Search NASA⌕ Search

SEARCH · Search NASA

Results for “zone refining”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Thermocapillary Flows and Their Stability: Effects of Surface Layers and Contamination

The objective is to study quantitatively thermocapillary flows in two-dimensional and axisymmetric geometries in order to learn the impact of such flows on float-zone refining configurations. The work begins with the analytical study of steady flows in slots and zones to obtain predictions of surface curvature, flow and heat transport. It then examines the instability of such flows. Three new instability mechanisms have been identified and the results show that thermocapillary flows of high Prandtl number fluid become convectively unstable while those of low Prandtl number fluid become hydrodynamically unstable. The work includes numerical simulations of steady, high Marangoni number flows in unit aspect ratio boxes and asymptotic solutions in large boxes. Furthermore, the effect of surface contamination on the steady thermocapillary flows was examined. This fundamental study focused on fluid dynamical systems used to understand events in the flow of melts in float-zone geometries both on Earth and in microgravity environments.

Davis, S. H.↗

Volatiles in the Earth: All shallow and all recycled

A case can be made that accretion of the Earth was a high-temperature process and that the primordial Earth was dry. A radial zone-refining process during accretion may have excluded low-melting point and volatile material, including large-ion lithophile elements toward the surface, leaving a refractory and zoned interior. Water, sediments and altered hydrous oceanic crust are introduced back into the interior by subduction, a process that may be more efficient today than in the past. Seismic tomography strongly suggests that a large part of the uppermantle is above the solidus, and this implies wet melting. The mantle beneath Archean cratons has very fast seismic velocities and appears to be strong to 150 km or greater. This is consistent with very dry mantle. It is argued that recycling of substantial quantities of water occurs in the shallow mantle but only minor amounts recycle to depths greater than 200 km. Recycling also oxidizes that mantle; ocean island ('hotspot') basalts are intermediate in oxidation state to island-arc and midocean ridge basalts (MORB). This suggests a deep uncontaminated reservoir for MORB. Plate tectonics on a dry Earth is discussed in order to focus attention on inconsistencies in current geochemical models of terrestrial evolution and recycling.

Anderson, Don L.↗

Processing of Lunar Soil Simulant for Space Exploration Applications

NASA's long-term vision for space exploration includes developing human habitats and conducting scientific investigations on planetary bodies, especially on Moon and Mars. To reduce the level of up-mass processing and utilization of planetary in-situ resources is recognized as an important element of this vision. Within this scope and context, we have undertaken a general effort aimed primarily at extracting and refining metals, developing glass, glass-ceramic, or traditional ceramic type materials using lunar soil simulants. In this paper we will present preliminary results on our effort on carbothermal reduction of oxides for elemental extraction and zone refining for obtaining high purity metals. In additions we will demonstrate the possibility of developing glasses from lunar soil simulant for fixing nuclear waste from potential nuclear power generators on planetary bodies. Compositional analysis, x-ray diffraction patterns and differential thermal analysis of processed samples will be presented.

Sen, Subhayu↗

Studies of liquid floating zones on SL-IV, the third Skylab mission

The behavior of liquid floating zones in a zero-gravity environment was studied by Dr. E. Gibson on SL-4. These experiments were designed from the results of previous work on floating zones in a simulated zero-gravity model. Molten floating zones are used on earth for the crystal growth and zone refining of reactive materials. The Skylab studies give some insight into the problems associated with the development of the technique for the future space processing of materials. Preliminary results are presented on the stability of the liquid zone surface under static, rotational and vibrational conditions without gravitational constraints.

Carruthers, J. R.↗

Processing of Lunar Soil Simulant for Space Exploration Applications

NASA's long-term vision for space exploration includes developing human habitats and conducting scientific investigations on planetary bodies, especially on Moon and Mars. Processing and utilization of planetary in-situ resources is recognized as an important element of this vision since it can minimize the level of up-mass that will have to be transported from earth to the planetary bodies. Within this scope and context, we have undertaken a general effort aimed primarily at extracting and refining metals, developing glass, glass-ceramic, or traditional ceramic type materials using lunar soil simulants. In this paper we will present preliminary results on our effort on simultaneous carbothermal reduction of oxides for elemental extraction and zone refining for obtaining high purity metals. In additions we will demonstrate the possibility of developing glass fibers as reinforcement agents for planetary habitat construction, glasses for fixing nuclear waste from potential nuclear power generators, and glasses for magnetic applications. The paper will also include initial thermal characterization of the glasses produced from lunar simulant. Compositional analysis of processed samples will be presented.

Sen, Subhayu↗

Zone purification of potassium chloride

Procedure for removal of sodium and bromine from KCl involves zone refining in dilute halogen atmosphere. Distribution of Na and Br at concentrations of parts per million is followed by neutron-activation analyses.

Susman, S.↗

Gas-phase hydrogen permeation through alpha iron, 4130 steel, and 304 stainless steel from less than 100 C to near 600 C

Gas phase hydrogen permeation studies were conducted on hollow, cylindrical membranes of triply zone-refined alpha iron, AISI 304 austenitic stainless steel, and AISI-SAE 4130 steel in both the normalized (ferrite and carbide) and quenched and tempered (martensite) conditions. Membrane temperature was varied from less than 100 C to near 600 C and hydrogen pressure was varied. For one membrane material, normalized 4130 steel, gas phase hydrogen transport under both steady state and nonsteady state conditions was demonstrated to be controlled by lattice diffusion. Additionally, Sievert's law was shown to be applicable. For all membrane materials, expressions for the coefficients for hydrogen permeation were determined by analysis of steady state transport; the coefficients for diffusion were determined by the lag time technique applied to nonsteady state transport; and through a knowledge of the Sievert's constants, the subsurface equilibrium lattice hydrogen concentrations were determined.

Nelson, H. G.↗

Fast differential thermal analysis.

A study is conducted of the limits of time-dependent differential thermal analysis (DTA). Applications of DTA to the hysteresis phenomena of glasses are also reported. The computation of DTA sample temperatures is discussed, giving attention to feasible heating rates, transient effects to be measured, and the simulation of DTA responses to changes in thermal diffusivity similar to hysteresis phenomena in glasses. The reproducibility of temperature recording is checked with zone-refined organic chemicals.

Wunderlich, B.↗

Solubility and thermodynamic properties of oxygen in solid molybdenum

A formula is obtained for the solubility of oxygen in solid Mo, determined in the range from 1400 to 1900 C by equilibrating rods of zone-refined Mo with mixtures of Mo and MoO2 powders. Using the known value of the free energy of formation of MoO2, a formula is obtained for the chemical potential of oxygen in the dilute solid solution. The heat of solution of oxygen in solid Mo and the excess entropy for the interstitial solid solution are also determined, assuming that the oxygen atoms reside in the octahedral interstices of bcc Mo.

Srivastava, S. C.↗

Solar concentrators for space processing applications

A study on the technological feasibility of using solar concentrators for crystal growth and zone refining in space has been performed. Previous studies related to the many aspects of the problem are reviewed. It was concluded from this effort that the technology for fabricating, orbiting, and deploying large solar concentrators has been developed. It was also concluded that the technological feasibility of space processing materials in the focal region of a solar concentrator depends primarily on two factors: (1) the ability of a solar concentrator to provide sufficient thermal energy for the process and (2) the ability of a solar concentrator to provide a thermal environment that is conducive to the processes of interest. The study indicates that solar concentrators of reasonable dimensions can satisfactorily provide both of these factors. This study also indicates that solar concentrators are attractive for space processing from the viewpoint of system specific power and system flexibility.

Mcdermit, J. H.↗

The origin of KREEP

KREEP is a lunar material having very high concentrations of incompatible elements; its name is an acronym for the incompatibles K, rare-earth elements (REE), and P. Although a few pristine (endogenously igneous) KREEPy samples were returned from the Apollo 15 and 17 sites, most KREEPy samples are polymict breccias. Most models of KREEP petrogenesis have been based on partial melting of a variety of sources. Such models fail to explain the veritable absence of variations in incompatible element patterns over the sampled portion of the moon. We have defined a KREEP component based on the average composition of Apollo 14 breccias having extremely high concentrations of incompatible elements. Normalization of accurate incompatible data for KREEPy samples from the Apollo 12, 14, 15, 16, and 17 sites to this component virtually always shows no resolvable fractionation (e.g., <10% variation in the La/Lu ratio), whereas partial melting models typically produce larger fractionations (±20–25% in La/Lu) from a factor of 2 difference in degree of partial melting. Required is a single major source that could provide KREEP to widely separated locations on the nearside of the moon. The anorthositic crust of the moon is commonly attributed to the flotation of plagioclase on a deep, moon-wide magma ocean. Fractional crystallization of this magma ocean would have produced large enrichments of incompatibles in a residual liquid. No other plausible major source of incompatibles has been proposed. We borrow the German prefix ur—meaning primeval and designate this residual liquid ‘urKREEP.’ We propose that all KREEPy rocks originated by dilution of urKREEP with crustal or mantle materials during assimilation, or zone-refining (pristine samples), or impact-induced brecciation (breccias and melt rocks). The formation of urKREEP cannot be dated precisely. Correction of breccia Rb-Sr model ages for Rb loss or gain during the early intense bombardments yields ages that cluster in the range 4.4–4.5 Gy. This implies that crystallization of the magma ocean was essentially complete at this time and is in general agreement with U-Pb evidence indicating crustal formation at 4.4 Gy. Assuming that the moon had the composition of an H-group chondrite depleted in Fe-Ni and FeS and that half the incompatibles fractionated into materials other than urKREEP, the thickness of a moon-wide urKREEP layer was <2 km. Thorium concentrations determined by gamma ray spectroscopy indicate that about 4% of the incompatibles in an H chondritic moon are now in the outermost kilometer.

Paul H. Warren↗

Measuring Interdiffusion in Binary Liquids

Liquid-phase binary interdiffusion sample is prepared by enclosing wires of two metals in a capillary tube with ends touching. While sample is at elevated temperature, tube is kept oriented with lighter metal at top to prevent convection. New method is potential research tool in such areas as zone refining of metals, recycling of spent fuel rods, and improving removal of slag and inclusions from steel castings.

Gelles, S. H.↗

Vacuum deposition of iridium on large astronomical mirrors for use in the far UV

An iridium coating has been deposited by electron-beam evaporation on a 0.91-m mirror which serves as the telescope primary of a sounding rocket instrument for far-UV spectrometry. The evaporation was carried out by applying 8 kV at 400 mA to the electron gun. Zone refined Ir of 99.99% purity was used, and the electron beam was electromagnetically swept over the surface of the evaporant. Under these conditions, deposition rates of 0.55 A/sec were achieved. The reflectance distribution achieved at a wavelength of 584 A was extremely uniform; the mean reflectance was 21.2% with a standard deviation of only 0.3%. This represents a substantial improvement over Al + MgF2 and Al + LiF coatings for applications involving multiple reflections and weak signals, as might be expected in a high-resolution spectrograph studying distant celestial objects.

Herzig, H.↗

Thin N-I-P radiation resistant solar cells

Several sets of N-I-P sola cells were fabricated from high resistivity silicon to test the effectiveness of various methods for hardening these devices against radiation. Different substrate materials were used to provide information on the effects of dopant concentration, silicon type, and the presence of oxygen. In some cells, P-type float-zone refined silicon of 800, 8000 and 15,000 omega-cm resistivity was used to provide a basis for studying resistivity and purity effects. In other cells, N-type silicon (approximately 800 omega-cm) was used to allow a comparison of dopant type. Oxygen-rich, crucible-grown, silicon (approximately 100 omega-cm, p-type) will provide information on purity effects and defect gettering. Lithium was introduced into different types of silicon to determine if mobile ions can reduce radiation induced defects in high resistivity material. Thin cells (2 mil) were fabricated to study the effects of cell thickness and carrier injection on radiation damage. The electrical characteristics of the different sets of cells were measured, analyzed, and compared prior to shipment of the cells to NASA/Lewis for irradiation.

Meulenberg, A.↗

A redetermination of the succinonitrile-water phase diagram

The phase diagram of the water/succinonitrile system often used in modeling binary metallic alloys is determined experimentally using a laser scattering method. Triply distilled and zone-refined succinonitrile is placed in a jacketed water-cooled vessel with a magnetic mixer and a copper-constantan thermocouple, and the melting point is determined under vacuum and under Ar by observing the response of a photodiode placed opposite a laser source as the chamber is cooled and reheated. Then water is added, and the eutectic and monotectic temperatures and the entire phase diagram are determined under Ar. The results are presented in a table and graph and compared to those of Schreinemakers (1897): significant discrepancies are noted and attributed to impurities in the succinonitrile used by Schreinemakers. The importance of accurate phase diagrams for modeling binary alloys is stressed.

Smith, J. E., Jr.↗