SEARCH · Search NASA

Results for “Airframes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Inlet, engine, airframe controls integration development for supercruising aircraft

In connection with a consideration of advanced military aircraft systems, attention is given to research for improving the technology of the design of supersonic cruise aircraft. Syberg et al. (1981) have shown that an analytic design method is now available to accurately predict the flow characteristics of axisymmetric supersonic inlets, including off-design angle of attack operation. On the basis of information regarding the inlet flow characteristics, the control system designer can begin the inlet design and development, before wind tunnel testing has begun. The present investigation is concerned with details and status of inlet control technology. A detailed representation of a supersonic propulsion system is developed. This development demonstrates the feasibility of the selected hybrid computational concept.

Houchard, J. H.↗

NASA NTRS1985

Energy-Absorbing Airframes for General Aviation

Concept for protecting people in lightweight airplane crashes involves redesigning area between interior floor and outer skin of airplane belly to create subfloor strong enough to bear stresses of flight but crush under force of impact. Several concepts evaluated and five selected and designed as lower fuselage sections tested in NASA's crash-testing program. Notched corner concept, Corrugated Beam concept, Foam-Filled Cylinder concept, Corrugated Half Shell concept, and Canted Bulkhead concept. Experimental and analytical results indicate all five concepts perform well; upper floor remains structurally intact whereas crush zone collapses under essentially constant load.

Carden, H. D.↗

NASA NTRS1982

Nozzle performance calibration and turbomachinery operational analysis of Turbo-Powered Simulators (TPS) for the NASA-Langley EET propulsion airframe integration investigation

The Boeing flight simulator chamber facility energy efficient transport (EET) propulsion/airframe integration investigation was tested. Two turbopowered simulators (TPS) were calibrated with four different nacelle configurations. Two nacelle configurations were calibrated on each TPS, each calibration simulating the full nozzle pressure ratio range encountered in a one atmosphere total pressure wind tunnel operating over a Mach number range from 0.70 to 0.90 Mach. The results of the calibration test are in the form of velocity and discharge coefficient which is used in determining the simulator thrust while the TPS is operating in the wind tunnel.

Rowe, R. K.↗

NASA NTRS1984

The application of a low-order panel method - program VSAERO to powerplant and airframe flow studies

Results from the application of VSAERO, a low-order panel method, to three practical aircraft configurations are presented. The Grumman 698-411 tilt-nacelle V/STOL model is analyzed with particular emphasis on the inlet pressures and the nacelle/fuselage interference effects. Excellent correlation with experiment is reported for the inlet pressure ratio and the inlet operational boundaries. Analysis of an inlet designed for a tilt-rotor/nacelle aircraft is presented. The code was used in a design environment for this configuration to determine an inlet geometry that maintained attached flow for three design flight conditions: hover, hover-transition and cruise. VSAERO is also used to examine the prop-slipstream induced loading for the Langley prop-fan configuration. The versatility and economy of the aerodynamic modeling program, VSAERO, is demonstrated.

Strash, D. J.↗

NASA NTRS1982

Inlet and airframe compatibility for a V/STOL fighter/attack aircraft with top-mounted inlets

Aerodynamic force and inlet pressure data are obtained for 9.5% force and pressure models of a V/STOL fighter/attack aircraft configuration with top mounted twin inlets. Data are presented from tests conducted in the Ames Unitary Wind Tunnels at Mach numbers of 0.6, 0.9, and 1.2 at angles of attack up to 27 deg. and angles of sideslip up to 12 deg. Trimmed aerodynamic characteristics and inlet performance are compared for three different leading edge extension (LEX) configurations. The effects of wing leading and trailing-edge flaps on the inlet are also determined. Maneuver perfromance is calculated form combined force and inlet pressure data. The largest of the three LEX sizes tested gives the best airplane maneuver performance. Wing flap deflections improved inlet recovery at all Mach numbers.

Durston, D. A.↗

NASA NTRS1984

Flight and wind-tunnel comparisons of the inlet-airframe interaction of the F-15 airplane

The design of inlets and nozzles and their interactions with the airplane which may account for a large percentage of the total drag of modern high performance aircraft is discussed. The inlet/airframe interactions program and the flight tests conducted is described. Inlet drag and lift data from a 7.5% wind-tunnel model are compared with data from an F-15 airplane with instrumentation to match the model. Pressure coefficient variations with variable cowl angles, capture ratios, examples of flow interactions and angles of attack are for Mach numbers of 0.6, 0.9, 1.2, and 1.5 are presented.

Webb, L. D.↗

NASA NTRS1984

Full-scale crash-test evaluation of two load-limiting subfloors for general aviation airframes

Three six place, low wing, twin engine general aviation airplane test specimens were crash tested at the Langley Impact Dynamics Research Facility under controlled free flight conditions. One structurally unmodified airplane was the base line specimen for the test series. The other two airplanes were structurally modified to incorporate load limiting (energy absorbing) subfloor concepts into the structure for full scale crash test evaluation and for comparison with the unmodified airplane test results. Typically, the lowest floor accelerations, the lowest anthropomorphic dummy responses, and the least seat crushing of standard and load limiting seats occurred in the airplanes modified with load limiting subfloors, wherein the greatest structural crushing of the subfloor took place. The better performing of the two load limiting subfloor concepts reduced the peak airplane floor accelerations to -25g to -30g as compared with approximately -40g to -55g for the unmodified airplane structure.

Carden, H. D.↗

NASA NTRS1986

Aerodynamics of Engine-Airframe Interaction

The report describes progress in research directed towards the efficient solution of the inviscid Euler and Reynolds-averaged Navier-Stokes equations for transonic flows through engine inlets, and past complete aircraft configurations, with emphasis on the flowfields in the vicinity of engine inlets. The research focusses upon the development of solution-adaptive grid procedures for these problems, and the development of multi-grid algorithms in conjunction with both, implicit and explicit time-stepping schemes for the solution of three-dimensional problems. The work includes further development of mesh systems suitable for inlet and wing-fuselage-inlet geometries using a variational approach. Work during this reporting period concentrated upon two-dimensional problems, and has been in two general areas: (1) the development of solution-adaptive procedures to cluster the grid cells in regions of high (truncation) error;and (2) the development of a multigrid scheme for solution of the two-dimensional Euler equations using a diagonalized alternating direction implicit (ADI) smoothing algorithm.

Caughey, D. A.↗

NASA NTRS1987

Microburst model requirements for flight simulation: An airframe manufacturer's perspective

A brief outline is given of topics for presentation and discussion at the workshop. As manufacturers and certifiers of transport airplanes and associated on-board systems, an interest in the prevention of wind shear related accidents and incidents is inherent. The near term objectives are to provide the customers technical support in the areas of training as well as to research existing and potentially improved on-board systems. In the future, many improved systems should be implemented. This will require certification as well as further educational activity in the use of these new systems. A set of wind models is needed for design work which characterize a wide variety of real microbursts as measured during the JAWS project. The wind models should be limited in both size and complexity to just those features which degrade aircraft performance.

Schoenman, Richard L.↗

NASA NTRS1985

Propulsion and airframe aerodynamic interactions of supersonic V/STOL configurations, phase 1

A wind tunnel model of a supersonic V/STOL fighter configuration has been tested to measure the aerodynamic interaction effects which can result from geometrically close-coupled propulsion system/airframe components. The approach was to configure the model to present two different test techniques. One was a coventional test technique composed of two test modes. In the Flow-Through mode, absolute configuration aerodynamics are measured, including inlet/airframe interactions. In the Jet-Effects mode, incremental nozzle/airframe interactions are measured. The other test technique is a propulsion simulator approach, where a subscale, externally powered engine is mounted in the model. This allows proper measurement of inlet/airframe and nozzle/airframe interactions simultaneously.

Mraz, M. R.↗

NASA NTRS1987

Reduced complexity structural modeling for automated airframe synthesis

A procedure is developed for the optimum sizing of wing structures based on representing the built-up finite element assembly of the structure by equivalent beam models. The reduced-order beam models are computationally less demanding in an optimum design environment which dictates repetitive analysis of several trial designs. The design procedure is implemented in a computer program requiring geometry and loading information to create the wing finite element model and its equivalent beam model, and providing a rapid estimate of the optimum weight obtained from a fully stressed design approach applied to the beam. The synthesis procedure is demonstrated for representative conventional-cantilever and joined wing configurations.

Hajela, Prabhat↗

NASA NTRS1987

Observations and analyses of natural laminar flow over a nonlifting airframe surface

A NASA-sponsored flight experiment program has been conducted with a twin-engined, propeller-driven general aviation aircraft, in order to ascertain the transition location and mode over the nonaxisymmetric fuselage forebody. Attention is given to the transition instrumentation layout and the flight test plan matrix. The results obtained for transition in varying freestream and propeller conditions will furnish insights into transition mechanisms and the significance of crossflow instability during transition in realistic nonaxisymmetric fuselage forebodies at angles of attack and sideslip.

Vijgen, Paul M. H. W.↗

NASA NTRS1988

Computational methods for inlet airframe integration

Fundamental equations encountered in computational fluid dynamics (CFD), and analyses used for internal flow are introduced. Irrotational flow; Euler equations; boundary layers; parabolized Navier-Stokes equations; and time averaged Navier-Stokes equations are treated. Assumptions made and solution methods are outlined, with examples. The overall status of CFD in propulsion is indicated.

Towne, Charles E.↗

NASA NTRS1988

CFD application to subsonic inlet airframe integration

The fluid dynamics of curved diffuser duct flows of military aircraft is discussed. Three-dimensional parabolized Navier-Stokes analysis, and experiment techniques are reviewed. Flow measurements and pressure distributions are shown. Velocity vectors, and the effects of vortex generators are considered.

Anderson, Bernhard H.↗

NASA NTRS1988

CFD application to supersonic/hypersonic inlet airframe integration

Supersonic external compression inlets are introduced, and the computational fluid dynamics (CFD) codes and tests needed to study flow associated with these inlets are outlined. Normal shock wave turbulent boundary layer interaction is discussed. Boundary layer control is considered. Glancing sidewall shock interaction is treated. The CFD validation of hypersonic inlet configurations is explained. Scramjet inlet modules are shown.

Benson, Thomas J.↗

NASA NTRS1989

Aerodynamics of engine-airframe interaction

The development of the variational approach for the solution of inviscid aerodynamic problems using solution adaptive grids is discussed. The formulation of a new, directional weighting, functional has been shown to have desirable properties. The scheme has been applied to compute the transonic flow past two-dimensional airfoils using the Euler equations of inviscid, compressible flow. Transonic flows in quasi-one-dimensional nozzles and over the two dimensional airfoils are solved on the various solution-adaptive-grids to demonstrate the applicability of the proposed directional-concentration functional and the grid adaptation process from the stand point of improving the solution accuracy and demonstrating the overall convergence.

Caughey, David A.↗

NASA NTRS1988

Propulsion-airframe integration for commercial and military aircraft

A significant level of research is ongoing at NASA's Langley Research Center on integrating the propulsion system with the aircraft. This program has included nacelle/pylon/wing integration for turbofan transports, propeller/nacelle/wing integration for turboprop transports, and nozzle/afterbody/empennage integration for high performance aircraft. The studies included in this paper focus more specifically on pylon shaping and nacelle location studies for turbofan transports, nacelle and wing contouring and propeller location effects for turboprop transports, and nozzle shaping and empennage effects for high performance aircraft. The studies were primarily conducted in NASA Langley's 16-Foot Transonic Tunnel at Mach numbers up to 1.20. Some higher Mach number data obtained at NASA's Lewis Research Center is also included.

Henderson, William P.↗

NASA NTRS1989

Innovative pylon concepts for engine-airframe integration for transonic transports

Pylon cross-sectional geometries that are believed to reduce pylon/wing installation drag are analyzed. The basic design philosophy is to alleviate flow acceleration near the pylon/wing junction by aerodynamic means. This involves reshaping the pylon, particularly on the inboard side. In some instances this is achieved by moving the pylon trailing edge closure aft of the wing trailing edge. A three-dimensional Euler code was used for the analysis. Promising pylon shapes are identified for further investigation.

Naik, Dinesh A.↗