White Papers on Proliferation Resistance and Physical Protection Characteristics of the Six GEN IV Nuclear Energy Systems
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
A series of tests was performed to determine an optimum resin to be used as a UV rigidizable matrix in expandable rigidizable space structures. Commercially available resins including several types of polyesters, epoxies, epoxy-acrylics, an acrylic and a urethane were used as well as a polyester, produced by 3M Company's Solar Laboratory facility, which was found the best from the standpoint of physical properties and ability to be 'B' staged. Two other synthesized materials were also tested, but were not found to be superior to the Solar resin. An optimum fabric for use with the preferred resin was not found; however, the 15 ounce fabric from Solar Laboratories has the best combination of physical properties with respect to handling and processing characteristics. Expansion techniques for tubular structures, 'B' staging of the solar resin, and stowage techniques for up to 5 months were developed. A one meter high tetrahedron preprototype structure was prepared to evaluate and demonstrate stowage, deployment, and rigidization techniques.
Femtoscopy of nonidentical particle pairs has been instrumental for precision measurements of both two-particle sources and the final-state interactions in high-energy elementary and heavy-ion collisions. The majority of measurements assessing the source properties are based on identical particle pairs, providing direct access to the characteristics of the single-particle source. The work in this paper demonstrates, via femtoscopy measurements of charged pion-deuteron pairs in Pb-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV, the feasibility of accessing the characteristics of the single-particle femtoscopic source by using particle pairs with large mass differences such as pions and deuterons. The first experimental results of the measurement of deuteron source sizes in ultrarelativistic heavy-ion collisions are presented. The results show good agreement with the trend derived from other charged hadrons such as pions, kaons, and protons as a function of transverse mass, indicating similar source properties.
Current long-baseline accelerator experiments, NOvA and T2K, are making excellent measurements of neutrino oscillations and the next generation of experiments, DUNE and HK, will make measurements at the O ( 1 % ) level of precision. These measurements are a combination of the appearance channel which is more challenging experimentally but depends on many oscillation parameters, and the disappearance channel which is somewhat easier and allows for precision measurements of the atmospheric mass splitting and the atmospheric mixing angle. It is widely recognized that the matter effect plays a key role in the appearance probability, yet the effect on the disappearance probability is surprisingly small for these experiments. Here we investigate both exactly how small the effect is and show that it just begins to become relevant in the high statistics regime of DUNE. Published by the American Physical Society 2024
For several years now, Fermilab has been investigating the use of HDF5 for large-scale analysis of experimental high energy physics (HEP) data.
Abstract Precise measurements of $$b\rightarrow c\tau \bar{\nu }$$ b → c τ ν ¯ decays require large resource-intensive Monte Carlo (MC) samples, which incorporate detailed simulations of detector responses and physics backgrounds. Extracted parameters may be highly sensitive to the underlying theoretical models used in the MC generation. Because new physics (NP) can alter decay distributions and acceptances, the standard practice of fitting NP Wilson coefficients to SM-based measurements of the $$R(D^{(*)})$$ R ( D ( ∗ ) ) ratios can be biased. The newly developed software tool enables efficient reweighting of MC samples to arbitrary NP scenarios or to any hadronic matrix elements. We demonstrate how allows avoidance of biases through self-consistent fits directly to the NP Wilson coefficients. We also present example analyses that demonstrate the sizeable biases that can otherwise occur from naive NP interpretations of SM-based measurements. The library is presently interfaced with several existing experimental analysis frameworks and we provide an overview of its structure.
A description is given of the physics of electromagnetic scattering from the sea and a guideline is presented to relate an observable (such as the radar cross section) to the hydrodynamics or physical properties of the sea. As specific examples of the interdisciplinary science of electromagnetics and geophysical oceanography, the physics is discussed in connection with data provided by three instruments: namely, the scatterometer, the altimeter, and the imaging radar. The data provided by each instrument are discussed in context with specular point and Bragg scattering theories. Finally, the degrading effect of extraneous sources of noise is discussed as a limiting mechanism of the accuracy of the ocean surface measurement.
Spectra of Ton 524a, b show that these two compact emission-line galaxies have nearly identical redshifts. This is the first pair of Seyfert-like galaxies that appear to form a physical pair.
Lithium is a low-Z material, and lithium-based plasma-facing components (PFCs) are planned for the National Spherical Torus Experiment Upgrade (NSTX-U) to explore potential benefits for divertor power exhaust and core plasma management. NSTX-U is a medium-sized spherical tokamak with up to 12 MW of auxiliary heating, capable of generating reactor-relevant plasma conditions. This work presents boundary plasma simulations for NSTX-U with lithium PFCs using the UEDGE code, incorporating full magnetic and 𝐄 ×𝐁 drift physics. The simulations show that drifts strongly influence heat and particle transport: they enhance convective transport, broaden the scrape-off layer heat-flux width 𝜆 𝑞 , and reduce the anomalous heat diffusivity 𝜒 required to reproduce predicted SOL heat-flux width. 𝐄 ×𝐁 drifts provide poloidal transport, while ∇𝐵 (which includes both gradB and curvature) drifts provide radial heat and particle transport. Lithium transport is also affected by drifts, with lithium ions migrating from the outer divertor to the inner divertor through the private flux region (PFR) following the 𝐄 ×𝐁 drifts flow, lowering upstream impurity lithium densities. UEDGE is self-consistently coupled with the Wall-Li model to study plasma lithium PFC interactions depending on the local lithium sourcing based on local plasma conditions and lithium surface temperature. In these simulations, lithium evaporation shows a vapor-shielding effect that reduces divertor heat flux and increases radiative losses once surface temperatures exceed 450°C. This research work provides a first step toward self-consistent modeling of lithium PFCs in NSTX-U, demonstrating the impact of drift-driven plasma transport in SOL and divertor regions.
Analyses and modeling of the T -dependent thermal properties of Zn 2 GeSe 4 reveal an ultra-low thermal conductivity over a large temperature range due to low-frequency soft modes as well as strong lattice anharmonicity.
The magnetic field topology and error fields are measured in the MUSE permanent magnet stellarator with an electron beam and fluorescent rod. The effective magnetization of the magnets is determined by measuring rational flux surface locations. Electron magnetic drift effects must be considered self-consistently due to the small magnetic shear on MUSE. Error fields are characterized by flux surface shape deviation and magnetic island chain width and phase. Error fields are then corrected by adjusting the permanent magnet (PM) holders as rigid bodies. Resonant error fields are on the order of or smaller than 3 x 10 -6 of the toroidal field after correction and surface shape matches well with the design. Resonant components of the quasi-symmetry deviation are estimated, using a novel magnetic drift measurement, to be in the 10 −4 range. The PM approach is validated as a low-cost and precise way to build optimized stellarators.
JSNS 2 (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment that is searching for sterile neutrinos via the observation of $\overline{ν}$ μ → $\overline{ν}$ e appearance oscillations using neutrinos from muon decay-at-rest. For this search, rejecting cosmic-ray-induced neutron events by Pulse Shape Discrimination (PSD) is essential because the JSNS2 detector is located above ground, on the third floor of the building. We have achieved 94.95% ± 0.15% rejection of neutron events while keeping 92.82% ± 1.77% of signal, electron-like events using a data-driven likelihood method. This article will report the PSD technique using the full fiducial volume of the JSNS2 detector.
The safe transportation of radioactive material using appropriately designed and certified transportation packages is important to protect the public and environment. Therefore, a comprehensive and rigorous system of packaging requirements are required. The purpose of this test protocol is to determine the effects of drop testing on package performance in a Type B shipping package (DPP-3). Required physical tests for the DPP-3 package include normal conditions of transport and hypothetical accident conditions test requirements. The preparation, regulatory testing, and post-test evaluation of a Type B shipping package tested to the 10 CFR 71.71 and 10 CFR 71.73 requirements will be presented. Six packages were tested and the responses when subjected to the HAC sequence of free drop, puncture, and thermal tests according to 10 CFR 71.73 were measured. The posttest helium leak test showed a leak rate less than 1 × 10-7 He-cc/sec which means that the containment boundary was maintained after the regulatory testing, therefore maintaining a leak tight environment. To determine the amount of change in the package performance measurements, statistical analyses were conducted using SPSS version 26. The null hypothesis of the testing was that there would not be a change in the measurements from pre to post-testing large enough to find statistical significance. Therefore, a finding of statistical significance indicated too much variability in the package design and was deemed an unfavorable finding. A repeated measures t-test was used to analyze the drum lids and CV torques. A one-way ANOVA was used to analyze height and diameter packages. Results of the repeated measures t-test indicated that all six containment vessel lid torques were statistically significant. However only three out of the six drum lid torques were statistically significant. Therefore, design of the lids caused more variability than necessary when subjected to the following drop tests: 1.) horizontal and cold; 2.) vertical lid down; and 3.) corner with lid up. Results of the one-way ANOVA analysis on height indicated that four out of the six CTUs were statistically significant. Thus, design of the CTUs caused more variability then necessary when subjected to the following drop tests: 1.) horizontal hot; 2.) horizontal cold; 3.) corner lid up; and 4.) corner lid down. Results of the one-way ANOVA analysis on diameter indicated that all six CTUs were statistically significant. Thus, design of the CTUs caused more variability then necessary when subjected to all of the tests. The DPP-3 design has been shown to be an acceptable design for the transport of radioactive materials. However, results of the statistical analysis reveal a possible improvement in package and test design to reduce variability in package performance measurement before and after testing.
During the period of the grant DOE DESC0014335, the PI worked on a range of material systems from the triplet superconductor UTe 2 to Sr 2 RuO 4 and superconductivity in Weyl semimetals. DOE funding has resulted in a total of nine papers. Papers have been published in the following journals: Nature, Science, PNAS, Nature Physics, Nature Communications, Phys. Rev. B, and npj Quantum materials. No funds are expected to remain at the end of this project. Below is a description of our scientific findings during this period.
The production cross sections of $ {\textrm{B}}_{\textrm{s}}^0 $ and B$^{+}$ mesons are reported in proton-proton (pp) collisions recorded by the CMS experiment at the CERN LHC with a center-of-mass energy of 5.02 TeV. The data sample corresponds to an integrated luminosity of 302 pb$^{−1}$. The cross sections are based on measurements of the $ {\textrm{B}}_{\textrm{s}}^0 $→ J/ψ(μ$^{+}$μ$^{−}$)ϕ(1020)(K$^{+}$K$^{−}$) and B$^{+}$→ J/ψ(μ$^{+}$μ$^{−}$)K$^{+}$ decay channels. Results are presented in the transverse momentum (p$_{T}$) range 7–50 GeV/c and the rapidity interval |y| < 2.4 for the B mesons. The measured p$_{T}$-differential cross sections of B$^{+}$ and $ {\textrm{B}}_{\textrm{s}}^0 $ in pp collisions are well described by fixed-order plus next-to-leading logarithm perturbative quantum chromodynamics calculations. Using previous PbPb collision measurements at the same nucleon-nucleon center-of-mass energy, the nuclear modification factors, R$_{AA}$, of the B mesons are determined. For p$_{T}$> 10 GeV/c, both mesons are found to be suppressed in PbPb collisions (with R$_{AA}$ values significantly below unity), with less suppression observed for the $ {\textrm{B}}_{\textrm{s}}^0 $ mesons. In this p$_{T}$ range, the R$_{AA}$ values for the B$^{+}$ mesons are consistent with those for inclusive charged hadrons and D$^{0}$ mesons. Below 10 GeV/c, both B$^{+}$ and $ {\textrm{B}}_{\textrm{s}}^0 $ are found to be less suppressed than either inclusive charged hadrons or D$^{0}$ mesons, with the $ {\textrm{B}}_{\textrm{s}}^0 $R$_{AA}$ value consistent with unity. The R$_{AA}$ values found for the B$^{+}$ and $ {\textrm{B}}_{\textrm{s}}^0 $ are compared to theoretical calculations, providing constraints on the mechanism of bottom quark energy loss and hadronization in the quark-gluon plasma, the hot and dense matter created in ultrarelativistic heavy ion collisions.
Current laboratory bounds imply that protons are extremely long-lived. However, this conclusion may not hold for all time and in all of space. We find that the proton lifetime can be ∼ 15 orders of magnitude shorter in the relatively recent past on Earth or at the present time elsewhere in the Milky Way. A number of terrestrial and astrophysical constraints are examined and potential signals are outlined. We also sketch possible models that could lead to spatial or temporal variations in the proton lifetime. A positive signal could be compelling evidence for a new long range force of nature, with important implications for the limitations of fundamental inferences based solely on laboratory measurements. Published by the American Physical Society 2025
A full set of optimized observables is measured in an angular analysis of the decay B 0 → K* (892) 0 μ + μ – using a sample of proton-proton collisions at $\sqrt{s}$ = 13 TeV, collected with the CMS detector at the LHC, corresponding to an integrated luminosity of 140fb –1 . The analysis is performed in six bins of the squared invariant mass of the dimuon system, q 2 , over the range 1.1 < q 2 < 16 GeV 2 . The results are among the most precise experimental measurements of the angular observables for this decay and are compared to a variety of predictions based on the standard model. Some of these predictions exhibit tension with the measurements.