a scale analysis which isolates the parameters that describe the flow are discussed, and the governing equations and techniques used to solve the problem are presented. Frontal development in the absence of topography and features of the steady mountain flow field are considered. Model results are presented on the interaction of cold and warm fronts with topography.

Zehnder, Joseph A.↗

Synoptic conditions producing cirrus during the FIRE cirrus IFO

Although direct observations of cirrus clouds by the FIRE research aircraft were usually confined to the area of Intensive Field Observation (IFO) surface network, these cirrus were generally part of a more extensive zone of upper level cloudiness. It is these large scale patterns of cirriform cloud and their relationship to the corresponding synoptic environment which are the prime focus. Three conceptual models are presented and each of the individual cases are classified into one of these categories. Although the cases manifest significant differences in intensity and small scale structure, it is believed that they are best viewed in this unified context. The descriptions given are mostly qualitative, however, quantitative descriptions of the synoptic control and its relationship to cloud structure for all the IFO cases are summarized. The synoptic situations in which extensive cirriform clouds were observed are classified into three basic types: warm front cases, cold front cases, and closed low aloft cases. A simplified summary of each type of situation is presented.

Starr, David OC.↗

Cyclogenesis in a saturated environment

The dynamics of baroclinic wave growth in a saturated environment is examined using linear and nonlinear models employing a parameterization of latent heat release that assumes all rising air is saturated, and saturation equivalent potential temperature is conserved on ascent. Piecewise potential vorticity (PV) diagnostics are used to interpret the results. When the stability to vertical displacements in saturated air is allowed to increase with height, as it must in an atmosphere with a constant, positive lapse rate of potential temperature, the growth rates of the most unstable modes of the Eady problem grow only marginally faster than the modes of the dry problem. The vertical variation of moist static stability produces a gradient of moist potential vorticity in the rising air, eliminating the short-wave cutoff present in the dry Eady problem. The destabilization of the short waves is shown to be associated with the interaction between surface potential temperature anomalies and diabatically generated lower-tropospheric potential vorticity anomalies. Nonlinear primitive equation simulations, starting from normal-mode initial conditions, show that while the dry wave grows at nearly the linear growth rate until maximum amplitude is reached, the moist wave grows significantly faster than the linear growth rate at finite amplitude. This enhanced growth is associated with the rapid amplification of a mesoscale PV anomaly generated by latent heat release at the warm front. The rapid amplification of the surface cyclone results from the superposition of the circulation associated with this misoscale PV anomaly upon the circulation associated with the surface and upper boundary potential temperature anomalies. Additional integrations with finite-amplitude initial conditions more typical of atmospheric conditions exhibit similar behavior. It is suggested that many of the rapid cyclogenesis events that occur as upper-troposheric PV anomalies cross the east coasts of continents may arise from the rapid generation of PV anomalies by condensational heating in the moist maritime lower troposphere.

Whitaker, Jeffrey S.↗

HL Canis Majoris in preoutburst and SS Cygni - The interoutburst disk instability

SS Cygni and HL Canis majoris were observed by IUE for three consecutive nights in November of 1992. During the first two nights, simultaneous photometric ground-based observations of SS Cyg were made at the Ball State University Observatory. Observations of SS Cyg and HL CMa were also obtained simultaneously with the 90-inch telescope at the Steward Observatory on the last two nights of the IUE run. These spectroscopic observations covered the wavelength range from 4100 to 5000 A, while the spectra taken with the short wavelength camera on IUE resulted in wavelength coverage from 1150 A to 1980 A. SS Cyg is a U Geminorum-type dwarf nova with an orbital period of 6.6 hr. Good simultaneous UV and optical orbital coverage was obtained for this system. HL CMa is a Z Camelopardalis-type dwarf nova with a mean outburst interval of 15 days. The American Association of Variable Star Observers (AAVSO) reports that this system was in outburst 4 days after the observing run. Therefore, HL CMa may have been in a preoutburst state during these observations. Optical spectra of HL CMa indicate a warm front passed through the outer disk four days before outburst, but no changes were seen in the UV spectra. Signs of a preoutburst state were observed to develop in SS Cyg, but no outburst occurred for another 30 days.

Mansperger, C. S.↗

Landslides in West Coast Metropolitan Areas: The Role of Extreme Weather Events

Rainfall-induced landslides represent a pervasive issue in areas where extreme rainfall intersects complex terrain. A farsighted management of landslide risk requires assessing how landslide hazard will change in coming decades and thus requires, inter alia, that we understand what rainfall events are most likely to trigger landslides and how global warming will affect the frequency of such weather events. We take advantage of 9 years of landslide occurrence data compiled by collating Google news reports and of a high-resolution satellite-based daily rainfall data to investigate what weather triggers landslide along the West Coast US. We show that, while this landslide compilation cannot provide consistent and widespread monitoring everywhere, it captures enough of the events in the major urban areas that it can be used to identify the relevant relationships between landslides and rainfall events in Puget Sound, the Bay Area, and greater Los Angeles. In all these regions, days that recorded landslides have rainfall distributions that are skewed away from dry and low-rainfall accumulations and towards heavy intensities. However, large daily accumulation is the main driver of enhanced hazard of landslides only in Puget Sound. There, landslide are often clustered in space and time and major events are primarily driven by synoptic scale variability, namely "atmospheric rivers" of high humidity air hitting anywhere along the West Coast, and the interaction of frontal system with the coastal orography. The relationship between landslide occurrences and daily rainfall is less robust in California, where antecedent precipitation (in the case of the Bay area) and the peak intensity of localized downpours at sub-daily time scales (in the case of Los Angeles) are key factors not captured by the same-day accumulations. Accordingly, we suggest that the assessment of future changes in landslide hazard for the entire the West Coast requires consideration of future changes in the occurrence and intensity of atmospheric rivers, in their duration and clustering, and in the occurrence of short-duration (sub-daily) extreme rainfall as well. Major regional landslide events, in which multiple occurrences are recorded in the catalog for the same day, are too rare to allow a statistical characterization of their triggering events, but a case study analysis indicates that a variety of synoptic-scale events can be involved, including not only atmospheric rivers but also broader cold- and warm-front precipitation. That a news-based catalog of landslides is accurate enough to allow the identification of different landslide/ rainfall relationships in the major urban areas along the US West Coast suggests that this technology can potentially be used for other English-language cities and could become an even more powerful tool if expanded to other languages and non-traditional news sources, such as social media.

landslides↗

Midlatitude Cloud Systems

In contrast to the tropics and subtropics, the middle latitudes are characterised by large meridional temperature gradients, created as a consequence of differential radiative heating between high and low latitudes. These meridional temperature gradients often concentrate in relatively narrow baroclinic zones that become unstable to wave-like perturbations called baroclinic eddies, or more commonly baroclinic storms or midlatitude cyclones. Baroclinic storms constitute the primary source of poleward energy transport at midlatitudes, which is accomplished through contrasting transports of warm air masses poleward (warm fronts) and cold air masses equatorward (cold fronts). Baroclinic storms also flux momentum into midlatitude regions, driving a region of enhanced westerly winds from the surface to the upper troposphere called the eddy-driven jet stream.

Midlatitude clouds↗

Controls Status of Fermilab's PIP-II Project

The Fermilab Proton Improvement Project II (PIP-II) is building a new Super Conducting Linear Accelerator (SCL) accelerating protons to 800 MeV for injection into the rest of the FNAL beam complex. Key progress since the last status report given at ICALEPCS includes the adoption of modern DevOps practices with continuous integration and GitOps-based deployments, commissioning of EPICS-based systems at the Cryomodule Test Facility, and integration of a Virtual Accelerator framework for application development ahead of installation. In parallel, web-based applications using Dart and Flutter have matured, providing secure, unified access to both EPICS and legacy ACNET data. Data acquisition and timing systems have also evolved. This paper presents the current state of controls, emphasizing these recent developments and outlining upcoming milestones as PIP-II approaches commissioning of its cryoplant in 2026 and the Warm Front End in 2027.

Crisp, D. B. [Fermilab]↗

Cosmic Ray Mediated Thermal Fronts in the Warm-Hot Circumgalactic Medium

We investigate the 1D plane-parallel front connecting the warm ($10^4$ K) and hot ($10^6$ K) phases of the circumgalactic medium (CGM), focusing on the influence of cosmic rays (CRs) in shaping these transition layers. We find that cosmic rays dictate the thermal balance while other fluxes (thermal conduction, radiative cooling, and gas flow) adjust to compensate. We compute column density ratios for selected transition temperature ions and compare them with observational data. While most of our models fail to reproduce the observations, a few are successful, although we make no claims for their uniqueness. Some of the discrepancies may indicate challenges in capturing the profiles in cooler, photoionized regions, as has been suggested for by previous efforts to model thermal transition layers.

79 ASTRONOMY AND ASTROPHYSICS↗

Turbulent statistics in the vicinity of an SST front: A north wind case, FASINEX February 16, 1986

The technique of boxcar variances and covariances is used to examine NCAR Electra data from FASINEX (Frontal Air-Sea Interaction EXperiment). This technique was developed to examine changes in turbulent fluxes near a sea surface temperature (SST) front. The results demonstrate the influence of the SST front on the MABL (Marine Atmospheric Boundary Layer). Data shown are for February 16, 1986, when the winds blew from over cold water to warm. The front directly produced horizontal variability in the turbulence. The front also induced a secondary circulation which further modified the turbulence.

Stage, Steven A.↗

Development of an End-to-End Demonstration Readout Chain for Athena-X-IFU

The X-IFU (X-ray Integral Field Unit) of the Athena (Advanced Telescope for High-ENergy Astrophysics) telescope, scheduled for launch in the early 2030's, will provide X-ray spectroscopy data with unprecedented spectral and spatial resolution. This will be achieved by a 3 kilo-pixel array of TES (transition-edge sensor) microcalorimeters. The complete detection chain is under development by a large international collaboration. The detector array will be provided by NASA Goddard Space Flight Center, the cold TDM (time domain multiplexing) electronics by NIST, the cold amplifier by VTT, the cold focal-plane assembly by SRON, the warm front-end electronics by APC, and the DRE (digital readout electronics) by IRAP. In order to perform an end-to-end demonstration of the X-IFU readout chain, a 50 mK test bench is being developed at IRAP in collaboration with CNES. The test bench is based on a two-stage ADR cryostat from Entropy GmbH and a 1024-pixel array from Goddard associated with its cold TDM readout from NIST. The setup will initially be validated using a warm electronic chain from NIST and Goddard. We will describe the complete system being installed in the cryostat and the first results obtained with these electronics. We will also review the status of the integration of the DRE prototype in the demonstration chain and the way forward in the integration and testing of the complete X-IFU readout chain.

S Beaumont↗

Beam Profile Measurements Utilizing an Amplitude Modulated Pulsed Fiber Laser at PIP2IT

Fermilab is undertaking the development of a new 800 MeV superconducting RF linac to replace its present normal conducting 400 MeV linac. The PIP-II linac consists of a warm front-end generating 2 mA of 2.1 MeV H⁻ followed immediately by a series of superconducting RF cryomodules to 800 MeV. To limit the potential damage to the superconducting RF cavities, PIP-II will utilize laser-based monitors to obtain beam profiles via photoionization. This paper will present the results of transverse and longitudinal beam profile measurements using a prototype profile monitor that was tested with 2.1 MeV H⁻ beam at the PIP-II Injector Test (PIP2IT) accelerator. This prototype profile monitor utilizes a high repetition rate fiber laser and fiber optic transport into the PIP2IT enclosure. In addition, results will be shown of narrow-band electron detection from amplitude modulated laser pulses.

43 PARTICLE ACCELERATORS↗

Resonance Control System for the PIP-II IT HWR Cryomodule

The HWR (half-wave-resonator) cryomodule is the first one in the superconducting section of the PIP-II LINAC project at Fermilab. PIP-II IT is a test facility for the project where the injector, warm front-end, and the first two superconducting cryomodules are being tested. The HWR cryomodule comprises 8 cavities operating at a frequency of 162.5 MHz and accelerating beam up to 10 MeV. Resonance control of the cavities is performed with a pneumatically operated slow tuner which compresses the cavity at the beam ports. Helium gas pressure in a bellows mounted to an end wall of the cavity is controlled by two solenoid valves, one on the pressure side and one on the vacuum side. The resonant frequency of the cavity can be controlled in one of two modes. A pressure feedback control loop can hold the cavity tuner pressure at a fixed value for the desired resonant frequency. Alternately, the feedback loop can regulate the cavity tuner pressure to bring the RF detuning error to zero. The resonance controller is integrated into the LLRF control system for the cryomodule. The control system design and performance of the resonance control system are described in this paper.

43 PARTICLE ACCELERATORS↗