SEARCH · Search NASA

Results for “zero modes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Vibration and local instability of thermally stressed plates

The vibration and buckling of a double wedge square cantilever plate has been investigated. It is shown that the free vibration modes, which occur at Delta T ref = 0, transition into the buckled modes which occur at Delta T ref = Delta T ref-cr for the respective mode. Delta T ref-cr for a particular mode is defined as the magnitude of thermal load at which the frequency of the particular mode vanishes. The analysis yields the same number of buckling eigenvalues and buckling modes as there are vibration eigenvalues and vibration modes. Gradual application of the load in the analysis permits the change in each vibration frequency of interest and its associated mode to be followed up to the load at which the frequency of the mode becomes zero. This constitutes the limit of linear theory. As the load is increased, the thin edges of the plate begin to deform during vibration. This local deformation, which begins in the vibration mode, is shown to transition into the phenomena of local edge buckling at Delta T ref-cr for the mode.

Bailey, C. D.↗

NASA NTRS1993

Dynamics of hypersonic flight vehicles exhibiting significant aeroelastic and aeropropulsive interactions

With analytic expressions previously developed for the forces and moments acting on a generic hypersonic vehicle, it is of interest to investigate the relative importance of the aerodynamic and propulsive effects on the vehicle dynamics. It is shown that the vehicle's aerodynamics and propulsive forces are both very significant in the evaluation of key stability derivatives which dictate the vehicle's dynamic characteristics. It is also shown that the vehicle model selected is unstable in pitch and exhibits strong airframe/engine/elastic coupling. With the use of literal expressions for both the systems poles and zeros, as well as the stability derivatives, key vehicle dynamic characteristics are investigated. For small errors, or uncertainties, in either the aerodynamic or propulsive forces, significant errors in the frequency and damping of the dominant modes and zero locations will arise.

Chavez, Frank R.↗

NASA NTRS1970

A new solid-state logarithmic radiometer

Combination of temperature-compensated logarithmic amplifiers and p-i-n photodiodes operating in zero-bias mode provides lightweight radiometer for detecting spectral intensities encompassing more than three decades over a range of at least 300 to 800 nanometers at low power levels.

Burrous, C. N.↗

NASA NTRS1969

Laboratory plasma wave experiments

Plasma wave theory and experiments, emphasizing stable Maxwellian plasmas and transverse and longitudinal wave modes in zero and nonzero magnetic fields

Crawford, F. W.↗

NASA NTRS1972

Uneven drive rates of the scanning telescope: Apollo 16 mission

An investigation was made into the cause or causes of uneven drive rates during operation of the Apollo 16 scanning telescope. It was suggested that such erratic behavior was caused by either changes in the characteristics noise level of the optics counter on the panels or the repositioning process by the computer or zero optics mode. Test results show the anomaly was not caused by either of the above suggestions, instead they were caused by a broken socket spring in the telescope harness. New harnesses will be manufactured for future flights.

Source record↗

NASA NTRS1977

Tube method of sound-absorption measurement extended to frequencies far above cutoff

Equipment had been constructed for measuring sound absorption in the frequency range from 4 to 100 kHz in a large tube 25.4 cm in diameter and 4.8-m long. The technique employs a large moveable solid-dielectric capacitance transducer that completely fills the tube cross section and generates pulses of plane waves. An identical transducer terminates the other end of the tube and serves as a microphone to detect and reflect the sound pulses. Measurements in argon, nitrogen, and air indicate that the attenuation of the sound pulses differs by less than 1% from values calculated for the zero-order mode for frequencies up to 44 times the cutoff frequency for the first 'nonplane' mode. Above that frequency, the measured values are less than those predicted by theory by an amount that is approximately proportional to the wavelength to the -3.1 power. In a smaller tube of similar construction, the high-frequency deviation from theory is absent.

Shields, F. D.↗

NASA NTRS1977

Far-field multimodal acoustic radiation directivity

Approximate equations for the far field acoustic radiation patterns in the forward quadrant from a flanged circular duct were compared with exact equations for both single and multimodal excitations. The single mode comparison showed good agreement between the exact and approximate equations for the principal lobes of higher radial order modes. For lower and especially for zero radial order modes, there was some error in the angular location and decibel level of principal lobe peak pressure obtained from the approximate equation. Some agreement of sidelobes was also observed although the approximate equation was not intended to simulate the sidelobes. The multimodal approximate summation equations consisting only of a simple function of directivity angle and an acoustic power biasing function were checked against the exact equations for several distributions of modal power and showed excellent agreement with exact equations for all cases. Although many modes contribute to the final level and shape of the directivity curve, the major contributions appear to come from the higher radial order modes.

Saule, A. V.↗

NASA NTRS1982

A nonlocal theory of an electrostatic sinusoidal density drift instability

The stability of space plasmas in which the macroscopic variables vary in the direction x perpendicular to the magnetic field is usually studied by means of the local approximation, in which the fluctuating potential is assumed to be independent of x. To remove this approximation, a nonlocal problem is studied in which the background density, and hence the fluctuating potentials, are periodic in x. From the linear Vlasov/Poisson equations, a set of coupled, linear, homogeneous, algebraic equations relating the Fourier amplitudes of the eigensolution is derived. The equations are solved numerically and a hierarchy of exact eigenmodes characterized by different growth rates and spatial structures is found. At points where the density gradient is locally zero, the mode amplitude is generally several orders of magnitude lower than the peak amplitude. The dependence of these solutions on the parameters which define the background density perturbation is studied and a correspondence between these nonlocal results and those obtained with the local approximation is demonstrated.

Thomsen, M. F.↗

NASA NTRS1986

Radiation of plasma waves by a conducting body moving through a magnetized plasma

A theory is presented describing energy loss due to radiation of plasma waves by a conducting body moving through a magnetized plasma, which makes it possible to estimate the total power radiated at all frequencies. Using energy conservation and a source current deduced by physical reasoning, numerical predictions were made for the power radiated. It was found that radiation is produced at all frequencies for which one of the plasma modes has zero phase velocity in some direction.

Barnett, Alan↗

NASA NTRS1987

Developing disturbances in shear

The origin and growth to moderate amplitude of disturbances in shear flow has been traditionally ascribed to the linear modal instability of the flow. Recent work on initial value problems has suggested that nonmodal growth of perturbations may be of equal and perhaps greater importance, at least in cases of rapid development. Examples of robust growth in model problems which support no instabilities and in baroclinic flows with realistic Ekman damping for which the exponential modes have zero or negative growth rates have been shown. Such examples have focused attention on the perturbations which are configured to tap the energy of mean flows. Here a critical examination of these favorably configured perturbations is given, making use of the simple constant free shear barotropic model which allows construction of exact two-dimensional isolated wave packet solutions.

Farrell, Brian↗

NASA NTRS1992

An assessment of four-noded plate finite elements based on a generalized third-order theory

Plate finite elements based on the generalized third-order theory of Reddy and the first-order shear deformation theory are analyzed and compared on the basis of thick and thin plate modeling behavior, distortion sensitivity, overall accuracy, reliability, and efficiency. In particular, several four-noded Reddy-type elements and the nine-noded Lagrangian and heterosis (Mindlin-type) plate elements are analyzed to assess their behavior in bending, vibration, and stability of isotropic and laminated composite plates. A four-noded Reddy-type element is identified which is free of all spurious stiffness and zero energy modes, computationally efficient, and suitable for use in any general-purpose finite element program.

Averill, R. C.↗

NASA NTRS1992

Pulsatile instability in rapid directional solidification: Strongly-nonlinear analysis

In models of rapid directional solidification, non-equilibrium interfacial conditions are employed. As a result, there is an oscillatory mode of instability, as well as the steady cellular mode, found in the equilibrium model of Mullins and Sekerka. When the temperature field is decoupled from the problem, the preferred wave number for the oscillatory mode is zero, and the interface pulsates in time while remaining spatially uniform. Results from multiple scale analyses in the two limiting cases of the parameters are reported. In these limits, it is found that the instability is a bifurcation to relaxation oscillations; these nonlinear oscillations may be related to the observed microstructure that results from rapid solidification processes such as laser surface remelting.

Braun, Richard J.↗

NASA NTRS1996

Element Library for Three-Dimensional Stress Analysis by the Integrated Force Method

The Integrated Force Method, a recently developed method for analyzing structures, is extended in this paper to three-dimensional structural analysis. First, a general formulation is developed to generate the stress interpolation matrix in terms of complete polynomials of the required order. The formulation is based on definitions of the stress tensor components in term of stress functions. The stress functions are written as complete polynomials and substituted into expressions for stress components. Then elimination of the dependent coefficients leaves the stress components expressed as complete polynomials whose coefficients are defined as generalized independent forces. Such derived components of the stress tensor identically satisfy homogenous Navier equations of equilibrium. The resulting element matrices are invariant with respect to coordinate transformation and are free of spurious zero-energy modes. The formulation provides a rational way to calculate the exact number of independent forces necessary to arrive at an approximation of the required order for complete polynomials. The influence of reducing the number of independent forces on the accuracy of the response is also analyzed. The stress fields derived are used to develop a comprehensive finite element library for three-dimensional structural analysis by the Integrated Force Method. Both tetrahedral- and hexahedral-shaped elements capable of modeling arbitrary geometric configurations are developed. A number of examples with known analytical solutions are solved by using the developments presented herein. The results are in good agreement with the analytical solutions. The responses obtained with the Integrated Force Method are also compared with those generated by the standard displacement method. In most cases, the performance of the Integrated Force Method is better overall.

Kaljevic, Igor↗

NASA NTRS1999

Modeling the Influence of Stitching on Delamination Growth in Stitched Warp-Knit Composite Lap Joints

The effect of stitches on the failure of a single lap joint configuration was determined in a combined experimental and analytical study. The experimental study was conducted to determine debond growth under static monotonic loading. The stitches were shown to delay the initiation of the debond and provide load transfer beyond the load necessary to completely debond the stitched lap joint. The strain energy release rates at the debond front were calculated using a finite element-based technique. Models of the unstitched configuration showed significant values of modes I and II across the width of the joint and showed that mode III is zero at the centerline but increases near the free edge. Models of the stitched configuration showed that the stitches effectively reduced mode I to zero, but had less of an effect on modes II and III.

Glaessgen, E. H.↗

NASA NTRS1999

Debonding of Stitched Composite Joints: Testing and Analysis

The effect of stitches on the failure of a single lap joint configuration was determined in a combined experimental and analytical study. The experimental study was conducted to determine debond growth under static monotonic loading. The stitches were shown to delay the initiation ofthe debond and provide load transfer beyond the load necessary to completely debond the stitched lap joint. The strain energy release rates at the debond front were calculated using a finite element-based technique. Models of the unstitched configuration showed significant values of modes I and II across the width of the joint and showed that mode III is zero at the centerline but increases near the free edge. Models of the stitched configuration showed that the stitches effectively reduced mode I to zero, but had less of an effect on modes II and III.

Glaessgen, E. H.↗

NASA NTRS1999

Delamination and Stitched Failure in Stitched Composite Joints

The effect of stitches on the failure of a single lap joint configuration was determined in a combined experimental and finite element study. The experimental program was conducted to determine debond growth under static monotonic loading. The stitches were shown to delay the initiation of the debond and provide load transfer beyond the load necessary to completely debond the stitched lap joint. The experimentally determined debond length vs. applied load was used as an input parameter in the finite element analysis of both configurations. The strain energy release rates at the debond from were calculated using plate finite elements. Nonlinear fastener elements were used to model the stitches and multipoint constraints were used to model the contact problem. Models of the unstitched configuration showed significant values of modes I and II across the width of the joint and showed that mode III is zero at the centerline but increases near the free edge. Models of the stitched configuration showed that the stitches were effective in reducing mode I to zero, but had less of an effect on modes II and III.

Glaessgen, E. H.↗

NASA NTRS1993

Designing clutter rejection filters with complex coefficients for airborne pulsed Doppler weather radar

Ground clutter interference is a major problem for airborne pulse Doppler radar operating at low altitudes in a look-down mode. With Doppler zero set at the aircraft ground speed, ground clutter rejection filtering is typically accomplished using a high-pass filter with real valued coefficients and a stopband notch centered at zero Doppler. Clutter spectra from the NASA Wind Shear Flight Experiments of l991-1992 show that the dominant clutter mode can be located away from zero Doppler, particularly at short ranges dominated by sidelobe returns. Use of digital notch filters with complex valued coefficients so that the stopband notch can be located at any Doppler frequency is investigated. Several clutter mode tracking algorithms are considered to estimate the Doppler frequency location of the dominant clutter mode. From the examination of night data, when a dominant clutter mode away from zero Doppler is present, complex filtering is able to significantly increase clutter rejection over use of a notch filter centered at zero Doppler.

Jamora, Dennis A.↗

NASA NTRS1992

On the normal modes of Laplace's tidal equations for zonal wavenumber zero

The characteristic differences between two different rotational modes of Laplace's tidal equations for wavenumber m = 0, called the K- and the S-modes, are compared in their energy ratio and structures. It is shown that the K-mode representation captures most of the observed zonal energy with a few terms, whereas the S-mode representation requires many terms. For small vertical scale components, the K-mode series converges faster than the S-mode series. Attention is also given to the differences between the energy spectra projected upon the K- and S-modes and the merits of each set as expansion functions for the zonal atmospheric motions.

Tanaka, H. L.↗