Search NASA⌕ Search

SEARCH · Search NASA

Results for “wind velocity radar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Radar - ANL Wind Profiler, Walla Walla - Raw Data

**Winds** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature** To measure atmospheric temperature, a radio acoustic sound system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60-m up to 3.5k m for the 449 MHz.

17 WIND ENERGY↗
DOE OSTI2021

Radar - ANL Wind Profiler with RASS, Goldendale - Raw Data

**Winds** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature** To measure atmospheric temperature, a radio acoustic sound system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60-m up to 3.5k m for the 449 MHz.

17 WIND ENERGY↗
DOE OSTI2021

Radar - ESRL Wind Profiler with RASS, Prineville - Raw Data

**Winds** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature** To measure atmospheric temperature, a radio acoustic sound system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60-m up to 3.5k m for the 449 MHz.

17 WIND ENERGY↗
DOE OSTI2021

Radar - ESRL Wind Profiler with RASS, Wasco Airport - Raw Data

**Winds** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature** To measure atmospheric temperature, a radio acoustic sound system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60-m up to 3.5k m for the 449 MHz.

17 WIND ENERGY↗
DOE OSTI2021

Radar - ESRL Wind Profiler with RASS, Troutdale - Raw Data

**Winds** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature** To measure atmospheric temperature, a radio acoustic sound system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60-m up to 3.5k m for the 449 MHz.

17 WIND ENERGY↗
DOE OSTI2021

Radar - ESRL Wind Profiler with RASS, Condon - Raw Data

**Winds** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature** To measure atmospheric temperature, a radio acoustic sound system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60-m up to 3.5k m for the 449 MHz.

17 WIND ENERGY↗
DOE OSTI2021

Radar - ARL Wind Profilerwith RASS, Boardman - Raw Data

**Winds** A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and combined to derive the horizontal wind field over the radar. These data typically are sampled and averaged hourly and usually have 6-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz and 8 km for the 449 MHz systems. **Temperature** To measure atmospheric temperature, a radio acoustic sound system (RASS) is used in conjunction with the wind profile. These data typically are sampled and averaged for five minutes each hour and have a 60-m vertical resolution up to 1.5 km for the 915 MHz and 60-m up to 3.5k m for the 449 MHz.

17 WIND ENERGY↗
DOE OSTI2025

BLOC Site - Radar Wind Profiler / Derived Data Reformatted

A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and combined to derive the horizontal wind field over the radar. These data are typically sampled and averaged hourly or sub-hourly (15-min) and usually have 60-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz system. Both a high-resolution, lower height coverage mode and a low-resolution, higher height coverage mode are used to collect the data.

17 WIND ENERGY↗
DOE OSTI2025

NANT Site - Radar Wind Profiler / Derived Data Reformatted

A radar wind profiler measures the Doppler shift of electromagnetic energy scattered back from atmospheric turbulence and hydrometeors along 3-5 vertical and off-vertical point beam directions. Back-scattered signal strength and radial-component velocities are remotely sensed along all beam directions and combined to derive the horizontal wind field over the radar. These data are typically sampled and averaged hourly or sub-hourly (15-min) and usually have 60-m and/or 100-m vertical resolutions up to 4 km for the 915 MHz system. Both a high-resolution, lower height coverage mode and a low-resolution, higher height coverage mode are used to collect the data.

17 WIND ENERGY↗
DOE OSTI2026

Wind and Temperature Consensus at Horn Point, HU-Beltsville, Piney Run (Maryland) in support of CoURAGE

The Maryland Department of the Environment (MDE) operates a ground-based atmospheric profiling network consisting of collocated radar wind profilers (RWP) and radio acoustic sounding systems (RASS) as part of its Ambient Air Monitoring Program. This network provides continuous observations of wind and temperature structure in the lower troposphere to support air quality forecasting, regulatory analysis, and atmospheric research. The network currently includes three fixed sites across Maryland: Horn Point (HP, lower eastern shore) [38.587525°,-76.141006°], Howard University-Beltsville (HUB, central Maryland) [39.055277°, -76.878632°], and Piney Run (PR, western Maryland) [39.705950°, -79.012000°] The network is designed to capture regional variability in atmospheric transport and boundary-layer processes. These systems measure vertical profiles of horizontal wind speed and direction using Doppler radar techniques, with observations typically spanning from ~100 m above ground level up to approximately 2.5–4 km. Measurements are derived from the Doppler shift of backscattered electromagnetic signals, enabling retrieval of wind vectors at multiple altitudes with high temporal resolution (e.g., 30-minute averages reported every 6 minutes). Each radar wind profiler is paired with a Radio Acoustic Sounding System (RASS) to provide profiles of virtual temperature in the lower atmosphere (~100–200 m AGL) by measuring the propagation speed of acoustic waves. Together, the RWP/RASS system yields a coupled data set of thermodynamic and kinematic atmospheric structure, including additional parameters such as vertical velocity, radial velocity, signal-to-noise ratio, and spectral width for advanced analysis. There are two types of files for each station: wind data (files with a "w" prefix) and virtual temperature RASS data (files with a "t" prefix). The wind data files are in the format wYYDDD.cns, where YY is the 2-digit year and DDD is the day of the year. The RASS virtual temperature data files are in the format tYYDDD.cns. Each record has the following header structure: Line 1 : Station Name RASS files Line 2 : RASS rev DeTect_2.0, WINDS files Line 2 : WINDS rev ATI 5.1 Line 3 : N latitude, W longitude, and site elevation (m) Line 4 : Date and begin time of consensus: yy mm dd hh mn ss plus # minutes to add to get UTC Line 5 : Consensus averaging time (minutes); number of beams; number of range gates Line 6 : Number of records required to make consensus (num) total number of records (tot) and the consensus window size (m/s) in the format: num:tot (window) RASS files Line 7 : no. of coded cells, no. of spec, pulse width (ns), and inter-pulse period (µs), WINDS files Line 7 : No. of coded cells, no. of spectra, pulse width (ns), and inter-pulse period (µs), each with a pair of values: first value is for oblique beams, second for vertical RASS files Line 8 : Full scale Doppler value (m/s) Delay to first gate (ns) Number of gates Spacing of gates (ns), WINDS files Line 8 : Full scale Doppler velocity (m/s), oblique and vertical Vertical correction applied to oblique beams? (0 = no, 1 = yes) Delay to first gate (ns), oblique and vertical Number of gates, oblique and vertical Spacing of gates (ns), oblique and vertical Line 9 : Azimuth and elevation (9s indicate vertical beam not used) RASS files Line 10, values : HT = Height above ground (km), T = Uncorrected virtual temperature consensus (deg C), Tc = Corrected virtual temperature consensus (deg C), W = Vertical wind consensus (9s indicate vertical beam not used, w-component, positive upward, m/s), CNT = Number of records that made consensus (for the 3 values in same order), SNR = Average signal to noise ratio (dB) of records in consensus (same order) WINDS files Line 10, values : HT = Height above ground (km), SPD = Wind speed (m/s), DIR = Wind direction (deg E of N from N), RAD = Radial velocities for each beam (m/s) in order given in azimuth and elevation line (positive toward radar; 9s indicate vertical beam not used, CNT = Number of records that made consensus, SNR = Average signal to noise ratio (dB) of records in consensus

{"wind speed and direction",temperature}↗
DOE OSTI2021

Radar - ESRL Wind Profiler with RASS, Wasco Airport - Derived Data

Profiles of turbulence dissipation rate for 15-minute intervals, time-stamped at the beginning of the 15-minute period, during the final 30 minutes of each hour. During that time, the 915-MHz wind profiling radar was in an optimized configuration with a vertically pointing beam only for measuring accurate spectral widths of vertical velocity. A bias-corrected dissipation rate also was profiled (described in McCaffrey et al. 2017). Hourly files contain two 15-minute profiles.

17 WIND ENERGY↗
DOE OSTI2022

Mesoscale evaluation of AMPS using AWARE radar observations of a wind and precipitation event over the Ross Island region of Antarctica

Surface, upper-air, and radar observations are used to assess the performance of the Antarctic Mesoscale Prediction System (AMPS) in simulating the mesoscale aspects of a wind and precipitation event over the Ross Island region of Antarctica that spanned January 16–20, 2016. The observations, collected during the Atmospheric Radiation Measurement (ARM) West Antarctic Radiation Experiment (AWARE), provide a unique dataset for evaluating AMPS, especially the radar observations that facilitate a three-dimensional depiction of winds and precipitation. Comparisons of AMPS forecast data with surface meteorology, balloon-sounding, and profiling radar observations at and above sites near McMurdo Station reveal a mixture of similarities and differences. A generally southerly flow is evident at low levels in both the AMPS simulations and observed Doppler radial velocities. AMPS winds are comparable to those observed at the surface and aloft in terms of magnitude, direction, and timing but the strongest simulated southerly flow is displaced eastward relative to the observations. AMPS-simulated reflectivity over the broader Ross Island region is more limited in areal extent and smaller in magnitude than observed by a scanning Doppler radar. Three episodes of surface precipitation are observed near McMurdo Station over the five-day event with peak rates of ~3 mm h -1 and a total accumulation of ~22 mm. However, AMPS produces no surface precipitation at that location over the five-day event due to a low-level dry bias in the forecasts. Herein, the results show the first observationally based three-dimensional understanding of meteorology in the Ross Island region.

AMPS↗
DOE OSTI2026

RHOD Site - NOAA PSL Wind Retrievals WINDoe / Derived Data

This dataset contains daily NetCDF files with horizontal wind profiles retrieved with the WINDoe retrieval (Gebauer and Bell 2024) at Rhode Island (RHOD). WINDoe retrievals datasets are also available at Nantucket Island (NANT, nant.windoe.z01.c1) and Block Island (BLOC, bloc.windoe.z01.c1). WINDoe is an optimal estimation algorithm to retrieve wind profiles combining multiple instruments. The code is available in this github repository (https://github.com/OAR-atmospheric-observations/WINDoe/tree/main) and the retrieval is described by Gebauer and Bell (2024). WINDoe allows combining the individual datasets and outputs into one profile taking into account the information and uncertainties of each dataset. The use of WINDoe minimizes data gaps and maximizes data availability, compared to using wind profiles from only one of the instruments. The regular height grid eases comparisons to numerical weather prediction models. Code modifications have been made that include reading in WFIP3 specific instruments, averaging Doppler lidar radial velocities at various azimuth angles to avoid overfitting, and allowing the user to define a height grid by the user in the vipfile. The instruments used as input to the retrieval are a radar wind profiler (low- and high resolution mode) providing data in and above the boundary layer, a scanning Doppler lidar usually providing data throughout the boundary layer, a profiling lidar providing data from 50 to 200 m at BLOC and NANT, and from 10 to 280 m at Rhode Island, and a surface tower (4 m at NANT and RHOD and 10 m at BLOC). From the scanning lidars, we used radial velocity measurements at 60 deg elevation angle at six different azimuth angles with a resolution of approximately 30 m along the line of sight and the lowest range gate at approximately 70 m. The wind profiles are retrieved with WINDoe up to 3.74 km with 10 m vertical resolution. The profiles are retrieved every 15 min at BLOC and NANT and every 60 min at RHOD.

17 WIND ENERGY↗
DOE OSTI2026

BLOC Site - NOAA PSL Wind Retrievals WINDoe / Derived Data

This dataset contains daily netcdf files with horizontal wind profiles retrieved with the WINDoe retrieval (Gebauer and Bell 2024) at Block Island (BLOC). WINDoe retrievals datasets are also available at Nantucket Island (NANT, nant.windoe.z01.c1) and Rhode Island (RHOD, rhod.windoe.z01.c1). WINDoe is an optimal estimation algorithm to retrieve wind profiles combining multiple instruments. The code is available in this github repository (https://github.com/OAR-atmospheric-observations/WINDoe/tree/main), and the retrieval is described by Gebauer and Bell (2024). WINDoe allows combining the individual datasets and outputs into one profile taking into account the information and uncertainties of each dataset. The use of WINDoe minimizes data gaps and maximizes data availability, compared to using wind profiles from only one of the instruments. The regular height grid eases comparisons to numerical weather prediction models. Code modifications have been made that include reading in WFIP3 specific instruments, averaging Doppler lidar radial velocities at various azimuth angles to avoid overfitting, and allowing the user to define a height grid by the user in the vipfile. The instruments used as input to the retrieval are a radar wind profiler (low- and high resolution mode) providing data in and above the boundary layer, a scanning Doppler lidar usually providing data throughout the boundary layer, a profiling lidar providing data from 50 to 200 m at BLOC and NANT, and from 10 to 280 m at Rhode Island, and a surface tower (4 m at NANT and RHOD and 10 m at BLOC). From the scanning lidars, we used radial velocity measurements at 60 deg elevation angle at six different azimuth angles with a resolution of approximately 30 m along the line of sight and the lowest range gate at approximately 70 m. The wind profiles are retrieved with WINDoe up to 3.74 km with 10 m vertical resolution. The profiles are retrieved every 15 min at BLOC and NANT and every 60 min at RHOD.

17 WIND ENERGY↗
DOE OSTI2026

NANT Site - NOAA PSL Wind Retrievals WINDoe / Derived Data

This dataset contains daily NetCDF files with horizontal wind profiles retrieved with the WINDoe retrieval (Gebauer and Bell 2024) at Nantucket Island (NANT). WINDoe retrievals datasets are also available at Block Island (BLOC, bloc.windoe.z01.c1) and Rhode Island (RHOD, rhod.windoe.z01.c1). WINDoe is an optimal estimation algorithm to retrieve wind profiles combining multiple instruments. The code is available in this github repository (https://github.com/OAR-atmospheric-observations/WINDoe/tree/main), and the retrieval is described by Gebauer and Bell (2024). WINDoe allows combining the individual datasets and outputs into one profile taking into account the information and uncertainties of each dataset. The use of WINDoe minimizes data gaps and maximizes data availability, compared to using wind profiles from only one of the instruments. The regular height grid eases comparisons to numerical weather prediction models. Code modifications have been made that include reading in WFIP3 specific instruments, averaging Doppler lidar radial velocities at various azimuth angles to avoid overfitting, and allowing the user to define a height grid by the user in the vipfile. The instruments used as input to the retrieval are a radar wind profiler (low- and high resolution mode) providing data in and above the boundary layer, a scanning Doppler lidar usually providing data throughout the boundary layer, a profiling lidar providing data from 50 to 200 m at BLOC and NANT, and from 10 to 280 m at Rhode Island, and a surface tower (4 m at NANT and RHOD and 10 m at BLOC). From the scanning lidars, we used radial velocity measurements at 60 deg elevation angle at six different azimuth angles with a resolution of approximately 30 m along the line of sight and the lowest range gate at approximately 70 m. The wind profiles are retrieved with WINDoe up to 3.74 km with 10 m vertical resolution. The profiles are retrieved every 15 min at BLOC and NANT and every 60 min at RHOD.

17 WIND ENERGY↗
DOE OSTI2026

WINDPROF: Merged Best-Estimate Wind Profile Data – Block Island (WFIP3 Campaign)

WINDPROF provides 10-minute wind and turbulence profiles, integrating Doppler lidars, wind profiling radars, and sonic anemometers across Northeast U.S. coastal/offshore sites during the WFIP3 campaign. Key data include wind speed, direction, vertical velocity, and turbulence parameters, with standardized quality control (e.g., instrument-specific thresholds and inter-instrument validation). Profiles are interpolated to a height grid (20 m spacing below 100 m; 30 m above) and include comprehensive uncertainty estimates. The Block Island dataset covers February 2024–September 2025, offering reproducible methods for atmospheric research, model validation, and wind energy studies.

17 WIND ENERGY↗
DOE OSTI2026

WINDPROF: Merged Best-Estimate Wind Profile Data – Nantucket (WFIP3 Campaign)

WINDPROF provides 10-minute wind and turbulence profiles, integrating Doppler lidars, wind profiling radars, and sonic anemometers across Northeast U.S. coastal/offshore sites during the WFIP3 campaign. Key data include wind speed, direction, vertical velocity, and turbulence parameters, with standardized quality control (e.g., instrument-specific thresholds and inter-instrument validation). Profiles are interpolated to a height grid (20 m spacing below 100 m; 30 m above) and include comprehensive uncertainty estimates. The Nantucket dataset covers February 2024–September 2025, offering reproducible methods for atmospheric research, model validation, and wind energy studies.

17 WIND ENERGY↗