Search NASA⌕ Search

SEARCH · Search NASA

Results for “wildland firefighting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

27 records · Page 2

SWS TechTalk Systems Modelling for SWS Safety Demonstrator 1 (SD-1): Wildfire Response Operations

Build out a System Safety Model for System-Wide Safety’s first Technical Challenge 5 (TC5) Safety Demonstrator (SD-1), which will be a demonstration of an In-Time Aviation Safety Management System in emerging wildfire response operations. Supporting the Systems Engineer and using Model-Based Systems Engineering (MBSE) practices, languages, and tools. Summer 2022 SD1 milestones: TC5-03-01 Initial Stakeholder Engagement Concept of Operations Development milestone and the upcoming TC5-03-02 Identification of key gaps and prioritization of NASA, SWS milestone.

model-based systems engineering↗

Addressing Critical Knowledge Gaps on Wildland Fires with UAS Technology

To better predict and respond to extreme fire behavior, wind shear, and superheated gases, there is a need for enhanced tactical microclimate wind forecasting. Collecting real-time or near-real-time three-dimensional atmospheric data during wildland fire suppression is vital for both ground firefighters and aviation safety. The use of balloons for soundings is not allowed due to aircraft operations, so new technology must be used. To address this need, the NASA FireSense Project has invested in co-developing and transitioning advanced technologies for atmospheric data collection to operational platforms to support decisions for wildland fire management. One of these technology investments has been with Uninhabited Aerial Systems (UAS) for atmospheric soundings. In collaboration with MITRE Corporation, a technology demonstration of Uninhabited Aerial Systems (UAS) for atmospheric soundings was held in Missoula, MT. This demonstration featured a NASA-designed payload on a Freefly Alta-X UAS, consistent with USFS UAS operations, balloon-borne soundings for data validation, and microscale modeling efforts. Results of this effort will be presented including comparison of forecasted conditions to data collection values as well as the impact on forecasts given real-time mixing heights and dispersion levels.

Jennifer Fowler↗

Hot on the Trail: Mapping Wildland Fires With Citizen Science and Live Image Processing

Heightened fire activity is straining existing firefighting resources and budgets across the nation and worldwide. For this reason, the 2021 NASA Academy at Langley Research Center has the challenge of applying NASA technology to the challenges faced by wild-land firefighting professionals. The approach is three-fold: Data Acquisition, Communications, and Equipment Development. The Communications Team focused on improving data latency for fire mapping and advancing communications between civilians and incident dispatch. The team developed two main concepts to address these areas: First, they tried to identify, map, and transmit fire perimeter data via an Uncrewed Aerial System (UAS), and second, they suggest a fully functioning web-app for early fire detection and fire monitoring using citizen science. This report outlines the materials and methods of these concepts, as well as future work necessary to bring the proposed technology into the field.

UAS data transfer ground stations↗

Wildland Fire Management Interim ConOps v1.0

This document outlines a concept of operations (ConOps) for a future state of wildland fire prevention, mitigation, and suppression offered as a recommendation and initial guidance for updating current methodologies, technologies, or standards to fit the growing scope of wildland fire. This document serves to collect and summarize the research and work of NASA and other U.S. federal agencies, partner groups, and private industry in envisioning ways, backed by expertise, that could bolster and increase support for firefighting personnel such that overall effectiveness, safety, and efficiency is drastically increased. This document will start with the background of the joint efforts and methods of research and collaboration, followed by a detailed discussion of the current state of wildland fire efforts. In contrast to the current state, the vision for the future state reveals specific areas of improvement with suggestions for potential emerging technologies. With such changes in mind, there is a brief discussion on the impacts of these changes from the systems, organizational, and procedural perspectives, as well as measures by which the effectiveness of this ConOps could be evaluated upon adoption. This is commenced with a general discussion on the various trade-offs considered and areas of improvements. Note, this is the first iteration of this document intended for initial peer review.

transportation↗

Future Pathways for Arctic Forest Fires

Wildfires are expected to become more common and more severe in the Arctic states due to climate change. Main cause for the fires is human activity, even in the boreal and Arctic forests. Therefore, activities such forest management and tourism, together with firefighting capacity and readiness, can have a significant impact on future wildfire risks and impacts. To assess the impacts of these factors we have created pathways for future wildfires up to 2050 for the Arctic states. We explore high and low fire activity and risk pathways for all the Arctic states and suggest most our best guess pathways for each state separately. The low activity and fire risk pathway assumes active fire suppression via population participation and official land management, efficient fuel treatments to reduce fire risk, and active firefighting. The high activity and fire risk pathway assumes the opposite due to lack of government and community response, with addition of lacking response to climate-driven changes to wildfire risks. In the Nordic countries, human ignition sources, such as timber extraction, tourism, summer cottages, and expanding wildland-urban intermix due to exurban growth may increase. In addition to these in Canada and Alaska, expansion of agriculture increases the likelihood of open burning of agricultural waste, increasing risk of the fire spreading to wildlands. Drier fuels due to climate change increase the risk of fires, and there is a growing risk of extreme heat conditions, creating favorable conditions for extreme wildfires from any ignition source. Throughout the Arctic lightning is expected to increase, increasing the risk of tundra (specifically grassland) fires, with potential to occur in hard-to-reach locations for firefighting. In short, policy actions and education play a crucial role in future wildfire management and adaptation.

Future↗

Communications System Concept of Operations (ConOp) for Supporting Second Shift (SS) Operations

Wildland fires take place most often in remote areas without access to communications infrastructure. Communication during wildfire operations is crucial for safe and effective command and control of air assets, ground-based firefighters, and fire management. Without connectivity, Incident Command (IC) cannot exchange information, receive alerts or work with all parties involved in the wildfire suppression operation. Current policy directs IC to use voice radio communications, which require no prior infrastructure, to provide information needed for the command, control and safety of personnel and resources. Cellular communications are used only for logistical purposes unless no other method is available. To address some of the shortcomings of the current state of communications, the Advanced Capabilities for Emergency Response Operations (ACERO) Second Shift (SS) technical team is developing characteristics of an air-to-ground Mesh Radio System (MRS) and preparing for a future demonstration. The MRS will allow air and ground assets to automatically join a radio network without relying on existing infrastructure and exchange information critical to maintaining situation awareness and air traffic management by the onsite IC. The MRS will also give users more options for communications in addition to voice communications.

David Fuller↗

Determining Optimal Asset Location for Rapid and Efficient Wildfire Suppression: A Simulation-Based Approach

The impact of wildfire incidents has been growing in recent years, posing a serious threat to communities at the urban-wildland interface. To address this problem, there have been growing calls to use UAVs to increase the capacity of responsible agencies to quickly and effectively suppress fires and to reduce risks associated with firefighting. One of the opportunities associated with UAVs is the ability to rapidly and autonomously operate from limited-access air bases where fires are expected to burn. This study provides an approach to determine where these air bases should be placed in order to most rapidly extinguish fires, given provided fuel distributions. This approach uses an integrated simulation of fire propagation and UAV-based suppression actions to determine how much of a given environment was burned over a range of scenarios. It then uses an optimization method to explore the space and determine the location with the least burned area. Results show the approach to efficiently and effectively provide optimal bases for single-base placements over a range of scenarios, though future work is required to adequately calibrate the model and study how it can be used in multiple-base placement problems.

Daniel Hulse↗

Determining Optimal Asset Location for Rapid and Efficient Wildfire Suppression: A Simulation-Based Approach

The impact of wildfire incidents has been growing in recent years, posing a serious threat to communities at the urban-wildland interface. To address this problem, there have been growing calls to use UAVs to increase the capacity of responsible agencies to quickly and effectively suppress fires and to reduce risks associated with firefighting. One of the opportunities associated with UAVs is the ability to rapidly and autonomously operate from limited-access air bases where fires are expected to burn. This study provides an approach to determine where these air bases should be placed in order to most rapidly extinguish fires, given provided fuel distributions. This approach uses an integrated simulation of fire propagation and UAV-based suppression actions to determine how much of a given environment was burned over a range of scenarios. It then uses an optimization method to explore the space and determine the location with the least burned area. Results show the approach to efficiently and effectively provide optimal bases for single-base placements over a range of scenarios, though future work is required to adequately calibrate the model and study how it can be used in multiple-base placement problems.

Daniel Hulse↗