Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

A watt-class 1-THz backward-wave oscillator based on sine waveguide

A novel backward wave oscillator was proposed by utilizing a concise sine waveguide slow-wave structure combined with sheet electron beam to operate at terahertz frequency band. First, the design method was described, and the dispersion curve and interaction impedance of the sine waveguide were calculated, then the device oscillation frequency and operating voltage were determined. Next, the circuit transmission losses were learned over the tunable frequency range. Finally, the particle-in-cell simulation method was applied to predict its signal generation performance. The investigation results show that, the backward wave oscillator can produce over 1.9 -W peak power output at the central operating frequency of 1-THz under 27-kV operating voltage and 5-mA beam current. And the interaction efficiency at 1-THz is more than 1.4% with a circuit length of 7.2-mm. It, therefore, will be considered as a promising watt-class terahertz radiation source.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Thermoelectric properties of doped BaHfO{sub 3}

We have studied the structural stability, electronic structure, optical properties and thermoelectric properties of doped BaHfO{sub 3} by full potential linearized augmented plane wave (FP-LAPW) method. The electronic structure of BaHfO{sub 3} doped with Sr shows enhances the indirect band gaps of 3.53 eV, 3.58 eV. The charge density plots show strong ionic bonding in Ba-Hf, and ionic and covalent bonding between Hf and O. Calculations of the optical spectra, viz., the dielectric function, refractive index and extinction coefficient are performed for the energy range are calculated and analyzed. Thermoelectric properties of semi conducting are also reported first time. The doped BaHfO{sub 3} is approximately wide band gap semiconductor with the large p-type Seebeck coefficient. The power factor of BaHfO{sub 3} is increased with Sr doping, decreases because of low electrical resistivity and thermal conductivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Towards predictive band gaps for halide perovskites: Lessons from one-shot and eigenvalue self-consistent GW

Halide perovskites constitute a chemically diverse class of crystals with great promise as photovoltaic absorber materials, featuring band gaps between about 1 and 3.5 eV depending on composition. Their diversity calls for a general computational approach to predicting their band gaps. However, such an approach is still lacking. Here, we use density functional theory (DFT) and ab initio many-body perturbation theory within the GW approximation to compute the quasiparticle or fundamental band gap of a set of ten representative halide perovskites: CH 3 NH 3 PbI 3 ( MAPbI 3 ), MAPbBr 3 , CsSnBr 3 , ( MA ) 2 BiTlBr 6 , Cs 2 TlAgBr 6 , Cs 2 TlAgCl 6 , Cs 2 BiAgBr 6 , Cs 2 InAgCl 6 , Cs 2 SnBr 6 , and Cs 2 Au 2 I 6 . Comparing with recent measurements, we find that a standard generalized gradient exchange-correlation functional can significantly underestimate the experimental band gaps of these perovskites, particularly in cases with strong spin-orbit coupling (SOC) and highly dispersive band edges, to a degree that varies with composition. We show that these nonsystematic errors are inherited by one-shot G 0 W 0 and eigenvalue self-consistent GW 0 calculations, demonstrating that semilocal DFT starting points are insufficient for MAPbI 3 , MAPbBr 3 , CsSnBr 3 , ( MA ) 2 BiTlBr 6 , Cs 2 TlAgBr 6 , and Cs 2 TlAgCl 6 . On the other hand, we find that DFT with hybrid functionals leads to an improved starting point and G W 0 results in better agreement with experiment for these perovskites. Our results suggest that G W 0 with hybrid functional-based starting points are promising for predicting band gaps of systems with large SOC and dispersive bands in this technologically important class of semiconducting crystals.</

36 MATERIALS SCIENCE↗

Variational calculations of vibrational properties of ozone

A variational method is used to obtain vibrational-rotational properties for ozone from an experimental quartic force field. Band positions, average structures, matrix elements for calculating infrared intensities, and effective rotational constants are reported for (O-16)3 and its O-18 isotopic species. Also, the degree to which the vibrational energies and properties are converged is investigated as a function of the basis set parameters and basis set size, and of the method of obtaining the Hamiltonian matrix elements. A convenient procedure for assigning the vibrational states is developed for variational vibrational wavefunction expansions.

Carney, G. D.↗

Solvate Structures and Computational/Spectroscopic Characterization of LiPF6 Electrolytes

Raman spectroscopy is a powerful method for identifying ion-ion interactions, but only if the vibrational band signature for the anion coordination modes can be accurately deciphered. The present study characterizes the PF6- anion P-F Raman symmetric stretching vibrational band for evaluating the PF6-...Li+ cation interactions within LiPF6 crystalline solvates to create a characterization tool for liquid electrolytes. To facilitate this, the crystal structures for two new solvates—(G3)1:LiPF6 and (DEC)2:LiPF6 with triglyme and diethyl carbonate, respectively—are reported. The information obtained from this analysis provides key guidance about the ionic association information which may be obtained from a Raman spectroscopic evaluation of electrolytes containing the LiPF6 salt and aprotic solvents. Of particular note is the overlap of the Raman bands for both solvent-separated ion pair (SSIP) and contact ion pair (CIP) coordination in which the PF6- anions are uncoordinated or coordinated to a single Li+ cation, respectively.

crystal structure↗

Combined experimental and theoretical assessments of the lattice dynamics and optoelectronics of TaON and Ta{sub 3}N{sub 5}

Presented herein is a detailed discussion of the properties of the lattice dynamic and optoelectronic properties of tantalum(V) oxynitride (TaON) and tantalum(V) nitride (Ta{sub 3}N{sub 5}), from experimental and theoretical standpoint. The active Raman and infra red (IR) frequencies of TaON and Ta{sub 3}N{sub 5} were measured using confocal Raman and Fourier Transform Infrared spectroscopies (FTIR) and calculated using the linear response method within the density functional perturbation theory (DFPT). The detailed study leads to an exhaustive description of the spectra, including the symmetry of the vibrational modes. Electronic structures of these materials were computed using DFT within the range-separated hybrid HSE06 exchange–correlation formalism. Electronic and ionic contributions to the dielectric constant tensors of these materials were obtained from DFPT within the linear response method using the PBE functional. Furthermore, effective mass of photogenerated holes and electrons at the band edges of these compounds were computed from the electronic band structure obtained at the DFT/HSE06 level of theory. The results suggest that anisotropic nature in TaON and Ta{sub 3}N{sub 5} is present in terms of dielectric constant and effective masses. - Graphical abstract: Detailed investigation has been conducted from combined experimental and theoretical approaches on Raman and IR spectroscopies, electronic structures, dielectric constants and effective masses of TaON and Ta{sub 3}N{sub 5}. - Highlights: • Crystal structures of TaON and Ta{sub 3}N{sub 5} are discussed based on XRD and DFT calculation. • Raman and IR spectra of TaON and Ta{sub 3}N{sub 5} materials are measured and computed by DFPT method. • Optoelectronic properties of TaON and Ta{sub 3}N{sub 5} are discussed. • Dielectric constant and effective masses of TaON and Ta{sub 3}N{sub 5} are calculated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

E{sub 1} Gap of Wurtzite InAs Single Nanowires Measured by Means of Resonant Raman Spectroscopy

Indium arsenide nanowires were synthesized with an intermixing of wurtzite and zincblende structure by chemical beam epitaxy with the vapor-liquid-solid mechanism. Resonant Raman spectroscopy of the transverse optical phonon mode at 215 cm{sup -1} reveals an E{sub 1} gap of 2.47 eV which is assigned to the electronic band gap at the A point in the indium arsenide wurtzite phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of structural and electronic properties of ScN and ScAs in rocksalt and zincblende structure: A DFT approach

In this paper, we have studied the structural and electronic properties of ScN and ScAs in zincblende (ZB) and rocksalt (RS) phases. We have employed the full potential linearized augmented plane wave (FP-APW) method within the density functional theory (DFT). Generalized gradient approximation (GGA), due to Perdew-Burke-Ernzerhof (PBE) has been used to estimate the exchange-correlation functional. Our band structure results for ScN shows the metallic nature, whereas ScAs shows the semiconducting behavior. The obtained results are in excellent agreement with earlier reported data.

36 MATERIALS SCIENCE↗

Experiment and simulation on one-dimensional plasma photonic crystals

The transmission characteristics of microwaves passing through one-dimensional plasma photonic crystals (PPCs) have been investigated by experiment and simulation. The PPCs were formed by a series of discharge tubes filled with argon at 5 Torr that the plasma density in tubes can be varied by adjusting the discharge current. The transmittance of X-band microwaves through the crystal structure was measured under different discharge currents and geometrical parameters. The finite-different time-domain method was employed to analyze the detailed properties of the microwaves propagation. The results show that there exist bandgaps when the plasma is turned on. The properties of bandgaps depend on the plasma density and the geometrical parameters of the PPCs structure. The PPCs can perform as dynamical band-stop filter to control the transmission of microwaves within a wide frequency range.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural and electronic properties of TiX (X=N, As) in rock salt and zinc blende phase: A DFT study

Quantum mechanical first principle calculations have been performed to study the electronic and structural properties of TiN and TiAs in zinc blende (ZB) and rock salt (RS) structures. The full-potential linearized augmented plane wave (FP-LAPW) method has been used within the framework of density functional theory (DFT). The exchange correlation functional has been solved employing generalized gradient approximation (GGA). Our predicted results for lattice constants are in good agreement with the earlier findings. The electronic band structures of TiX are metallic in both the phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Monitoring of dielectric permittivity in accelerated alkali-silica reaction concrete with microwave backscattering

Deterioration of concrete due to the alkali–silica reaction (ASR) involves a reaction between alkaline ions in the cement pore solution and non-crystalline silica found in many aggregates. The product of reaction is a porous hydrophilic ASR gel, which causes expansion and cracking of concrete structure. Currently, there is no reliable method for non-destructive evaluation of ASR. We have investigated the feasibility of using relative dielectric permittivity obtained from X-band microwave backscattering of concrete. Advantages of this method of concrete evaluation are that measurements are non-contact and one-sided, and the approach is scalable to arbitrary-size concrete structures. The exploratory study was performed using an unrestrained set of accelerated ASR concrete prism specimens developed according to the ASTM1293 standard. One set of specimens contained no entrained air, while another set was contained entrained air. The specimens were removed from the environmental chamber at different times during a year-long study to create a set of different ASR maturity specimens. Strain measurements were performed on all specimens. Strain data both air entrained and non-air entrained sets were shown to be in close agreement with Larive model of isothermal unrestrained ASR expansion with similar fitting parameters. Furthermore, relative dielectric permittivity of concrete specimens was correlated with strain data. Both sets show correlation between dielectric permittivity and strain, with stronger linear correlation observed for the air-entrained specimens. Development of such correlation would enable estimating expansion of actual concrete structures from microwave backscattering measurements, which could be used for risk stratification to guide and minimize coring.

36 MATERIALS SCIENCE↗

Synthesis of (Ga 1– x Zn x )(N 1– x O x ) with Enhanced Visible-Light Absorption and Reduced Defects by Suppressing Zn Volatilization

(Ga 1– x )(N 1– x O x ) (GZNO) particles with enhanced optical absorption were synthesized by topotactic transformation of Zn 2+ /Ga 3+ layered double hydroxides. This outcome was achieved by suppressing Zn volatilization during nitridation by maintaining a low partial pressure of O 2 (p O2 ). Zn-rich (x > 1/3) variants of GZNO were achieved and compared to those prepared by conventional ammonoylsis conditions. The optical absorption and structural properties of these samples were compared to those prepared in the absence of O 2 by diffuse-reflectance spectroscopy and powder X-ray diffraction methods. Notably, suppression of Zn volatilization leads to smaller-band-gap materials (2.30 eV for x = 0.42 versus 2.71 eV for x = 0.21) and reduced structural defects. This synthetic route and set of characterizations provide useful structure–property studies of GZNO and potentially other oxynitrides of interest as photocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnons in one-dimensional k-component Fibonacci structures

We have studied the magnon transmission through of one-dimensional magnonic k-component Fibonacci structures, where k different materials are arranged in accordance with the following substitution rule: S{sub n}{sup (k)}=S{sub n−1}{sup (k)}S{sub n−k}{sup (k)} (n≥k=0,1,2,…), where S{sub n}{sup (k)} is the nth stage of the sequence. The calculations were carried out in exchange dominated regime within the framework of the Heisenberg model and taking into account the RPA approximation. We have considered multilayers composed of simple cubic spin-S Heisenberg ferromagnets, and, by using the powerful transfer-matrix method, the spin wave transmission is obtained. It is demonstrated that the transmission coefficient has a rich and interesting magnonic pass- and stop-bands structures, which depends on the frequency of magnons and the k values.

36 MATERIALS SCIENCE↗

Extracting Inelastic Scattering Cross Sections for Finite and Aperiodic Materials from Electronic Dynamics Simulations

Explicit time-dependent electronic structure theory methods are increasingly prevalent in the areas of condensed matter physics and quantum chemistry, with the broad-band optical absorptivity of molecular and small condensed-phase systems nowadays routinely studied with such approaches. Here, in this paper, it is demonstrated that electronic dynamics simulations can similarly be employed to study cross sections for the scattering-induced electronic excitations probed in nonresonant inelastic X-ray scattering and momentum-resolved electron energy loss spectroscopies. A method is put forth for evaluating the electronic dynamic structure factor, which involves the application of a momentum boost-type perturbation and transformation of the resulting reciprocal space density fluctuations into the frequency domain. Good agreement is first demonstrated between the dynamic structure factor extracted from these electronic dynamics simulations and the corresponding transition matrix elements from linear response theory. The method is then applied to some extended (quasi)one-dimensional systems, for which the wave vector becomes a good quantum number in the thermodynamic limit. Finally, the dispersion of many-body excitations in a series of hydrogen-terminated graphene flakes (and twisted bilayers thereof) is investigated to highlight the utility of the presented approach for capturing morphology-dependent effects in the inelastic scattering cross sections of nanostructured and/or noncrystalline materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen adsorption on decorated graphyne and its analogous with Na

Highlights: • Structural stability of Na decorated single- and double- sided graphyne and its analogous. • Hydrogen storage capacity of decorated graphyne and its analogous, based on Density Functional Theory (DFT) by PBEsol, vdW-DF2-B86R and vdW-DF2 approximations. • Electrical properties like density of states and band gap after Na decoration and hydrogen adsorption. - Abstract: In this paper, we have addressed the structural stability and hydrogen storage capability of single side and double side Na-decorated γ-Graphyne, Graphyne-like Boron Nitride and CCBN-yne, using three methods of density functional theory approximation: PBEsol, vdW-DF2-B86R and vdW-DF2. We also investigated the electronic properties of these structures, decorated by Na atoms and adsorbing hydrogen, such as density of states and band structure. Our results showed that hydrogen can be adsorbed up to three molecules per Na atom. We found the optimal geometries of adsorbed hydrogen molecules on adsorption candidates. We also found that Direct band-gap at “M” point changes after decoration and adsorption in mentioned structures. Finally, we explored metallic structures for hydrogen storage which can be used in the industry of fuel cells.

36 MATERIALS SCIENCE↗

Theoretical studies of strongly correlated rare-earth intermetallics RIn₃ and RSn₃ (R=Sm, Eu, and Gd)

In this paper, the structural, elastic, and electronic properties of RIn₃ and RSn₃ (R = Sm, Eu, Gd) compounds have been investigated using the full potential linearized augmented plane wave plus local orbital method within the density functional theory. The structural properties are investigated using the LDA, GGA, and the band correlated LDA+U and GGA+U schemes. The lattice parameters are in good agreement with the available experimental results and the divalent state of Eu is also verified. The spin-orbit coupling is included in order to predict the correct electronic properties and splitting of 4f states of the rare earth elements is also incorporated. We calculated Bulk modulus, shear modulus, Young's modulus, anisotropic ratio, Kleinman parameters, Poisson's ratio, Lame's co-efficient, sound velocities for shear and longitudinal waves, and Debye temperature. We also predict the Cauchy pressure and B/G ratio in order to explore the ductile and brittle behaviors of these compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultra-short and broadband polarization splitter based on PCF and metal surface plasmons resonance

An ultra-short and broadband polarization splitter based on PCF and metal surface plasmons resonance is proposed by designing a new structure and filling gold wire into certain air holes. The introducing of gold wire aims to couple with the basic modes. Then high birefringence is obtained to improve the splitter’s performances including length, bandwidth and maximal extinction ratio. The numerical results demonstrate that the splitter can be the shortest length of 100 μm (to our knowledge) and the broad bandwidth is 470 nm simultaneously. And when the splitter’s length is set as 104 μm, the widest bandwidth reaches the maximum 575 nm (to our knowledge) which covers almost all the E, S, C, L, and U communication band. In addition, the structure is relatively simple, so it is easy to fabricate using available methods. These properties will help designing splitter in the optical communication and sensing system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigations on the temperature dependent electrical and magnetic properties of NiTiO{sub 3} by molten salt synthesis

Highlights: ► NiTiO{sub 3} particles were synthesized by simple molten salt technique. ► The single phase compound formation was confirmed through XRD analysis. ► The detailed impedance properties of NiTiO{sub 3} were studied at elevated temperature. ► The conductance spectra were fitted using Jonscher Power Law. ► Low temperature magnetization behaviour was explained by core shell model. - Abstract: Submicron-sized NiTiO{sub 3} particles were successfully synthesized by simple molten salt method. The phase purity and crystal structure was confirmed through X-ray diffraction. The characteristics bands of Ni-O and Ti-O were identified using Fourier Transform Infra-red spectrum. The SEM and TEM images shows that the particles are lying in the range of 150–300 nm and selected area electron diffraction pattern (SAED) infers the single crystalline nature of NiTiO{sub 3}. The impedance spectra elucidate the grain interior conducting mechanism and semi-conducting nature of NiTiO{sub 3} at elevated temperatures. The frequency dependent conductance spectra were found to obey Jonscher's power law and a maximum value of conductivity observed was 2 × 10{sup −5} S cm{sup −1} at 520 °C. The magnetic susceptibility measurement infers the antiferromagnetic behavior with the Neel temperature (T{sub N}) of 14.9 K. The increase in coercivity below T{sub N} reveals the coexistence of antiferromagnetic with superparamagnetic behavior. B–H curve represents the first order phase transition from antiferromagnetic to ferromagnetic transition.

36 MATERIALS SCIENCE↗