Search NASA⌕ Search

SEARCH · Search NASA

Results for “wind veer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

The diurnal wind variation in the lowest 1500 ft in central Oklahoma - June 1966-May 1967.

A one-year accumulation of wind data from a television tower in northern Oklahoma City has been analyzed on a diurnal basis. The annual mean speeds below the third level at 296 ft are lowest at night and highest during the day, and conversely the speeds up to the seventh level at 1458 ft are lowest during the day and highest at night. Generally, speed changes occur in short time periods shortly after sunrise and near sunset. Resultant wind directions veer most with height from 1700 to 1000 CST and least during midday. At all levels winds veer with time between 2100 and approximately 1100 CST and then back with time during the remaining hours.

Crawford, K. C.↗

Characterization of wind speed and directional shear at the AWAKEN field campaign site

The American wake experiment (AWAKEN) is taking place in northern Oklahoma, USA, close to the Atmospheric Radiation Measurement Southern Great Plains (ARM SGP) atmospheric observatory. The planning for the deployment of the instruments in this observational field campaign required an assessment of the wind characteristics of the site. This paper analyzes long-term data collected by instruments at the ARM SGP observatory to characterize the winds near the AWAKEN site. The analysis shows that this site experiences high wind shear and veer events with a large number of nocturnal low-level jets. A total of 7086 low-level jet wind profiles over 6 years are examined and found to be dominant from the south and southeast. Significant nocturnal wind veer is observed, which causes southerly wind near the surface to become westerly wind aloft. By identifying a strong relationship between atmospheric stability and wind shear, the wind shear at the site is predicted using the Monin–Obukhov similarity theory (MOST) and validated with the observational data collected by a scanning Doppler lidar. The results show that wind speed at a height of 91 m, a proxy hub height for wind turbines in this area, can be predicted from data collected at a height of 10 m with a bias of −0.35 and 0.65 m s−1 in unstable and stable atmospheric boundary layers, respectively. The bias of the predicted wind speed is mostly in the region of low wind speed, and wind speed above 5 m s−1 at a height of 91 m can be predicted with a bias of less than 0.2 m s−1, and the limitations of the MOST in predicting winds during the stably stratified boundary layer is well-observed.

17 WIND ENERGY↗

A study of tornadic thunderstorm interactions with thermal boundaries

A study of tornadic thunderstorm interactions with thermal boundaries using a model of subcloud wind profiles is presented. Within a hot, moist, and conditionally unstable air mass, warm thermal advection and surface friction cause the winds to veer and increase with height, while within a cool, moist air mass cool thermal advection and friction combine to produce a wind profile that has maximum speeds near the surface and veers little with height. The spatial distribution of different wind profiles and moisture contents within the boundary layer may act together to maximize mesoscale moisture contents, convergence, and cyclonic vorticity within a narrow mixing zone along the thermal boundary.

Maddox, R. A.↗

A Twenty-Year Analysis of Winds in California for Offshore Wind Energy Production Using WRF v4.1.2

Offshore wind resource characterization in the United States relies heavily on simulated winds from numerical weather prediction (NWP) models, given the lack of hub-height observations offshore. One such NWP data set used extensively by U.S. stakeholders is the Wind Integration National Dataset (WIND) Toolkit, a 7-year time-series data set produced in 2013 by the National Renewable Energy Laboratory. In this study, we present an update to that data set for offshore California that leverages recent advancements in NWP modeling capabilities and extends the period of record to a full 20 years. The data set predicts a significantly larger wind resource (0.25–1.75 m s-1 stronger), including in three Call Areas that the Bureau of Ocean Energy Management is considering for commercial activity. We conduct a set of yearlong simulations to study factors that contribute to this increase in the modeled wind resource. The largest impact arises from a change in the planetary boundary layer parameterization from the Yonsei University scheme to the Mellor-Yamada-Nakanishi-Niino scheme and their diverging wind profiles under stable stratification. Additionally, we conduct a refined wind resource assessment at the three Call Areas, characterizing distributions of wind speed, shear, veer, stability, frequency of wind droughts, and power production. We find that, depending on the attribute, the new data set can show substantial disagreement with the WIND Toolkit, thereby driving important changes in predicted power.

49 EE - Wind and Water Power Program - Wind (EE-4W↗

SANDWake3D

SAND2026-23958O SANDWake3D models atmospheric surface layers and turbine wakes using a 3D parabolic RANS solver. This Python-based tool uses an efficient method to simulate wakes, capturing complex wake behaviors such as wind shear, veer, and atmospheric stratification, naturally. It has been calibrated and validated against higher-fidelity large eddy simulations (LES), providing reliable results for wind energy and atmospheric research applications. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

SciDAC↗

An Elevated Reservoir of Air Pollutants over the Mid-Atlantic States During the 2011 DISCOVER-AQ Campaign: Airborne Measurements and Numerical Simulations

During a classic heat wave with record high temperatures and poor air quality from July 18 to 23, 2011, an elevated reservoir of air pollutants was observed over and downwind of Baltimore, MD, with relatively clean conditions near the surface. Aircraft and ozonesonde measurements detected approximately 120 parts per billion by volume ozone at 800 meters altitude, but approximately 80 parts per billion by volume ozone near the surface. High concentrations of other pollutants were also observed around the ozone peak: approximately 300 parts per billion by volume CO at 1200 meters, approximately 2 parts per billion by volume NO2 at 800 meters, approximately 5 parts per billion by volume SO2 at 600 meters, and strong aerosol optical scattering (2 x 10 (sup 4) per meter) at 600 meters. These results suggest that the elevated reservoir is a mixture of automobile exhaust (high concentrations of O3, CO, and NO2) and power plant emissions (high SO2 and aerosols). Back trajectory calculations show a local stagnation event before the formation of this elevated reservoir. Forward trajectories suggest an influence on downwind air quality, supported by surface ozone observations on the next day over the downwind PA, NJ and NY area. Meteorological observations from aircraft and ozonesondes show a dramatic veering of wind direction from south to north within the lowest 5000 meters, implying that the development of the elevated reservoir was caused in part by the Chesapeake Bay breeze. Based on in situ observations, Community Air Quality Multi-scale Model (CMAQ) forecast simulations with 12 kilometers resolution overestimated surface ozone concentrations and failed to predict this elevated reservoir; however, CMAQ research simulations with 4 kilometers and 1.33 kilometers resolution more successfully reproduced this event. These results show that high resolution is essential for resolving coastal effects and predicting air quality for cities near major bodies of water such as Baltimore on the Chesapeake Bay and downwind areas in the Northeast.

ozone↗

Use of Dual-Polarization Radar Variables to Assess Low-Level Wind Shear in Severe Thunderstorm Near-storm Environments in the Tennessee Valley

The upgrade of the National Weather Service (NWS) network of S ]band dual-polarization radars is currently underway, and the incorporation of polarimetric information into the real ]time forecasting process will enhance the forecaster fs ability to assess thunderstorms and their near ]storm environments. Recent research has suggested that the combination of polarimetric variables differential reflectivity (ZDR) and specific differential phase (KDP) can be useful in the assessment of low level wind shear within a thunderstorm. In an environment with strong low ]level veering of the wind, ZDR values will be largest along the right inflow edge of the thunderstorm near a large gradient in horizontal reflectivity (indicative of large raindrops falling with a relative lack of smaller drops), and take the shape of an arc. Meanwhile, KDP values, which are proportional to liquid water content and indicative of a large number of smaller drops, are maximized deeper into the forward flank precipitation shield than the ZDR arc as the smaller drops are being advected further from the updraft core by the low level winds than the larger raindrops. Using findings from previous work, three severe weather events that occurred in North Alabama were examined in order to assess the utility of these signatures in determining the potential for tornadic activity. The first case is from October 26, 2010, where a large number of storms indicated tornadic potential from a standard reflectivity and velocity analysis but very few storms actually produced tornadoes. The second event is from February 28, 2011, where tornadic storms were present early on in the event, but as the day progressed, the tornado threat transitioned to a high wind threat. The third case is from April 27, 2011, where multiple rounds of tornadic storms ransacked the Tennessee Valley. This event provides a dataset including multiple modes of tornadic development, including QLCS and supercell structures. The overarching goal of examining these three events is to compare dual ]polarization features from this larger dataset to previous work and to determine if these signatures can be a useful indication of the potential for tornadic activity associated with the amount of low ]level wind shear in the near ]storm environment.

Crowe, Christina C.↗

Tropical Cyclone Super Resolution using conditional diffusion denoising probabilistic model from mesoscale simulation to LES

Accurate modeling of tropical cyclone wind fields is essential for the design, risk assessment, and operational planning of offshore energy infrastructure. While mesoscale simulations are widely used thanks to their computational efficiency, they lack the necessary resolution to capture key features such as wind shear and veer profiles as well as the distribution turbulent kinetic energy (TKE). High-fidelity large-eddy simulation (LES) models on the other hand, can resolve turbulent structures and provide a more accurate representation of the complex wind field, albeit at a higher computational cost. To address this modeling gap, we introduce a two-part generative framework to enhance the resolution and physics-capturing ability of mesoscale simulations. First, a reduced-order model based on Karhunen–Loève (KL) decomposition is used to extract dominant spatial modes from one-dimensional mean wind profiles. A multilayer perceptron (MLP) is trained to map mesoscale mode weights to their LES counterparts, enabling accurate reconstruction of vertical velocity profiles. Second, a conditional Diffusion Denoising Probabilistic Model (DDPM) is developed to super-resolve coarse and low-fidelity mesoscale velocity fields, recovering fine-scale turbulence structures and stress distributions. The framework is evaluated across different tropical cyclone intensity categories defined by the Saffir–Simpson scale and demonstrates strong performance in both interpolation and extrapolation tasks. The generated fields accurately reproduce spatial coherence, stress distributions, and spectral energy characteristics observed in LES data. By bridging the fidelity gap between mesoscale and LES outputs, this approach offers a scalable, data-driven solution for enhancing the representation of tropical cyclone wind fields, enabling more robust offshore energy infrastructure systems design in tropical-cyclone-prone areas.

17 WIND ENERGY↗

Case study of Pampa, Texas, multicell storms

Analysis of the Pampa, TX, multicell storms showed prestorm environmental conditions of a strong horizontal convergence of moisture, mixing ratio 12 g/kg at the 850 mb level in the Texas Panhandle areas and strong winds with shear veering with height. Rapid-scan satellite imagery showed that the clouds penetrated above the tropopause and cloud-top temperatures were at least 4 to 9 C colder than the temperature of the tropopause. This formation and collapsing of high-mass-density overshooting cloud tops above the tropopause is characteristic of tornadoes in the middle portion of the United States.

Hung, R. J.↗

Impacts of wind field characteristics and non-steady deterministic wind events on time-varying main-bearing loads

Abstract. This work considers the characteristics and drivers of the loads experienced by wind turbine main bearings. Simplified load response models of two different hub and main-bearing configurations are presented, representative of both inverting direct-drive and four-point-mounted geared drivetrains. The influences of deterministic wind field characteristics, such as wind speed, shear, yaw offset, and veer, on the bearing load patterns are then investigated for similarity scaled 5, 7.5, and 10 MW reference wind turbine models. Main-bearing load response in cases of deterministic gusts and extreme changes in wind direction are also considered for the 5 MW model. Perhaps surprisingly, veer is identified as an important driver of main-bearing load fluctuations. Upscaling results indicate that similar behaviour holds as turbines become larger, but with mean loads and load fluctuation levels increasing at least cubically with the turbine rotor radius. Strong links between turbine control and main-bearing load response are also observed.

17 WIND ENERGY↗

Grand Challenges in the Science of Making Torque from Wind: Then and Now

Shifting the electricity supply to renewable sources within the next two decades is the first step in decarbonizing the energy sector, and wind energy will play a central role in enabling this rapid energy transition to clean energy. The international wind energy research community - including NREL researchers - has determined that for wind power to fulfill its expected role as a major global supplier of carbon-free energy, critical challenges around the design, development, and deployment of wind energy must be addressed - quickly. Paul Veers and other NREL researchers joined 100 worldwide wind energy experts in writing a series of 10 articles for publication in Wind Energy Science. With the support and guidance of the European Academy of Wind Energy Publications Committee, the articles synthesize and clarify the most critical wind energy science needs. This presentation introduces the concept of the Grand Challenges and its 10 articles.

decarbonization↗

Editorial for the Collection "Preparatory Work for the American Wake Experiment (AWAKEN)"

The American WAKE experimeNt (AWAKEN) is a large field campaign focused on gathering observations for improved understanding of atmospheric and wind power plant flow physics, one of the outstanding needs for the wind energy community as described in the Science paper by Veers et al.1 "Grand challenges in wind energy." AWAKEN was planned over several years with an international consortium of numerous stakeholders, including national laboratories, academic researchers, wind turbine manufacturers, and wind farm operators. A highlight of the AWAKEN campaign is the extensive use of remote sensing instrumentation to characterize the atmosphere and its interactions with wind power plants, enabled by recent developments in lidar, radar, and thermodynamic profiling technology. Advanced modeling techniques like mesoscale and large-eddy simulations (LES) also played an important role in the preparation of the experiment and the interpretation of the experimental data collected. This special-topic issue for the Journal of Renewable and Sustainable Energy presents a collection of 12 papers that describe the preparatory work and some initial analyses from the AWAKEN campaign. An overview of the contents of the various papers in this special issue is provided in Sec. II.

17 WIND ENERGY↗

Wind Fields in Category 1–3 Tropical Cyclones Are Not Fully Represented in Wind Turbine Design Standards

Abstract Offshore wind energy deployment in the U.S. is expected to increase in the years to come, with proposed wind farm sites located in regions with high risk for tropical cyclones. Yet, the wind turbine design criteria outlined by the International Electrotechnical Commission for extreme events may not account for wind field characteristics unique to tropical cyclones. To evaluate if current design standards capture the extreme conditions of these storms, we perform idealized large‐eddy simulations of three tropical cyclones (one Category 1, one Category 2, and one Category 3 storms) using the Weather Research and Forecasting model. Wind conditions near the eyewall of Cat‐1, Cat‐2, and Cat‐3 storms can exceed current design standards for offshore wind turbines. Winds at 90 m can be faster than outlined in the design criteria for Class I and Class T turbines for 50‐year recurrence periods. Wind speed shear across the turbine rotor layer is also larger than assumed in design specifications. Moreover, vertical variations in wind direction across the turbine rotor layer are large for tropical cyclones of all intensity levels, suggesting design standards should include veer, which can amplify loads in wind turbines. The existence of hurricane wind field characteristics that are not represented in design standards does not imply that damage or failure will certainly occur. Engineering safety factors incorporated in the design of the turbine's blades and structural components may prevent damage from occurring.

17 WIND ENERGY↗

The Wind Turbine Rotors of the Future: A Research Agenda from the Big Adaptive Rotor Project

This white paper outlines a roadmap to inform future research efforts around the wind turbine rotors of the future. The document is authored by researchers that have been working on the Big Adaptive Rotor (BAR) and related initiatives at the National Renewable Energy Laboratory and Sandia National Laboratories. The Wind Energy Technologies Office of the U.S. Department of Energy has been funding BAR since 2018. The learnings from BAR have been documented in dozens of publications. This new paper identifies unresolved critical challenges in wind turbine rotor technology and structures them in four large topic areas: 1. Predictive and validated numerical tools. 2. Design methods and standards. 3. Improvements in manufacturing. 4. Technological innovations. Although wind turbines have not changed in their core architecture, with the market almost entirely dominated by three-bladed upwind rotors, a vast amount of research has allowed to introduce technological innovations resulting in a reduction in levelized cost of energy that made wind competitive with all traditional sources of electricity. Focusing on the rotor, blades will keep following the trend of mass and stiffness reduction, will adopt segmentation, and will keep growing in length, both land-based and offshore. To support this continuous innovation, this white paper argues that research efforts in rotor technology at the national labs are best directed to the first three topic areas and to low technology-readiness-levels (1-3) innovations, leaving the task of implementing higher-TRL (4-9) technological innovations to industry stakeholders. This research roadmap is also well aligned with the upcoming roadmap defined during the International Energy Agency 109th Topical Expert Meeting on the Grand Challenges of Wind Energy.

17 WIND ENERGY↗

Regime Characterization of Offshore Wind Resource Using Unsupervised Learning

Predictability of wind resource conditions is critical for offshore wind design and operations. While many studies of extreme wind conditions focus on specific events such as low-level jets or ramps, these rely on threshold definitions that limit generality. Here we present a data-driven framework that combines principal component analysis (PCA), self-organizing maps (SOM), and k-means clustering to classify wind resource conditions as typical and anomalous from climatological data. Anomalies are defined not by fixed thresholds but by flagging samples located far from SOM node centers inside the baseline SOM structure. This reframes extremes as rare ebents and hence, likely difficult to anticipate by numerical weather prediction models. We applied this approach to 23 years (2000–2022) of hourly profiles from the NOW-23 hindcast model at the Humboldt Wind Energy Area. Classification is conducted on a feature space consisting of 10 m wind speed and direction, bulk shear and veer across 30–270 m, and a low-level jet index. Dimensionality reduction is achieved through PC. A 2 × 3 OM lattice trained on the PCA vectors identified six baseline regimes spanning weak to strong flow states. High quantization-error profiles are identified and re-clustered into four anomalous regimes. The baseline regimes exhibited clear seasonal and diurnal cycles. Meanwhile, the anomalous regimes represented <10 % of all hours but showed distinct combinations of speed, shear, and veer, when compared to the baseline regimes. Anomalous regimes are typically short-lived (~few hours), yet their transitions can lead to hub-height wind changes of −18 to +9 m s -1 . For a representative 15 MW turbine, these shifts imply rapid swings in capacity factor from near-full output to negligible generation. Validation with lidar buoy data showed 51% agreement in SOM labels across ~6,000 overlapping hours, with most mismatches confined to adjacent speed classes. HRRR comparisons further revealed that anomalous regimes were disproportionately associated with forecast biases exceeding 5 m s -1 . Together, these results reframe extremes in offshore wind from absolute maxima or minima to weather states that are difficult to anticipate from models.

17 WIND ENERGY↗

Effects of finite sampling on fatigue damage estimation of wind turbine components: A statistical study

The variability of the wind turbine loads complicates fatigue assessment in the design phase, as performing simulations covering the entire lifetime is computationally expensive. The current work provides important information for assessing the uncertainty in fatigue damage estimation due to finite data. Here we study the sample size effect on mean, variance, and skewness of damage in each wind bin, identify the important wind bins, and study the uncertainty propagation from each wind bin to the lifetime damage using 3600 aeroelastic simulations and bootstrapping. To achieve less than 1% error in the damage estimation across all load channels in the current case study, at least 100 turbulence seeds are needed. Damage in different wind bins follows a lognormal distribution when using the conventional approach of six seeds. The provided insights and information allow the designer to achieve a specific level of accuracy for a given computational cost using strategic bin sampling.

17 WIND ENERGY↗

Extreme Helicity and Intense Convective Towers in Hurricane Bonnie

Helicity was calculated in Hurricane Bonnie (1998) using tropospheric-deep dropsonde soundings from the NASA Convection and Moisture Experiment. Large helicity existed downshear of the storm center with respect to the ambient vertical wind shear. It was associated with veering, semicircular hodographs created by strong, vortex-scale, radial-vertical flow induced by the shear. The most extreme values of helicity, among the largest ever reported in the literature, occurred in the vicinity of deep convective cells in the downshear-left quadrant. These cells reached as high as 17.5 km and displayed the temporal and spatial scales of supercells. Convective available potential energy (CAPE) averaged 861 J/kg downshear, but only about one-third as large upshear. The soundings nearest the deep cells were evaluated using two empirical supercell parameters that make use of CAPE, helicity, and/or shear. These parameters supported the possible existence of supercells as a consequence of the exceptional helicity combined with moderate but sufficient CAPE. Ambient vertical wind shear exceeded 12 m/s for 30 h, yet the hurricane maintained 50 m/s maximum winds. It is hypothesized that the long-lived convective cells enabled the storm to resist the negative impact of the shear. Supercells in large-helicity, curved-hodograph environments appear to provide a useful conceptual model for intense convection in the hurricane core. Helicity calculations might also give some insight into the behavior of vortical hot towers, which share some characteristics with supercells.

Molinari, John↗