Search NASA⌕ Search

SEARCH · Search NASA

Results for “Adaptation models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Routeing of power lines through least-cost path analysis and multicriteria evaluation to minimise environmental impacts

Least-cost path analysis (LCPA) allows designers to find the 'cheapest' way to connect two locations within a cost surface, which can be computed by combining multiple criteria, and therefore by accounting for different issues (environmental impact, economic investment, etc.). This procedure can be easily implemented with modern Geographic Information System (GIS) technologies, and consequently it has been widely employed to support planning and design of different types of linear infrastructures, ranging from roads to pipelines. This paper presents an approach based on the integration of multicriteria evaluation (MCE) and LCPA to identify the most suitable route for a 132 kV power line. Criteria such as cost, visibility, population density, and ecosystem naturalness were used for the analysis. Firstly, spatial MCE and LCPA were combined to generate cost surfaces, and to identify alternative paths. Subsequently, MCE was used to compare the alternatives, and rank them according to their overall suitability. Finally, a sensitivity analysis allowed the stability of the results to be tested and the most critical factors of the evaluation to be detected. The study found that small changes in the location of the power line start and end points can result in significantly different paths, and consequently impact levels. This suggested that planners should always consider alternative potential locations of terminals in order to identify the best path. Furthermore, it was shown that the use of different weight scenarios may help making the model adaptable to varying environmental and social contexts. The approach was tested on a real-world case study in north-eastern Italy.

54 ENVIRONMENTAL SCIENCES↗

On the Benefits and Risks of Proton Therapy in Pediatric Craniopharyngioma

Purpose: Craniopharyngioma is a pediatric brain tumor whose volume is prone to change during radiation therapy. We compared photon- and proton-based irradiation methods to determine the effect of tumor volume change on target coverage and normal tissue irradiation in these patients. Methods and Materials: For this retrospective study, we acquired imaging and treatment-planning data from 14 children with craniopharyngioma (mean age, 5.1 years) irradiated with photons (54 Gy) and monitored by weekly magnetic resonance imaging (MRI) examinations during radiation therapy. Photon intensity-modulated radiation therapy (IMRT), double-scatter proton (DSP) therapy, and intensity-modulated proton therapy (IMPT) plans were created for each patient based on his or her pre-irradiation MRI. Target volumes were contoured on each weekly MRI scan for adaptive modeling. The measured differences in conformity index (CI) and normal tissue doses, including functional sub-volumes of the brain, were compared across the planning methods, as was target coverage based on changes in target volumes during treatment. Results: CI and normal tissue dose values of IMPT plans were significantly better than those of the IMRT and DSP plans (p < 0.01). Although IMRT plans had a higher CI and lower optic nerve doses (p < 0.01) than did DSP plans, DSP plans had lower cochlear, optic chiasm, brain, and scanned body doses (p < 0.01). The mean planning target volume (PTV) at baseline was 54.8 cm{sup 3}, and the mean increase in PTV was 11.3% over the course of treatment. The dose to 95% of the PTV was correlated with a change in the PTV; the R{sup 2} values for all models, 0.73 (IMRT), 0.38 (DSP), and 0.62 (IMPT), were significant (p < 0.01). Conclusions: Compared with photon IMRT, proton therapy has the potential to significantly reduce whole-brain and -body irradiation in pediatric patients with craniopharyngioma. IMPT is the most conformal method and spares the most normal tissue; however, it is highly sensitive to target volume changes, whereas the DSP method is not.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Finite-volume scheme for anisotropic diffusion

In this paper, we apply a special finite-volume scheme, limited to smooth temperature distributions and Cartesian grids, to test the importance of connectivity of the finite volumes. The area of application is nuclear fusion plasma with field line aligned temperature gradients and extreme anisotropy. We apply the scheme to the anisotropic heat-conduction equation, and compare its results with those of existing finite-volume schemes for anisotropic diffusion. Also, we introduce a general model adaptation of the steady diffusion equation for extremely anisotropic diffusion problems with closed field lines.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Advanced detector signal acquisition and electron beam scanning for high resolution SEM imaging

We report the advancement of materials science at the mesoscale requires improvements in both sampling volumes/areas and spatial resolution in order to make statistically significant measurements of microstructures that influence higher-order material properties, such as fatigue and fracture. Therefore, SEM-based techniques have become desirable due to improvements in imaging resolution, large sample handling capability, and flexibility for in-situ instrumentation. By using fast sampling of SEM electron detector signals, intrinsic beam scanning defects have been identified that are related to the response time of the SEM electron beam deflectors and electron detectors. Mitigation of these beam scanning defects using detector sampling approaches and an adaptive model for settling time is shown to produce higher resolution SEM images, at faster image acquisition times, with a means to quantify the different response functions for various beam deflectors and detectors including those for electrons and ions.

47 OTHER INSTRUMENTATION↗

Study of the {gamma}d {yields} K{sup +}K{sup -}np reaction and an alternative explanation for the ''{Theta}{sup +}'' peak

We look for an explanation of the peak in the K{sup +}n invariant mass distribution of the {gamma}d {yields} K{sup +}K{sup -}n p reaction that was associated to the {Theta}{sup +}(1540) pentaquark at LEPS. For this we develop a theoretical model adapted to the experiment. The study shows that the method used in the experiment to associate momenta to the undetected proton and neutron, together with the chosen cuts, necessarily creates an artificial broad peak in the assumed K{sup +}n invariant mass in the region of the claimed {Theta}{sup +}(1540), such that the remaining strength seen for the experimental peak is compatible with a fluctuation of 2{sigma} significance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Study of the rovibrational intensities of tetrahedral molecules and prediction of the pentad poliade of {sup 12}CD{sub 4}

The use of tensor models adapted to tetrahedral molecules such CH{sub 4}, SiH{sub 4}, G{sub e}H{sub 4}... that use mathematical tools (group theory, irreducible tensor operators) and the characteristics of symmetrical molecules, gives good results. Starting from an experimental spectrum, we can calculate some parameters of the Hamiltonian and consequently the energy levels. Once the line positions are determined, we calculate the parameters of the dipole moment of these molecules and consequently the rovibrational intensities. Both software STDS and SPVIEW, we determined the parameters of the Hamiltonian and those of the dipole moment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mixed-valence molecular four-dot unit for quantum cellular automata: Vibronic self-trapping and cell-cell response

Our interest in this article is prompted by the vibronic problem of charge polarized states in the four-dot molecular quantum cellular automata (mQCA), a paradigm for nanoelectronics, in which binary information is encoded in charge configuration of the mQCA cell. Here, we report the evaluation of the electronic levels and adiabatic potentials of mixed-valence (MV) tetra-ruthenium (2Ru(II) + 2Ru(III)) derivatives (assembled as two coupled Creutz-Taube complexes) for which molecular implementations of quantum cellular automata (QCA) was proposed. The cell based on this molecule includes two holes shared among four spinless sites and correspondingly we employ the model which takes into account the two relevant electron transfer processes (through the side and through the diagonal of the square) as well as the difference in Coulomb energies for different instant positions of localization of the hole pair. The combined Jahn-Teller (JT) and pseudo JT vibronic coupling is treated within the conventional Piepho-Krauzs-Schatz model adapted to a bi-electronic MV species with the square-planar topology. The adiabatic potentials are evaluated for the low lying Coulomb levels in which the antipodal sites are occupied, the case just actual for utilization in mQCA. The conditions for the vibronic self-trapping in spin-singlet and spin-triplet states are revealed in terms of the two actual transfer pathways parameters and the strength of the vibronic coupling. Spin related effects in degrees of the localization which are found for spin-singlet and spin-triplet states are discussed. The polarization of the cell is evaluated and we demonstrate how the partial delocalization caused by the joint action of the vibronic coupling and electron transfer processes influences polarization of a four-dot cell. The results obtained within the adiabatic approach are compared with those based on the numerical solution of the dynamic vibronic problem. Finally, the Coulomb interaction between the cells is considered and the influence of the vibronic coupling on the shape on the non-linear cell-cell response function is revealed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diffusion-driven growth of nanowires by low-temperature molecular beam epitaxy

With ZnTe as an example, we use two different methods to unravel the characteristics of the growth of nanowires (NWs) by gold-catalyzed molecular beam epitaxy at low temperature. In the first approach, CdTe insertions have been used as markers, and the nanowires have been characterized by scanning transmission electron microscopy, including geometrical phase analysis and energy dispersive electron spectrometry; the second approach uses scanning electron microscopy and the statistics of the relationship between the length of the tapered nanowires and their base diameter. Axial and radial growth are quantified using a diffusion-limited model adapted to the growth conditions; analytical expressions describe well the relationship between the NW length and the total molecular flux (taking into account the orientation of the effusion cells), and the catalyst-nanowire contact area. A long incubation time is observed. This analysis allows us to assess the evolution of the diffusion lengths on the substrate and along the nanowire sidewalls, as a function of temperature and deviation from stoichiometric flux.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Adaptive coupling of a deep neural network potential to a classical force field

An adaptive modeling method (AMM) that couples a deep neural network potential and a classical force field is introduced to address the accuracy-efficiency dilemma faced by the molecular simulation community. The AMM simulated system is decomposed into three types of regions. The first type captures the important phenomena in the system and requires high accuracy, for which we use the Deep Potential Molecular Dynamics (DeePMD) model in this work. The DeePMD model is trained to accurately reproduce the statistical properties of the ab initio molecular dynamics. The second type does not require high accuracy, and a classical force field is used to describe it in an efficient way. The third type is used for a smooth transition between the first and the second types of regions. By using a force interpolation scheme and imposing a thermodynamics force in the transition region, we make the DeePMD region embedded in the AMM simulated system as if it were embedded in a system that is fully described by the accurate potential. A representative example of the liquid water system is used to show the feasibility and promise of this method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Filtering, averaging, and scale dependency in homogeneous variable density turbulence

We investigate relationships between statistics obtained from filtering and from ensemble or Reynolds-averaging turbulence flow fields as a function of length scale. Generalized central moments in the filtering approach are expressed as inner products of generalized fluctuating quantities, q ' ( ξ , x ) = q ( ξ ) - q ¯ ( x ) , representing fluctuations of a field q ( ξ ) , at any point ξ, with respect to its filtered value at x. For positive-definite filter kernels, these expressions provide a scale-resolving framework, with statistics and realizability conditions at any length scale. In the small-scale limit, scale-resolving statistics become zero. In the large-scale limit, scale-resolving statistics and realizability conditions are the same as in the Reynolds-averaged description. Using direct numerical simulations (DNS) of homogeneous variable density turbulence, we diagnose Reynolds stresses, T i j , resolved kinetic energy, kr, turbulent mass-flux velocity, a i , and density-specific volume covariance, b, defined in the scale-resolving framework. These variables, and terms in their governing equations, vary smoothly between zero and their Reynolds-averaged definitions at the small and large scale limits, respectively. At intermediate scales, the governing equations exhibit interactions between terms that are not active in the Reynolds-averaged limit. For example, in the Reynolds-averaged limit, b follows a decaying process driven by a destruction term; at intermediate length scales, it is a balance between production, redistribution, destruction, and transport, where b grows as the density spectrum develops and then decays when mixing becomes strong enough. This work supports the notion of a generalized, length-scale adaptive model that converges to DNS at high resolutions and to Reynolds-averaged statistics at coarse resolutions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

RE-EXAMINATION OF THE EXPECTED GAMMA-RAY EMISSION OF SUPERNOVA REMNANT SN 1987A

A nonlinear kinetic theory, combining cosmic-ray (CR) acceleration in supernova remnants (SNRs) with their gas dynamics, is used to re-examine the nonthermal properties of the remnant of SN 1987A for an extended evolutionary period of 5–50 year. This spherically symmetric model is approximately applied to the different features of the SNR, consisting of (i) a blue supergiant wind and bubble, and (ii) of the swept-up red supergiant (RSG) wind structures in the form of an H ii region, an equatorial ring (ER), and an hourglass region. The RSG wind involves a mass loss rate that decreases significantly with elevation above and below the equatorial plane. The model adapts recent three-dimensional hydrodynamical simulations by Potter et al. in 2014 that use a significantlysmaller ionized mass of the ER than assumed in the earlier studies by the present authors. The SNR shock recently swept up the ER, which is the densest region in the immediate circumstellar environment. Therefore, the expected gamma-ray energy flux density at TeV energies in the current epoch has already reached its maximal value of ∼10{sup −13} erg cm{sup −2} s{sup −1}. This flux should decrease by a factor of about two over the next 10 years.

79 ASTRONOMY AND ASTROPHYSICS↗

Exploiting analytics techniques in CMS computing monitoring

The CMS experiment has collected an enormous volume of metadata about its computing operations in its monitoring systems, describing its experience in operating all of the CMS workflows on all of the Worldwide LHC Computing Grid Tiers. Data mining efforts into all these information have rarely been done, but are of crucial importance for a better understanding of how CMS did successful operations, and to reach an adequate and adaptive modelling of the CMS operations, in order to allow detailed optimizations and eventually a prediction of system behaviours. These data are now streamed into the CERN Hadoop data cluster for further analysis. Specific sets of information (e.g. data on how many replicas of datasets CMS wrote on disks at WLCG Tiers, data on which datasets were primarily requested for analysis, etc) were collected on Hadoop and processed with MapReduce applications profiting of the parallelization on the Hadoop cluster. We present the implementation of new monitoring applications on Hadoop, and discuss the new possibilities in CMS computing monitoring introduced with the ability to quickly process big data sets from mulltiple sources, looking forward to a predictive modeling of the system.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evolving language of pediatric anxiety in electronic health records

Objectives This study aimed to identify and quantify semantic drift (ie, the change in semantic meaning over time) within expert-defined anxiety-related (AR) terminology and compare it to common electronic health record (EHR) vocabulary across longitudinal pediatric clinical notes. Materials and Methods A corpus of pediatric clinical notes from 2009 to 2022 was analyzed using computational methods. Semantic drift for each term was quantified using cosine similarity between annual temporal word embeddings. Contextual meaning was examined through changes in nearest neighbors across years. The Laws of Semantic Change were applied to assess the influence of word frequency and polysemy. Vocabulary terms were categorized as AR or common EHR. Results 98% of AR terminology maintained a cosine similarity between 0.00 and 0.50, indicating moderate semantic stability, whereas 90% of common EHR terms remained between 0.00 and 0.25, showing greater contextual stability overall. Frequent terms exhibited minimal change (Frequency Coefficient = 0.04), whereas highly polysemous or abbreviated terms showed less stability (Polysemy Coefficient = 0.630). AR terminology drifted more slowly than general EHR vocabulary (Type Coefficient = −0.179), further supported by significant year–type interactions (Coef = −0.09 to −0.523). Discussion Although anxiety-related terminology demonstrates slower semantic drift than general EHR vocabulary, subtle contextual shifts still occur that may affect downstream interpretability and retrieval in automated systems. Conclusion Continuous linguistic monitoring and adaptive modeling are essential to maintain semantic fidelity and ensure the long-term reliability of clinical decision support systems as healthcare documentation evolves.

Pediatric anxiety disorders↗

Magnetic impurities in Kondo insulators: An application to samarium hexaboride

Impurities and defects in Kondo insulators can have an unusual impact on dynamics that blends with effects of intrinsic electron correlations. Such crystal imperfections are difficult to avoid, and their consequences are incompletely understood. In this work, we study magnetic impurities in Kondo insulators via perturbation theory of the s-d Kondo impurity model adapted to small-band-gap insulators. The calculated magnetization and specific heat agree with recent thermodynamic measurements in samarium hexaboride (SmB 6 ). This qualitative agreement supports the physical picture of multichannel Kondo screening of local moments by electrons and holes involving both intrinsic and impurity bands. Specific heat is thermally activated in zero field by Kondo screening through subgap impurity bands and exhibits a characteristic upturn as the temperature is decreased. In contrast, magnetization obtains a dominant quantum correction from partial screening by virtual particle-hole pairs in intrinsic bands. We point out that magnetic impurities could impact de Haas–van Alphen quantum oscillations in SmB6, through the effects of Landau quantization in intrinsic bands on the Kondo screening of impurity moments.

36 MATERIALS SCIENCE↗

Trigonal symmetry breaking and its electronic effects in the two-dimensional dihalides MX 2 and trihalides MX 3

We study the consequences of the approximately trigonal (D 3d ) point symmetry of the transition metal (M) site in two-dimensional van der Waals MX 2 dihalides and MX 3 trihalides. The trigonal symmetry leads to a 2-2-1 orbital splitting of the transition metal d shell, which is best represented by d orbitals that describe the trigonal rather than Oh symmetry. The ligand-ligand bond length differences (rather than metal-ligand) take the role of a Jahn-Teller-like mode and in combination with interlayer distances and dimensionality effects tune the crystal field splittings and bandwidths. These effects, in turn, are amplified by electronic correlation effects—leading to crystal field splittings of the order of 0.1–1 eV between the singlet and the lowest orbital doublet—as opposed to the often assumed degenerate 3 t 2g states. Our calculations explain why most of the materials in this family are insulating, and why these considerations have to be taken into account in realistic models of them. Further, orbital order coupled to various lower symmetry lattice modes may lift the remaining orbital degeneracies, and we explain how these may support unique electronic states using ZrI 2 and CuCl 2 as examples, and offer a brief overview of possible electronic configurations in this class of materials. By building and analyzing Wannier models adapted to the appropriate symmetry we examine how the interplay among trigonal symmetry, electronic correlation effects, and – d orbital charge transfer leads to insulating, orbitally polarized magnetic and/or orbital-selective Mott states, and we provide a simple framework and numerical tool for others. Our paper establishes a rigorous framework to understand, control, and tune the electronic states in low-dimensional correlated halides. Furthermore, our analysis shows that trigonal symmetry and its breaking is a key feature of the two-dimensional halides that needs to be accounted for in search of novel electronic states in materials ranging from CrI 3 to α–RuCl 3 .

2-dimensional systems↗

Velocity Profiling of a Gas–Solid Fluidized Bed Using Electrical Capacitance Volume Tomography

In this study, a method of producing velocity profile maps from electrical capacitance volume tomography (ECVT) measurements by reconstructing displacement from measured changes in capacitance is developed and applied to fluidized bed systems. The mapping of the reconstruction leverages the gradient of the sensitivity distribution of the ECVT sensor to circumvent the need for image cross correlation techniques. Experimental data of both bubbling and slugging fluidized beds are collected in a cold flow model. Adaptation of the technique is discussed in detail, and velocity profiles are obtained for a range of gas flow rates. The produced velocity maps are compared against the established methods of cross correlation and against empirical correlations from the literature and are found to agree well in tracking slug and bubble velocity. The exception is when the tracked object is large relative to the ECVT sensor dimensions, a scenario that can be avoided through proper sensor design. The quantities of average velocity, momentum, and solid and gas volume fraction are derived from the image and velocity profiles. The results demonstrate and extend the power of ECVT as a measurement tool for the study and monitoring of gas–solid fluidized beds by providing a computationally cheaper alternative to 3-D cross correlation for deriving velocity profiles.

47 OTHER INSTRUMENTATION↗

The Fast-Evolving phy-2 Gene Modulates Sexual Development in Response to Light in the Model Fungus Neurospora crassa

Rapid responses to changes in incident light are critical to the guidance of behavior and development in most species. Phytochrome light receptors in particular play key roles in bacterial physiology and plant development, but their functions and regulation are less well understood in fungi. Nevertheless, genome-wide expression measurements provide key information that can guide experiments that reveal how genes respond to environmental signals and clarify their role in development. We performed functional genomic and phenotypic analyses of the two phytochromes in Neurospora crassa, a fungal model adapted to a postfire environment that experiences dramatically variable light conditions. Expression of phy-1 and phy-2 was low in early sexual development and in the case of phy-2 increased in late sexual development. Under light stimulation, strains with the phytochromes deleted exhibited increased expression of sexual development-related genes. Moreover, under red light, the phy-2 knockout strain commenced sexual development early. In the evolution of phytochromes within ascomycetes, at least two duplications have occurred, and the faster-evolving phy-2 gene has frequently been lost. Additionally, the three key cysteine sites that are critical for bacterial and plant phytochrome function are not conserved within fungal phy-2 homologs. Through the action of phytochromes, transitions between asexual and sexual reproduction are modulated by light level and light quality, presumably as an adaptation for fast asexual growth and initiation of sexual reproduction of N. crassa in exposed postfire ecosystems.

59 BASIC BIOLOGICAL SCIENCES↗

Exascale Computing and Data Handling: Challenges and Opportunities for Weather and Climate Prediction

The emergence of exascale computing and artificial intelligence offer tremendous potential to significantly advance Earth system prediction capabilities. However, enormous challenges must be overcome to adapt models and prediction systems to use these new technologies effectively. A 2022 WMO report on exascale computing recommends “urgency in dedicating efforts and attention to disruptions associated with evolving computing technologies that will be increasingly difficult to overcome, threatening continued advancements in weather and climate prediction capabilities.” Further, the explosive growth in data from observations, model and ensemble output, and postprocessing threatens to overwhelm the ability to deliver timely, accurate, and precise information needed for decision-making. Artificial intelligence (AI) offers untapped opportunities to alter how models are developed, observations are processed, and predictions are analyzed and extracted for decision-making. Given the extraordinarily high cost of computing, growing complexity of prediction systems, and increasingly unmanageable amount of data being produced and consumed, these challenges are rapidly becoming too large for any single institution or country to handle. This paper describes key technical and budgetary challenges, identifies gaps and ways to address them, and makes a number of recommendations.

Atmosphere↗