Search NASA⌕ Search

SEARCH · Search NASA

Results for “Acceleration methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

BraggNN : fast X-ray Bragg peak analysis using deep learning

X-ray diffraction based microscopy techniques such as high-energy diffraction microscopy (HEDM) rely on knowledge of the position of diffraction peaks with high precision. These positions are typically computed by fitting the observed intensities in detector data to a theoretical peak shape such as pseudo-Voigt. As experiments become more complex and detector technologies evolve, the computational cost of such peak-shape fitting becomes the biggest hurdle to the rapid analysis required for real-time feedback in experiments. To this end, we propose BraggNN, a deep-learning based method that can determine peak positions much more rapidly than conventional pseudo-Voigt peak fitting. When applied to a test dataset, peak center-of-mass positions obtained from BraggNN deviate less than 0.29 and 0.57 pixels for 75 and 95% of the peaks, respectively, from positions obtained using conventional pseudo-Voigt fitting (Euclidean distance). When applied to a real experimental dataset and using grain positions from near-field HEDM reconstruction as ground-truth, grain positions using BraggNN result in 15% smaller errors compared with those calculated using pseudo-Voigt. Recent advances in deep-learning method implementations and special-purpose model inference accelerators allow BraggNN to deliver enormous performance improvements relative to the conventional method, running, for example, more than 200 times faster on a consumer-class GPU card with out-of-the-box software.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Explainable and Differentiable Reinforcement Learning for Multi-objective Optimization in Particle Accelerators

Operating particle accelerators involves optimizing multiple goals simultaneously, which can be challenging due to trade-offs among objectives. While evolutionary algorithms like the genetic algorithm (GA) have been used for various Multi-Objective Optimization (MOO) tasks, they are not inherently suited for complex control problems. This talk highlights two variations of Reinforcement Learning (RL) for concurrently optimizing heat load and trip rates at the Continuous Electron Beam Accelerator Facility (CEBAF). The problem involves strict constraints on individual states, actions, and overall energy requirements of the beam. First, this talk highlights how differentiability can be harnessed through a Deep Differentiable Reinforcement Learning (DDRL) approach to address MOO issues within particle accelerators. We examine the DDRL method alongside Model Free Reinforcement Learning (MFRL), GA, and Bayesian Optimization (BO). The performance of these methods is assessed by generating a Pareto-front for two objectives. Our findings indicate that DDRL excels in handling high-dimensional problems more effectively than MFRL, BO, and GA. Next, we will show integration of explainable physics-based constraints into RL algorithms to enhance trans- parency and trust in decision-making processes by enabling users to verify that agents adhere to established physical principles. This surrogate function can be modeled using neural networks or sparse dictionary mod- els. By examining the mathematical form of the learned constraint function, we are able to confirm the agent has learned to use the established physics of each environment provided but the surrogate model. In addi- tion, we find that the introduction of a mathematical functional dictionary based surrogate model enables our reinforcement learning algorithms to reliably converge for difficult high-dimensional accelerator controls environments.

Rajput, Kishansingh [Thomas Jefferson National Acc↗
DOE OSTI2023

Improved measurements of nonlinear integrable optics at IOTA

Nonlinear integrable optics (NIO) are a promising novel approach at improving the stability of high intensity beams. Implementations of NIO based on specialized magnetic elements are being tested at the Integrable Optics Test Accelerator (IOTA) at Fermilab. One method of verifying proper implementation of these solutions is by measuring the analytic invariants predicted by theory. The initial measurements of nonlinear invariants were performed during IOTA run in 2019/20, however the covid-19 pandemic prevented the full-scale experimental program from being completed. Several important improvements were implemented in IOTA for the 2022/23 run, including the operation at higher beam energy of 150 MeV, improved optics control, and chromaticity correction. This report presents on the improved calibrations of the NIO for nonlinear invariant measurements.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Improved Measurements of Nonlinear Integrable Optics Invariants at IOTA

Nonlinear integrable optics (NIO) are a promising novel approach at improving the stability of high intensity beams. Implementations of NIO based on specialized magnetic elements are being tested at the Integrable Optics Test Accelerator (IOTA) at Fermilab. One method of verifying proper implementation of these solutions is by measuring the analytic invariants predicted by theory. The initial measurements of nonlinear invariants were performed during IOTA run in 2019/20, however the covid-19 pandemic prevented the full-scale experimental program from being completed. Several important improvements were implemented in IOTA for the 2022/23 run, including the operation at higher beam energy of 150 MeV, improved optics control, and chromaticity correction. This report presents the results of improved measurements of nonlinear invariants.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Surrogate optimization of variational quantum circuits

Variational quantum eigensolvers are touted as a near-term algorithm capable of impacting many applications. However, the potential has not yet been realized, with few claims of quantum advantage and high resource estimates, especially due to the need for optimization in the presence of noise. Finding algorithms and methods to improve convergence is important to accelerate the capabilities of near-term hardware for VQE or more broad applications of hybrid methods in which optimization is required. To this goal, we look to use modern approaches developed in circuit simulations and stochastic classical optimization, which can be combined to form a surrogate optimization approach to quantum circuits. Using an approximate (classical CPU/GPU) state vector simulator as a surrogate model, we efficiently calculate an approximate Hessian, passed as an input for a quantum processing unit or exact circuit simulator. This method will lend itself well to parallelization across quantum processing units. We demonstrate the capabilities of such an approach with and without sampling noise and a proof-of-principle demonstration on a quantum processing unit utilizing 40 qubits.

Gustafson, Erik J. [RIACS, Mtn. View] (ORCID:00000↗
DOE OSTI2021

Methods for Precision Studies of Neutrino Interactions

Accelerator neutrino oscillation experiments provide a sensitive way to investigatea number of major open questions in neutrino physics. To achieve precision neutrinooscillation measurements, we need a good understanding of key aspects of the experiments,such as the detection technologies used and neutrino interactions at few-GeV energies.The MicroBooNE experiment has advanced the development of technologies for LArTPCs.An ultra-violet laser system was introduced to MicroBooNE in order to measure theelectric field in situ, which plays a central role in the formation of charge and lightsignals in LArTPCs. This thesis describes the setup and operation of the laser system. Ideveloped a general methodology to measure the electric field and the consequent spatialdistortion in LArTPCs, which supports precision measurements in accelerator neutrinooscillation experiments. In MicroBooNE, the measured electric field distortions are upto 15 ± 3 % with respect to the nominal value, and the measured spatial distortions areup to 15 ± 3 cm. The result of the electric field measurement is applied to the detectorsimulation and the event reconstruction, which leads to a better detector characterizationfor neutrino analyses. A significant concern for measurements of neutrino interactions ismodel dependence, as the currently available models are not sufficient for describing thepicture of neutrino interacting at few-GeV energies. In this thesis, I developed a detailedstrategy for a model-independent cross-section measurement at low energy transfers,where the available model predictions do not agree with the inclusive measurementsfrom multiple experiments. A likelihood fit technique for cross-section extraction isrealized in an accelerator neutrino experiment using a LArTPC for the first time. Thetreatment of systematic uncertainties developed in this thesis is generally applicable foranalyses using similar fitting techniques. This neutrino interaction study at low energytransfers provides a probe to the poorly understood region of neutrino cross sections. Themeasurement scheme developed here aims to guide future model-independent cross-sectionmeasurements, particularly for neutrino experiments using LArTPCs.

Chen, Yifan↗
DOE OSTI2024

Linac_Gen: Integrating Machine Learning and Particle-in-Cell Methods for Enhanced Beam Dynamics at Fermilab

Here, we introduce Linac_Gen, a tool developed at Fermilab, which combines machine learning algorithms with Particle-in-Cell methods to advance beam dynamics in linacs. Linac_Gen employs techniques such as Random Forest, Genetic Algorithms, Support Vector Machines, and Neural Networks, achieving a tenfold increase in speed for phase-space matching in Linacs over traditional methods, through the use of genetic algorithms. Crucially, Linac_Gen's adept handling of 3D field maps elevates the precision and realism in simulating beam instabilities and resonances, marking a key advancement in the field. Benchmarked against established codes, Linac_Gen demonstrates not only improved efficiency and precision in beam dynamics studies but also in the design and optimization of Linac systems, as evidenced in its application to Fermilab's PIP-II Linac project. This work represents a notable advancement in accelerator physics, marrying ML with PIC methods to set new standards for efficiency and accuracy in accelerator design and research. Linac_Gen exemplifies a novel approach in accelerator technology, offering substantial improvements in both theoretical and practical aspects of beam dynamics.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Linac_Gen: integrating machine learning and particle-in-cell methods for enhanced beam dynamics at Fermilab

Here, we introduce Linac_Gen, a tool developed at Fermilab, which combines machine learning algorithms with Particle-in-Cell methods to advance beam dynamics in linacs. Linac_Gen employs techniques such as Random Forest, Genetic Algorithms, Support Vector Machines, and Neural Networks, achieving a tenfold increase in speed for phase-space matching in linacs over traditional methods through the use of genetic algorithms. Crucially, Linac_Gen's adept handling of 3D field maps elevates the precision and realism in simulating beam instabilities and resonances, marking a key advancement in the field. Benchmarked against established codes, Linac_Gen demonstrates not only improved efficiency and precision in beam dynamics studies but also in the design and optimization of linac systems, as evidenced in its application to Fermilab's PIP-II linac project. This work represents a notable advancement in accelerator physics, marrying ML with PIC methods to set new standards for efficiency and accuracy in accelerator design and research. Linac_Gen exemplifies a novel approach in accelerator technology, offering substantial improvements in both theoretical and practical aspects of beam dynamics.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Harvesting Isotopically Pure Ac-225 from Ra-225 Produced in Thorium Target Spallation Reaction

A method for isolating Ra-225 from linear accelerator irradiated Th metal chemical processing waste streams has been established. Separating Ra-225 from the complex matrix following proton irradiation of Th metal provides a source of isotopically pure Ac-225 free of the Ac-227 impurity that is present in accelerator-produced Ac-225. Ra isotopes are first separated from the irradiated Th target via cation exchange methods. Importantly, the Ra-containing fraction is cleaned from residual citrate via dilute nitric acid washes (0.5 M) on AG50W-X8 resin. The mixed Ra isotopes are then further purified from Ba-140 impurity using a Sr resin column. Ra elutes through the resin with successive washes of 2.5 M HNO 3 while Ba-140 is retained. Ac-225 is then harvested by loading the Ra content onto an AG50W-X8 cation exchange column where the Ra-225 parent is eluted with 2.5 M HNO 3 before the Ac-225 daughter is eluted with 8 M HNO 3 .

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2022

A substandard candle: the low-$$\nu $$ method at few-GeV neutrino energies

Abstract As accelerator-based neutrino oscillation experiments improve oscillation parameter constraints with more data, control over systematic uncertainties on the incoming neutrino flux and interaction models is increasingly important. The intense beams offered by modern experiments permit a variety of options to constrain the flux using in situ “standard candle” measurements. These standard candles must use very well understood interaction processes to avoid introducing additional interaction model dependence. One option often discussed in this context is the “low- $$\nu $$ ν ” method, which is designed to isolate neutrino interactions where there is low energy-transfer to the nucleus, such that the interaction cross section is expected to be approximately constant as a function of neutrino energy. The shape of the low-energy transfer event sample can then be used to extract the flux shape. Applications of the method at high neutrino energies (many tens of GeV) are well understood. However, the applicability of the method at the lower energies of current and future few-GeV accelerator neutrino experiments remains unclear due to the presence of nuclear and form-factor effects inherent in the interaction models.In this analysis we examine the prospects for improving constraints on the accelerator neutrino fluxes in situ with the low- $$\nu $$ ν method in an experiment-independent way, using (anti)neutrino interactions on argon and hydrocarbon targets from the GENIE, NEUT, NuWro and GiBUU event generators. We begin by investigating the extent to which deviations from the constant cross-section assumption are dependent on poorly understood aspects of the neutrino interaction model. We then assess whether a low energy-transfer event sample can be confidently identified using experimentally accessible observables. We finally consider how the practicalities of reconstructing the energy spectrum of interacting neutrinos in realistic detectors might further limit the utility of low- $$\nu $$ ν flux constraints. The results show that flux constraints from the low- $$\nu $$ ν method would be severely dependent on the interaction model assumptions used in an analysis of neutrinos with energies below 5 GeV, and anti-neutrinos below at least 15 GeV. The spread of model predictions show that a low- $$\nu $$ ν analysis is unlikely to offer much improvement on typical neutrino flux uncertainties, even with a perfect detector. Notably—running counter to the assumption inherent to the low- $$\nu $$ ν method—the model-dependence increases with decreasing energy transfer for experiments in the few-GeV region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Fast Approximate Methods for Modified Gravity Cosmological Simulations

The accelerated expansion of the Universe poses a major theoretical puzzle. Although the assumption of a non-zero cosmological constant provides a minimal extension of general relativity that is consistent with observational data, many theories of modified gravity have been suggested as possible alternatives. Predictions of structure formation for these models in the fully nonlinear regime are very expensive and it is difficult, if not impossible, to explore such a huge space of models and parameters using high-resolution N-body simulations. Even in the mildly nonlinear regime, perturbative methods can become extremely complex. We explore whether simplified dynamical approximations, applicable for a certain set of cosmological probes, can be used to investigate models of modified gravity with acceptable accuracy in the latter instance. For the case of chameleon gravity, we find that these methods can indeed be used to explore the region around the baryon acoustic oscillation scale, k ~ 0:1 hMpc-1 but not much further.

cosmology↗
DOE OSTI2020

PASSAT: particle accelerator helioScopes for Slim Axion-like-particle deTection

We propose a novel method to search for axion-like particles (ALPs) at particle accelerator experiments. ALPs produced at the target via the Primakoff effect subsequently enter a region with a magnetic field, where they are converted to photons that are then detected. Dubbed Particle Accelerator helioScopes for Slim Axion-like-particle deTection (PASSAT), our proposal uses the principle of the axion helioscope but replaces ALPs produced in the Sun with those produced in a target material. Since we rely on ALP-photon conversions , our proposal probes light (slim) ALPs that are otherwise inaccessible to laboratory-based experiments which rely on ALP decay, and complements astrophysical probes that are more model-dependent. As a first application, we reinterpret existing data from the NOMAD experiment in light of PASSAT, and constrain the parameter space for ALPs lighter than $$\sim 100~\mathrm{eV}$$ ~ 100 eV and ALP-photon coupling larger than $$\sim 10^{-4}~\mathrm{GeV}^{-1}$$ ~ 10 - 4 GeV - 1 . As benchmarks of feasible low-cost experiments improving over the NOMAD limits, we study the possibility of re-using the magnets of the CAST and the proposed BabyIAXO experiments and placing them at the proposed BDF facility at CERN, together with some new detectors. We find that these realizations of PASSAT allow for a direct probe of the parameter space for ALPs lighter than $$\sim 100~\mathrm{eV}$$ ~ 100 eV and ALP-photon coupling larger than $$\sim 4\times 10^{-6}~\mathrm{GeV}^{-1}$$ ~ 4 × 10 - 6 GeV - 1 , which are regions that have not been probed yet by experiments with laboratory-produced ALPs. In contrast to other proposals aiming at detecting single or two-photon only events in hadronic beam dump environments, that rely heavily on Monte Carlo simulations, the background in our proposal can be directly measured in-situ , its suppression optimized, and the irreducible background statistically subtracted. Sensitivity evaluations with other beams will be the subject of a future paper. The measurements suggested in this paper represent an additional physics case for the BDF at CERN beyond those already proposed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Multi-task Parallelism for Robust Pre-training of Graph Foundation Models on Multi-source, Multi-fidelity Atomistic Modeling Data

Graph foundation models using graph neural networks promise sustainable, efficient atomistic modeling. To tackle challenges of processing multi-source, multi-fidelity data during pre-training, recent studies employ multi-task learning, in which shared message passing layers initially process input atomistic structures regardless of source, then route them to multiple decoding heads that predict data-specific outputs. This approach stabilizes pre-training and enhances a model’s transferability to unexplored chemical regions. Preliminary results on approximately four million structures are encouraging, yet questions remain about generalizability to larger, more diverse datasets and scalability on supercomputers. We propose a multi-task parallelism method that distributes each head across computing resources with GPU acceleration. Implemented in the open-source HydraGNN architecture, our method was trained on over 24 million structures from five datasets and tested on the Perlmutter, Aurora, and Frontier supercomputers, demonstrating efficient scaling on all three highly heterogeneous super-computing architectures.

Lupo Pasini, Massimiliano [ORNL] (ORCID:0000000249↗
DOE OSTI2023

A combined ensemble-volume average homogenization method for lattice structures with defects under dynamic and static loading

In the study of lattices structures, both experiments and numerical simulations are often conducted with small samples. Using combined ensemble and volume averaging, this work introduces a method to extract a macroscopic constitutive response of a lattice material from numerical simulations performed in periodic domains. The domain size needed to obtain statistically accurate results is investigated. Similar to molecular dynamics, the concept of the virial stress is introduced after homogenized equations are derived using the ensemble averaging method. Under static conditions, the virial stress is shown to agree with the volume averaged solid stress. Using the homogenization method, constitutive relations for this stress can be obtained from systems with uniform strains. Application of such obtained constitutive relations to more general cases results in an error proportional to the square of the ratio between the lattice length scale and the macroscopic length scale. Taking advantage of this property, numerical simulations are performed in systems with a uniform gradient of the average velocity. The volume average method is then used to accelerate convergence when studying lattices with defects. To avoid the artificial numerical time scale from the size of a representative volume element divided by the wave speed, a numerical scheme is developed to enforce a spatially uniform velocity gradient within the computational domain while allowing fluctuations of the velocity or displacement to develop naturally. To account for probability distribution of lattice defects, the stress is calculated as the ensemble-volume averaged value. For dynamic systems, energy dissipation properties are also studied.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A quadratic programming flux correction method for high-order DG discretizations of S transport

In this work, we present a new flux-fixup approach for arbitrarily high-order discontinuous Galerkin (DG) discretizations of the S N transport equation, and we demonstrate the compatibility of this approach with the Variable Eddington Factor (VEF) method. The new fixup approach is sweep-compatible: during a transport sweep (block Gauss-Seidel iteration in which the scattering source is lagged), a local quadratic programming (QP) problem is solved in each spatial element to ensure that the solution satisfies certain physical constraints, including local particle balance. In this paper, we describe two choices of physical constraints, resulting in two variants of the method: QP Zero (QPZ) and QP Maximum Principle (QPMP). In QPZ, the finite element coefficients of the solution are constrained to be nonnegative. In QPMP, they are constrained to adhere to an approximate discrete maximum principle. There are two primary takeaways in this paper. First, when the positive Bernstein basis is used for DG discretization, the QPMP method eliminates negativities, preserves high-order accuracy for smooth problems, and significantly dampens unphysical oscillations in the solution. The latter feature – the dampening of unphysical oscillations – is an improvement upon standard, simpler fixup approaches such as the approach described in (denoted as the “zero and rescale” (ZR) method in this paper). This improvement comes at a moderate computational cost, but it is not prohibitive. Our results show that, even in an unrealistic worst-case scenario where 83% of the spatial elements require a fixup, the computational cost of performing a transport sweep with fixup is only ~31% greater than performing one without fixup. The second takeaway is that the VEF method can be used to accelerate the convergence of transport sweeps even when a fixup is applied. When optically thick regions are present, transport sweeps converge slowly, regardless of whether a fixup is applied, and acceleration is needed. However, attempting to apply standard diffusion synthetic acceleration (DSA) to fixed-up transport sweeps results in divergence for optically thick problems. Our results show that the same is not true for VEF. When VEF is combined with fixed-up transport sweeps, the result is a scheme that produces a nonnegative solution, converges independently of the mean free path, and, in the case of the QPMP fixup, adheres to an approximate discrete maximum principle.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Heuristics for Molten-Salt Synthesis of Single-Crystalline Ultrahigh-Nickel Layered Oxide Cathodes

In pursuit of Li-ion batteries with higher energy density, ultrahigh-nickel layered oxides are a leading candidate for next-generation cathode materials. Single-crystalline morphology offers a neat solution to the poor stability of ultrahigh-Ni cathodes; a lower active surface area mitigates electrolyte decomposition at high voltages, and the elimination of grain boundaries improves mechanical resilience and increases volumetric energy density. However, single-crystal cathodes possess their own challenges, several of which originate from synthesis at elevated temperatures meant to induce grain growth. Molten-salt synthesis is an alternative method for obtaining single crystals, accelerating grain growth through the presence of a molten flux without the need for increased temperature. Herein, we offer heuristic guidelines for molten-salt synthesis, discussing key factors for designing reaction mixtures and the necessary exploratory research for novel molten salt/cathode systems. Here, the influence of different salts and synthesis conditions on the morphology and properties of single-crystal LiNiO 2 is presented. It is found that oxidative salts, such as Li 2 O 2 and LiNO 3 , are crucial to supplementing dissolution of gaseous oxygen into the molten phase. Through these discussions, this work aims to provide a set of overarching principles for obtaining higher-quality single-crystal layered oxide cathodes and engender more rigorous and impactful investigation into their fundamental nature and applications.

25 ENERGY STORAGE↗
DOE OSTI2026

Bayesian Optimization of Catalysis with In-Context Learning

Large language models (LLMs) can perform accurate classification with zero or few examples through in-context learning (ICL), allowing the model to observe query-relevant examples at inference time and eliminating the need for additional weight updates to generalize beyond its original training data. We extend this capability to regression with uncertainty estimation using frozen LLMs (e.g., GPT-4o, Gemini), enabling Bayesian optimization (BO) in natural language without explicit model training or feature engineering. We apply this to materials discovery by representing materials as synthesis and testing procedures for use in natural language prompts. This Bayesian, design-first approach prioritizes optimization toward target material properties before detailed characterization, in contrast to conventional experimental workflows that often emphasize characterization of suboptimal materials. On benchmarks like aqueous solubility and oxidative coupling of methane (OCM), BO-ICL matches or outperforms Gaussian processes. In live experiments on the reverse water–gas shift (RWGS) reaction, BO-ICL identifies multimetallic catalysts that approach equilibrium CO yield within 6 and 10 iterations from a pool of 3,700 and 360,000 candidates, respectively. Our method redefines materials representation and accelerates discovery, with broad applications across catalysis, materials science, and AI.

Calibration↗