Search NASA⌕ Search

SEARCH · Search NASA

Results for “ALTERNATE REDUCTANT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Federal Emergency Management Agency Mobile Housing Unit Running Gear Testing (Final Report)

The Federal Emergency Management Agency (FEMA) stages manufactured housing units (MHUs) at key locations to be used during disasters when other housing accommodations cannot be arranged for individuals or families. Due to the unpredictability of natural disasters and the limitations of the manufactured housing industry to produce large numbers of MHUs in very short periods of time, it is necessary for FEMA to store a large number of units for many months or years. With these long storage periods come degradation issues with frames, tires, bearing, and braking systems. These types of issues are also of interest to the U.S. Department of Transportation (DOT) Federal Motor Carrier Safety Administration (FMCSA) because regulated carriers normally transport these units and 49 CFR 393.75 Tires specifies tire loading restrictions for manufactured homes. To compare the running gear (tires, brakes, drums, bearings, axles, springs, and spring mounting hardware) currently specified in the 2014 Rugged Based Performance Requirements (RBPR) and the newly recommended running gear specified in the upcoming revision to the RBPR, the Oak Ridge National Laboratory (ORNL) outlined a Longevity Test Plan, which focused on the assessment of component longevity (failure rates by component type). The Test Plan also studied the forces imparted to the MHU from the running gear from interaction with the roadway for both the running gear in the 2014 RBPR and the running gear specified in the upcoming RBPR revision. Since the assessment of component longevity and failures are also issues of concern for FMCSA, both agencies collaborated to support the research presented in this report. The tests and data collection were conducted at the Navistar Proving Grounds (NPG) in New Carlisle (near South Bend), Indiana, during the May-November 2018 period. Four alternatives for the suspension system of a typical three-bedroom MHU were considered in this test. Alternative 0 was the MHU that was selected from the FEMA staging area in Selma, Alabama. Empirical data had shown that, on average, this alternative experiences one tire failure every 150 miles (or 0.0067 tire failures per mile traveled). Before testing, Alternative 0 was equipped with similar running gear hardware, although in new condition and installed following the manufacturer’s specifications. This became the Baseline Unit, or Alternative 1. Another unit, also selected from the FEMA staging area in Selma, Alabama, was equipped with better axles (i.e., axles that were rated for 7,000lbs as opposed to 6,000lbs for the Baseline Unit) and better tires. This became the Upgrade Unit, or Alternative 2. At the end of the Longevity Test, the Upgrade Unit was mounted with radial tires. This became Alternative 3.Alternative 1 (Baseline Unit) had, on average, one tire failure every 251 miles (or 0.0040 tire failures per mile traveled). So, by simply following the correct manufacturer’s specifications for the assembly of the transportation system, a reduction of 41% in the per mile tire failure was achieved. In the same test, Alternative 2 (Upgrade Unit) showed, on average, one tire failure every 728 miles traveled (or 0.0014 tire failure s per mile traveled). When the Upgrade Unit was mounted with radial tires in the last part of the test, no tire failures were observed for the 2,400 miles tested. That is, in the case of the radial tires (Alternative 3) the tire failure was less than one per 2,400 miles traveled (or less than 0.0004 tire failures per mile traveled). The data collected for the Longevity Test showed that the maximum accelerations were registered in all cases at the center of the MHU in the vertical direction. The overall maximum was registered by the Baseline Unit, Alternative 1. If that value is normalized to 100%, then the Upgrade Unit (Alternative 2) showed, on average, 81% at the same location, and Alternative 3 (radial-tire test) 59%. That is, the upgraded transportation system showed a reduction of 19% and 41% in the vertical accelerations transmitted to MHU at its center when regular and radial tires, respectively, were used. As part of the Test Protocol, NPG conducted a visual inspection of the MHUs and transportation system at the end of each test day. ORNL reviewed all the inspection reports in an attempt to determine if there was any difference in the damage that the Baseline and Upgrade MHUs showed during the test. The Upgrade Unit always showed lower accelerations transmitted to the MHU than the Baseline Unit. In most cases, these differences were statistically significant. The FEMA inspection report, conducted by a FEMA certified inspector at the end of the tests, included a shorter list of damaged items for the Baseline Unit than for the Upgrade Unit, although similar type of damages was described for both units. This may be an indication that, although lower than those of the Baseline Unit, the accelerations transmitted by the Upgrade Unit were above the threshold at which MHU elements start to fail.

42 ENGINEERING↗

Selective Electrochemical Reduction of CO 2 to Metal Oxalates in Nonaqueous Solutions Using Trace Metal Pb on Carbon Supports Enhanced by a Tailored Microenvironment

In this work, the electroreduction of carbon dioxide (CO 2 ) to oxalate is enabled by incorporating trace metallic lead (Pb) on carbon‐based supports (CBS) with polymer overlayers. These composite materials serve as an efficient electrocatalytic system for the facile conversion and storage of CO 2 , a pernicious atmospheric pollutant. Results from controlled potential electrolysis experiments indicate that 1) trace metallic Pb on the ppb scale is active toward the reductive coupling of CO 2 to oxalate at comparable Faradaic efficiencies to bulk metallic Pb and 2) polymer encapsulation of this trace metallic Pb leads to promotion of CO 2 reduction (CO 2 R) selectively to metal oxalates over other products such as CO. Importantly, metal oxalates are important alternative cementitious materials and precursors for other materials’ synthesis applications. The solid products undergo rigorous spectroscopic characterization, including 13 CO 2 labeling experiments, to ensure the metal oxalates are in fact produced from CO 2 R. These findings serve as a model for leveraging microenvironment effects to enhance activity and selectivity for CO 2 R using trace‐metal catalysts for carbon utilization and storage technologies.

alternative cementitious materials↗

Role of Metal Cocatalysts in the Photocatalytic Production of Hydrogen from Water Revisited

The use of photocatalysts to promote the production of molecular hydrogen from water, following the so-called water splitting reaction, continues to be a promising route for the green production of fuels. The molecular basis of this photocatalysis is the photoexcitation of electrons from the valence band of semiconductors to their conduction band, from which they can be transferred to chemical reactants, protons in the case of water, to promote a reduction reaction. The mechanism by which such a process takes place has been studied extensively using titanium oxide, a simple material that fulfills most requirements for water splitting. However, photocatalysis with TiO 2 tends to be highly inefficient; a cocatalyst, commonly a late transition metal (Au, Pt) in nanoparticle form, needs to be added to facilitate the production of H 2 . The metal is widely believed to help with the scavenging of the excited electrons from the conduction band of the semiconductor in order to prevent their recombination with the accompanying hole formed in the valence band, a step that cancels the initial photon absorption and competes with the photolytic chemical reduction. Here we review and analyze the molecular basis for that mechanism and argue for an alternative explanation, that the role of the metal is to help with the recombination of the atomic hydrogen atoms produced by proton reduction on the semiconductor surface instead. First, we summarize what is known about the electronic structure of these photocatalysts and how the electronic levels need to line up for the reduction of protons in water to be feasible. Next, we review the current understanding of the dynamics of the steps associated with the absorption of photons, the de-excitation via electron–hole pair recombination and fluorescence decay, and the electronic transitions that lead to proton reduction, and contrast those with the rates of the chemical steps required to produce molecular hydrogen. The following section addresses the changes introduced by the addition of the metal cocatalyst, comparatively evaluating its role as either an electron scavenger or a promoter of the recombination of hydrogen atoms. A discussion of the viable chemical mechanisms for the latter pathway is included. Finally, we briefly mention other associated aspects of this photocatalysis, including the possible promotion of H 2 production with visible light via resonant excitation of the surface plasmon of Au nanoparticles, the use of single-metal (Au, Pt) atom catalysts and of yolk–shell nanostructures, and the reduction of organic molecules. We end with a brief personal perspective on the possible generality of the concepts introduced in this Critical Review.

08 HYDROGEN↗

Potential for Reduction in Emissions by U.S. Industries While Meeting Thermal Energy Demand

The study highlights the greenhouse gas emissions by various top U.S. industries while meeting their need for thermal energy (heat) and potential for reduction in their carbon foot print by using possible clean energy alternatives such as nuclear energy. Most industries vary in their production and usage of thermal energy, which is shown by detailed process diagram, and some have a combined heat and power system, which generally provides mid- to high-quality of steam. The paper focuses on these detailed processes, and associated requirement and emissions entailed from these process with opportunities in reduction of carbon emission.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Semiconductor/metal nanocomposites formed by in situ reduction method in multilayer thin films

A layer-by-layer adsorption and in situ reduction method was adopted for synthesizing semiconductor/metal nanocomposites in multilayer ultra-thin films. Alternate adsorption of ZnO nanoparticles modified with poly(ethyleneimine), hydrogentetrachloroaurate and poly(styrenesulfonate) sodium results in the formation of ZnO/AuCl{sub 4}{sup -}-loaded multilayer films. In situ reduction of the incorporated metal ions by heating yields ZnO/Au nanocomposites in the films. UV-vis absorption spectroscopy and X-ray photoelectron spectroscopy were used to characterize the components of the composite films. UV-vis spectra indicate regular growth of the films. The electrochemistry behavior of the multilayer films was studied in detail on indium tin oxide electrode. The combined results suggest that the layer-by-layer adsorption and subsequent reduction method used here provides an effective way to synthesize ZnO/Au nanocomposites in the polymer matrix.

36 MATERIALS SCIENCE↗

Sulfur residues in niobium electropolishing

Electropolishing (EP) in sulfuric/hydrofluoric acid mixtures affords significantly greater surface smoothness than the incumbent buffered chemical polishing (BCP), making it attractive as the future baseline technology for SRF cavity manufacture. However, reported observations of particulate sulfur residues raise concern. One hypothesis is sulfate reduction to elemental sulfur at the cathode, where the measured potential drop is thermodynamically sufficient. Alternatively, the low effectiveness of the cathode?s aluminum oxide surface as a hydrogen recombination catalyst could lead to accumulation of atomic hydrogen, a powerful reductant. We explored these possibilities under standard EP conditions in a small three-electrode laboratory cell. We varied aluminum cathode area to obtain different current densities (and thus overpotentials) at constant cell current. We substituted platinum, an excellent hydrogen recombination catalyst, for aluminum in some experiments. Surface of cathodes were examined with Scanning Electron Microscope (SEM). Surface composition was analyzed by Energy Dispersive X-Ray Spectroscopy (EDS) and X-Ray Photoelectron Spectroscopy (XPS).

Reece, Charles↗

Improved Hybrid Modeling of Spent Fuel Storage Facilities

This work developed a new computational method for improving the ability to calculate the neutron flux in deep-penetration radiation shielding problems that contain areas with strong streaming. The “gold standard” method for radiation transport is Monte Carlo (MC) as it samples the physics exactly and requires few approximations. Historically, however, MC was not useful for shielding problems because of the computational challenge of following particles through dense shields. Instead, deterministic methods, which are superior in term of computational effort for these problems types but are not as accurate, were used. Hybrid methods, which use deterministic solutions to improve MC calculations through a process called variance reduction, can make it tractable from a computational time and resource use perspective to use MC for deep-penetration shielding. Perhaps the most widespread and accessible of these methods are the Consistent Adjoint Driven Importance Sampling (CADIS) and Forward-Weighted CADIS (FW-CADIS) methods. For problems containing strong anisotropies, such as power plants with pipes through walls, spent fuel cask arrays, active interrogation, and locations with small air gaps or plates embedded in water or concrete, hybrid methods are still insufficiently accurate. In this work, a new method for generating variance reduction parameters for strongly anisotropic, deep penetration radiation shielding studies was developed. This method generates an alternate form of the adjoint scalar flux quantity, Φ Ω , which is used by both CADIS and FW-CADIS to generate variance reduction parameters for local and global response functions, respectively. The new method, called CADIS-Ω, was implemented in the Denovo/ADVANTG software. Results indicate that the flux generated by CADIS-Ω incorporates localized angular anisotropies in the flux more effectively than standard methods. CADIS-Ω outperformed CADIS in several test problems. This initial work indicates that CADIS- may be highly useful for shielding problems with strong angular anisotropies. This is a benefit to the public by increasing accuracy for lower computational effort for many problems that have energy, security, and economic importance.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Catalysts for nitrogen reduction to ammonia

We present the production of synthetic ammonia remains dependent on the energy- and capital-intensive Haber-Bosch process. Extensive research in molecular catalysis has demonstrated ammonia production from di-nitrogen, albeit at low production rates. Mechanistic understanding of di-nitrogen reduction to ammonia continues to be delineated through study of molecular catalyst structure, as well as through understanding the naturally-occurring nitrogenase enzyme. The transition to Haber-Bosch alternatives through robust, heterogeneous catalyst surfaces remains an unsolved research challenge. Catalysts for electrochemical reduction of di-nitrogen to ammonia are a specific focus of research, due to the potential to compete with Haber-Bosch and eliminate associated carbon dioxide emissions. However, limited progress has been made, as most electrocatalyst surfaces lack specificity towards nitrogen fixation. Lastly in this review, we discuss the progress of the field in developing a mechanistic understanding of nitrogenase-promoted and molecular catalyst-promoted ammonia synthesis and provide a review of the state-of-the-art and scientific needs for heterogeneous electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Production of Biomass-Based Automotive Lubricants by Reductive Etherification

Growing concern with the effects of CO 2 emissions due to the combustion of petroleum-based transportation fuels has motivated the search for means to increase engine efficiency. The discovery of ethers with low viscosity presents an important opportunity to improve engine efficiency and fuel economy. We show here a strategy for the catalytic synthesis of such ethers by reductive etherification/O-alkylation of alcohols using building blocks that can be sourced from biomass. We find that long-chain branched ethers have several properties that make them superior lubricants to the mineral oil and synthetic base oils used today. These ethers provide a class of potentially renewable alternatives to conventional lubricants produced from petroleum and may contribute to the reduction of greenhouse gases associated with vehicle emissions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fundamental Studies of Metal Centered Transformations Relevant to Catalysis

The overall objectives the research performed have been to advance the mission of the U. S. Department of Energy, with specific emphasis concerned with the conversion and use of fossil and renewable energy resources, and the synthesis of advanced chemicals. Achieving this objective requires improvements in rational catalyst design by establishing details of reaction mechanisms and their kinetics. Therefore, over the course of this award, emphasis has been directed towards obtaining detailed information concerned with fundamental transformations that occur at metal centers, with particular attention given towards reactions such as (i) hydrodesulfurization (HDS) and hydrodenitrogenation (HDN), (ii) the use of carbon dioxide as a renewable C1 feedstock, (iii) the generation of hydrogen on demand, and (iv) transformations that involve the cleavage of H–H, C–H and C–C bonds. HDS and HDN are the essential processes for removing sulfur- and nitrogen-containing impurities from crude oil in order to obtain (i) cleaner fuels that minimize environmental pollution and (ii) cleaner chemical feedstocks that are less likely to poison the catalysts that are used for subsequent transformations. The catalysts employed for HDS and HDN are typically molybdenum and tungsten sulfides and, to gain insight into these transformations at the molecular level, we have focused on developing the coordination chemistry of heterocyclic sulfur and nitrogen compounds with molybdenum and tungsten. For example, we obtained the first examples of the cleavage of thiophene C–S bonds by employing molecular molybdenum compounds. The efficient utilization of carbon dioxide as a renewable C 1 source for the synthesis of value added organic chemicals and fuels has prompted much effort towards developing catalytic reactions to functionalize CO 2 . One such approach is hydrosilylation, which can proceed in a stepwise manner to afford a series of products with different levels of reduction, namely silyl formates, silyl acetals, methoxy silanes and methane. Despite the utility of these transformations, however, most catalysts employ precious metals, which operate at elevated temperatures, and control of the level of reduction is challenging. Therefore, it is significant that we have developed zinc and magnesium systems that can achieve hydrosilylation of CO 2 and which may be modified to control the level of reduction. The growing demand for energy requires the development of alternative energy sources that are more sustainable than fossil fuels and have a reduced impact on the environment. In this regard, an attractive energy storage medium is provided by hydrogen, which can, for example, be consumed in a fuel cell with only water as a byproduct. Unfortunately, a problem with using hydrogen in this manner is that present storage and transportation techniques are inadequate. For example, not only does storing liquid hydrogen present a safety risk, considerable energy is also required to liquefy the hydrogen and maintain it in this form. Therefore, we have focused on the application of chemical methods to provide hydrogen on demand. One such method utilizes formic acid as a storage medium and we reported the first examples of molybdenum compounds that serve as catalysts for releasing H 2 from formic acid. The nature of the interaction of a C–H bond with a metal center is of pivotal importance in many transformations of organic molecules, and we have examined several systems to probe how the interaction varies according to whether the metal is molybdenum or tungsten. These studies demonstrate that tungsten exhibits a greater propensity to cleave a C–H bond. While the oxidative addition of C–H bonds to a metal center is well precedented, transformations that feature oxidative addition of C–C bonds are uncommon and so it is noteworthy that we have observed the cleavage of a strong C–C bond that is a component of an unstrained 6-membered aromatic ring. The oxidative addition of dihydrogen to a metal center, and its microscopic reverse, reductive elimination, are two of the simplest yet most important transformations in organometallic chemistry. For example, oxidative addition of dihydrogen is a key step in many transition metal-catalyzed reactions involving H 2 . However, relatively few studies have established in detail the factors that influence the thermodynamics of this transformation. Therefore, it is significant that we demonstrated experimentally that that the energetics of the oxidative addition of H 2 to the six coordinate molybdenum and tungsten halide complexes depends very strongly on the nature of both the metal and the halogen. Deuterium kinetic isotope effects (KIEs) and equilibrium isotope effects (EIEs) serve as versatile tools to infer details about reaction mechanisms. In this regard, primary deuterium isotope effects are often interpreted by using two simple guidelines: (i) the KIE for an elementary reaction is normal (k H /k D > 1) and (ii) the EIE is dictated by deuterium preferring to be located in the site corresponding to the highest frequency oscillator. We have evaluated the applicability of these rules to the interactions of H–H and C–H bonds with a transition metal center and our results question the ability to predict primary EIEs in these systems based on the simple notion that deuterium prefers to occupy the highest frequency oscillator. The key findings are that the EIEs for (i) formation of σ–complexes by coordination of H–H and C–H bonds and (ii) oxidative addition of dihydrogen exhibit unusual temperature dependencies, such that the same system may exhibit both normal (i.e. K H /K D > 1) and inverse (i.e. K H /K D < 1) values.

02 PETROLEUM↗

Alkali cation-induced cathodic corrosion in Cu electrocatalysts

The reconstruction of Cu catalysts during electrochemical reduction of CO 2 is a widely known but poorly understood phenomenon. Herein, we examine the structural evolution of Cu nanocubes under CO 2 reduction reaction and its relevant reaction conditions using identical location transmission electron microscopy, cyclic voltammetry, in situ X-ray absorption fine structure spectroscopy and ab initio molecular dynamics simulation. Our results suggest that Cu catalysts reconstruct via a hitherto unexplored yet critical pathway - alkali cation-induced cathodic corrosion, when the electrode potential is more negative than an onset value (e.g., –0.4 V RHE when using 0.1 M KHCO 3 ). Having alkali cations in the electrolyte is critical for such a process. Consequently, Cu catalysts will inevitably undergo surface reconstructions during a typical process of CO 2 reduction reaction, resulting in dynamic catalyst morphologies. While having these reconstructions does not necessarily preclude stable electrocatalytic reactions, they will indeed prohibit long-term selectivity and activity enhancement by controlling the morphology of Cu pre-catalysts. Alternatively, by operating Cu catalysts at less negative potentials in the CO electrochemical reduction, we show that Cu nanocubes can provide a much more stable selectivity advantage over spherical Cu nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Program Benefits Guidance: Analysis of Benefits Associated with Projects and Technologies Supported by the Alternative and Renewable Fuel and Vehicle Technology Program

The Alternative and Renewable Fuel and Vehicle Technologies Program (ARFVTP) supports a wide range of alternative, low-carbon fuel and vehicle projects in California. This report focuses on two types of ARFVTP benefits. Expected benefits reflect successful deployment of vehicles and fuels supported through program projects. Market transformation benefits represent benefits resulting from project influences on future market conditions to accelerated technology adoption rates. Data collected directly from ARFVTP projects funded from 2009 to first quarter 2014 are used as inputs to the benefits analysis, where possible. Expected benefit estimation methods rely primarily upon project-level data and result in year single-point estimates within the 2011 to 2025 analysis period. Results suggest that the 178 projects evaluated for expected benefits, representing an investment of $351.3 million in ARFVTP funds, could result in a reduction in petroleum fuel use by 236 million gallons per year and greenhouse gases (GHGs) by 1.7 million metric tonnes carbon dioxide equivalent (MMTCO2e) per year by 2025. Market transformation benefits are described as accruing in addition to expected benefits. They are inherently more uncertain and theoretical than expected benefits, and are therefore reported as high and low ranges, with results suggesting reductions of 1.1 MMTCO2e to 2.5 MMTCO2e per year in GHG reductions and 102 million to 330 million gallons per year in petroleum fuel reductions by 2025. Taking both benefit types into account, results suggest that ARFVTP projects have the potential to make substantial progress toward meeting California's long-term GHG and petroleum fuel use reduction goals. As additional project data become available and market success with alternative and renewable fuels and vehicles grows, the analytic framework relied upon to develop these estimates will become more rigorous and will have a greater capacity to inform future ARFVTP activities.

25 ENERGY STORAGE↗

A cost-benefit analysis of a deposit-refund program for beverage containers in Israel

The paper presents a full cost-benefit analysis of a deposit-refund program for beverage containers in Israel. We examine all cost elements of the program - storage, collection, and treatment costs of empty containers, and all potential benefits - savings in alternative treatment costs (waste collection and landfill disposal), cleaner public spaces, reduction of landfill volumes, energy-savings externalities associated with use of recycled materials, and creation of new workplaces. A wide variety of data resources is employed, and some of the critical issues are examined via several approaches. The main finding of the paper is that the deposit-refund program is clearly economically worthwhile. The paper contributes to the growing body of literature on deposit-refund programs by its complete and detailed analysis of all relevant factors of such a program, and also specifically in its analysis of the savings in alternative waste management costs. This analysis reveals greater savings than are usually assumed, and thus shows the deposit-refund program to be highly efficient.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

7-Carboxy-7-deazaguanine Synthase: A Radical S -Adenosyl- l -methionine Enzyme with Polar Tendencies

Radical S-adenosyl-l-methionine (SAM) enzymes are widely distributed and catalyze diverse reactions. SAM binds to the unique iron atom of a site-differentiated [4Fe-4S] cluster and is reductively cleaved to generate a 5'-deoxyadenosyl radical, which initiates turnover. 7-Carboxy-7-deazaguanine (CDG) synthase (QueE) catalyzes a key step in the biosynthesis of 7-deazapurine containing natural products. 6-Carboxypterin (6-CP), an oxidized analogue of the natural substrate 6-carboxy-5,6,7,8-tetrahydropterin (CPH4), is shown to be an alternate substrate for CDG synthase. Under reducing conditions that would promote the reductive cleavage of SAM, 6-CP is turned over to 6-deoxyadenosylpterin (6-dAP), presumably by radical addition of the 5'-deoxyadenosine followed by oxidative decarboxylation to the product. By contrast, in the absence of the strong reductant, dithionite, the carboxylate of 6-CP is esterified to generate 6-carboxypterin-5'-deoxyadenosyl ester (6-CP-dAdo ester). Structural studies with 6-CP and SAM also reveal electron density consistent with the ester product being formed in crystallo. The differential reactivity of 6-CP under reducing and nonreducing conditions highlights the ability of radical SAM enzymes to carry out both polar and radical transformations in the same active site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Use of a Lignin-Based Admixture for Tailoring the Rheological Properties of Mortars for 3D Printing: Preprint

Efforts toward decarbonizing construction materials and industrial processes related to cement and concrete can be aided via multifaceted approaches that target alternative admixtures as well as precision control of fabrication. Chemical admixtures for water reduction have played a crucial role in the development of advanced concrete mixtures. Newer biomass processing techniques developed for aviation fuel production from corn stover biomass produce a more reactive lignin byproduct that is suitable for chemical modifications to mimic the properties of polycarboxylate ether admixtures with a smaller carbon footprint. The present study examines the use of lignin-based water-reducing admixture in cement pastes and mortar mixtures for 3D printing. The experimental program explores the use of different dosages of lignin-based admixture to produce 3D-printed samples with appropriate extrudability and buildability. The rheological characterization was performed to determine the flow curve of various mixtures. Finally, the heat of hydration of cement pastes was monitored via isothermal calorimetry to assess the impact of lignin-based admixtures on the hydration process of cement. The results of this study indicate that the use of biomass by-products, such as lignin-based admixtures have great potential to effectively control the fresh-state properties of cement-based materials.

bio-based admixtures↗

Risk Assessment of Salmonellosis from Consumption of Alfalfa Sprouts and Evaluation of the Public Health Impact of Sprout Seed Treatment and Spent Irrigation Water Testing

Abstract We developed a risk assessment of human salmonellosis associated with consumption of alfalfa sprouts in the United States to evaluate the public health impact of applying treatments to seeds (0–5‐log 10 reduction in Salmonella ) and testing spent irrigation water (SIW) during production. The risk model considered variability and uncertainty in Salmonella contamination in seeds, Salmonella growth and spread during sprout production, sprout consumption, and Salmonella dose response. Based on an estimated prevalence of 2.35% for 6.8 kg seed batches and without interventions, the model predicted 76,600 (95% confidence interval (CI) 15,400 – 248,000) cases/year. Risk reduction (by 5 ‐ to 7‐fold) predicted from a 1‐log 10 seed treatment alone was comparable to SIW testing alone, and each additional 1‐log 10 seed treatment was predicted to provide a greater risk reduction than SIW testing. A 3‐log 10 or a 5‐log 10 seed treatment reduced the predicted cases/year to 139 (95% CI 33 – 448) or 1.4 (95% CI <1 – 4.5), respectively. Combined with SIW testing, a 3‐log 10 or 5‐log 10 seed treatment reduced the cases/year to 45 (95% CI 10–146) or <1 (95% CI <1 – 1.5), respectively. If the SIW coverage was less complete (i.e., less representative), a smaller risk reduction was predicted, e.g., a combined 3‐log 10 seed treatment and SIW testing with 20% coverage resulted in an estimated 92 (95% CI 22 – 298) cases/year. Analysis of alternative scenarios using different assumptions for key model inputs showed that the predicted relative risk reductions are robust. This risk assessment provides a comprehensive approach for evaluating the public health impact of various interventions in a sprout production system.

60 APPLIED LIFE SCIENCES↗

The Catalytic Reduction of Dinitrogen Under Mild Conditions (Final Report)

In order to use molecular hydrogen as an alternative to fossil fuels, large quantities of hydrogen (or protons and electrons) would have to be generated from water using a method based on solar energy and stored as a molecule in which hydrogen is a high weight percentage. The hydrogen must then be generated as needed from the form in which it is stored. An attractive molecule for this purpose is ammonia (~17% hydrogen by weight). Among the many problems that must be addressed for a successful implementation of this approach in the long term is the reduction of nitrogen catalytically to ammonia with protons and electrons under mild conditions, a goal that is addressed in this proposal. The first abiological catalytic reduction of N 2 to NH 3 by protons and electrons under mild conditions (22 °C and 1 atm) employed molybdenum catalysts, [(HIPTNCH 2 CH 2 ) 3 N]Mo (HIPTN 3 N 3- ), where HIPT (hexaisopropylterphenyl) is 3,5- (2,4,6-i-Pr 3 C 6 H 2 ) 2 C 6 H 3 . A total of approximately four turnovers (to give a maximum of eight equivalents of ammonia) along with approximately one equivalent of hydrogen per N 2 reduced, were found. A limitation of this catalytic approach is loss of the ligand from the metal. This project is aimed at developing a complex that contains a ligand that will not be removed from the metal. A macrocyclic TREN-based ligand of this type has been synthesized recently. The project is aimed at making similar ligands and molybdenum complexes that contain them and testing the new catalysts for catalytic reduction of dinitrogen. The results of these investigations will help guide further design of ligands for more efficient reduction of nitrogen to ammonia and ultimately an integrated device in which protons and electrons are generated using solar energy and employed to reduce nitrogen to ammonia using molybdenum catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zeolite-promoted platinum catalyst for efficient reduction of nitrogen oxides with hydrogen

Internal combustion engine fueled by carbon-free hydrogen (H 2 -ICE) offers a promising alternative for sustainable transportation. Herein, we report a facile and universal strategy through the physical mixing of Pt catalyst with zeolites to significantly improve the catalytic performance in the selective catalytic reduction of nitrogen oxides (NO x ) with H 2 (H 2 -SCR), a process aiming at NO x removal from H 2 -ICE. Via the physical mixing of Pt/TiO 2 with Y zeolite (Pt/TiO 2 + Y), a remarkable enhancement of NO x reduction activity and N 2 selectivity was simultaneously achieved. The incorporation of Y zeolite effectively captured the in-situ generated water, fostering a water-rich environment surrounding the Pt active sites. This environment weakened the NO adsorption while concurrently promoting the H 2 activation, leading to the strikingly elevated H 2 -SCR activity and N 2 selectivity on Pt/TiO 2 + Y catalyst. This study provides a unique, easy and sustainable physical mixing approach to achieve proficient heterogeneous catalysis for environmental applications.

36 MATERIALS SCIENCE↗