Search NASA⌕ Search

SEARCH · Search NASA

Results for “AFM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Antiferromagnetism-driven two-dimensional topological nodal-point superconductivity

Magnet/superconductor hybrids (MSHs) hold the promise to host emergent topological superconducting phases. Both one-dimensional (1D) and two-dimensional (2D) magnetic systems in proximity to -wave superconductors have shown evidence of gapped topological superconductivity with zero-energy end states and chiral edge modes. Recently, it was proposed that the bulk transition-metal dichalcogenide 4Hb-TaS 2 is a gapless topological nodal-point superconductor (TNPSC). However, there has been no experimental realization of a TNPSC in a MSH system yet. Here we present the discovery of TNPSC in antiferromagnetic (AFM) monolayers on top of an s-wave superconductor. Our calculations show that the topological phase is driven by the AFM order, resulting in the emergence of a gapless time-reversal invariant topological superconducting state. Using low-temperature scanning tunneling microscopy we observe a low-energy edge mode, which separates the topological phase from the trivial one, at the boundaries of antiferromagnetic islands. As predicted by the calculations, we find that the relative spectral weight of the edge mode depends on the edge’s atomic configuration. Our results establish the combination of antiferromagnetism and superconductivity as a novel route to design 2D topological quantum phases.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Discovery and construction of surface kagome electronic states induced by p-d electronic hybridization in Co3Sn2S2

Abstract Kagome-lattice materials possess attractive properties for quantum computing applications, but their synthesis remains challenging. Herein, based on the compelling identification of the two cleavable surfaces of Co 3 Sn 2 S 2 , we show surface kagome electronic states (SKESs) on a Sn-terminated triangular Co 3 Sn 2 S 2 surface. Such SKESs are imprinted by vertical p-d electronic hybridization between the surface Sn (subsurface S) atoms and the buried Co kagome-lattice network in the Co 3 Sn layer under the surface. Owing to the subsequent lateral hybridization of the Sn and S atoms in a corner-sharing manner, the kagome symmetry and topological electronic properties of the Co 3 Sn layer is proximate to the Sn surface. The SKESs and both hybridizations were verified via qPlus non-contact atomic force microscopy (nc-AFM) and density functional theory calculations. The construction of SKESs with tunable properties can be achieved by the atomic substitution of surface Sn (subsurface S) with other group III-V elements (Se or Te), which was demonstrated theoretically. This work exhibits the powerful capacity of nc-AFM in characterizing localized topological states and reveals the strategy for synthesis of large-area transition-metal-based kagome-lattice materials using conventional surface deposition techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Zero-field Hall effect emerging from a non-Fermi liquid in a collinear antiferromagnet V 1/3 NbS 2

Magnetically intercalated transition metal dichalcogenides (TMDs) provide a versatile three-dimensional (3D) material platform to explore quantum phenomena and functionalities that emerge from an intricate interplay among magnetism, band structure, and electronic correlations. Here, we report the observation of a nearly magnetization-free anomalous Hall effect (AHE) accompanied by non-Fermi liquid (NFL) behavior and collinear antiferromagnetism (AFM) in V 1/3 NbS 2 . Our single-crystal neutron diffraction measurements identify a commensurate, collinear AFM order formed by intercalated V moments. In the magnetically ordered state, the spontaneous AHE is tenfold greater than expected from empirical scaling with magnetization, and this strongly enhanced AHE arises in the NFL regime that violates the quasiparticle picture. V 1/3 NbS 2 challenges the existing single-particle framework for understanding AHEs based on one-body Berry curvature and highlights the potential of magnetically intercalated TMDs to unveil new electronic functionalities where many-body correlations play a critical role.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Gapless dispersive continuum in a modulated quantum kagome antiferromagnet

The pursuit of quantum spin liquid (QSL) states in condensed matter physics has drawn attention to kagome antiferromagnets (AFM) where a two-dimensional corner-sharing network of triangles frustrates conventional magnetic orders. While quantum kagome AFMs based on Cu 2+ (3d 9 , s = 1/2) ions have been extensively studied, there is so far little work beyond copper-based systems. Here we present our bulk magnetization, specific heat and neutron scattering studies on single crystals of a new titanium fluorides Cs 8 RbK 3 Ti 12 F 48 where Ti 3+ (3d 1 , s = 1/2) ions form a modulated quantum kagome antiferromagnet that does not order magnetically down to 1.5 K. Our comprehensive map of the dynamic response function $S$($Q$,$\hslash$$\omega$) acquired at 1.5 K where the heat capacity is T-linear reveals a dispersive continuum emanating from soft lines that extend along (100). The data indicate fractionalized spinon-like excitations with quasi-one-dimensional dispersion within a quasi-two-dimensional spin system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Long-lived zone-boundary magnons in an antiferromagnet

Antiferromagnetic (AFM) insulators exhibit many desirable features for spintronic applications such as fast dynamics in the THz range and robustness to fluctuating external fields. However, large damping typically associated with THz magnons presents a serious challenge for THz magnonic applications. Here, we report long-lived short-wavelength zone boundary magnons in the honeycomb AFM insulator CoTiO 3 , recently found to host topological magnons. We find that its zone-boundary THz magnons exhibit longer lifetimes than its zone-center magnons. This unusual momentum-dependent long magnon lifetime originates from several factors including the antiferromagnetic order, exchange anisotropy, a finite magnon gap, and magnon band dispersion. Our work suggests that magnon-magnon interaction may not be detrimental to magnon lifetimes and should be included in future searches for topological magnons.

42 ENGINEERING↗
DOE OSTI2025

The northeast materials database for magnetic materials

The discovery of magnetic materials with high operating temperature ranges and optimized performance is essential for advanced applications. Current data-driven approaches are limited by the lack of accurate, comprehensive, and feature-rich databases. This study aims to address this challenge by using Large Language Models (LLMs) to create a comprehensive, experiment-based, magnetic materials database named the Northeast Materials Database (NEMAD), which consists of 67,573 magnetic materials entries (www.nemad.org). The database incorporates chemical composition, magnetic phase transition temperatures, structural details, and magnetic properties. Enabled by NEMAD, we trained machine learning models to classify materials and predict transition temperatures. Our classification model achieved an accuracy of 90% in categorizing materials as ferromagnetic (FM), antiferromagnetic (AFM), and non-magnetic (NM). The regression models predict Curie (Néel) temperature with a coefficient of determination (R 2 ) of 0.87 (0.83) and a mean absolute error (MAE) of 56K (38K). These models identified 25 (13) FM (AFM) candidates with a predicted Curie (Néel) temperature above 500K (100K) from the Materials Project. This work shows the feasibility of combining LLMs for automated data extraction and machine learning models to accelerate the discovery of magnetic materials.

Ferromagnetism↗
DOE OSTI2023

Directly monitoring the shift in corrosion mechanisms of a model FeCrNi alloy driven by electric potential

Abstract Stainless steels are used in a myriad of engineering applications, including construction, automobiles, and nuclear reactors. Developing accurate, predictive mechanistic models for corrosion and electrochemical corrosion kinetics of stainless steels has been a topic of research studies over many decades. Herein, we quantified the aqueous corrosion kinetics of a model austenitic Fe–18Cr–14Ni (wt%) alloy in the presence and absence of applied potential using systematic in situ electrochemical atomic force microscopy (EC-AFM) and transmission electron microscopy (TEM). Without an applied bias, vertical dissolution of corrosion pits is controlled by the surface kinetics/diffusion hybrid mechanism, whereas lateral dissolution is diffusion controlled. When an electric bias is applied, the increase in corrosion rate is dominated by the nucleation of new pits. These insights gained by the in situ EC-AFM will allow applications of this method for a quantitative understanding of corrosion of a wider class of materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Spin structure and dynamics of the topological semimetal Co 3 Sn 2-x In x S 2

The anomalous Hall effect (AHE), typically observed in ferromagnetic (FM) metals with broken time-reversal symmetry, depends on electronic and magnetic properties. In Co 3 Sn 2-x In x S 2 , a giant AHE has been attributed to Berry curvature associated with the FM Weyl semimetal phase, yet recent studies report complicated magnetism. We use neutron scattering to determine the spin dynamics and structures as a function of x and provide a microscopic understanding of the AHE and magnetism interplay. Spin gap and stiffness indicate a contribution from Weyl fermions consistent with the AHE. The magnetic structure evolves from c-axis ferromagnetism at x = 0 to a canted antiferromagnetic (AFM) structure with reduced c-axis moment and in-plane AFM order at x = 0.12 and further reduced c-axis FM moment at x = 0.3. Since noncollinear spins can induce non-zero Berry curvature in real space acting as a fictitious magnetic field, our results revealed another AHE contribution, establishing the impact of magnetism on transport.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atomistic observation on diffusion-mediated friction between single-asperity contacts

Super-lubricity, a sliding regime in which friction almost vanishes, has been well-documented with the advent of atomic force microscopy (AFM) and molecular dynamics (MD) simulation due to its enormous implications for manufacturing micro-/nano-electromechanical systems (MEMS/NEMS). Nevertheless, the atomistic mechanisms for super-lubricious behaviors are still elusive, primarily due to a lack of direct observation of interface at atomic resolution during frictional process. Here by using in situ high-resolution transmission electron microscopy (HRTEM) coupled with AFM, we report diffusion-mediated formation of a loosely-packed interfacial layer between two metallic asperities at infinitesimal normal forces, which is responsible for the sliding regime, super-lubricity exhibiting ultra-low friction forces and continuous sliding. By contrast, the loosely-packed interfacial layer vanishes along with the super-lubricity, leading to typical stick-slip friction. Additionally, in situ TEM observation and MD simulations reveals the crucial role that atom diffusion plays in atomic friction, and provides new insights into the fundamental mechanisms of super-lubricity.

42 ENGINEERING↗
DOE OSTI2020

Elucidating nanoscale mechanical properties of diabetic human adipose tissue using atomic force microscopy

Abstract Obesity-related type 2 diabetes (DM) is a major public health concern. Adipose tissue metabolic dysfunction, including fibrosis, plays a central role in DM pathogenesis. Obesity is associated with changes in adipose tissue extracellular matrix (ECM), but the impact of these changes on adipose tissue mechanics and their role in metabolic disease is poorly defined. This study utilized atomic force microscopy (AFM) to quantify difference in elasticity between human DM and non-diabetic (NDM) visceral adipose tissue. The mean elastic modulus of DM adipose tissue was twice that of NDM adipose tissue (11.50 kPa vs. 4.48 kPa) to a 95% confidence level, with significant variability in elasticity of DM compared to NDM adipose tissue. Histologic and chemical measures of fibrosis revealed increased hydroxyproline content in DM adipose tissue, but no difference in Sirius Red staining between DM and NDM tissues. These findings support the hypothesis that fibrosis, evidenced by increased elastic modulus, is enhanced in DM adipose tissue, and suggest that measures of tissue mechanics may better resolve disease-specific differences in adipose tissue fibrosis compared with histologic measures. These data demonstrate the power of AFM nanoindentation to probe tissue mechanics, and delineate the impact of metabolic disease on the mechanical properties of adipose tissue.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Ultrafast optical control of surface and bulk magnetism in magnetic topological insulator/antiferromagnet heterostructure

Abstract Optical control of the magnetic properties in topological insulator systems is an important step in applying these materials in ultrafast optoelectronic and spintronic schemes. In this work, we report the experimental observation of photo-induced magnetization dynamics in the magnetically doped topological insulator (MTI)/antiferromagnet (AFM) heterostructure composed of Cr-(Bi,Sb) 2 Te 3 /CrSb. Through proximity coupling to the AFM layer, the MTI displays a dramatically enhanced magnetism, with robust perpendicular magnetic anisotropy. When subjected to intense laser irradiation, both surface and bulk magnetism of the MTI are weakened by laser-induced heating of the lattice, however, at the surface, the deleterious heat effect is compensated by the strengthening of Dirac-hole-mediated exchange coupling as demonstrated by an unconventional pump-fluence-dependent exchange-bias effect. Through theoretical analyses, the sizes of exchange coupling energies are estimated in the MTI/AFM bilayer structure. The fundamentally different mechanisms supporting the surface and bulk magnetic order in MTIs allow a novel and distinctive photo-induced transient magnetic state with antiparallel spin configuration, which broadens the understanding of the magnetization dynamics of MTIs under ultrashort and intense optical excitation.

42 ENGINEERING↗
DOE OSTI2023

Domain-wall magnetoelectric coupling in multiferroic hexagonal YbFeO 3 films

Electrical modulation of magnetic states in single-phase multiferroic materials, using domain-wall magnetoelectric (ME) coupling, can be enhanced substantially by controlling the population density of the ferroelectric (FE) domain walls during polarization switching. In this work, we investigate the domain-wall ME coupling in multiferroic h-YbFeO 3 thin films, in which the FE domain walls induce clamped antiferromagnetic (AFM) domain walls with reduced magnetization magnitude. Simulation according to the phenomenological theory indicates that the domain-wall ME effect is dramatically enhanced when the separation between the FE domain walls shrinks below the characteristic width of the clamped AFM domain walls during the ferroelectric switching. Experimentally, we show that while the magnetization magnitude remains same for both the positive and the negative saturation polarization states, there is evidence of magnetization reduction at the coercive voltages. These results suggest that the domain-wall ME effect is viable for electrical control of magnetization.

42 ENGINEERING↗
DOE OSTI2023

Large anomalous Hall effect and negative magnetoresistance in half-topological semimetals

Proposed mechanisms for large intrinsic anomalous Hall effect (AHE) in magnetic topological semimetals include diverging Berry curvatures of Weyl nodes, anticrossing nodal rings or points of non-trivial bands. Here we demonstrate that a half-topological semimetal (HTS) state near a topological critical point can provide an alternative mechanism for a large AHE via systematic studies on an antiferromagnetic (AFM) half-Heusler compound TbPdBi. We not only observe a large AHE with tanΘ H ≈ 2 in its field-driven ferromagnetic (FM) phase, but also find a distinct Hall resistivity peak in its canted AFM phase. Moreover, we observe a large negative magnetoresistance with a value of ~98%. Our in-depth theoretical modelling indicates that these exotic transport properties originate from the HTS state which exhibits Berry curvature cancellation between the trivial spin-up and nontrivial spin-down bands. Our study offers alternative strategies for improved materials design for spintronics and other applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Pressure-induced changes in structure, magnetic order and superconductivity in the ferromagnetic topological insulator MnBi 8 Te 13

Introducing superconductivity (SC) in an intrinsic magnetic topological system remains a significant challenge in modern condensed matter physics. Here, we show that SC can be induced by applying high pressure to a promising ambient-pressure magnetic topological insulator candidate, MnBi 8 Te 13 . Using electrical transport, magnetic susceptibility, and synchrotron x-ray diffraction, we construct a detailed temperature - pressure phase diagram. The ambient-pressure ferromagnetic order is progressively suppressed and replaced by an antiferromagnetic state. Above 16.6 GPa, bulk SC emerges with a critical temperature up to 6.8 K. This pressure-induced SC may co-exist with another AFM dome. In contrast, the related compounds with higher magnetic ion (Mn) concentration show no SC, highlighting the crucial role of Mn concentration in stabilizing SC. The observation of pressure-induced FM-AFM-SC transitions in MnBi 8 Te 13 not only establishes it as a rare Mn-based SC but also provides a platform to study the interplay between magnetism, SC, and potentially nontrivial band topology in correlated magnetic materials.

Huyan, S. [Ames Laboratory, and Iowa State Univ., ↗
DOE OSTI2022

Entangled core/shell magnetic structure driven by surface magnetic symmetry-breaking in Cr 2 O 3 nanoparticles

Bulk Cr 2 O 3 is an antiferromagnetic (AFM) oxide that exhibits the magnetoelectric effect at room temperature, with neither spontaneous magnetization nor net electric polarization. These physical properties stem from a subtle competition between exchange and crystal field interactions. In this article, we exploit the symmetry breaking at the surface of Cr 2 O 3 nanoparticles for unbalancing this delicate physical equilibrium. The emerging weak ferromagnetic signal we observe persists up to near room temperature (≈ 270 K) at which the antiferromagnetic order disappears. In addition, an exchange-bias effect, that rapidly decreases on heating from low temperature up to 30 K, is resistant to thermal disorder above 200 K. In conclusion, our findings point to the possible formation of an entangled core/shell magnetic structure, where pinned uncompensated spins at the shell are randomly distributed in a low-temperature spin-glass ordering, with low net magnetic moment and an ordering temperature governed by the AFM Néel temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Magnetic order in a quenched-high-temperature-phase of Cu-doped MnBi

Permanent magnets are of great importance due to their vast applications. MnBi has been proposed to be a potential permanent magnet that can be widely used while past efforts have been focused on optimizing the ferromagnetic low-temperature phase of MnBi. Herein, we report a series of new materials, Cu x Mn 1–x Bi, crystallizing in a quenched high-temperature-phase (QHTP) MnBi-related structure. In this study, we synthesized single crystals of Cu x Mn 1–x Bi and found that they crystallize in an unreported trigonal structure (P$\bar{3}$1c). Magnetic properties measurements imply high-temperature antiferromagnetic (AFM) ordering and low-temperature ferromagnetic or ferrimagnetic (FM/FiM) ordering. By analyzing the doping effect on crystal structure and magnetic properties, we established a magnetic phase diagram for Cu-doped MnBi and attributed the AFM and FM/FiM to two different atomic sites of Mn.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

In situ multimodal imaging for nanoscale visualization of tribofilm formation

A third of the energy from fuel combustion in passenger car gasoline engines is lost due to friction. Carefully designed engine lubricants can recover some of these losses by reducing friction and wear by forming a nanometer-scale chemico-physico tribofilm between surfaces. Accordingly, attention has focused on developing oil formulations that form low-friction tribofilms. However, analyses of resultant tribofilms are typically conducted after tribo-tests with conventional characterization tools and do not offer insights into tribofilm formation and evolution, precluding information critical to tuning tribofilm properties. In this work, we developed a unique multimodal methodology based on Atomic Force Microscopy (AFM) with local probe heating for in situ tribological studies that activates friction modifiers and simultaneously captures the evolution of friction and surface roughness, with nanometer resolution. As a platform to demonstrate the ability of this methodology to visualize dynamics of tribofilm formation in situ, we apply it to molybdenum-based friction modifiers to distinguish key factors in their functionality and correlate nanoscale AFM and Friction Force Microscopy data to bench tribo-tests used in the industry. To decode the formation mechanisms observed in situ and underlying chemistry of tribofilms, we performed ab initio Molecular Dynamics (AIMD) simulations at comparable conditions. AIMD simulations confirmed both nanoscale and bench tribo-test results and showed deviations in molecular organization in tribofilms that are formed from different molybdenum-based friction modifiers that corroborates with surface functionality. With this innovative methodology, we demonstrate proof-of-principle in situ formation of molybdenum-based tribofilms directly on steel surfaces that could be applied generally to studying tribofilm formation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High quality epitaxial thin films and exchange bias of antiferromagnetic Dirac semimetal FeSn

FeSn is a topological semimetal (TSM) and kagome antiferromagnet (AFM) composed of alternating Fe 3 Sn kagome planes and honeycomb Sn planes. This unique structure gives rise to exotic features in the band structures such as the coexistence of Dirac cones and flatbands near the Fermi level, fully spin-polarized 2D surface Dirac fermions, and the ability to open a large gap in the Dirac cone by reorienting the Néel vector. In this paper, we report the synthesis of high-quality epitaxial (0001) FeSn films by magnetron sputtering. Using FeSn/Py heterostructures, we show a large exchange bias effect that reaches an exchange field of 220 Oe at 5 K, providing unambiguous evidence of antiferromagnetism and strong interlayer exchange coupling in our films. Field cycling studies show steep initial training effects, highlighting the complex magnetic interactions and anisotropy. Importantly, our work provides a simple, alternative means to fabricate FeSn films and heterostructures, making it easier to explore the topological physics of AFM TSMs and develop FeSn-based spintronics.

36 MATERIALS SCIENCE↗