Search NASA⌕ Search

SEARCH · Search NASA

Results for “Accelerators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Reach performance while wearing the Space Shuttle launch and entry suit during exposure to launch accelerations

Crewmen aboard the Space Shuttle are subjected to accelerations during ascent (the powered flight phase of launch) which range up to +3 G(sub x). Despite having 33 missions and nine years experience, not to mention all the time spent in development prior to the first flight, no truly quantitative reach study wearing actual crew equipment, using actual Shuttle seats and restraints has ever been done. What little information exists on reach performance while under acceleration has been derived primarily from subjective comments gathered retrospectively from Shuttle flight crews during their post mission debrief. This lack of reach performance data has resulted in uncertainty regarding emergency procedures that can realistically be performed during and actual Shuttle ascent versus what is practiced in the ground-fixed and motion-based Shuttle Simulators. With the introduction on STS-26 of the current Shuttle escape system, the question of reach performance under launch accelerations was once again raised. The escape system's requirement that each crewman wear a Launch/Entry Suit (LES), parachute harness, and parachute were all anticipated to contribute to a further degradation of reach performance during Shuttle ascent accelerations. In order to answer the reach performance question in a quantitative way, a photogrammetric method was chosen so that the actual reach values and associated envelopes could be captured. This would allow quantitative assessment of potential task performance impact and identify areas where changes to our Shuttle ascent emergency procedures might be required. Also, such a set of reach values would be valid for any similar acceleration profile using the same crew equipment. Potential Space Station applications of this data include predicting reach performance during Assured Crew Return Vehicle (ACRV) operations.

Bagian, James P.↗
NASA NTRS1994

Summary Report of Mission Acceleration Measurements for STS-62, Launched 4 March 1994

The second mission of the United States Microgravity Payload on-board the STS-62 mission was supported with three accelerometer instruments: the Orbital Acceleration Research Experiment (OARE) and two units of the Space Acceleration Measurements System (SAMS). The March 4, 1994 launch was the fourth successful mission for OARE and the ninth successful mission for SAMS. The OARE instrument utilizes a sensor for very low frequency measurements below one Hertz. The accelerations in this frequency range are typically referred to as quasisteady accelerations. One of the SAMS units had two remote triaxial sensor heads mounted on the forward MPESS structure between two furnance experiments, MEPHISTO and AADSF. These triaxial heads had low-pass filter cut-off frequencies at 10 and 25 Hz. The other SAMS unit utilized three remote triaxial sensor heads. Two of the sensor heads were mounted on the aft MPESS structure between the two experiments IDGE and ZENO. These triaxial heads had low-pass filter cut-off frequencies at 10 and 25 Hz. The third sensor head was mounted on the thermostat housing inside the IDGE experiment container. This triaxial head had a low-pass filter cut-off frequency at 5 Hz. This report is prepared to furnish interested experiment investigators with a guide to evaluating the acceleration environment during STS-62 and as a means of identifying areas which require further study. To achieve this purpose, various pieces of information are included, such as an overview of the STS-62 mission, a description of the accelerometer system flown on STS-62, some specific analysis of the accelerometer data in relation to the various mission activities, and an overview of the low-gravity environment during the entire mission. An evaluation form is included at the end of the report to solicit users' comments about the usefulness of this series of reports.

Rogers, Melissa J. B.↗
NASA NTRS1995

Estimates of effects of residual acceleration on USML-1 experiments

The purpose of this study effort was to develop analytical models to describe the effects of residual accelerations on the experiments to be carried on the first U.S. Microgravity Lab mission (USML-1) and to test the accuracy of these models by comparing the pre-flight predicted effects with the post-flight measured effects. After surveying the experiments to be performed on USML-1, it became evident that the anticipated residual accelerations during the USML-1 mission were well below the threshold for most of the primary experiments and all of the secondary (Glovebox) experiments and that the only set of experiments that could provide quantifiable effects, and thus provide a definitive test of the analytical models, were the three melt growth experiments using the Bridgman-Stockbarger type Crystal Growth Furnace (CGF). This class of experiments is by far the most sensitive to low level quasi-steady accelerations that are unavoidable on space craft operating in low earth orbit. Because of this, they have been the drivers for the acceleration requirements imposed on the Space Station. Therefore, it is appropriate that the models on which these requirements are based are tested experimentally. Also, since solidification proceeds directionally over a long period of time, the solidified ingot provides a more or less continuous record of the effects from acceleration disturbances.

Naumann, Robert J.↗
NASA NTRS1994

Coherent-phase or random-phase acceleration of electron beams in solar flares

Time structures of electron beam signatures at radio wavelengths are investigated to probe correlated versus random behavior in solar flares. In particular we address the issue whether acceleration and injection of electron beams is coherently modulated by a single source, or whether the injection is driven by a stochastic (possibly spatially fragmented) process. We analyze a total of approximately = 6000 type III bursts observed by Ikarus (Zurich) in the frequency range of 100-500 MHz, during 359 solar flares with simultaneous greater than or = 25 keV hard X-ray emission, in the years 1890-1983. In 155 flares we find a total of 260 continuous type III groups, with an average number of 13 +/- 9 bursts per group, a mean duration of D = 12 +/- 14 s, a mean period of P = 2.0 +/- 1.2 s, with the highest burst rate at a frequency of nu = 310 +/- 120 MHz. Pulse periods have been measured between 0.5 and 10 s, and can be described by an exponential distribution, i.e., N(P) varies as e (exp -P/1.0s). The period shows a frequency dependence of P(nu)=46(exp-0.6)(sub MHz)s for different flares, but is invariant during a particular flare. We measure the mean period P and its standard deviation sigma (sub p) in each type III group, and quantify the degree of periodicity (or phase-coherence) by the dimensionless parameter sigma (sub p)P. The representative sample of 260 type III burst groups shows a mean periodicity of sigma (sub p/P) = 0.37 +/- 0.12, while Monte Carlo simulations of an equivalent set of truly random time series show a distinctly different value of sigma (sub p)P = 0.93 +/- 0.26. This result indicates that the injection of electron beams is coherently modulated by a particle acceleration source which is either compact or has a global organization on a timescale of seconds, in contrast to an incoherent acceleration source, which is stochastic either in time or space. We discuss the constraints on the size of the acceleration region resulting from electron beam propagation delays and from Alfvenic synchronization during a pulse period. We discuss two periodic preocesses in flares, which potentially control quasi-periodic particle acceleration: (1) MHD oscillations, and (2) current sheets with oscillatory dynamics.

Aschwanden, Markus J.↗
NASA NTRS1994

Electron distribution function behavior during localized transverse ion acceleration events in the topside auroral zone

The Topaz3 auroral sounding rocket made the following observations concerning the transfer of precipitating auroral electron energy to transverse ion acceleration in the topside auroral zone. During the course of the flight, the precipitating electron beam was modified to varying degrees by interaction with VLF hiss, at times changing the beam into a field-aligned plateau. The electron distribution functions throughout the flight are classified according to the extent of this modification, and correspondences with ion acceleration events are sought. The hiss power during most of this rocket flight apparently exceeded the threshold for collapse into solitary structures. At the times of plateaued electron distributions, the collapse of these structures was limited by Landau damping through the ambient ions, resulting in a velocity-dependent acceleration of both protons and oxygen. This initial acceleration is sufficient to supply the number flux of upflowing ions observed at satellite altitudes. The bursty ion acceleration was anticorrelated, on 1-s or smaller timescales, with dispersive bursts of precipitating field-aligned electrons, although on longer timescales the bursty ions and the bursty electrons are correlated.

Lynch, K. A.↗
NASA NTRS1994

A new path for the electron bulk energization in solar flares: Fermi acceleration by magnetohydrodynamic turbulence in reconnection outflows

We recently proposed that a magnetohydrodynamic (MHD) turbulent cascade produces the bulk energization of electrons to approximately 25 keV in the impulsive phase of solar flares (LaRosa & Moore 1993). In that scenario, (1) the cascading MHD turbulence is fed by shear-unstable Alfvenic outflows from sites of strongly driven reconnection in the low corona, and (2) the electrons are energized by absorbing the energy that flows down through the cascade. We did not specify the physical mechanism by which the cascading energy is ultimately transferred to the electrons. Here we propose that Fermi acceleration is this mechanism, the process by which the electrons are energized and by which the cascading MHD turbulence is dissipated. We point out that in the expected cascade MHD fluctuations of scale 1 km can Fermi-accelerate electrons from 0.1 keV to approximately 25 keV on the subsecond timescales observed in impulsive flares, provided there is sufficient trapping and scattering of electrons in the MHD turbulence. We show that these same fluctuations provide the required trapping; they confine the electrons within the turbulent region until the turbulence eis dissipated. This results in the energization of all of the lectrons in each large-scale (5 x 10(exp 7)cm) turbulent eddy to 25 keV. The Fermi process also requires efficient scattering so that the pitch-angle distribution of the accelerating electrons remains isotropic. We propose that the electrons undergo resonant scattering by high-frequency plasma R-waves that, as suggested by others (Hamilton & Petrosian 1992), are generated by the reconnection. Ions are not scattered by R-waves. Provided that there is negligible generation of ion-scattering plasma turbulence (e.g., L-waves) by the reconnection or the MHD turbulence, the ions will not Fermi-accelerate and the cascading energy is transferred only to the electrons. We conclude that, given this situation, electron Fermi acceleration can plausibly account for the electron bulk energization in impulsive solar flares.

Larosa, T. N.↗
NASA NTRS1994

The role of radiative acceleration in outflows from broad absorption line QSOs. 1: Comparison with O star winds

We investigate the role of radiation pressure in accelerating the broad absorption line (BAL) outflows in QSOs by comparing their properties with those of radiatively driven O star winds. We find that, owing to their lower column densities and higher velocity spreads, BAL outflows have only a few tens of strong resonance lines that are dynamically important, as compared with 10(exp 3) - 10(exp 4) lines in O star winds. We show that the combined radiative force (the 'force multiplier') declines more rapidly as a function of column density for BAL outflows than for O star winds. This is mainly attributed to the absence of lines from excited states in the BAL region. The absorbing gas in BAL outflows must have a small filling factor in order for radiative acceleration to be important dynamically. This allows the absorbing material to remain at a high enough density to maintain the ion species necessary for efficient radiative acceleration as well (as those responsible for the observed absorption), without the average flow density becoming so large that the absorbing matter cannot be accelerated by an increment larger than its own sound speed. The latter condition is necessary if the outflow is to tap a large portion of the incident photon momentum. Once a small filling factor is assumed, radiative acceleration can be more efficient in BAL outflows than in O stars. We show that terminal velocities of a few times 10(exp 4) km/sec can be expected, provided that the absorbing matter does not have to drag with it a much heavier substrate.

Arav, Nahum↗
NASA NTRS1994

Radiative acceleration in outflows from broad absorption line quasi-stellar objects. 2: Wind models

We investigate the dynamics of radiatively driven broad absorption-line (BAL) outflows in quasi-stellar objects (QSOs) by developing radial and time-independent numerical models. Two limits are explored. The first assumes that the absorbing matter is not forced to comove with the substrate, which provides pressure confinement. This assumption allows us to explore in detail a case in which the acceleration is entirely due to radiation pressure. Using the parameters inferred from observations, we find that under these conditions radiative acceleration (mainly due to resonance line scattering) can readily accelerate the flow to the observed velocities. An important feature of the noncoupled flow is that the line profiles tend to stay relatively flat throughout the velocity interval covered by the line. We discuss how relaxing the assumptions of radial symmetry and time independent may help to explain the structures observed in BALs. In the second class of models, the absorbing flow is assumed to be completely coupled to the substrate in which it is embedded. Aside from being more plausible physically, these models produce line profiles that trail off at higher velocities, a behavior observed in some BALs. We show that, even if the substrate is massless, we have to assume a starting radius very close to the inferred radius of the broad emission-line region (approximately 0.1 pc) in order to obtain a significant contribution from radiative acceleration, given a typical active galactic nucleus (AGN) spectrum. The reason is that the energy input needed to pressurize the substrate, allowing the flow to become supersonic and to retain a reasonable ionization equilibrium, at the same time contributes appreciably to the acceleration. A way to relax the small starting radius constraint is to use a softer ionizing spectrum.

Arav, Nahum↗
NASA NTRS1994

Cosmic bullets as particle accelerators and radio sources

We have simulated in two dimensions the dynamical evolution of dense gas clouds(`cosmic bullets') moving supersonically through a uniform low-density medium. The diffusive shock acceleration of relativistic protons (cosmic rays) and their dynamical feedback on the background flow are included by the two-fluid model for this process. The acceleration of relativistic electrons is approximated by a test-particle model, and a passive magnetic field is followed by a simple advection scheme. Strong bow shocks, with Mach numbers similar to that of a bullet's motion, are the most important particle accelerators in the flow, while tail shocks and shocks inside the bullets do not play generally significant roles in this regard. For our simulation parameters, approximately greater than 10% of the initial bullet kinetic energy is converted to a combination of internal energy of gas and cosmic-ray protons by the time the bullets begin to be disrupted. Characteristically, the cosmic rays gain several percent of the available kinetic energy. Bullet destruction on timescales only a little larger than the ram pressure bullet crushing time begins in response to Kelvin-Helmholtz and especially to Rayleigh-Taylor instabilities along the forward bullet surface. For dense bullets this happens before the bullet is stopped by ram pressure. According to our simple model for synchrotron emission from relativistic electrons accelerated and transported within the flows, that emission increases rapidly as the bullet begins to fragment, when it is strongly dominated by field enhancement in sheared flows. Synchrotron emission from the acceleration region within the bow shock is, by contrast, much weaker.

Jones, T. W.↗
NASA NTRS1989

Electrostatic Plasma Accelerator (EPA)

The Electrostatic Plasma Accelerator (EPA) is a thruster concept which promises specific impulse levels between low power arcjets and those of the ion engine while retaining the relative simplicity of the arcjet. The EPA thruster produces thrust through the electrostatic acceleration of a moderately dense plasma. No accelerating electrodes are used and the specific impulse is a direct function of the applied discharge voltage and the propellant atomic mass. The goal of the present program is to demonstrate feasibility of the EPA thruster concept through experimental and theoretical investigations of the EPA acceleration mechanism and discharge chamber performance. Experimental investigations will include operating the test bed ion (TBI) engine as an EPA thruster and parametrically varying the thruster geometry and operating conditions to quantify the electrostatic plasma acceleration effect. The theoretical investigations will include the development of a discharge chamber model which describes the relationships between the engine size, plasma properties, and overall performance. For the EPA thruster to be a viable propulsion concept, overall thruster efficiencies approaching 30% with specific impulses approaching 1000 s must be achieved.

Brophy, John R.↗
NASA NTRS1996

Experimental Investigation of the Effects of Acceleration on Heat Transfer in the Turbulent Boundary Layer

The objective of this research was to experimentally investigate the combined effects of freestream acceleration and surface roughness on heat transfer and fluid flow in the turbulent boundary layer. The experiments included a variety of flow conditions ranging from aerodynamically smooth to transitionally rough to fully rough boundary layers with accelerations ranging from moderate to moderately strong. The test surfaces used were a smooth-wall test surface and two rough-wall surfaces which were roughened with 1.27 mm diameter hemispheres spaced 2 and 4 base diameters apart in a staggered array. The measurements consisted of Stanton number distributions, mean temperature profiles, skin friction distributions, mean velocity profiles, turbulence intensity profiles, and Reynolds stress profiles. The Stanton numbers for the rough-wall experiments increased with acceleration. For aerodynamically smooth and transitionally rough boundary layers, the effect of roughness is not seen immediately at the beginning of the accelerated region as it is for fully rough boundary layers; however, as the boundery layer thins under acceleration, the surface becomes relatively rougher resulting in a sharp increase in Stanton number.

Chakroun, Walid M.↗
NASA NTRS1995

Baffle Effect on Sloshing-Modulated Torques Responsed to Orbital Accelerations in Microgravity

The behavior of sloshing-dynamics-modulated fluid systems driven by orbital accelerations including gravity gradient and jitter accelerations has been studied. Partly liquid-filled rotating Dewars applicable to a full-scale Gravity Probe-B Spacecraft container with and without baffle are considered. Results show that a slosh wave excited along the liquid-vapor interface induced by jitter-acceleration-dominated orbital accelerations provides a torsional moment with an up-and-down movement of bubble oscillations in the rotating Dewar. The fluctuations of fluid forces and fluid moment (torque) exerted on the Dewar wall of the container caused by slosh-wave excitation driven by orbital accelerations are also investigated. Since the viscous force across a liquid-solid interface and the surface-tension force across a liquid-vapor or liquid-solid interface can greatly contribute to the damping effect of slosh-wave excitation, a rotating Dewar with a baffle provides more areas of liquid-solid, and liquid-vapor, and solid-vapor interfaces than does a rotating Dewar without a baffle. Results show that the damping effect provided by the baffle reduces the amplitudes of force and moment feedback from the fluids to the container-in particular, the components of fluctuations transverse to the direction of the baffle boards.

Pan, H. L.↗
NASA NTRS1996

Effect of +Gz Acceleration on the Oxygen Uptake-Excercise Load Relationship during Lower Extremity Ergometer Excercise

Long term spaceflight and habitation of a space station and/or the moon require that astronauts be provided with sufficient environmental and physiological support so that they can not only function in microgravity but be returned to earth safely. As the duration of habitation in microgravity increase the effects of the concomitant deconditioning of body systems becomes a concern for added exercise in space and for reentry to Earth gravity. Many countermeasures have been proposed to maintain proper functioning of the body, but none have proved sufficient, especially when the cost of crew time spent in these activities is considered. The issue of appropriate countermeasures remains unresolved. Spaceflight deconditioning decreases tolerance to +Gz acceleration, head to foot, the direction which is experienced during reentry; the result is that the crew member is more prone to becoming pre-syncopal or syncopal, thus exacerbating the orthostatic intolerance. All ground-based research using microgravity analogues has produced this same lowered G tolerance. When intermittent exposure to +1 to +4 Gz acceleration training was used, some alleviation of orthosatic intolerance and negative physiological effects of deconditioning occurred. Exercise alone was not as effective; but the added G force was. The physiological responses to acceleration added to exercise training have not been clearly shown. We will test the hypothesis that there will be no difference in the exercise oxygen uptake-exercise load relationship with added +Gz acceleration. We wi also compare oxygen uptake during graded exercise-acceleration loads in the human-powered short arm centrifuge with those from normal supine exercise loads. The human-powered short arm centrifuge was built by NASA engineers at Ames Research Center.

Jackson, Catherine G. R.↗
NASA NTRS1996

Summary Report of Mission Acceleration Measurements for STS-75, Launched February 22, 1996

Two accelerometers provided acceleration data during the STS-75 mission in support of the third United States Microgravity Payload (USMP-3) experiments. The Orbital Acceleration Research Experiment (OARE) and the Space Acceleration Measurement System (SAMS) provided a measure of the microgravity environment of the Space Shuttle Columbia. The OARE provided investigators with quasi-steady acceleration measurements after about a six hour time lag dictated by downlink constraints. SAMS data were downlinked in near-real-time and recorded on-board for post-mission analysis. An overview of the mission is provided as are brief discussions of these two accelerometer systems. Data analysis techniques used to process SAMS and OARE data are discussed Using a combination of these techniques, the microgravity environment related to several different Orbiter, crew, and experiment operations is presented and interpreted. The microgravity environment represented by SAMS and OARE data is comparable to the environments measured by the instruments on earlier microgravity science missions. The OARE data compared well with predictions of the quasi-steady environment. The SAMS data show the influence of thruster firings and crew motion (transient events) and of crew exercise, Orbiter systems, and experiment operations (oscillatory events). Thruster activity on this mission appears to be somewhat more frequent than on other microgravity missions with the combined firings of the F5L and F5R jets producing significant acceleration transients. The specific crew activities performed in the middeck and flight deck, the SPREE table rotations, the waste collection system compaction, and the fuel cell purge had negligible effects on the microgravity environment of the USMP-3 carriers. The Ku band antenna repositioning activity resulted in a brief interruption of the ubiquitous 17 Hz signal in the SAMS data. In addition, the auxiliary power unit operations during the Flight Control System checkout appeared to have a significant impact on the microgravity environment.

Rogers, Melissa J. B.↗
NASA NTRS1997

Summary Report of Mission Acceleration Measurements for STS-79. Launched 16 Sep. 1996

The Space Acceleration Measurement System (SAMS) collected acceleration data in support of the Mechanics of Granular Materials experiment during the STS-79 Mir docking mission, September 1996. STS-79 was the first opportunity to record SAMS data on an Orbiter while it was docked to Mir. Crew exercise activities in the Atlantis middeck and the Mir base module are apparent in the data. The acceleration signals related to the Enhanced Orbiter Refrigerator Freezer had different characteristics when comparing the data recorded on Atlantis on STS-79 with the data recorded on Mir during STS-74. This is probably due, at least in part, to different transmission paths and SAMS sensor head mounting mechanisms. Data collected on Atlantis during the STS-79 docking indicate that accelerations due to vehicle and solar array structural modes from Mir transfer to Atlantis and that the structural modes of the Atlantis-Mir complex are different from those of either vehicle independently. A 0.18 Hz component of the SAMS data, present while the two vehicles were docked, was probably caused by the Mir solar arrays. Compared to Atlantis structural modes of about 3.9 and 4.9 Hz, the Atlantis-Mir complex has structural components of about 4.5 and 5.1 Hz. After docking, apparent structural modes appeared in the data at about 0.8 and 1.8 Hz. The appearance, disappearance, and change in the structural modes during the docking and undocking phases of the joint Atlantis-Mir operations indicates that the structural modes of the two spacecraft have an effect on the microgravity environment of each other. The transfer of structural and equipment related accelerations between vehicles is something that should be considered in the International Space Station era.

Rogers, Melissa J. B.↗
NASA NTRS1997

Effects of Experiment Location and Orbiter Attitude on the Residual Acceleration On-Board STS-73 (USML-2)

A knowledge of the quasi-steady acceleration environment on the NASA Space Shuttle Orbiter is of particular importance for materials processing experiments which are limited by slow diffusive processes. The quasi-steady (less than 1 HZ) acceleration environment on STS-73 (USML-2) was measured using the Orbital Acceleration Research Experiment (OARE) accelerometer. One of the facilities flown on USML-2 was the Crystal Growth Furnace (CGF), which was used by several Principal Investigators (PIS) to grow crystals. In this paper the OARE data mapped to the sample melt location within this furnace is presented. The ratio of the axial to radial components of the quasi-steady acceleration at the melt site is presented. Effects of Orbiter attitude on the acceleration data is discussed.

Hakimzadeh, Roshanak↗
NASA NTRS1996

Electron Densities in Solar Flare Loops, Chromospheric Evaporation Upflows, and Acceleration Sites

We compare electron densities measured at three different locations in solar flares: (1) in Soft X-Ray (SXR) loops, determined from SXR emission measures and loop diameters from Yohkoh Soft X-Ray Telescope maps (n(sub e, sup SXR) = (0.2-2.5) x 10(exp 11)/ cu cm); (2) in chromospheric evaporation upflows, inferred from plasma frequency cutoffs of decimetric radio bursts detected with the 0.1-3 GHz spectrometer Phoenix of ETH Zuerich (n(sub e, sup upflow) = (0.3-11) x 10(exp 10)/cu cm; and (3) in acceleration sites, inferred from the plasma frequency at the separatrix between upward-accelerated (type III bursts) and downward-accelerated (reverse-drift bursts) electron beams [n(sub e, sup acc) = (0.6-10) x 10(exp 9)/cu cm]. The comparison of these density measurements, obtained from 44 flare episodes (during 14 different flares), demonstrates the compatibility of flare plasma density diagnostics with SXR and radio methods. The density in the upflowing plasma is found to be somewhat lower than in the filled loops, having ratios in a range n(sub e, sup upflow)/n(sub e, sup SXR) = 0.02-1.3, and a factor of 3.6 higher behind the upflow front. The acceleration sites are found to have a much lower density than the SXR-bright flare loops, i.e., n(sub e, sup acc)/n(sub e, sup SXR) = 0.005- 0.13, and thus must be physically displaced from the SXR-bright flare loops. The scaling law between electron time-of-flight distances l' and loop half-lengths s, l'/s = 1.4 +/- 0.3, recently established by Aschwanden et al. suggests that the centroid of the acceleration region is located above the SXR-bright flare loop, as envisioned in cusp geometries (e.g., in magnetic reconnection models).

Aschwanden, Markus J.↗
NASA NTRS1959

Analysis of Acceleration, Airspeed, and Gust-Velocity Data From a Four-Engine Transport Airplane Operating Over a Northwestern United States Alaska Route

Acceleration, airspeed, and altitude data obtained with an NACA VGH recorder from a four-engine commercial transport airplane operating over a northwestern United States-Alaska route were evaluated to determine the magnitude and frequency of occurrence of gust and maneuver accelerations., operating airspeeds, and gust velocities. The results obtained were then compared with the results previously reported in NACA Technical Note 3475 for two similar airplanes operating over transcontinental routes in the United States. No large variations in the gust experience for the three operations were noted. The results indicate that the gust-load experience of the present operation closely approximated that of the central transcontinental route in the United States with which it is compared and showed differences of about 4 to 1 when compared with that of the southern transcontinental route in the United States. In general, accelerations due to gusts occurred much more frequently than those due to operational maneuvers. At a measured normal-acceleration increment of 0.5g, accelerations due to gusts occurred roughly 35 times more frequently than those due to operational maneuvers.

Engel, Jerome N.↗